Don’t down play your knowledge my friend you have one of best channels on KZbin with a wealth of useful information 🙏
@Pyroflorida6 ай бұрын
Thank you bud... I'm always open to show what I know why not man .. thank you for your comment 😊
@usa58656 ай бұрын
I've been making a ton of test spindles lately. For whistle I've found the more taper, the longer the spindle can be without cato. Also, the larger the diameter the less chance of cato. I'm also using aluminum, it works great for testing and it's cheap. When I finally find the one I'm sticking with I make a copy in stainless. The taper also seems to change the sound. 1/2 degree is real fast and powerful but no sound until the delay. 1.5 degrees makes a ridiculous sound right from the time it lights. I'm loving your channel. I'll add a reply to this comment and link a video with the 1.5 degree spindle in a tiny 3/8" motor
@usa58656 ай бұрын
kzbin.infoPEA6sXns-nE?si=aB9lPUQQIw4ik-pU I didn't quite have the strobe mix figured out but the whistle makes the sound I was talking about
@Pyroflorida6 ай бұрын
@usa5865 yes , definitely, you're right , that's a cool effect , I'm getting the same effect with mine when I'm using sodium benzo and pot.benzo on my spindle design let me try to send you a link
@usa5865 sent you your request , to chat out of platform, check your stuff in your channel , you will find it in one of the videos you sent me days ago.
@squigglesmcjr1996 күн бұрын
Thanks
@Theactualcurrentsea8 күн бұрын
Awesome. So F-Ing cool.
@sergioalvescordeiro94955 ай бұрын
Muito TOP!!!👏👏👏👏👏👏👏👏👏👏👏👏🍀🍀🍀🍀💫💫💫💫💥💥💥💥💥💥💥💥💥💥💥💥🎇🎇🎇🎇
@Oklahoma753 ай бұрын
You are a good man! Thx!
@NeDoPyro6 ай бұрын
great video ! informative
@Pyroflorida6 ай бұрын
Thank you !!
@garymoore96505 ай бұрын
To cut down on cato's , wax the inside of the tubes.
@Pyroflorida5 ай бұрын
👍💯
@christianduquette217327 күн бұрын
Verry nice, how to do process to make a nuclear rocket? Thanks
@Pyroflorida27 күн бұрын
@@christianduquette2173 is a hell of a process there.. usually different fuels and different rocket tooling are involved , one day I'll make a vid
@Pyrorocket1237 күн бұрын
If you go through a few of his videos and use your imagination combine the knowledge from his videos and boom u made a nuclear rocket i learned sooooooooooooo much from his channel be extremely careful dont take short cutts
@pedrojover97925 ай бұрын
Thanks for the measurements my friend, impressive power of your rocket.how long the tube,why the fuel is not full to the tube.
@Pyroflorida5 ай бұрын
Can't press all the way to the end of the tube because that will add too much delay to the rocket
@pedrojover97925 ай бұрын
Thanks for the explanations. My friend.this spindle we can use to BP?
@Pyroflorida5 ай бұрын
@@pedrojover9792 it may work wit it but needs to be a very hot very strong bp.. These spindles are designed more for whistle fuels (way faster burning) For BP rocket spindle must be at least 4 inches long if you want a powerful rocket.
@pedrojover97925 ай бұрын
Good evening, my friend. Thanks for the advice.this 4" spindle must be 6" tube for the ratio of 2/3.im very impressed with your workmanship.
@Pyroflorida5 ай бұрын
@@pedrojover9792 thank you sir
@genuine_Yemeni_proverb4 ай бұрын
Do you mean length? 55.13 cm Centimeter or what?
@Pyroflorida4 ай бұрын
55.13 centimeter is a half of a metro!! Of course not! All measurements showed are in millimeters
@长颈鹿-d7v6 ай бұрын
Is there any difference between a spindle with the same upper and lower diameter and a spindle with slope and angle? ? Used for whistle strobe rockets.
@Pyroflorida6 ай бұрын
Spindle must be ( conical with angle) , a straight spindle is almost impossible to remove from rocket motor
@长颈鹿-d7v5 ай бұрын
What will be the effect of a whistle rocket made of main shafts with the same upper and lower diameters?@@Pyroflorida
@Pyroflorida5 ай бұрын
@@长颈鹿-d7v I already answer that.... tooling cant be removed from motor after being pressed if spindle has a straight shape , now if you're able to remove it somehow, without damaging the fuel grain and without having the motor blowing up in your hands ,then motor will probably perform normally
@DIYLOVELOVE6 ай бұрын
Bro can you give me the complete size of the tube and the spundle & Rammer ..thanks always waiting to your Upload ..
@Pyroflorida6 ай бұрын
You already have the measurements of spindle and rammer , motor is 1 pound.( . 75 of an inch) internal diameter, lenght of tube is exactly 3.5 inches
@DIYLOVELOVE6 ай бұрын
@@Pyrofloridathanks Bro, you always help a lot, like me 1st timer to make a personal stash ..😍
@DIYLOVELOVE6 ай бұрын
@@Pyrofloridacan I use that tool size and tube size for Gallic acid mix & sodium benzoate mix?
@Pyroflorida6 ай бұрын
@@DIYLOVELOVE since the moment that I dont use gallic acid in my whistles I'm not really familiar with the power that it can generate of how fast it will burn.. can't tell you if that spindle will work on it or not Spindle is designed for high end sali whistle rockets
@DIYLOVELOVE6 ай бұрын
@@Pyroflorida alright Thanks Bro .. but if I use Sodium Benzoate for 4inch tube 10mm i.d , what size of spindle the best to use?.
@PyroPassion566 ай бұрын
Could you do a tutorial on how to make a small ground salute like 5 grams or smth, bc i dont know if my tactic is good enough and idk if im getting most of my flash powder.
@Pyroflorida6 ай бұрын
I will , that's very simple .. what type of flash powder are you using?
@PyroPassion566 ай бұрын
@@Pyroflorida Im using Kno3/mg/s As i said in other comment i succesfully made it super fast. I can make firecrackers, but i really want to know your technic on making them. I wanna get the most out of my firecrackers
@Pyroflorida6 ай бұрын
@szymoneq56 ok let's give it a try ... stay tuned!!
@Gasher82nd6 ай бұрын
Do you sell these tooling or can you buy these tooling ? cheers
@Pyroflorida6 ай бұрын
I make my own tooling , I'm saving money and a I custom make them for my own needs, not intended to sell them, too busi for that , you can order good quality rocket tooling of all types from woody's rocks , I'm pretty sure they ship internationally
@Popsontheblock2 ай бұрын
@@Pyroflorida Beginner here which Tools do you recommend I purchase from Woody's ? I don't want to over purchase Thank Your for the videos your help is much appreciated
@Pyroflorida2 ай бұрын
@Popsontheblock yes , Woody's manufacturers very good tooling and offers good support if you need it , if never pressed rockets before I'll suggest to start with the 4oz platform. They are decent on size and they can go very high . The extreme model allowes you to make BP rockets and whistles as well. I always suggest to start with BP rockets and after mastered continue with more sensitive fuels like whistles and strobes. A press is a must for those , keep that in mind
@Popsontheblock2 ай бұрын
@@Pyroflorida I wanted to start with 3/4 1lb I'm confused on the tooling since they have BP, Sali, Strobe tool kits dont know which one to go with I have a press already Ive actually created some of your formulas ive watched your videos like 100+ Gracias por responder
@Pyroflorida2 ай бұрын
@@Popsontheblock 3/4 inside diam is the 1 pound tooling
@HenrikSherwood6 ай бұрын
Some advice, you should use fast blackmatch in between your rocket motors on the nuclear and multi stage motors, it aids ignition
@Pyroflorida6 ай бұрын
I did it before and it worked flawlessly, I don't think that the black match inserted on the sali motor will cause any overpressure on hot fuel I hope
@HenrikSherwood6 ай бұрын
@Pyroflorida What I do is I clean the top of my motor so it adheres better and use an unplugged hot glue gun to glue a row of match in, I do use a low temp one but I don't think the high temp ones even get hot enough to set anything off. I use like 5-8 strands in between along with a small amount of tissue paper in the top of the first motor to stop overpressure
@Pyroflorida6 ай бұрын
@@HenrikSherwood that's a good technique right there👍
@blackpowderMix5 ай бұрын
Good day mate! I made a short cored spindle for my Na.Benz fe2o3. Spindle length was 1.5 inches and it produces weak thrust. Somebody told me in a forum that short core on a benny whistle must use oxychloride or a sali on fe2o3. My question is for my 1/2” rocket, how long should be the spindle or the core of the motor if im using 4inches tube. Im thinking 2.5inches plus .5inches hollow space and the rest is for the delay and bulkhead. Also, when it launches it has a popping sound at the core. My composition is 70:30:1:4. 1 red iron oxide and 4 mineral oil. Why is that happening, it is like strobing thus producing less thrust.
@Pyroflorida5 ай бұрын
Sodium benzo is too weak to perform well on a 1.5 inch spindle, even with cu oxichloride may not perform as expected. Red sali or KHP will work pretty well . Typical from sodium benzo to make pops when used on a hollow core , that's normal , I have a couple of vids where that happens with benzo. For a four inch tube I'll definitely go for a 3 inch spindle , .75 delay .25 head space That will work with benzoates and salicates (wax your tubes ) when going for red iron or oxichloride sali.
@blackpowderMix5 ай бұрын
@@Pyroflorida thanks for the recommendation! So benny with iron oxide is too weak for short cored motor. How about for my next project? 16mm id with 6inches tube? Go for the same 5inches spindle and .75delay plus head room? This is good because i can use the same tube length for both whistle and bp cored motors.
@Pyroflorida5 ай бұрын
@HotBPmix 16 mm Id that's correct?
@blackpowderMix5 ай бұрын
@@Pyroflorida yeah mate. For 8oz rocket. Isnt the delay very short and will cause a blowout.
@Pyroflorida5 ай бұрын
@HotBPmix on a 8 oz 6 inch tube I'll probably go for a 5 inch spindle for bp rockets and a no more than 4 inches for whistle or any red line fuels , spindles for whistles are bigger in diameter when compared with bp spindles, I other words.. if you press whistle on a BP type 5 inch long spindle it will CATO all the time , unless you use HP140 -4-c That is a whistle fuel meant for lifting heavy stuff on long spindles