@hunterriley9904 3 жыл бұрын
Holy crap that looks good. That would really dress up the inside of my C30 crewcab. Great job !😎
@SOU6900 8 ай бұрын
I put LED bulbs in my cluster for my 86 K2500. There's one little quirk about them being that whenever I open the doors the power back feeds the cluster and makes the LEDs for my high beam and turn signal indicators light up slightly. Thinking of changing those 3 back to regular bulbs and just seeing how it goes.
@MC2RD 2 жыл бұрын
I did that about a year ago. It really make it better looking for sure!!
@jorgel.hernandez6238 4 жыл бұрын
Homie really bumpin Htx😂👏🏽 that’s was up
@armygreenfj3924 Жыл бұрын
Im doing this for my blazer..looks good!!!
@therealchucktaylor3392 4 жыл бұрын
Here that Pat in the background ! 🤙🏿
@craigdecolumbian2688 3 жыл бұрын
Great job im gonna do that to my 89 burban !!! Thanks bruh !
@ebkbode 3 жыл бұрын
Thanks, I still like it too! 🤙🏻
@user-vv7xz6js5b 4 жыл бұрын
ابدااااااااع تحيه من Saudi 🇸🇦 ❤
@SOU6900 2 жыл бұрын
Should probably replace my bulbs and bulb holders on the cluster for my 86 while I have it out of the truck to replace the PCB.
@michaelcole7313 2 жыл бұрын
Looks awesome
@daviddixon1981 4 жыл бұрын
We can get gansta!! 🤘🏾
@ebkbode 4 жыл бұрын
David Dixon Hell yeah!
@bretbarnes2224 2 ай бұрын
Wow. Excellent. Thank you for showing this
@donnieevans7130 5 жыл бұрын
Nice work.
@ebkbode 5 жыл бұрын
Donnie Evans thanks man
@CrashFix 5 жыл бұрын
Looks pretty good! 👍 So to get at the bulbs do you just have to remove the screws for the silver trim panel, then remove the clear plastic that covers the gauges? What about the heater control, did you put LED’s in there as well?
@ebkbode 5 жыл бұрын
CrashFix yeah the outer gauge panel just has screws, and there’s a connecting panel under the steering column. Yes the temp gauge light was changed as well. Hope that helps 👍🏻
@shawndunbar7156 4 жыл бұрын
@@ebkbode i have a 85 c10 i was told i have to pull clusters out to access bulb but you said i can get them from the front? Will needle nose do the trick ?? Thanks
@ebkbode 4 жыл бұрын
Shawn Dunbar Yeah. I have a set of thin needle nose pliers. Duckbill pliers would probably work too.
@southernchevykid8649 Жыл бұрын
@@shawndunbar7156 g flew
@BCBennyCAN2 4 жыл бұрын
cool, ever replace the Headlights I have a old 1980 van 3500 motor home and I think they are just a standard LED on Amazon but just looking for more information. H6054LL(2PCS)
@ebkbode 4 жыл бұрын
Benjamin Stewart No, the headlights are sealed. There are LED headlights, but I believe they require a new compatible harness/connector spliced into the headlight wires.
@Victor-bf9jn 4 жыл бұрын
Can you make a video about that too?
@dylanmcdonald7765 3 жыл бұрын
Did you have to remove the needles for the overlays?
@ebkbode 3 жыл бұрын
No sir
@shaneallen5739 3 жыл бұрын
Does the dim work or are they full blast all the time?
@ebkbode 3 жыл бұрын
Yeah the dim still works
@raisinhellandpraisindale5640 2 жыл бұрын
How'd you get the aftermarket gauges in place of the old ones?
@ebkbode 2 жыл бұрын
They were previously installed, so I’m not exactly sure. I’m guessing they wire up and then get inserted?
@joseluismanzanedabedregal5811 3 жыл бұрын
Necesito ese panel completo urgente
@rudfinnalt676 4 жыл бұрын
Where did u buy that
@ebkbode 4 жыл бұрын
It’s in the description... 👍🏻
@jontowers4841 4 жыл бұрын
How hard was it to install vintage air
@ebkbode 4 жыл бұрын
jon towers it was installed by the previous owner
@jontowers4841 4 жыл бұрын
@@ebkbode How you like it. Any down falls.
@ebkbode 4 жыл бұрын
jon towers it definitely blows cold air, but I sometimes wish I had the stock A/C. Vintage Air takes up the glovebox space. I had to customize a narrow glovebox, but at least there’s room for documents. 👍🏻
BROTHERS Truck Parts
Рет қаралды 46 М.