Why Are THESE Amazon's BEST Selling 3D Printers? Anycubic Photon Mono 6Ks vs. Creality Halot Mage 8K

  Рет қаралды 38,398

Elevated Systems

Elevated Systems

Күн бұрын

Пікірлер: 65
@tomaskianicka3343
@tomaskianicka3343 Жыл бұрын
Just a minor correction, the pixel size is in um or micro meters. Nanometers are 1000x smaller and are close to the size of atom scale.
@ElevatedSystems
@ElevatedSystems Жыл бұрын
Oops, that's more than a minor mistake ☹️ Not sure why I didn't catch the fact that a pixel isn't half the with of a human hair.
@amraniabdelilah6662
@amraniabdelilah6662 7 ай бұрын
My friend, what printer do you recommend for my dental laboratory? I want one that combines power, ease of use, speed, and accuracy
@eng.Georgi_Hristozov
@eng.Georgi_Hristozov Ай бұрын
@@amraniabdelilah6662 Anycubic
@Arnazisti
@Arnazisti 11 ай бұрын
I'm looking at getting the Mono 6Ks - one big pro thats not mentioned here, Anycubic printers allow you to test multiple exposure settings in one print. That is, you can print 8 calibration models at various exposures in one go!
@reece2080
@reece2080 Жыл бұрын
I've been watching you for about a year now. In my opinion this is the most underrated tech channel. Keep up the good work!
@eng.Georgi_Hristozov
@eng.Georgi_Hristozov Ай бұрын
I got the X6ks and the M5S Pro both are incredible mashines, both working with all resin on the market and the results are amazing.
@dannonyogurt98
@dannonyogurt98 Жыл бұрын
Just picked up the halot mage 8k for only 200 from amazon. I was just seconds away from buying the anycubic 6k for 270 when I saw it and with a discount code I found online I got the creality large cure and wash station too. All in for only 350. Cant wait for them to get here.
@onemansvideos2134
@onemansvideos2134 Жыл бұрын
You get those yet I'm looking to get the same combo
@dannonyogurt98
@dannonyogurt98 Жыл бұрын
@@onemansvideos2134 Yeah but I haven't had the chance to use them yet. Look nice and feel good though. I looked around a lot and I don't this you can do better on the price to quality unless you go to a smaller screen. I am used to FDM printers so 10 inches or more for resin was a must.
@IronicAsAlways
@IronicAsAlways Жыл бұрын
How's it going? I'm stuck between these two.
@RocktCityTim
@RocktCityTim Жыл бұрын
I started with the Creality LD-002H and then a Halot One, but I ran to the Mono 6Ks when I moved into a larger format. I've had success after success with it for both minis and functional engineering parts. And, I chose Lychee and opted for the Pro license to get access to all of Lychee's advanced settings. You're right about both being great, but I just didn't have the room for something as large as the Mage 8K. My go to resins are Anycubic and Siryatech.
@TheCalaudio
@TheCalaudio 11 ай бұрын
Haven't you had problems with lychee in 6ks? I don't like workshop very much
@RocktCityTim
@RocktCityTim 11 ай бұрын
@@TheCalaudio No problems at all on any of my printers - Resin or FDM.
@dalestringer51
@dalestringer51 Жыл бұрын
I recently upgraded from the PhotonS to the Mono X 6Ks. The fine printing is way better than I am use to. However, the are things I love the PhotonS and wish the 6 Ks had. I may be getting a little picky, but here are the things I think the older PhotonS was better with over the 6 Ks: 1) The PhotonS had the square arm bar. I could the build plate 90 degrees and put it back on. This let the extra resin on the build plate drip down(fairly fast) into the resin pan. You can't do that with the 6 Ks. Maybe I can make an arm attachment to do this again. 2) The 6 Ks build plate top is fairly flat compared to the PhotoS's. The steeper build plate top on the PhotonS helped the resin drip off into the pan below. 3) I miss the three fixed sides and lift-up front on the PhotonS. The 6 Ks top has to be set aside somewhere and I don't have a lot of room. 4) The resin pan hold down screws on the 6 Ks are a pain, since you need to completely unscrew them to get the pan out versus just loosening them up on the PhotonS.
@juliemclean6743
@juliemclean6743 11 ай бұрын
Thanks so much for this in-depth comparison as I'm tossing up buying either the Creality or Anycubic printer. I have a traditional 3D printer but am only now venturing into resin printing so your straightforward, non-tech explanations help immensely... though I'm still tempted to buy both just because... ;)
@caimano55
@caimano55 Жыл бұрын
Nice to see you well again! Thanks for the great content as always!
@pyroslev
@pyroslev Жыл бұрын
My Ender 3 has lost its luster and I've been looking at new printers. Resin's mess is still a little offputting but I think if the Creality one drops in price over the Holidays, I'll grab that and give it a try.
@khriss556
@khriss556 Жыл бұрын
Guess what? The creality one's dropped in price. By a LOT.
@YoloVib3s
@YoloVib3s Жыл бұрын
Got our first Bambu P1S 3 weeks ago … currently waiting on the second one to arrive & ordering 2 more in a few weeks! Love this thing!!!
@Douglas-nu2hx
@Douglas-nu2hx 2 ай бұрын
I love my p1s
@ezekielgskeen8607
@ezekielgskeen8607 5 ай бұрын
I am a starter within the printing game, and thanks to people like your self, get to know how to get started! But! I really would love, if you have time, to say at what temperature should I keep my resin when not in use, the help would be grateful, thanks, UK🔥🔥🔥🔥🔥🔥
@ElevatedSystems
@ElevatedSystems 5 ай бұрын
Storing it at room temp is fine, just pay attention to the expiration date. Photoresin only has about a 6 month shelf life.
@ezekielgskeen8607
@ezekielgskeen8607 5 ай бұрын
@@ElevatedSystems Thank you! thank you for your well needed help, am hope to do stop motion and build faces in blender to be printed and, and feel more understanding on not to spend money to quickly! thanks To your insight! stay amazing, thank you sir! VERY INFORMATIVE CHANNEL!! UK 👍👍👍👍👍👍
@gorrestfump1237
@gorrestfump1237 3 ай бұрын
at around 5:23 you said pixel density but meant resolution, as pixel density is the stat that matters, not resolution. It is incorrect to say that pixel density doesnt matter, because that metric is directly tied to the pixel size in micro meters. Very informative video otherwise and I am glad i watched!
@bryanduncan6954
@bryanduncan6954 Жыл бұрын
Have the Halot Mage… at first I was frustrated by print errors… but once I started using the Halotbox slicer and changed a defective FEP… it’s been phenomenal
@M4r11on
@M4r11on Жыл бұрын
i got some jelly resin on VAT ?
@foam27
@foam27 Жыл бұрын
huh?@@M4r11on
@AwSmMascaraXx
@AwSmMascaraXx 11 ай бұрын
Elegoo 4mars max or anycubic photon mono x6ks?thanks
@amraniabdelilah6662
@amraniabdelilah6662 7 ай бұрын
My friend, which printer do you recommend for the dental laboratory?
@sxynixs7536
@sxynixs7536 Жыл бұрын
The Crealitys 8K screen makes textures, details, and minis pop with stunning clarity
@nrt2187
@nrt2187 Жыл бұрын
The Halot Mage Pros early bird price had me sold. Its a real bang for the buck, and Im eagerly waiting for my confirmation email.
@jsnow1774
@jsnow1774 Жыл бұрын
Hello I bought a 6ks and was wondering what slicer do you use? I've tried the photon workshop and chitubox but both crash while saving the sliced file and just wanted to know
@nvxmusic6966
@nvxmusic6966 Жыл бұрын
always satisfy with my ender 3v3 se, as it can provides all I needs. but I think the Creality Halot mage 8k can be my next advanced one.
@satishgautam565
@satishgautam565 Жыл бұрын
The resin pump on the Halot Mage Pro is like a well-behaved genie - it grants my wishes without the mess. A must-have feature!
@prokanalhd2485
@prokanalhd2485 Жыл бұрын
Printing with the Halot Mage Pro has its software quirks, but thats a small price for the exceptional print quality it delivers.
@muhammednazal1806
@muhammednazal1806 Жыл бұрын
Overall, it looks like a fantastic printer for both beginners and experienced users. Im seriously considering getting one!
@channelfunnystard.s4120
@channelfunnystard.s4120 Жыл бұрын
Size does matter, and the Halot Mage Pro proves it. With its impressive build volume, I can dream bigger and create larger.
@dondai3345
@dondai3345 Жыл бұрын
Despite software hiccups, the Halot Mage Pro shines with its print quality. Its a true champion in delivering intricate details.
@akgamingworld8084
@akgamingworld8084 Жыл бұрын
So happy to hear that Creality is reducing prices during the holidays. I gotta buy k1~
@onemansvideos2134
@onemansvideos2134 Жыл бұрын
Same I'm waiting on my combo
@ariesyusuf6344
@ariesyusuf6344 Жыл бұрын
Crealitys Halot Mage Pro takes SLA printing to new heights. Easy setup, minimal fuss - just what I needed in a resin printer.
@caochibao8662
@caochibao8662 Жыл бұрын
I took the plunge and got the Halot Mage Pro - what a steal! Its specs are impressive and offer more value compared to other popular printers.
@blakelove4058
@blakelove4058 Жыл бұрын
So. How big can you actually print with this printer? Does it all depend on how you cut and slice your model??? whats the biggest anyone has printed with this particular printer?
@Jokerman0587
@Jokerman0587 Жыл бұрын
what was your MOS bro beans?
@ElevatedSystems
@ElevatedSystems Жыл бұрын
11B for 1yr, > 13B for 4yrs, > 68S for 16yrs.
@cdb1774
@cdb1774 Жыл бұрын
From miniatures to busts, the Halot Mage Pro delivers stunning results. Despite some software issues, its a resin printing powerhouse.
@hamzamughal1179
@hamzamughal1179 Жыл бұрын
The resin pump on the Halot Mage Pro is a lifesaver for loading resin. No more spills - just smooth and efficient printing.
@familiarroaster2080
@familiarroaster2080 Жыл бұрын
Halot mage pro is amazing! It gets me how a flat or supposed flat plate can look like this.
@shinkencarlos
@shinkencarlos Жыл бұрын
Super useful, thanks
@ahsantechandgaming4398
@ahsantechandgaming4398 Жыл бұрын
Super love your video!
@bannerofchristministers1933
@bannerofchristministers1933 Жыл бұрын
thanks for sharing!
@ourgoldengym
@ourgoldengym Жыл бұрын
Im a fan of Creality and I have to say that Halot Mage Pros hardware features are real winners. The carbon filter and resin pump add practicality to the printing process.
@codmobile6915
@codmobile6915 Жыл бұрын
Im loving the compact design of this Creality halot mage. It wont take up too much space on my desk.
@M4r11on
@M4r11on Жыл бұрын
Guys, run from halot mage. !!! i have one.
@IronicAsAlways
@IronicAsAlways Жыл бұрын
Uh ohhhh, why is this? I'm trying to find one for my preteen kiddo. Scared to buy a hunk of junk. 😢
@rodolfo_23
@rodolfo_23 Жыл бұрын
why?
@colinarmstrong1892
@colinarmstrong1892 10 ай бұрын
Those carbon filters only remove odour not all the dangerous volatile organic compounds that are hazardous to health. So not much of an advantage one printer having one.
@ElevatedSystems
@ElevatedSystems 10 ай бұрын
Then how would you explain the carbon filters in my Niosh certified respirator? Activated carbon does remove VOCs. You’ve been misinformed.
@itazokiv2615
@itazokiv2615 Жыл бұрын
Creality wins~
@tonox2_chyt
@tonox2_chyt Жыл бұрын
Its not suprise for halot mage is the best seller in Amazon for its affordable price and amazing 8k tech....
@ThatGuy-mp9og
@ThatGuy-mp9og 11 ай бұрын
Creality sure loves making sure you know your printer is turned on
@PrehistoricTopics
@PrehistoricTopics 6 ай бұрын
8:42 hey give me my PS4 back
@sammy61187
@sammy61187 5 ай бұрын
That's because Creality machines suck... They always have
Resin 3D Printing Wasn't What I Expected. AT ALL.
21:59
The Next Layer
Рет қаралды 150 М.
Elegoo Saturn 4 Vs Anycubic M7 Pro - Isn't it ALREADY OBVIOUS?
23:59
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
Resin Manufacturers have been LYING to you
25:33
Once in a Six Side
Рет қаралды 156 М.
M4 Mac Mini vs Intel and AMD Flagships - It's Not Even Close!
17:28
Elevated Systems
Рет қаралды 461 М.
Creality Halot Mage S Review - Let's play SPOT THE UPGRADE?
28:33
Resin 3D Printing for Your Shop? | Creality Halot Mage 8K Printer
12:38
Paul's Garage (Paul's Garage)
Рет қаралды 97 М.
Resin Printing Is Easy...Right? - feat. Anycubic Photon Mono X2
19:43
Canuck Creator
Рет қаралды 67 М.
Is 6K The New Standard? Anycubic Photon Mono X 6K Review
17:54
This $259 8K Resin Printer Is MUCH better than you think | Creality-Halot Mage 8K
8:18
How much do 3D Printed Miniatures Cost?
19:39
Hellstorm Wargaming
Рет қаралды 665 М.
Resin Printing IS Killing You..!
12:20
Keep Making
Рет қаралды 428 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19