Why Doesn't My Vinyl Stick To The Shirt?

In this video I answer a question about Using the right vinyl for the job.
Still tryna figure out what HTV to buy? Check out my sample pack BigBrandoh.com I put together samples of all the transfers I currently use and also one of my favorite HTV's that i been using. Test them all out before you place your order, make sure you can lay it down and like the feel of the print.
Support the channel and learn more about starting a clothing brand from home. Check out Patreon.com/BigBrandoh
Check out my E Books, T Shirts, Blank Masks and Sample Packs BigBrandoh.com
Follow me on Instagram @BigBrandohTV
The Best Heat Press to get started with
CraftPro.BigBrandoh.com
The Heat Press that I use
SigSeries.BigBrandoh.com
The Hat Heat Press that I use
shrsl.com/2gw8d
Heat Presses for all budgets
shrsl.com/2f0wd
Cameo Vinyl Cutter
shrsl.com/29zpz
BFlex HTV
BFlex.BigBrandoh.com
ThermoFlex HTV
ThermoFlex.BigBrandoh.com
Siser Easyweed HTV
shrsl.com/1z0qf
Supacolor Transfers
Supacolor.BigBrandoh.com
Shipping Supplies and Heat Press Supplies
Poly Mailers, Scales, Laser Thermometers, Safety Rulers, T Shirt Folders, Clear Poly Bags, Cutting Mats etc.
www.amazon.com/shop/bigbrandoh
Sawgrass SG400 - Sublimation Printer
shrsl.com/1yzmw
Heat Press Base Cover
shrsl.com/1ud1q
Blank T Shirts
Blanks.BigBrandoh.com
If You Need a Graphic Designer. Look up these guys on Instagram:
@aka_jerry_m @Dizmajiz @Rawtoons @BrentTab

[@ParadiseBrothers]

Please continue to make these videos. I’ve saved thousands of dollars just using your tips and tricks. Continue to share your knowledge to those who need it. We appreciate you more than you know!!

[@BigBrandoh]

i appreciate this. thanks for watching

[@johnmontanez230]

this guy explains it the best

[@universeknowledge3346]

I m giving you whole setup @44999 if you want plz contact 9754009556

[@ThriftyDad]

I’m working on doing vinyl on clothes and been watching various peeps trying to learn and you are by far the best and most informative. Thanks bro.

[@universeknowledge3346]

I m giving you whole setup @44999 if you want plz contact 9754009556

[@TheDojoboi]

I watch alot of other people's views on all t shirt subjects. I feel like your videos are way more informative than other guys. Keep it going your helping my business alot

[@mark97213]

I tried to apply a COLT decal to a sweatshirt... no go. Your explanation sounds exactly right. Wish I could find a COLT decal that I could iron on my sweatshirt.

[@erriort]

Damn this helped me. I was gonna try to iron on a decal vinyl and I was wondering why it seem right. It's my 1st time using a Cricut and I thought I had to mirror this to out on a tshirt so not only did I get the wrong vinyl, I also mirrored it for no reason. 🤦‍♀️

[@BigBrandoh]

im here to help! haha i made a shit load of mistakes when i was learning. also wasted alot of money. i make these vids to help save people time and money and headaches hahaha thanks for watching

[@sandraspartyfavors]

Thank you so so much for sharing I was wondering what was I doing wrong😭😭 I’m happy I came across your video

[@BigBrandoh]

thanks for watching

[@ORGANICPANIC]

Bug brandoh always has game!! Such a necessity for my business ❤️💯💪🏼😎

[@oclashes6922]

"For shit like that" lol! Love it🤣 speaking as yourself. Great tips👍

[@BigBrandoh]

hahaha thanks for watching

[@kable1982]

Huge help!! I was wondering why my logo was sticky on my shirt...now i know why i was using the wrong one!

[@BigBrandoh]

haha not a problem. happens to all of us. thanks for watchin

[@metsworldlifestyle1073]

very helpful and educational for a rookie like me lol ,thank you for sharing this!! appreciate it!

[@BigBrandoh]

yoooo thanks for watchin! i really appreciate it!

[@mzvon2s811]

*Dude... Thank you for this informative vid. I'm new & trying my best to learn the variety of terminology and what flipping heat transfer tape and vinyl I need for my t-shirts.

[@futuristicstoic]

Thanks bro, good seeing u more often!

[@BigBrandoh]

thanks for watching

[@MAHWL]

Hey what's up?!! @Big Brandoh.. I was searching videos on reflective permanent/decal and htv so I'm wondering if you've worked with it or have a video with your recommendations?? 🤓🤓🙏🙏🙏 please do one if you haven't done one but have used it!! I love your videos and knowledge!! ... No complaints here!! 😂😂 I've learned so much from you!! 🤓

[@BigBrandoh]

i got a vid showin EconoReflect

[@MAHWL]

Thanks I'm gonna check it out again cuz i don't think cricut has any at least not the stores i checked today

[@directedbytlor9584]

Very helpful , this the only video I found that answered the question

[@BigBrandoh]

glad i could help! thanks for watching!!! 👊🏾

[@oshaneb3176]

Thanks for making this, i just got into vinyl work, and its very satisfying. I tried sticking my "htv yrym" to a cotton shirt and it came out slippery and gooyie

[@ascentofarose2001]

Hi from Australia. Thanks so much . I’m new to this and you’ve given me such useful information

[@discord1317]

For the love of God, Thank you so much for getting to the point quickly. I can't tell you how many videos I've seen where I can't finish the video because of how over the top and fake they are, not to mention long winded. I Loved this video short, sweet and to the point!!! I will definitely be subscribing.

[@MiguelLopez-wu5qd]

Thanks bro was trying figure out why and I was using decal 🤦🏻🤦🏻🤦🏻 thanks brother

[@shellgiron]

brooooooo finally someone that explains..... thank you

[@LaniR3d]

This happened to me last night. Smh. My first press I was so lost. Why it wasn't sticking at all. I had some premium vinyl but I believe it was made for a different type of craft

[@lagalaxy1709]

Thanks for the video. New to this DIY cricut stuff...wondering what’s the name of the store that you mentioned? Would love to stock up on some stuff.

[@BigBrandoh]

check the links in my bio or if you are in LA check out mclogan or printer supply. both cool shops to buy vinyl

[@lagalaxy1709]

Big Brandoh sweet thank you! Yes in LA area :). Love your tips! Much love

[@RaiderESCO]

thank you thank you thank you!!! this was the most helpful video I found. I had no idea what the difference was before. lifesaver

[@alexrromero2273]

sup Ese checking in wit you dang you got alot of new videos keep em coming oh yeah you finally talked me into getting it got a Cameo 3 haha.still need the HeatPress though...and some HTV. and ØraCal transfer paper too...

[@BigBrandoh]

hell yeah! thanks for checkin in homie.

[@tvg5477]

Hi!! First of all thank you for guiding me to buying my heat press! I have a question. My vinyl is peeling off after washes. I'm using siser easy weed, heat pressing at 320 for 5 sec peel of and then press for 20 sec. I'm using Rabbit skin and bella and canvas tshirts 100% cotton both. TIA

[@ravvent6787]

How is your pressure on your heatpress? Also make sure to use check the temp to ensure your temp is accurate.

[@MrsRia79]

Try firm pressure at 305 degrees for 15 seconds. Make sure you have a smooth surface when you’re pressing. It you’re pressing toddlers or infants you might need a pressure pillow to make sure even pressure is distributed throughout your material. Also, wash inside put on delicate cycle cold. Hang dry if you can or tumble dry. Wash 24 hours after your initial press. Try that and see if it helps.

[@BigBrandoh]

i would suggest heavier pressure ans pre press the garment to ensure all moisture is out before applying HTV.

[@ravvent6787]

@OG SPORTS COLLECTIBLES there should be a turn knob on the heat press itself

[@NRainharris]

Thanks. Was using the shinny one.

[@BigBrandoh]

thanks for watchin

[@summers9974]

I HAVE A QUESTION . I BUY CRICUIT IRON ON MATERIAL USED FOR SHIRTS NOT FOR 100% POLYESTER. BUT THE SHIRTS I BUY ARE 60% COTTON ANS 40 POLYESTER... MY IRON ON DOESNT STAY . I TRIED SPORT MATERIAL IT STICKS BUT HESITANTLY... HOW TO STICK THE IRON ON SHKULD HEAT BE INCREASED ?

[@BigBrandoh]

my guess is try heavier pressure with your heat press and maybe try pressing hotter. i've never used cricuit vinyl before so im not familiar.

[@heaven29k]

Hi Brandon, I bought oracal 651 permanent vinyl no instruction no holes on the sides, I dont know where is this for 😊

[@BigBrandoh]

that is decal vinyl for windows and signage. heat transfer vinyl is usually labeled as heat transfer. and comes with application instructions

[@DIVABOO225]

Hello say for example I have 30 shirts to make the design is 11.5x20 how many sheets/yards of htv will I need ?

[@BigBrandoh]

i dont know. hahaa you gotta do the math. you know your dimensions of your design. find out how many inches in a yard and then start adding it all up till you get your number

[@DigVision]

Are your tatoos heat pressed or vinyl stickers ;)))))

[@BigBrandoh]

sublimation hahahaaa

[@DempsDesigns]

@@BigBrandoh great answer hahaha!

[@jasminecoleman1228]

Kelly Kelly hjjjiioki

[@ynellirosas]

i'm ded! lol

[@universeknowledge3346]

I m giving you whole setup @44999 if you want plz contact 9754009556

[@DempsDesigns]

So I recently got a Cricut Air 2 and it came with Removable Vinyl.. is that the same as the decal vinyl you speak of in this video? Thanks

[@BigBrandoh]

yes. they have removable and permanent decal vinyl.

[@DempsDesigns]

Thank you for answering! I tried a project last night and it did not cut through the vinyl. It only scratched it lol. I had it on iron on. Do I need to use a different setting?

[@BigBrandoh]

sorry but i never used a cricut before so i dont know anything about that cutter.

[@GoProGoalieUzi]

lfwalker 83 I have a cameo. Try adjusting the sharpness of the blade..I think you have to adjust the setting...

[@susanapadron3101]

This is all new and was exactly my problem. Thank you. I'm using your links. Much appreciated!

[@galepipkin4342]

Brandoh thank you 2st time watching. Im a beginner at this. I purchased a cricut I need a heat press what do you recommend?

[@BigBrandoh]

i like the craft pro by hpn. best functions for the money! craftpro.bigbrandoh.com check out the specs and see if it fits your budget and your needs. i also got a video about the 9x13 version.

[@Shanieceashley_]

I needed this , thank you . This was very helpful.

[@BigBrandoh]

glad i could help! thanks for watching

[@LyndsieIsrael]

We seem to have a similar issue but the vinyl looks raggedy after It’s went thru the washing machine. Is this the same type of issue?

[@BigBrandoh]

raggedy as in peeling off? or cracking? peeling usually happens when its applied with not alot of pressure. try increasing the pressure. also pre press the garment before applying HTV to get all of the moisture out. cracking might happen when its applied with too much heat. try decreasing the temp a little. always double check your temp with a laser thermometer to get an accurate reading.

[@maycuarecamacho]

Nice info, very helpful thank you sir🙏☺️

[@krystaldiaz7667]

What HTV would you recommend for 100% polyester? Sister Easyweed? Easyweed stretch?

[@BigBrandoh]

polyester is tricky. i would use bflex. for its low temp and quick press time. whenever you press on polyester you run the risk of dye migration. thats when you heat up the material and the color migrates on to the print. say you got a red shirt and you press white htv on it. dye migration will turn that white htv to like a pinkish color

[@crystalleemariereyes913]

When I hear press vynl sometimes it leaves bubbles when I lift up, do you know how to fix that?

[@thtskng3986]

I hear vinyl and gildan shirts is bad because when u wash the shirt it comes off is this true? If so what shirt brand is good for vinyl

[@BigBrandoh]

the vinyl brand and the t shirt brand have nothing to do with the print coming off the shirt. whoever told you that, wasnt applying that vinyl correctly on that shirt. buy any 100% cotton shirt and apply any htv made for cotton

[@thtskng3986]

@@BigBrandoh thx big bro!💙

[@lisamarie7373]

Can you plz plz plz! Tell me why is it that I’ve purchased two different hoodies from two different ppl who use heat press and when I rub on the shirt you can feel the vinyl. I’ve had shirts in the past where there were words or images on it and you the vinyl blended into the shirt. What procedure do you use to get it that way Heeeelp!!!

[@cannabisescape3453]

What vinyl would I use for a 50/50 blend of cotton and polyester? Please , need help

[@jaysundalo1]

GOOD DAY SIR! Out of topic question. How can I remove vinyl residue from the shirt? I already remove the vinyl itself, problem is there is still a sticker residue. Badly need help.

[@BigBrandoh]

try using VLR. you can find it at hpn.bigbrandoh.com

[@lalaavuitton6392]

I pressed a design and when I went to peel the tape off the design came up with the tape like it didn’t press into the shirt at all I’m so confused

[@JoshJourney1]

So basically cricut everyday iron on is not made for cotton ?

[@BigBrandoh]

i have no idea what cricut everyday iron on is made for. i've never used it. it should say on the label what it can be pressed on

[@savannahbustamante2131]

So I have a heat vinyl I been trying to make it stick to the t-shirt. I normally do a front and back t-shirt. But today the front not sticking

[@RonnyCuamatzi]

Yeah I bought one that was HTV vinyl and the shirts didn't turn good lol the transparent side wasn't sticky either like the one that came with the cameo printer need some help..

[@BigBrandoh]

what do you mean didnt turn good? if you bought htv made for cotton and you pressed it on a cotton shirt and it didnt work, you might need to adjust your application settings.

[@RonnyCuamatzi]

@@BigBrandoh like the vinyl wouldn't stay on the shirt after I would heatpress it and afterwards after alot of presses even burned the shirt but that was on me and ill do that thanks bro

[@mlfshaike]

so does heat transfer vinyl have the "white" glossy type of paper on the back of it? I'm struggling!!!

[@BigBrandoh]

all the HTV's ive used has a clear backing. all the decal vinyl i've used has a paper backing

[@21VIDEOZ]

Our heat transfer vynil peels off after a wash... We buy the cricut heat transfer vynil and use it on cotton T-shirts. The problem is that it always ends up peeling off slowly after each wash. Is it the material or is there a method to heat pressing this ?

[@BigBrandoh]

most of the time peeling happens when htv is not applied with the correct pressure or when its applied to a shirt that holds moisture. 2 things to try out, increase the pressure on your heat press. go as heavy as possible. if it has a knob on top, crank it down all the way and then back it off a turn or two. or until you can get a solid press and clamp. and make sure you pre press every garment. your shirt might feel dry to the touch but there still might be some moisture held in the material from humidity. lower the press till it touches the shirt for 3-5 secs. if you lift the press and see steam come off the shirt thats the moisture. hope this helps. ive never used cricut htv before. so im just taking a guess at what the issues might be.

[@21VIDEOZ]

Thank you so much for your reply, very detailed and to the point. I will def be trying these things out. 😊👍

[@bevacole]

Thank you for this informative video. I'm new to this vinyl stuff and yes I ordered the wrong type to put on a tshirt. This video saved me! (Bev 10/11/2019)

[@BigBrandoh]

we've all made that mistake before. thanks for watching!

[@besocialskincare808]

Is there a general temp for siser HTV. Fpr the first time today some of the vinyl was not sticking.

[@ecko4052]

Well there the awnser to my question thanks G

[@MinnieMouse246810]

I’ve been doing cotton tshirts for a few months now and haven’t had any problems. Recently I did an order of Dri Fit shirts and they’re peeling! How do I fix it? I used HTV at 305 degrees with a medium press. HELP 😩

[@BigBrandoh]

gotta make sure what material the dri fit shirt is made out of. if dri fit isnt 100% cotton the htv you been using for 100% cotton might not adhere to the dri fit shirt. gotta buy htv based off of the material you are pressing on.

[@AYO_BRAINZ795]

I got a question bro .... Can I use iron on vinyl on my heat press I got some glitter vinyl and it's not sticking

[@AYO_BRAINZ795]

Thanks for your time

[@AYO_BRAINZ795]

I figured it out bro lol I had to let it cool down

[@BigBrandoh]

hahaa glad you figured it out. hahahaa i really didnt have a solution for you. hahahaaaaa

[@brandkangzclothing32]

You did an amazing job with this video bro

[@BigBrandoh]

thanks for watching and reaching out! i appreciate it

[@jujubee7549]

This was soo helpful. Thank you

[@sunshinegaing2238]

Thank you for sharing this valuable information!

[@BigBrandoh]

thanks for watching

[@tailajefferson7045]

Good morning I have a question I made my son shirts but when they wear it the letter comes up I have a heat press I have my temperature at 320 but I don't understand why the letter come up can you store vinyl for a long period of time.

[@BigBrandoh]

its probably your pressure. try increasing it. also use a laser thermometer to get an accurate temp read. adjust the heat. try pressing a little hotter for longer. its all trial and error to find the best settings for your set up

[@adnanidrees6593]

Nice jersey did you make it yourself?? If so where did you get the Jersey and htv

[@BigBrandoh]

nah. this jersey is from www.MitchellandNess.com but if you wanted to make jerseys. you just buy the HTV for whatever material the jersey is made out of. so if the jersey is made out of Polyester. but HTV made for polyestet

[@talkalotnow7852]

Great stuff man said it how it is.

[@BigBrandoh]

thanks for watchin

[@denisejohnston6243]

I have better luck with cricut heat vinyl....but I'll pay more attention! Thanks

[@bitzspiecescreations2159]

Awesome breakdown!

[@blckkatt84]

Whats the address of where you go to buy the vinyl and iron on ??

[@BigBrandoh]

i dont know the address. but check the links in my description. they might have the address on their

[@JamiSwanBeauty]

love your vids thanks so much for all the info!

[@BigBrandoh]

thank you i appreciate that! Thanks for watching!

[@1979joe210]

Decal vinyl won’t stick to the lid of my yeti cooler any idea what I’m doing wrong? The lid has a lil rough texture on top the vinyl sticks real good to the front and back where it’s smooth?

[@BigBrandoh]

yeah it might be the lids texture or try wiping the lid down with alcohol. there might be a silicone film still on the lid from when it was molded. but im not exactly sure what the issue is because i have never attempted putting a decal on a yeti cooler.

[@Liljcomo]

would a siser glitter easyweed htv work for a 90% poly/ 10% spandex jacket?

[@BigBrandoh]

not sure. i never pressed on a jacket like that. im guessing as long as the htv is made for those materials it should work.

[@doroteoalvarez8596]

Picked up some HTV. It says it's iron on I don't see no temperature to set my heat press too, on the instructions. What temp do you reccommend? Thanks

[@MrsRia79]

Temp depends on two things. Type of vinyl and type of material. 100% cotton is usually 305 degrees at 15 seconds with easyweed HTV. firm pressure.

[@BigBrandoh]

i have no idea. all HTV i purchase comes with application instructions. application settings depend on the adhesive used to apply. no standard setting. all htvs are different. i would contact the supplier

[@kdale415]

I needed this video, thanks so much, really helped out.

[@BigBrandoh]

thanks for watching

[@universeknowledge3346]

I m giving you whole setup @44999 if you want plz contact 9754009556

[@devondriawalker36]

I bought heat transfer vinyl but i can’t weed out the letters it’s like it’s not cutting all the way through

[@BigBrandoh]

you might have to adjust your cut settings, make sure your cutting the right side and also make sure there isnt a protective film over the vinyl. i've seen some vinyls have a clear film over the top.

[@devondriawalker36]

@@BigBrandoh ahh yes the vinyl was the wrong way thank u and do u know where I can buy tshirts in bulk?

[@zemirabragancaepereira97]

Is it okay to stick decal vinyl on a t-shirt with fabric glue?

[@BigBrandoh]

no. i wouldnt recommend doing that.

[@ProductiveStrings]

That's Why!!! Thank You!!!

[@BigBrandoh]

thanks for watchin

[@solangeleegonzalez1461]

Great Explanation video

[@neylawaterman1380]

Hi, I need help, I use my cup heat press machine and the pad is as line and the line is coming up and my cup is there a place where I could buy one to replace it. Please help

[@BigBrandoh]

hi, im sorry but i really dont understand the question. what do you need to replace? the whole press?

[@neylawaterman1380]

No just the pad

[@BigBrandoh]

depends what kind of press you have. check out heat press nation.

[@neylawaterman1380]

Ok, thanks

[@eolhprosperity2061]

What is the next 2 step are when you get a heat press??

[@TheAhmedmarco]

You're the best man! 🙌🏻👏🏻

[@BigBrandoh]

appreciate that

[@genedisvicente9394]

thanks, very useful video

[@westleytracy7770]

Where is the best places to get your t-shirts vinyl

[@tristanbrito5687]

how do you know what heat transfer or the plastisol transfers you be talking about??

[@BigBrandoh]

what do you mean? in this video im showing Heat Transfer Vinyl and Decal Vinyl

[@jubithinks9116]

Very informative Big Brandoh

[@latonyamozee7628]

Spot on information I needed to know.

[@BigBrandoh]

thanks for watching!

[@rachaelperkins.artstuff7283]

Thanks very helpful video 👍🏻

[@BigBrandoh]

thanks for watching

[@gloriasandoval1954]

Great info. Thanks

[@BigBrandoh]

i appreciate that! thanks for watching

[@michaelreolegio3022]

Is it possible to use a DTG to print on transfer paper?

[@BigBrandoh]

not sure. why not just print directly on the shirt if you got a dtg printer?

[@richiemuniz2235]

This was super helpful. Thank you! :)

[@tuweefaatea8042]

Thank you brada!

[@BigBrandoh]

Thanks for watching

[@overseerkiole6723]

You the man G

[@BigBrandoh]

💯💯💯

[@almushill2657]

Were to get heat transfer bundles

[@BigBrandoh]

check the links in my description box

[@illepiphanyapparel7231]

YOU ARE A LIFE SAVER!!!!!!!!! THANK YOU!

[@BigBrandoh]

thanks for watching

[@yunngkhalifa]

Is adhesive vinyl good for T-shirts???🤔

[@BigBrandoh]

rewatch this video

[@FVG_alex_garcia]

Thank you for the info, awesome video

[@smartmoneygoodbusiness1476]

Great video

[@Dአዲስአበባልጅ]

Thank you nice vide. Decal vinyl?

[@BigBrandoh]

what about decal vinyl?

[@georgeberes7981]

How long the HTV vinyl would last on gym clothes?

[@BigBrandoh]

if its applied correctly... forever

[@georgeberes7981]

@@BigBrandoh Thanks a lot to making this clear for me! Appreciate it brotha!

[@junemagyar9170]

Do you have a chart on the temperature to heat vinyl on material

[@BigBrandoh]

no. all htv is different and comes with its own application instructions.

[@woodprojectswithalex2692]

Thank you very much for your complete explanation about two types of vinyl which is available in the market! so, honestly, I didn't know what is the exact difference between those! it was nice to let me know. I really appreciate it.

[@BigBrandoh]

not s problem. thanks for watching

[@Dmite_The_Great_6558]

Thanks fam u taught me something

[@BigBrandoh]

thanks for watchin 👊🏾

[@jg4821]

Thanks You for video.

[@BigBrandoh]

thanks for watching

[@gregpeoples2020]

Can self adhesive vinyl work for t shirts?

[@BigBrandoh]

no thats like decal vinyl. you need vinyl thats made for the material you are going to apply it on. if you plan on putting vinyl on cotton shirts you gotta buy vinyl made for cotton shirts

[@gregpeoples2020]

Ok thanks appreciate that. Also I'm just starting in the t shirts business what is the best software to have I have a US Cutter machine?

[@BigBrandoh]

photoshop and illustrator is what i use. i cant speak on any other software cuz i havent used any other ones. whatever software you choose, there are tons of videos on youtube on how to use it.

[@dapittg]

Does it matter if it says iron on

[@BigBrandoh]

if it says "iron on" than you have to apply it with heat.

[@junemagyar9170]

How long is the shelf life of vinyl

[@BigBrandoh]

not sureZ ive pressed htv that was 2 years old and it still laid down with no issues. and also cut decal vinyl that was a little over 2 years old. no issues. but it all depends on the condition of where its being stored. humidity and stuff like that can mess with its shelf life

[@sabirdebabsia2260]

Hallo from Germany ;) can any one tell me all the names of machins and papers in amazon thank you

[@BigBrandoh]

HPN Press, Cameo Cutter, HTV

[@sabirdebabsia2260]

Big Brandoh thnx bro

[@ryankheng1332]

Whats the biggest tip heat pressing on windbreakers?

[@BigBrandoh]

biggest tips... know the material the windbreaker is made of, buy the correct transfers for that material, use a laser thermometer to check your heat. so you dont melt your jacket