its the limitor t160 in the home depot ceiling fans from Hunter.
@erikahale14847 жыл бұрын
thank you so much! wow! worked like a charm!
@gmartelamon7 жыл бұрын
Thank you!
@brandongillespie33557 жыл бұрын
Everyone can thank our government for this Problem, The DOE (Department Of Energy) had a law passed to have these (power limiters) put on all ceiling fans, Hunter, Harbor Breeze etc, it is a grand scheme to lowery energy usage .Mine went out after about two years of service. With a little head scratching and research i figured it out. Great video, thanks for the help
@JamesJohnson-sh6jn7 жыл бұрын
Almost two years later and you saved me a hundred bucks. Thank you for the video!!!
@monsoonrevolution7 жыл бұрын
James Johnson you are welcome
@chaos2organized6525 жыл бұрын
This was SO HELPFUL! My husband was going crazy trying to figure out why the fan would turn on but not the lights. He couldn't believe there could be any problems with a new Hunter ceiling fan!!! He spent a lot of time checking the wiring and wall switches before he watched this video. God Bless You for going out of your way to help other people fix this problem!
@joeysanchez79588 жыл бұрын
Hey man, thanks so much. Same exact model, I actually pulled up this video as my old man drove us to Home Depot, I even had the light fixture in my lap. We literally broke out in a fit of incredulous laughter in the parking lot as we pulled it out, and saw carbonated soot on the wires. Works just fine, saved money, keep up the good work, brother.
@monsoonrevolution8 жыл бұрын
glad i could help.
@noobkase6665 жыл бұрын
3 yrs later and ur video still helping ppl. Good stuff man tnx.
@mikeythepig31345 жыл бұрын
This fix worked perfectly. I had already replaced one light fixture, but ran across this video before I replaced the other two Hunter units that were doing the same thing. It literally took me 10 minutes to fix both of them. Thank you!!
@SailingFreeStyle5 жыл бұрын
dude for years this has been bugging me with both the units we have! I never found a "fuse" when I originally tried fixing it so i gave up. idk why I had the ambition to rip them apart again today but before I started cutting wires I figured I would search youtube to see if anyone else had the same thing going on and already figured it out, and sure as shit you did! Thanks man!
@philiplenowitz16475 жыл бұрын
Thanks for posting this. I have taken the light kit down and had no idea where to start after new bulbs, testing the light switch. You saved me from some very intemperate language and a trip to Home Depot for a new fan. Nice work!
@coopert687 жыл бұрын
Hey Mayhem. Thanks for the video. Bought a Hi end Hunter a little over a year ago and bulbs blew out and it never came back on. Glad I found your video and you saved me a lot of money and headaches. Not to mention time. Rock on brother.
@danielh57768 жыл бұрын
Thank you so much!! Had the exact same issue and exact same solution. Would have never been able to solve this without your video. Called Hunter customer service and naturally they were no help so thank you!!
@travisricks34362 жыл бұрын
Thank You for this video!! My fan has been broke for years and I decided to fix it tonight!! This was the problem!!! Some people call it a “thermal switch.” Idk, but it’s eliminated now and I got lights!! THANKS AGAIN!!
@jacobnelson2117 жыл бұрын
This video saved me a lot of time, frustration and money. This was my exact problem. Thank you for taking the time to share with others!
@frankmcnulty91217 жыл бұрын
Thanks for the fix, we've been in the dark for a couple of weeks. Replaced the wall switch, the toggle and the bulbs only to find your fix worked immed. Thanks for taking the time to put this on youtube - Good Karma to you.
@raiderdad134 жыл бұрын
Hi what if the fan light kit does not have that little white wattage limiter ?.
@Andrew-go5cm4 жыл бұрын
I had this EXACT same problem. This video is the only thing I could find anywhere that was helpful. I bought a hunter fan brand new one week ago. I removed that small piece like you explained and viola now we have light! Also - Hunter included lights that DO NOT fit the sockets. Wish I had a bought a different brand.
@briandeem70057 жыл бұрын
Absolutely awesome help! I was pulling my hair out trying to figure out this light. I almost scrapped the whole thing. Thanks man....love the real life going on in the background....just like my house
@monsoonrevolution7 жыл бұрын
no problem!
@keciad406 жыл бұрын
Thank you so much for making this video. Two and half years later I was able to fix my light. I loved the fan so I did without the light for about a year. Once I followed the steps in the video. I now have LIGHTS!!! YAY!!!
@monsoonrevolution2 жыл бұрын
Just remember that is only what I did. Not what you should do. If you opt to do it, that's on you. I am not an electrician.
@wamo626 жыл бұрын
Thank you so much for this video! I was just installing two brand new$269 Hunter Great Room fans and could not figure out why the light wouldn't work. I had resolved to calling our electrician back (newly built house) but thought I would check KZbin first. I am sure glad I did! Thanks again.
@reedmartz89245 жыл бұрын
This video was very helpful. Thank you. All the other sources I consulted said to replace the pull switch but I tested it with a continuity tester and knew it was good. Had it not been for your video I would not have discovered the limitor was the problem.
@michaeljohnthomasionson46966 жыл бұрын
Many , many thanks! I went through so much effort: checking wiring circuits, swapping light kits - Hunter customer service was of no help. I was ready to replace the fans (two with the same problem on a 3-way switch). You saved the day!
@KatFisch9997 жыл бұрын
Wow! Dude! I wish I had found your video BEFORE I went ahead and messed up my ceiling fan! When the light went out with a bright "flash" when I tried turning it on, I assumed it was the light switch that burned out. So I replaced the switch but no avail. Further circuitry testing hinted that something went bad inside the motor housing but I didn't want to poke around further. Meanwhile, by replacing the light switch, I could no longer put the glass bowl back up, so I went ahead and ordered a new one. LESSON LEARNED!! Since the new one is also Hunter, I'll know what to do the next time it conks out on me! MANY THANKS FOR POSTING!
@maryfastashburn6 жыл бұрын
Thanks! You saved the day today... I thought I narrowed the issue down to the switch housing assembly, but couldn't order one from Hunter since they're obsolete. So, I searched the web for other options and found your video. I bypassed the limitor and have light again! I'm using LED lights, so hopefully temperature is not going to become an issue, but will look into getting a new limiter in the future.
@Suncast45 Жыл бұрын
It was a simple fix for sure! I did mine this week, Hint! replace your old hot incandescent bulbs with cooler LED bulbs. And take the light fixture off by unplugging unit! Much easier
@laurengeorge33786 жыл бұрын
You’re the BEST!!! I bought a new light kit and replaced the light switch...neither worked. Thank you so much!
@romeomike89185 жыл бұрын
Worked great for me. Changed out a perfectly good pull chain light switch and still no lights before finding this video = problem solved. Thanks again.
@michaeldoroba94426 жыл бұрын
Why didnt i see this a few hours ago. Just went out and bought a new freaking fan from Lowes! Boy am I glad I just looked at the limiter as you had and cut it the eef out, wired nutted them up and bingo, light working. Thaks a million.... Now I can get back my $160.00 bucks! Oh BTW we all know you love Captain America. No worries I like the movies too.
@louishaynie25348 жыл бұрын
I have a different, no name fan, similar silly switch. That thing has been driving me nuts every time I have tried to figure it out. Thank you!
@monsoonrevolution8 жыл бұрын
no problem. be safe. enjoy your light.
@AssPain-uh8vp2 ай бұрын
Love the kids doing their thing. Jumping on the bed baby crying. Something fell. Dad doesn't sweat the small stuff
@kriscox17645 жыл бұрын
Thank you! This was the issue with my fan/light, and with your diagnosis I had quickly bypassed the burnt out limiter. Now the light are LED and maybe pull a total of 22 watts, so the limiter is unnecessary anyways.
@ZyferWarriorPrime5 жыл бұрын
Man that is a lot. Mine pull 4.5 watts each.
@preachermand53803 жыл бұрын
I am so glad I searched this. I just installed a Hunter fan and I have power going to the sockets, but the lights won't come on. However, before I put it all together, I checked with my voltage meter and my main wires had power but the little wires did not. I was puzzled, but I kept on treading. Now I know. Thanks!!
@AerialLensVideo7 жыл бұрын
Thank you! Saved us a bundle. By the way, while in there, I replaced the curs-ed halogen bulb component with an 11 Watt (but still VERY bright) dimmable LED and mini base for about $12; we will not miss the heat and arc-welder-level power consumption (well almost) of halogen.
@wc27315 ай бұрын
2024 and you still helping folks, thank you for your video!
@jazzandbluesculturalherita25477 жыл бұрын
The failure of this Limitor device was the fault in my fan light kit, also. I just unscrewed the wire nuts attached to each lead of the Limitor device (my leads were pink and white), and removed it from the circuit. Just like here, I joined together the black leads that were originally attached to the Limitor wattage or current limiting device, using one of the leftover wire nuts. Result: my light kit is working again! The Limitor device failed due to shorting of the light bulb circuit when I was attempting to change a bulb that was stuck in socket and ended up being twisted off. Poof! Thanks so much for this very helpful video tip.
@tatertx6 жыл бұрын
Man after 2 years of the light not working it now works thanks to this video.
@MrEldeanyo Жыл бұрын
thanks man, this worked on my 52106 hunter builder indoor ceiling fan.didnt think i had one, then you pointed out the little label, they had it tucked away hidden. chatted with Hunter for help, they just wanted me to buy more crappy parts.
@hpeteacher94456 жыл бұрын
Too funny! I hooked up the same ceiling fan up 2 weeks ago. I did not attach the light assembly, just the fan. I disconnected the 2 wires to the light assembly and installed the fan. A friend told me to attach the light assembly, since it would look better. I did just now. I hooked up the 2 wires I disconnected. The fan worked, but not the lights. I switched the wires and the same thing. I took the light assembly down and it was wired wrong. I connected the thin white to the thin pink, the thick white to the thick white and the black to blue. Everything is working just fine now. Then I came across your video and laughed. It must have been a friday afternoon when our fans were wired.
@richardview12817 жыл бұрын
Thanks man. You just saved me from buying a new lamp unit for my Hunter fan. Nothing looked charred and I would not have thought to even check that little device. Mine did have different markings on it, but looked the same. I just unplugged it from the snap connectors and the other 2 ends just snapped together...not that anyone should actually do that.
@lebo88776 жыл бұрын
you tube is my go to for almost any answer, theres always somebody that has the issue that im dealing with. your my hero of the day. thanks so much, fixed in no time
@monsoonrevolution6 жыл бұрын
Lee Boshears you are welcome my friend
@Kado_Tornado6 жыл бұрын
Great video! This was my issue. I measured the impedance of the T160 after removing it, and got about 500k Ohms. High but not infinity. I expected if it was the culprit it would be an open circuit, so FYI to others.
@ZyferWarriorPrime5 жыл бұрын
Thanks for this. This thing went and blew two bulbs in the process. Fortunately they were the old Incandescents it came with. Mine was the easier version you menioned in the video. It was hard to find, have to follow the pink wire. It was hidden pretty well. There was no identifiable markings on it. Wish I would give a 1000 likes. What is with all the downvotes? I mean this video was really helpful. One suggestion I would have is to detach the power connector on it so you can more easily work on it in a well lit area. Seemed pretty uncomfortable doing it like that.
@ucanreid7 жыл бұрын
This is why the internet is flipping awesome. I replaced the pull switch, nothing...was getting ready to order a whole new light kit and then BAM!...I find this gem. Thanks for posting your video...I feel like a master electrician
@stevesmirl3586 жыл бұрын
OMG... never would've figured that out...awesome! I knew it was some kind of capacitor or something up in the housing. I multi-metered everything below and thanks to you, only blew $5 at Home Depot on what I thought originally was a bad/stuck (WD40) switch...Felt compelled to use the new one anyway...Not sure what that protects from a heat prospective, but I switched from incandescent crappy bulbs to LED's that use virtually no wattage/amps and give off no heat...
@monsoonrevolution6 жыл бұрын
steve smirl glad it helpef
@ruthburridge26614 жыл бұрын
THANK YOU!! Like so many others, this has been driving us CRAZY!!!! Your fix worked perfectly, and was well-explained. Thank you!!!
@goblazers787492 жыл бұрын
Thank you! Your video is one of many which mention the same fix, but that made me feel confident this was the right answer before I started taking things apart.
@bama08287 жыл бұрын
Thanks so much, took mine out and light works again. First I went to Lowe's, where I bought the fan, to see if they sell that part and they don't. Thanks again for showing us the problem.
@careywebb64697 жыл бұрын
That was the problem. Thanks so much for the video. I don't normally comment, but it was very helpful and helped saved a good bit of money. I found the replacement part on EBay for $6.75, so I'm going to go ahead and replace it to be on the safe side.
@JeffreyWillis8006 жыл бұрын
can you post a link to the replacement part, and did it work?
@brentpopadych5 жыл бұрын
Mayhem. Thank you. Fixed the light within a couple minutes. Couldn't find anything online and glad you said it s not replaceable cause I would have kept looking. Thanks again.
@monsoonrevolution5 жыл бұрын
I was corrected and found you can replace it and have pinned the link for the replacments in comments
@gilbertlennoxgilbert2772 Жыл бұрын
Looks great, and with a brighter bulb installed that’s all the light you need. kzbin.infoUgkxWF88GpljEn-0o34vtLFazEQ5h5Q33SjU As far as ease of installation- this was my first ceiling fan and it took about 3 hours because I had no idea what I was doing and also it’s helpful to have a second set of hands and a magnetic drill bit. Works great.
@dnycrane7 жыл бұрын
Thanks Bud, just fixed mine using your expert tip. I"m an electrician and have no idea why they out that in there nor why they would need to, other than the obvious .... sell more light kits.
@romrom9206 жыл бұрын
It's so you can limit the energy and prevent a fire hazard.
@jenniferawwad85124 жыл бұрын
THANK YOU THANK YOU!!!! This solved my problem immediately. This fan has been driving me crazy!
@michaeldrhoades7 жыл бұрын
Thanks for the video, mine did the same thing, and I was looking for the one that was in the older fans, didn't even see it hidden in the wire bundle. Just an FYI, you can unplug the harness, and work on the wiring on a bench ;-)
@jbetz784 ай бұрын
OMG! THANK YOU THANK YOU! Removed that energy limiter and wired them together and PRESTO! Works perfectly now!
@NRH19876 жыл бұрын
Wow .. it worked. At first I wanted to dislike you video because of the poor quality and the baby screaming in the background. But now that I disconnected the resistor and attached the two wire. Boom ! I have light now. That deserves a big thumbs up. Thank you for posting this video.
@masonmccord4649 ай бұрын
Thanks for the video man!!! Solved my problem with hunter fan! I replaced my pull-switch first to no avail, then I found your video and pulled the little doohickey out
@luisvelasco89315 жыл бұрын
Great family and thanks for the instructional video! You've helped hundreds of people with this info!
@queeniebird93382 жыл бұрын
I called Hunter because of this problem on a 2 month old fan. They said they would send me a replacement capacitor. So I suggest if the fan is not old, you try contacting HUNTER for the part.
@monsoonrevolution2 жыл бұрын
Its good that they finally listened. Back when this was filmed they only sent out the light housing because they didnt know why it was doing it. Good to see they listened now if they would just solve the issue.
@rone8017 жыл бұрын
thanks! worked like a charm, and fixed it in about 10 minutes! If I can find a replacement for that safety switch, I will buy one and put it back in.. who knows, that safety switch was just doing its job, and may have prevented a fire. So if I can, I will replace it. Thanks for the tip!
@monsoonrevolution7 жыл бұрын
yeah you never know then again look at all the comments. If hunter has this many fire issues with their products i think there is a greater issue. Like I said I am not an electrician and recommend everyone commenting buy a new fan. I didn't but everyone watching should.
@lcfree895 жыл бұрын
Thank you thank you thank you!!! This exactly fixed my problem. I would have never figured this would on my own. Replacing the thermal limiter is simple and cheap. This fix worked on my Hunter Type 2 Model ceiling fan.
@colliscrosby77278 жыл бұрын
This worked great, thanks a lot! You just saved me $140 from buying a new similiar ceiling fan.
@monsoonrevolution8 жыл бұрын
Sweet! just watch out for the wattage of light bulb you use.
@janellecharles53336 жыл бұрын
Good night. Your video helped me today. I took off my breaker and was my own technician and took out that thing that cause problems. Thank you very much
@pathutchings54033 жыл бұрын
Thanks dude! I was ripping my hair out thinking I was going to have to replace the fan.
@DaWahine796 жыл бұрын
Cool! Hubby and I had the same issue with our ceiling fan. Thanks for making this video! We'll try this method before we trash that thing. Thanks!!
@TomTom97735 жыл бұрын
Thank you for posting this. Mine actually had a quick connect on it so I simply unhooked it and reconnected the circuit taking the protector out of the line. Easy peazy. I never place over-sized wattage bulbs in my light fixtures so I'm not too concerned with replacing the protector although I probably should replace it.
@dpragain5 жыл бұрын
Had the same problem after a bulb shorted out. Thanks for the video!!!
@MrSkevich6 жыл бұрын
Fathering done right. Kudos to you for showing your son how to do this.
@historyfrk8 жыл бұрын
OMG OMG THANK YOU SOOOOOO FREAKING MUCH we had a light go out and we got two different new light kits that didn't work but your video solved the problem I can't believe it we had been months without a light your awesome and I finally have light thank you!!!!!!!!
@monsoonrevolution8 жыл бұрын
i know . the first time we had the problem we actually called them and made them send us a light kit. they don't even know its the problem. We went without light for days. Then i just decided to break into one and see what was up. like i said we have had 5 of these go out. Glad I could help.
@IWTFBKMT5 жыл бұрын
Good video, HUNTER screwed up on adding this device as it causes trouble from coast to coast. Like you stated, and I agree, simply unplug the two pink wires where they connect, and take this little thermal device out of circuit. Plug the Black and blue wires together, reassemble and you will have light.
@ezratheprofessor5 жыл бұрын
Perfect fix! Thank you! Mine had two pink wires that were quick connected to black and blue. I snipped the two pink and wire-nutted them together. Voila!
@bobbymcdougale70055 жыл бұрын
Thanks for the info on a newer version of these fans. I did what you suggested and it worked. I did however run into a snag. Did the pink wires as you stated, but didn't realize I had to plug the black and blue with quick connects together. Thanks so much
@ezratheprofessor5 жыл бұрын
Glad I could help.
@sturge756 жыл бұрын
Thanks for the video. Saved me from having to replace the whole fan.
@jake_steffen7 жыл бұрын
This video still holds up. Thank you!!!
@deankay44342 жыл бұрын
Positive temperature coefficient thermistor. It limits the current going to the bulbs by dropping resistance as they get hotter. It works like you girl friend, the hotter she gets, the lower her resistance is! Easy way to remember. They make NTC thermistors also. They work opposite. No fun there!
@MiamiWebDesign5 жыл бұрын
Thanks for this vid! Gonna be removing that little white limitor from my fan today and just bypassing it without replacing it.
@teriserres30065 жыл бұрын
Thank you! This worked!! You saved us a lot of headaches.
@shermansmith94366 жыл бұрын
Awesome!!!!!!!! problem solved with only $5 light switch; if I would have discovered video sooner, would have lost no money! Thanks!
@joker772006 жыл бұрын
Thanks for taking the time to make the video. Super helpful!
@xephorce5 жыл бұрын
I work for one of the big name stores. I won't name names but I had a couple come in today talking about having to buy a new fan because their light quit working. I told them to bring the light assembly in and I could check something on it maybe save them from spending money on a new fan. I was ready for this issue. as soon as I saw that thing in the light, I knew it was the issue. tested it on my meter and sure enough, it was bad. but what really really got me worried was the wires the company used for this light. everything seemed normal but the limiter as he is calling it in the video was wired up with 20 maybe 18 gauge wire way smaller than all the other wire inside. It seemed very undersized for 110ac
@laylaligutom98035 жыл бұрын
could not figure out if that was my kid crying upstairs while watching this.... LOL
@chowtimeincharlottewbeaufe68745 жыл бұрын
Fantastic! Great Fix! Works like a charm now! Just hoping it's a safe fix!
@mhonsy723 жыл бұрын
Thank you very much sir! You've save me from buying a new fan. Thanks 😊
@craigcunnington33407 жыл бұрын
Great advice! Thanks! (P.S. It's easier to work with the wiring in the light part if you disconnect it at the connector and work sitting down somewhere... just saying :-) )
@Doc-zg3xm6 жыл бұрын
I just installed d a new hunter, looks like the same one you have in the video. had same issue right out of the box. before I saw the video, It was a simple disconnect the quick connectors, and clip the blue from harness to to the black feeding the light switch, can Wamo! everything work as it should. good video, thanks.
@soothingsounds1097 жыл бұрын
we've been trying to figure out the issue... thanks so much it works perfectly now!!
@DawnClovis7 жыл бұрын
Thanks so much for your advice. I admire how calm you are while filming that and having your little boy helping. :) (I could learn from that too! lol!)
@khayman015 жыл бұрын
Awesome video saved me from buying a new fan or light fixture!
@debbieheinisch17247 жыл бұрын
Thank you. We followed your directions and the light works beautifully.
@monsoonrevolution7 жыл бұрын
I am so glad We could help.
@4JillsDogs6 жыл бұрын
dude, that's brilliant... if you are ever in buffalo, ask for dino, i owe you a beer (or x6)
@kathybennett55745 жыл бұрын
Wow, thank you for the amazing instructional! I was able to get my lights working in less than 5 minutes!
@jimthomas8666 жыл бұрын
Just took it out and it works fine now. Thanks MoN.
@draper8587 жыл бұрын
thank you so much! I have 200 of these fans, and it's a constant issue. I will now no what to do. ;)
@monsoonrevolution7 жыл бұрын
what? 200? Why?
@ajetz28837 жыл бұрын
Probably owns a hotel
@monsoonrevolution7 жыл бұрын
yeah he wrote that he owns apartments.
@brynmrsh3 жыл бұрын
A better quick fix is to stop buying garbage from Home Depot. Even if you think it's not garbage, it's probably been returned because it was not working and the idiots at HD just put it back on the shelf for you to buy. Can't say how many lights I bought that were missing parts or didn't function and had clearly been returned and I had to go back to the store and get another, only to find out it had been returned as well and was missing parts... After going back to engineering school and no longer installing garbage lights that were purchased at Home Depot, I haven't had a single problem. Until I stay at someone's house who has one of these.
@borfishing76908 жыл бұрын
I'm going over to a friends house to check this out. Hope it works for us. Thanks for sharing this great information.
@monsoonrevolution8 жыл бұрын
let me know how it works for you
@zlonewolf16 жыл бұрын
This works! You saved me a bunch of money! Thank-you.
@hadleyhayes75695 жыл бұрын
Hi. This "fix" worked perfectly for our 3 year old fan. Thanks.
@MisterArdor7 жыл бұрын
That was the problem for us, you nailed it! Thanks!
@arunkulkarni32536 жыл бұрын
Thank you. I hate this planned obsolescence by companies
@guillermomontero75627 жыл бұрын
Great video! Dead on ... the stinking "limitor" was the culprit as you mentioned in your video. Before this I had already taken apart the wall switch, fan switch and couldn't find the problem until I saw your video. This is s must video for all those handymen out there. Thanks for sharing!
@isaaclytle46683 жыл бұрын
Thank you so much. Me and my son did this in close to 2 minutes
@Tadster4727 жыл бұрын
Thanks for the light fix. Worked for me. Thanks for taking the time.
@13gradias4 жыл бұрын
OMG. Man. Thank you so much for this video. It was driving me nuts. Simple fix
@terryhronek3 жыл бұрын
Looks fantastic, how long is it? I am surprised that even new, there are problems. I was watching a video with a guy that bought a 2 year old Prevost with 6000 miles and he put $15,000 into it the first 6 months. The interviewer said it was common to spend money on even new units in the first year. I was surprised that within 2 years, lots of parts are no longer available. Have fun and follow the sun. Love your videos