Why you need the Magnuson 2650 for the LT & LT4

[@Godsblessings1111]

I put the Magnuson 2650 on my 2013 ZL1 Camaro and the dyno numbers came in at 958 whp and 846 ft lbs of torque with 16 lbs boost at 7000.rpm. Great content! ✌

[@anthonydimaiuta4225]

Can I put that on a 2014 Camaro SS 6.2

[@MrChucktown09]

What other supporting mods?

[@michaelaguirre403]

@@MrChucktown09 I added a BTR stage 3 cam, ported heads, 9.5 lower pulley, 5" big gulp, Monster S triple disk clutch, added cooling system, MM catch can 2" headers 3" cat back with Corsa exhaust. Running NITTO RRR drag radials. I have my stock supercharger for sale if you know anyone who is looking for one? ✌️

[@MrChucktown09]

@Michael's_ZL1 very nice! How do the RRRs hold up? I'm in the same boat as you will be trying to sell my 1.7 stock blower. And have NT555RII otw

[@michaelaguirre403]

@@anthonydimaiuta4225 Yes!

[@ttcookn8246]

For a good starter package- I got the 850 hp package that runs 93 or E85. The car runs really great. I’ve had the car back for 6 mos and NO ISSUES. I ordered some 345 triple 8,s. Hopefully that will keep the power to the ground. Your best bet is to talk to Steven.

[@Faris-pu8dq]

how long was your car in the shop for?

[@CamaroThings]

*Supporting Mods* is the most underrated part of this whole video.

[@gearheadflicks]

yeah, and that can be a can go into many directions. We will create a general video for the average guy.

[@CamaroThings]

@@gearheadflicks for sure. So many people just want to put a 2650, F1-A, or Twin Turbos on their car and make 1,XXXwhp but all the parts to make it do it reliably get slept on far to often.

[@jeffreygray6575]

Awesome! Great info, you guys are leading from the front! Go LMR!

[@toms2872]

I enjoy your videos. I just got my first ZL1 Camaro, I'm learning a lot from the information you put out.

[@LateModelRacecraft]

Glad to hear it! Give us a call if you have questions.

[@Ray956Texas]

Hes absolutely right on point with all the numbers

[@oldschool6268]

Whole new level of respect for you ! I have been considering 2650 magnuson or edlerblock since it has the set up for port injection, but I hear you haft to port the edlerblock to get magnuson level performance. The magnuson has a louder wine pitch sound, and is the best selection out of the box. Magnuson and a stage 3 or 4 cam on my ZL1/1LE 6 speed would be the perfect set up, 200 hp upgrade I'm sure.

[@stevenPounder-p4b]

The magnuson has better intercooler bricks vs the edelbrock. The edelbrock just isn’t optimized for flow or cooling, whatever the platform.

[@staceymcgrady5968]

I tried the the EB couldn’t get much boost. I have since installed the Mag should hit the Dyno early next week.

[@oldschool6268]

​@@staceymcgrady5968Any updates?

[@tcox_21]

Just bought one for my 2018 ZL1

[@seanwisdom299]

I’ve got a jacked up Silverado and I’d like to have LMR be part of my conversations when I explain that this truck is a 1000hp. TSP 427, Tim King 8 speed, triple disc Circle D, Whipple 2.9. I say let’s make it happen! Calling you tomorrow

[@y2000air]

What about the 3100?

[@danielfernandez3938]

What about the Magnusom Vs the Pro Charger ? They prefer the Magnusom but I have seen a lot of Procharger cars

[@bobsmoot8454]

Actually running a large volume supercharger allows you to drop the rotor speed significantly and achieve the same boost as from a smaller unit, plus as he said the air temperature is lower because of the lower speeds of the rotors. If I were modifying my car I’d go with the 2650 and headers and significant uprated aluminum radiator/oil cooler/big intercooler. Then add a cam/valve train and upgraded fuel system. These 2650s are awesome. I’m inclined to give these guys a call on my V.

[@readyon3506]

Why 2650 Maggy and not the 2.9 Whipple ?

[@davidedwards89]

thank you very well explained.see you soon with my zl1

[@pali1H]

Was thinking of getting one but my LT1 has 110k miles lol. Should probably spend the money cracking open the motor for a refresh / upgrade. Worried this would kill it even at low boost.

[@nyakio5511]

Always better to be safe then sorry.

[@rickybobby4017]

Yeah your right. Stock lt can only handle bout 8-10 psi in stock form . Better safe than sorry 🤙🤙🤙

[@roberts3930]

One good thing about well used motors is they are looser so handle the increased heat better. Down side is, how fatigued are your bolts. Boost it, and see how long she goes. You never know, it could be fine. What I do know is destroying a fresh engine especially if its over something stupid fing blows.

[@pali1H]

@@roberts3930 nice! thanks for the info!

[@MonicaHolly143]

Let ur lt1 die stock and just get a new one

[@patrickciarcia4100]

Just love all the packages you offer… will be talking with you soon on my wide body challenger… 😎

[@Mr.-Sir]

Wow! Is replacing driveshafts part of the supporting mods? I just imagine that thing twisting off with that kind of power being put down.

[@josephfamularo469]

Great video Steven. Love the content, keep it up.

[@306TurboFox]

Thanks for this video It was a huge help! It would be awesome to see another info video like this for fuel systems needed for these cars with the direct injection. I'm still a little confused on what is actually needed to make 800+ WHP with a direct injected motor.

[@russthomasjr]

This the video I’ve been waiting for

[@santosmartinez711]

Thank you for the great information!

[@Goczku]

Do we need Katech di fuel pump system or Port Injection Fuel System for that supercharger for avoid fuel starvation issues which directly lead to blown rings and melted pistons aka catastrophic failures ?

[@SebastianGonzalez-n7e]

Could this bolt straight onto a stock 2023 Camaro SS 1LE with the 10speed? I’m looking for a little supercharger whine (like a stock Zl1) Mabe adding just a cold air to hear the whine a little more.

[@timothyberlinski2299]

Put that on an L87 for about a conservative 650rwhp aould ypu need lt4 pump and injectors?

[@ibmapple770]

Need this for the C8!

[@southdetroitentertainment7741]

Just wait till the R3100 comes out Man, the horse power that the new Eaton Supercharger is going to make is going to be INSANE

[@davidciesielski8251]

Hello, do you have an idea when it "will" come out I am about to buy next week! Thank you.

[@southdetroitentertainment7741]

@@davidciesielski8251 Not sure, but i'm keeping an eye on it's release date

[@SrtHemiPower]

It’s never coming out in testing they were a failure

[@MrChucktown09]

At what RWHP point do we start getting in the grey area of unsafe for stock internals for the LT4 platform?

[@Kekzuu713]

LT4 has forged internals from factory it’ll take whatever you throw at it

[@Brittvanegas]

1000+

[@TheDamonsta]

I want around 800whp on my zl1 but I only wanna run it on pump 93 is that even doable?

[@eversaenz7775]

We need to see the c8 magnuson vs z06

[@quillanthrasher6846]

But for road racing specifically a turbine style super charger is better isn't it, it has more usable power??

[@Ndw1995]

How would this stack up against the 2.9 Whipple?

[@whatisthisevenfor27]

Do you have anything for the new Cadillac CT5 V Blackwing supercharged?

[@JerryCecco]

What is your recommendations for a 2017 c7z m7 that's both street and 25min hpde days?

[@breadn5556]

What is the 0-60 improvement on Base C7 with this unit installed.

[@cabuboyvisitacion1298]

Thank you! Makes more sense to me now! Aloha!!

[@thisisdudewhoru]

Looking at going magnuson on a Zl1 1LE with cam with bigger fuel lobe. Looking to stay on 93 as tank of e85 likely won’t last a whole 20-30 minute track sessionbut might? What kind of power could realistically shoot for without any chance of heat problems?

[@jaimegastelum-angulo1057]

Before purchasing a whipple for my 2018 Chevy Tahoe will this fit it?

[@scottzito4797]

Must you do heads and cam for the Magnuson supercharger to make sense one the LT4?

[@frankiebar]

For the C8 too? Is there a 'quiet(er)' option for less of the whine?

[@bbaz6729]

Can the transmission of a 6th Gen handle this horsepower?

[@K06E]

Will it whine like a hellcat?

[@jasonnellis3566]

Can you bolt 2650 on 2014 chevy silverado 1500 5.3L z71 lt. If so how much hp/tq are we lookn at.

[@jeffnoob8448]

This is the 4th time I've played this video next to my wife.... no acknowledgement yet 🙂

[@LEGO.SC.MOD1FIER]

😂

[@jeffnoob8448]

#5 happening now

[@mrphiscal]

@@jeffnoob8448 maybe get your girlfriend to watch it 😂

[@robloved8477]

what about just want daily driver in southern California 2020 ss with more horse power what are my street legal options

[@johnwesleyw.2110]

With some modification and fabrication, this would look awesome on top of my 3.0.

[@Chestnut1998]

Great video!

[@jasonbrittain7110]

I seen in another video somebody mentioned about this that they would not do this SC Without doing heads and Cam 1st. What do you think of that?

[@Gullyswift3]

Why don’t people go for a whipple since it’s bigger?

[@fzr1000981]

Better cooling on Maggy

[@ufcpubg1964]

Can I use this on a 5th gen ss

[@ANMIV517]

Are there cam options for the LT4 that shift the power to the top end more at the expense of some torque?

[@Desert_Rogue_Tanker]

Is this compatible with the C8?

[@tattoobillstattooremoval8822]

How does this compare to Whipple?

[@SrtHemiPower]

For hemi platform whipple outperforms them by far

[@theponycargarage1453]

Could this be used as replacement for LSA supercharger? Do you recommend something else for LS motors?

[@adamgriffin]

There is an LSA 2650

[@Godsblessings1111]

I just put the Magnuson 2650 on my 5gen ZL1 with my engine build and it hit 957.6 whp and 846.3 torgue with 16 lbs of boost at 7000 rpm.

[@LEVEL8RIDERR]

If I get a grand sport c7, you guys can get it to 700rwhp ?

[@kolbyhumbert2680]

What psi or whp do you feel comfortable with SBE LT1?

[@MichaelGreco]

Did you guys end up producing the billet lid for the 2650?

[@LateModelRacecraft]

Yes, Mr Fereday has a billet lid for these. 💪

[@MichaelGreco]

@@LateModelRacecraft nice! Do you happen to have any Dyno numbers? Is there a difference?

[@SonicH6265]

@@LateModelRacecraft will it fit under the hood of a 2017 SS Camaro and will a tune be needed after?

[@Cardiakk]

Most people build their cars but don't actually track them. For a track build, would a procharger be a better option or would you still recommend the 2650?

[@YoursInYeshua]

He says a roots style blower is better for tracking it, since it has you leaving corners faster. They're also best for around town, stop light to stop light stuff (if you have sticky tires, like nitto drag radials). He says the centrifical style blowers are for 50mph to 180mph blasts, like for half-mile straight-line races and rolling freeway races.

[@Cardiakk]

@@YoursInYeshua At the time when I posted this comment, I didn't realize how brutal the torque can be from a roots style blower. I've seen too many guys mention that it can be too much for a roadcourse. A centrifugal allows the power to come on easier for corner exit. It seems the roots blower will just haze the tires too much unless you're keeping your power at or below 750WHP.

[@YoursInYeshua]

@@Cardiakk Agreed. My boss had the C7 Z06 and even with its wider tires, he couldn't put the power down very well.

[@Cardiakk]

@NightKing114 Yeah, the Vettes are just too light in the rear. The ZR1 aero and/or 19's in the rear is needed to keep it planted. For the Camaro, 18s are best at all four corners.

[@YoursInYeshua]

@@Cardiakk Yes. And the 18s allow for the wider 305 or 315s I believe, too.

[@bobmrkus3185]

Do you still work on C 5s?

[@trinitytrucks]

What makes you prefer the magnuson vs whipple?

[@lostinawareness7979]

Magnuson has a better cooling system

[@CamaroWarrior]

@1:10 what are the "correct supporting mods" needed to make that 650-700whp? I have a 2016 camaro 2SS A8 with 89k miles and was thinking of getting this SC along with a 103mm tb/intake

[@ThickDrip]

You need fueling supporting mods if you’re not going to swap out the pistons and rods

[@aaroncoyle3252]

I wanna put this on my 95 ss

[@dennisrisner7900]

Whipple 2650 is a better way to go . I've herd bad things about a Magnuson supercharger.

[@bartnovak7380]

I have 2022 lt3 z51 corvette, can u super charge my car? Please respond

[@guysteel]

LT2 in the Vette., there is no LT3.

[@michaelpackulak2833]

So you can put this blower on the stock LT1 Camaro and get 700 hp out of it and do it safely ?

[@LateModelRacecraft]

give us a call to talk details

[@michaelpackulak2833]

@@LateModelRacecraft I would but I’m from Canada 🇨🇦 I am not in the USA 🇺🇸 ! I’m just doing some research on pro charging and super charging for my Camaro ! I am not going to do all this till my warranty is close to being done ! I have lots of warranty on it ! I do not want to lose the factory warranty on it ! The car cost to much money to lose it !

[@michaelpackulak2833]

@@LateModelRacecraft give me a phone number I’ll make the call we’ll talk about my Camaro

[@michaelpackulak2833]

@@LateModelRacecraft give me a phone number !!!! I’ll call

[@MrJacobi22]

Why this over a centri blower?

[@josephgraham4115]

Alll the boost instantly without the lag

[@jamesmckinney495]

How long does it take for you to normally respond back to emails about one of your packages?

[@gearheadflicks]

Usually the same weekday.

[@justingriffith2991]

@@gearheadflicks he

[@petepeto9335]

So.. Thats the best i cud get on my 2004 suburban 2500 6.0l... if i want "only" 700-800whp ? .. 😏

[@chesspiece81]

How would a forged rod and piston L86 with worked heads, cam, plenty of fuel system in a 2014-2018 RCSB with a 3.0 Whipple compare to a 2650?

[@chesspiece81]

Or the Armageddon TT kit or F1-A

[@joshchauvin5585]

Whipple 3.0 takes over past the LT power range. Thats why fords respond better to whipple.more rpm

[@chesspiece81]

@Josh Chauvin I have started considering a new project vehicle since I have sold all of my vehicles and I really wanted to build a Gen V LT engine platform and after driving a Gen V 3.0 Whipple on the LT1 in a Tahoe RST with a 10 speed I really wanted one in a RCSB. Granted it was a stock Whipple kit with the stock Whipple tune and boost, stock converter in the 10 speed transmission, but the Tahoe had ARH headers, Borla exhaust, suspension and Wilwood brakes. Then I started reading up on the L8T and thought pulling the L83 out of the RCSB for either a forged L86 or take the L8T and bore it to 4.125" and bump the CR, replace the rods with forged 3.860 stroke rods. Obviously work the L86 or L8T heads, replace the cam, get the modified LT4 HPFP, upgraded fuel injectors, upgrade the low pressure fuel side, with either a F1-A, 3.0 Whipple, TVS2650 or 3100 once it comes out, or like I said the Armageddon TT kit. I'd like to make 900-1100whp on E85 and meth. The Gen V motors seem to make that kind of power very easy while remaining relatively tame compared to the higher HP LS setups I've had or have been around.

[@Bmackins94]

With the right heads/cam the whipple will work great

[@chesspiece81]

@bmackins94 What could the 3.0 Whipple support on the LT platform?

[@TBagr]

Sadly, the LT4 needs a cam for almost any mods because that the only way the fuel can be increased to supply enough.

[@TBagr]

@@LMBC6Brian It’s exactly spot on as I own 2 LT4 cars. The only way to increase the fueling is to change the cam because the cam lobe is responsible for fuel pump activation.

[@Goczku]

@@TBagror by using Katech di fuel pump

[@brettls2]

Why this over the larger Whipple?

[@pali1H]

From what I heard better IATs and overall cooling

[@joshchauvin5585]

Whipple takes over past thr LT rpm range. Thats why they're better on fords. More rpm

[@brettls2]

@@joshchauvin5585 what about the ls?

[@jimpurnell7536]

I went with the Whipple, got 600 whp,stock internals,runs super cool,no heat problems,6th gen Camaro!

[@BBradford1825]

👍🏾

[@rvchipster]

Nice video, but looking on Mags direct website, it shows max power of 588 TO THE CRANK on this model..... I know you mention WITH bolt on accessories, you can achieve 650-700 TO THE WHEELS...From 588 crank to 700 wheels? Some serious add ons right there. You can tell he never responds to comments, so how do you viewers weigh in on this?

[@seanrepka5101]

I'm thinking that the mag's direct website is referring to a completely stock engine with factory fuel system exhaust system and everything which has limitations. And he usually that power packages are attainable with supporting mods such as fuel and exhaust and cam

[@yannicali]

😍

[@thelittleguy-ih8nv]

Because if you want a chance in hell keeping up with a demon your gonna need it!

[@Motleymick]

I want a Magnuson for my C8

[@jplperformance9073]

I wish I could get a tvs rotor pack for my GenV M90!! I don't have any cars that you guys have a platform for. Maybe one day. I have 2 GTP's and a Foxbody. Maybe you could get Maggy to make me a rotor pack lol. Love the videos

[@alpha2047]

If only you could hear it whine more, also i don't see an option for wet sump. As far as a wet sump eaton system I guess Edlebrock is the only option??

[@transam2002ws6]

All the boost. 😈😈

[@dougwebers310]

Thanks for the 8 minute commercial

[@MrMaverickz28]

Should I put a Maggie on my C8 vs TT? That have a kit 😂😂 … JK JK

[@Eric-vd3dh]

Ummmm, ummm, ummm, i have bad customer service skills, ummm, hold on, let me ask Sandra, ummm, if they cant ummm help you, ummm maybe somebody can, umm no guarantees, umm you'll like it though ummm. May lay off the meth 😂😂 but ummm no guarantees

[@Eric-vd3dh]

You're lying

[@SrtHemiPower]

Right them shits are weak

[@frankcastle9691]

Not for 10k dollars

[@MrDanimal77]

Is this a direct bolt on no mods ? What is the baseline with stock lt4 z06 w LT headers and intake ?

[@josephbriggs2394]

I’ll send my CT5 V tomorrow if you guys can put it on my LT4. LMk , also Dmed you guys on instagram as well as sent an email. With no reply. I will never publicly slander a company, but if you run social media much like this please have someone willing and able to respond to potential customers. Thanks, Jordan

[@gearheadflicks]

When did you send an email? I’ll help to make sure your message is received.

[@stackenali7059]

I'd refuse you as a customer if you threatened my shop or my guys with that statement.

[@wcryan]

@@stackenali7059 Yeah, that dude would be a hard pass for me

[@DBABAE]

Homie complaining about a company while trying to get them to work on his car lol