Why You're Not Sub-20 With Roux

[@cubetorials3530]

Lol it takes me 20 seconds to make my blocks

[@silverzero9524]

yeah lol. usually more lol

[@Vivotic3]

Cubetorials it takes me 20 seconds for 1 block...

[@twoshotted]

same 😭 sometimes more

[@amateurapple]

lol just practice or watch my videos on why you r not sub 40 with roux

[@jbaru1211]

Yea I just got back into cubing to pass some boredom. It takes me anywhere from 13-20secs total to make both blocks. Generally depends on the scramble. Sometimes requires more moves to complete each block and I have occasions where I have to stop and look for an edge or corner piece even though I was already trying to look ahead. Sometimes the look ahead is successful and I see the pieces but I don't think I'm building the blocks as efficiently as possible. I'm not color neutral either other than having yellow and white on right or left/orange on top

[@hj4stwisted461]

Me using Roux: Gets 32 seconds Also me using Roux: gets 14 seconds Me: *_VISIBLE CONFUSION_*

[@felipao2134]

Lol, exactly the same for me

[@derpizzaman1050]

My PB is 16, and I'm not even consistently sub 30 lol

[@alexf0101]

Very nice breakdown, and the slow solves were a treat to watch. Super useful!

[@vegito200]

I agree

[@brycekaiser9789]

Just recently switched to Roux from years of just beginner method and got my first few sub30. Kian your videos have been invaluable to me love the content and your great explanations!

[@floatttt]

i average 40s with roux after about 3 days through a switch from cfop, I am hoping this will be useful at some point!

[@floatttt]

I've literally done 400 roux solves in 3 days and dropped from 1:20 average to 40, and got my first sub 30 roux single earlier :)

[@Kian_Mansour]

That's awesome! Keep at it and you'll be sub-20 in like 2 months.

[@floatttt]

Kian Mansour i hope so, I'm not even sub 20 with cfop (4LLL) yet but a lot of the stuff i see in tutorials and walkthrough solves strikes me as obvious so I think I should make relatively quick progress up to sub 30 then get stuck or something

[@Kian_Mansour]

Good luck! I think you'll be fine.

[@floatttt]

Kian Mansour literally 2 days later i got my first sub 30 roux ao5! I still average about 35 seconds but there's definitely progress!

[@guroux]

nice, thorough video. can't wait for the sub 8 video.

[@Kian_Mansour]

Haha that video will be a lot of fun to make. I'm basically going to reveal all my hacks and secrets

[@Kian_Mansour]

For now, I have planned a sub-15 and sub-10 video. Originally, I wasn't gonna make a sub 8 video, but now I'm considering it. Should I also do sub-12?

[@igortarasow]

+PenguinsDontFly It would be strange because there are no sub8 video for cfop (as I know)

[@guroux]

good, then if anyone wants to be sub 8, they'll have to do it with roux.

[@Kian_Mansour]

Lol

[@susithrarajkumar7534]

Jesus tried solving the cube Dies on the cross

[@Kian_Mansour]

HAHAHAHA THIS IS HILARIOUS (real evidence roux is better)

[@seirence5855]

Kian Mansour loo

[@kxden3849]

Lmao.😂

[@npisci5314]

I think this is funny but not really cause its offensive.

[@npisci5314]

I dont want to explain why because I dont like talking about religion

[@KevinGer]

Eventhough i didn't need this video it was very entertaining! Very nicely explained!

[@Kian_Mansour]

Thank you! So far, people are liking it so I think I'll continue the series.

[@owen-dm2kr]

me too great video

[@calebjlee2685]

Eventually everyone's gonna be so good at cubing that sub 1 will mean sub 1 second

[@ninjajiraiya6402]

Lol, it's depressing to see him turning the cube so slowly and getting sub 20, while I get 20 seconds just to make blocks ;-;

[@AtheniCuber]

I can anticipate this being an awesome series for the years to come.

[@Kian_Mansour]

thank you so much!

[@aaronmarquez5596]

I got my first sub 20 ao5 today after about only a week of solving with roux

[@JaredLucas]

Missed opportunity for a "rouxest moves competition" joke. Awesome tutorial. Still using it!

[@AtharvGoel]

I am so damn inconsistent with roux i get times from anywhere between like 9 and 25 seconds with roux lol

[@radian1243]

EDDCuber hahahahahahahhahaha nope.

[@micahee8333]

AG Cuber I just switched to roux like 2 weeks ago and yeah, it's not too rare for me to get sub 11s, but I also get 23+ all the time

[@caemdaddy3220]

i switched to roux 3 months ago and my solves are inconsistent too. I used to get all the way up to 1 minute and all the way down to 45 seconds, but now since i’m better than i was my best is 30 seconds and my average is 44

[@Xalimeo]

I do cube just for fun. Started with Friedrich, moved to Petrus and now trieing Roux. Nice videos and well explained. Learned a lot which makes cubing fun again. PB: 9s ao5 with Fridrich and 19 with Petrus (both like 2 yrs ago)

[@achyuththouta6957]

Roux is better than all methods

[@kolbygriffin3044]

So I myself average around 38 seconds per solve, and my main issue is planning in inspection. I can spot the blocks, and how to create my first block, but when I start to solve, I end up doing my first block very differently(and less efficiently) than how I planned it in inspection. Any tips on how to fix this'd?

[@Kian_Mansour]

I think you just end up panicking. Try doing solves where you close your eyes and do the same solution you planned.

[@sigurdvickery3523]

Kolby Griffin Use unlimited inspection time to practice FB.

[@kolbygriffin3044]

thank you - after a week of doing fb with eyes closed I now average around 7 moves per FB. Now that I am learning 1 look cmll, I am starting to average around mid 20's (when i get any U, H, or Pi case) Although I am making progress, I fear that following my completion of memorizing CMLLs that I will be stuck with my SB as my slowest point.

[@jbaru1211]

I average 30-35. Inspection is really annoying and ends up confusing me. It's also probably a reason I won't get much faster. Can't envision where each piece will be, but I do spot the pieces prior to making the block so I have a general idea on where they might be

[@AnishBhethanabotla]

I just switched from begginers to roux. I averaged 38ish on begginers after I learned it last week and learned roux just today thanks to your tutorials. I average around 2 minutes after I tried 10 or so solves, looking forward to my journey to sub 20

[@howcas8744]

I used Cstimer settings so i can time every step i did in roux, than i compared to the times you recomended: 4/6/4/6 after that i opened the notepad and started to note the steps i did good in 5 solves, thats the result: FB:2/5 SB:0/5 CMLL:4/5 LSE:3/5 That result shocked me, i never considered learning SB too deep and now i know i should give it more importance. Your videos really helped me, hope to get sub-20 soon

[@jynxx1997]

How crucial is color neutrality? so far, I use red in front and yellow on top.

[@Kian_Mansour]

Colour neutrality is very important. Eventually, first block will become the most difficult step of the solve, so having multiple options to consider is highly beneficial. There will be so many scrambles where the 1 block you start on will be difficult, so being CN gives you so many more opportunities for a straightforward block. I used to do just 1 colour, but I quickly realised that doing more than that is quite important. I switched to 2 blocks, then 4 blocks, then 8 blocks. Start by learning orange front yellow top. This is the easiest to do first because you're building the same blocks, except that first block and second block are switched. Good luck!

[@aravindhkumar7381]

I'll do my first block under 5 seconds and practised to do L10P in 15 seconds but second block alone is taking 20 seconds ...( just 4 months into cubing )...need to practise inspection prior solve and bit of SB influence or look ahead . Ive never got easy scramble to do simultaneous pairing.

[@amateurapple]

Kian I average 32 sec with 2 look cmll. BTW I do FB and SB in about 15 secs... Cmll slows me so much. Is it the write time to learn 1 look? ANYWAY AMAZING BREAKDOWN AND EXPLANATION!

[@Kian_Mansour]

Yeah start 1 look CMLL

[@amateurapple]

Now I'm 25 avg of 12

[@kolbygriffin3044]

so lets say some days i average around 18 seconds but on others i am aberaging a slower 21 second avg what do

[@KrishnaManoharan1982]

When i watch touching tutorials i am good at roux, but, when i practice with time I instinctivly solve with CFOP how do I fix this

[@Kian_Mansour]

Force yourself to only solve with roux

[@caemdaddy3220]

i still need to work on this

[@ankithmahesh1182]

i had the same problem when i first watched this video, I liked your comment as well, I'm now sub-22, you're probably better now but for anyone who is having the same problem. How i resolved this was learning CMLL and doing slow solves it made me more confident to use Roux and now I dont have to use CFOP :)

[@Harmonity]

How do you receive the solves you analise? How are they sent?

[@theomnivert]

WOW your hand writing is as same as mine Very nice video . learned a lot of things Finally found someone

[@kostaskoukos3932]

I was using cfop for a year and was sub15 and I switched to roux.I got sub 30 in less than a week whereas with cfop it took me months. I am starting to see potential in this method!!

[@Pandaroc]

Hey there, just started with roux and cubing and still learning the ropes.. i am around 1:40 mins atm an doing my solves with w/y left/right. Is it better with them as u/d colors? Anyway i love your vids about roux !!! Keep up the good work BTW i have a hard time recognising the last step in roux. I often have to do some slice moves to see the last case...Are there easy recognition guides anywhere? Roux is really lacking good tutorials on the web..

[@Kian_Mansour]

I know others who do w/y on l/r, and it doesn't make a difference. Ryan Przybocki is sub 10 with (I think) blue/green on bottom. Just make sure you're x2 y neutral, so that means you should have 8 block choices. Thank you!

[@Kian_Mansour]

for the last step, i have a few videos on it, and GuRoux does too

[@pepperpepperandbayleaf3025]

Why are you not sub 20. Bro,it takes me a minute and a half just to make both blocks.

[@Ashurbanipal7446]

I average around 45 with roux. But I don't know all of the lse algorithms or the cmll algs either and I kinda just do it intuitively, so I think that my time will change when I learn them. I'll keep this video handy, thanks

[@clementguichet5726]

I'm pretty decent at CFOP averaging sub9 with a sub6 pb, im getting more and more bored by this conventional way of solving and i want to swith to roux How long do you think i could get sub 20 with roux if i switch from cfop right now ?

[@Kian_Mansour]

Less than 2 weeks

[@memyselfandtau4712]

What are you averaging with Roux now?

[@tvlogs7410]

How are you doing now?

[@RustyRayWay]

wellll roux sounds a lot easier sub 20 than cfop

[@thenateyoulove]

I would say so, it took me 2 months to get sup 30 with roux and I was doing a year of cfop before that and I was getting the times I got with beginners methoud. CFOP requires you to turn really fast cause the move count it's so high mostly cause the algs are so long.

[@namai9983]

15:15 how do you recognize colors that fast and already know what your gonna do next🤯 I think my eyes are slow🙄😂

[@Froge4291]

Practice makes perfect

[@lenardegypto727]

Hey Kian! Do I have to learn all CMLL algs to be Sub-20? I am currently sub-23 with Roux and I only know 10 CMLLS algs. But I mostly use 2-look CMLL. And by the way, can you pls tell me your algorithm to permutate corners?

[@Kian_Mansour]

CMLL isn't necessary for sub-20 but it definitely helps. All of my algorithms are available on my website which is in the description of all of my videos.

[@lenardegypto727]

Kian Mansour yep, I use your CMLL algortithms. Thanks for that! Andddd, do you use all the bolded algs or do you not use all of the bolded algs?

[@Kian_Mansour]

I mainly use the bolded algs

[@lenardegypto727]

Kian Mansour ohh thanks Kian! I hope to meet you soon! Best speedcuber of all time!

[@lenardegypto727]

Hey, btw, what would you recommend for a roux user like me? SM or Power M?

[@RichFresco]

Great info my man, just what I needed

[@ThibaudOU]

Cant wait for the sub 15 video and you know why Kian !

[@Kian_Mansour]

:) I'll start taking a look at it today

[@ThibaudOU]

+PenguinsDontFly :-)

[@Lv100_Raichu]

Insanely helpful video, thanks so much. I've been stuck at a 30-35s average for 3 months now and I've started to learn 1-look CMLL and color neutrality. Knowing that I don't need an insane TPS in order to get decent times has helped motivate me to get better.

[@Kian_Mansour]

I'm glad you found the video useful! Good luck!

[@minhcaohuu3691]

How could u solve with no stop to see the cases

[@jkksksxkekksksksksjjdjdis2208]

Well it takes me 18 seconds to build first and sec block but the problem is I use to many moves on building them any tips to lessen the move count

[@Jygge]

I've exactly the same problem now I do slow solves and try to be creative for especially FB. And I'm trying to do my FB blindfolded that helps to plan my FB in 15 seconds Inspection time so I don't need to think about FB that much after inspection. SB I'm doing slow solves and try to be creative again. I'm learning 1Look CMLL now and my average is 25-ish my LSE is great compared to my FB and SB

[@ericgapit1695]

I don't mean to rat on Jperm . Sorry J but he says that roux even though rotationless has lots or regrips. Maybe you should post finger tricks of your own and a plethora of tutorials just like mister perm lol. I'd also like to see your pdf algorithms :)

[@adityapandey1176]

Can I send my roux solve for a critique, please

[@jkksksxkekksksksksjjdjdis2208]

Kian Mansour can you add a 1 look cmll tutorial on your channel

[@rouxcaspe5318]

Visit his channel, he's got a PDF of 1 look Cmll and a video of all algs execution

[@zxrcubing5663]

I can get sub 20 if I do f2l insertions instead of block building. I can turn at about 6 - 7 tps for 2 look CMLL. My LSE needs practice. I want to switch to roux as it has more potential than cfop. Should I keep at it?

[@daliguerfali6200]

hey ! I average 23s with CFOP and I will attend my first competition on 29th of June. Should I switch to roux ? cuz I think it's interesting.

[@Kian_Mansour]

Switch if you enjoy it more

[@justinvenhurgozo3682]

atleast you practice a lot

[@sickSte]

HOW YOUR TPS in first solve IS LOWER THAN MINE AND I DO 30s

[@_carrbgamingjr]

Abstraxity roux requires less turns per second while CFOP requires more

[@Dravignor]

Probably because of look ahead & pausing. It might seem that you may have faster tps than him but that's when you're turning. When you're pausing, your tps is at 0 (Duh) but Kian's slow solving has consistent tps all throughout the solve. "It's always better to turn slowly while maintaining look ahead than having bursts of fast tps" - J Perm

[@xvenom8154]

How long did it take you to master roux

[@idkusername2981]

Man I'll probably switch to roux

[@willhuaylinos7423]

I am sub 25 with roux but i can't understand too much about EOLR, can you explain it in a specific way in a video please.

[@beaflores5008]

This video is very interesting and helpful, do you think I should go on with roux on a sub 30 avg?

[@krisw.6676]

Would you be able to provide links to the KZbin pages that you recommended? There were a couple of names in there that I couldn't figure out. Thanks.

[@Kian_Mansour]

which ones? the ones to look at for example solves?

[@Kian_Mansour]

if yes then the channels are "GuRoux", "5BLD", "Waffo", "Deedubb"

[@krisw.6676]

Thanks! (And yes). There was one that I didn't hear right - Cavin? Or something like that. Thanks for taking the time to share your knowledge and expertise. Your vids are terrific.

[@Kian_Mansour]

Kavin Tangtartharakul (that's just GuRoux's real name lol) Thank you so much!

[@krisw.6676]

Ahhhh, that explains it. LOL. Thanks!

[@tylervasseur2977]

I was struggling hard with CFOP, not knowing intuitive F2L and missing many OLL and PLL algorithms. Now I'm struggling hard with switching over to Roux. If there's any way I can get some help to improve with it, please let me know as I would really like some help.

[@AtharvGoel]

Helps a ton. Thank you for this video!

[@sigurdvickery3523]

Should I learn EOLR or one-look-CMLL first?

[@Kian_Mansour]

CMLL

[@sabrinaislamsweety6056]

I've saved the video of all your cmll algs.I've a question?COLL=CMLL?

[@Kian_Mansour]

No. CMLL is more optimal for roux because it ignores edges

[@guanghengxian9139]

Hey Kian, where can I learn 1 look cmll? I couldn't find any tutorials

[@Kian_Mansour]

My website. Link in description. I also have a video about CMLL execution showing the way to recognize and execute every alg.

[@guanghengxian9139]

@@Kian_Mansour ah thanks so much! =)

[@Zl0oj]

Currently averaging 25 under after a month of roux hopefully i get to sub 20 or 15 before the end of the year

[@joobin814]

I am at around 20 seconds with cfop. Should I just stick with cfop or should I give roux a try?

[@dwigt123]

What time should you get if you are using the roux for beginners method?

[@CarterBitz]

Do you have any videos or recommend any videos on first two blocks switching from F2L?

[@Kian_Mansour]

For that I just recommend watching example solves

[@adeep2075]

my average with roux after switching is 50 to 1 minute so i hope ill get my first sub 20 with roux soon

[@tuerda]

Not at the point where I am trying to be sub 20 yet, but I have been running into an issue that maybe could be discussed: Often I will have a situation that looks like it can be solved very efficiently and I spend time thinking about how this can be done. I spend so much time that my solve ends up being slower rather than faster, even when I do find a really efficient sequence. Is this a common problem? If so, is there a solution?

[@Kian_Mansour]

Eventually, that same sequence or case will be very familiar to you and you will be able to do it efficiently and quickly. The only solutions are to practise and maybe do some slow solves.

[@tuerda]

So if there is an efficient way that takes some thought and an obvious but inefficient way I should just accept a slower solve time and find the efficient way? This suits me :-)

[@Kian_Mansour]

Yes, take the efficient way. Eventually it will be instinctive and the efficient way will become the obvious way.

[@yurothechurro1531]

I’ve been practicing for a month and today I got a pb single of 34.197 but I average from 43 to 55 seconds

[@raphashakalaka9357]

What cube was that at 3:02 ??

[@Kian_Mansour]

Rapha Magic I don't remember. It's either a meiying or a weilong gts.

[@Kian_Mansour]

Rapha Magic yeah its definitely a GTS

[@snwbll]

21:31 I didn't know LSE was the same as CMLL.. ;)

[@communismcommunityisupport5386]

Why is this vid not sub 20

[@LuzoroMD]

Hey man, i'm really trying to get into roux (like most from Fridrich) but i am dreadfully slow. I think it's my efficiency so could you tell my how to get sub 50 if i show you a solve? Just a warning I am very slow and i'd just like a recommendation on what to do.

[@Kian_Mansour]

for now, just practise and watch example solves to get better at blockbuilding. i could critiques a solve if you upload one.

[@igortarasow]

I'm fast with cfop, I use zz, and I'm watching roux videos. I'm genius!

[@AtharvGoel]

Same

[@Kian_Mansour]

Method neutral maybe?

[@igortarasow]

+PenguinsDontFly I'm sub 15 with cfop, and I'm trying to switch to zz, I watch roux videos just because it's interesting method and your videos are good. But at some point I will learn roux at least at sub20 level.

[@Kian_Mansour]

thats cool

[@Phoenix1128_]

Neon Solves Your not genius so stop bragging about yourself. Theres a guy who solved cube with 10 methods and all were below sub 10 or sub 10. This is world is more better than you know

[@nikocayetano1805]

So far my progress is 2 minutes when i first learned it. I think right now im on the start of week 2 with a 39 second average and a 28 second pb. My tps is pretty slow like 3 tps.

[@screamingballoffeather3237]

I can sub 20 in 3 months!! This is helpful video!!!!

[@_carrbgamingjr]

Thanakorn jeez that’s insane! Keep it up

[@akuunreach]

Talks about more TPS, then does better when turning slower, and using look ahead. MC/TPS+Wasted Time, is a more accurate way to measure.

[@ezra6520]

I just started using Roux about 3 days ago and i am into sub-50 constantly and occasionally sub-40, i am learning EO and then i will go onto CMLL. Any other tips to get to low sub-30s

[@ezra6520]

I definitely need lube.

[@Kian_Mansour]

You're doing the right things so far, so keep it up and do a bunch of solves

[@ezra6520]

Kian Mansour Will do, I literally just got a PB of 31.119, I'm gonna keep working I and try to have a sub 30 by the end of today!

[@stub2233]

i actually got sub 20 with this video the few times videos arent scams

[@lucifer7458]

I reached sub 20 within a month, is that good?

[@champloo2734]

whats 1/2 look?

[@2inthemorning]

Cmll is orienting and permuting the final corners. Two look cmll uses two algorithms, one to orient the corners and one to permute them (about 9 algorithms total). One look cmll uses a single algorithm that will solve the corners all at once (about 42 algorithms total).

[@uthmanbarry9436]

Thanks this was really helpful!

[@LoaderGotDevoured]

Im sub 45 and cant improve what to do

[@reymaraquino6445]

i'm sub 35 in the beginner's method, and now i'm sub 1min in the roux method for 1week. my question is, how long it would take to be efficient sub 20 in roux method.

[@Kian_Mansour]

Reymar Aquino Depending on how much you practise on a daily basis, sub 20 can take anywhere between 2 months and a year.

[@reymaraquino6445]

do you have tips for me? :)

[@Kian_Mansour]

Reymar Aquino Solve often, stay committed, and watch lots of videos.

[@avanisood6283]

Hey Kian, I've just switched from CFOP like a few hours back and I'm averaging 29-33 right now. One big problem I face is FB. How do I improve my Fb?

[@VKCUBED]

Same I switched today too

[@LeonardoPranadyar]

very useful! thank you!

[@Twisty543]

I average 13 seconds with CFOP. I know full OLL and PLL. Should I switch to Roux?

[@Kian_Mansour]

TwistyTie Do whatever you think is better for you. I can't really make that decision for you.

[@MJB1027]

TwistyTie how did you get sub 20 and beyond?

[@15-mandeep.n.hc1iplylk7]

it will work for any scramble

[@cool9first]

My pb is 15.49 but my average is around 25 and that really sad lol

[@VITAL.FIT1]

this is amazing

[@topfive8415]

is 4 blocks enough? yellow bottom is too hard fr me

[@Kian_Mansour]

It should be alright, but 8 is much better. Try your best to make the switch.

[@topfive8415]

thx.ur replyiing to all comments!!

[@Kian_Mansour]

TOP 5 THINGS I do my best

[@topfive8415]

you are someone who have the potential to break the wr avg. control ur nerves? probably

[@Kian_Mansour]

TOP 5 THINGS I'll see what I can do. I just need more competitions.

[@justicedb-speedcuber6723]

I average 4.12 seconds for CMLL (2 look)

[@stubbscubing9002]

make a second block vid pls

[@Kian_Mansour]

I have a bunch of second block vids. Second block example solves, second block lookahead/fluidity.

[@kingphoenix6728]

I watched your tutorials but I’m only getting a minute with cfop I average about 29 seconds so yeah

[@joeyd1440]

I'm new to roux, if you're ever trying to make a more beginner video for shitters I can send a bad solve in for you to criticize.

[@lolxdomg6517]

i can't understand how can you solve both blocks in 9 secs turning that slow

[@NoahS4226]

Efficiency

[@NoahS4226]

*WHY I'M NOT SUB-20 WITH ROUX* Because I'm sub-12 with CFOP lol

[@DanielFitri]

I just succesfully through to sub-30 and it is not really bad right?..my PB is 19.90

[@ramakrishnannn8431]

21.42 My cmll

[@aditkantak3579]

lol i have all of this except the sub 20 part

[@MaplecraftHero]

Thanks man

[@tibblesss]

I’m over here only getting 1 minute solves on CFOP

[@tlfypbyqtlfypbyq4469]

This should help me out. I have been stuck on sub 20 for a long time

[@Kian_Mansour]

Tell me what you think after you've watched it.

[@tlfypbyqtlfypbyq4469]

+PenguinsDontFly you did a really nice job explaining everything and I learned that my efficiency is good but I need to start looking ahead more.

[@tlfypbyqtlfypbyq4469]

Also I should probably learn full cmll

[@Kian_Mansour]

Yes, full CMLL would definitely help

[@tlfypbyqtlfypbyq4469]

+PenguinsDontFly Do you think I should learn recognition as I go along or learn all the algs and then learn recognition

[@dipalichatterjee2521]

Please tell that how can I improve my inspection and block building Please tell

[@Kian_Mansour]

Practice with untimed inspection and try planning as much as you can

[@mohdnasri8926]

Seriously, I cant get it.. I dont know how to make 2x3 BLOCKS 😢

[@achyuththouta6957]

He did a tutorial video and he's the fastest Roux solver in the world

[@achyuththouta6957]

2*3*1 blocks is not that difficult however the real challenge lies in last step LSE

[@PraetorianCuber]

20:31 the second to last U should be a U'

[@Kian_Mansour]

thanks, fixed it with an annotation

[@PraetorianCuber]

+PenguinsDontFly I really hate that COLL also as a CFOP user I tried that alg you use but sadly it doesn't preserve EO :/

[@aaronmarquez5596]

im attempting to switch to roux ( i commented about my big cube and oh problem earlier) and i did a few solves to see my efficiency and what i should improve at, i averaged 12 moves for FB 20 for SB 20 for 2 look cmll( i know a few coll) and 18 for LSE. i also did a phased ao5 and i averaged mid 3 for Fb low 8 for Sb low 3 for cmll and 7 for LSE, i feel like my lookahead is ok but i have a hard time tracking the 1 edge for second block during Fb and have a fairly large pause in between,i know my effiency is bad and for Lse i have a REALLY hard time on 4c, because i cant recognize the 3 cycle and end up having to do 2 3 cycles so i just solve Df and DB instead of LR eges and then do epll on top. i know i need improvement but where should i start?

[@ChrisChoi123]

wut?

[@dipendrakarmakar4729]

I AM SUB 50.DO YOU HAVE ANY ALGORITHM FOR BLOCK BUILDING