Why Your Car Brakes Are Making Noise - Squeaking Screeching Scraping Grinding Brake Noise

[@christinasalinas9421]

I am not mechanically inclined and I always looked to my older brother for help when it came to advice about cars and now I can no longer do that. My brother passed away August 10 of 2021. I came across your video and watched it so that way I can teach myself how to do small fixes. I'll have to watch several time's to grasp the concept of putting everything back where it needs to be. Wish me luck in getting my breaks fixed.

[@BudgetMechanicHawaii]

You can do it! Easy!

[@KyTaundry]

Good luck to you, you older bro will be helping you along the way! You got this.

[@moderngod1]

Hey hope it went well! Also hope you’re able to seek guidance when it comes to handling greef it’s a hard thing to adjust to life with. Have a kick ass day!

[@juicyd9233]

Blessings man, hope you doing great now❤

[@bfitnessjoe]

@@KyTaundry you mean sister. She is a woman.

[@ghekogrrl]

I learned more about brakes in this 8:45 video than I have in the past 40+ years. Thank you.

[@BudgetMechanicHawaii]

Glad I could help!

[@dannyzamudio1252]

@@BudgetMechanicHawaii why is it when i realease the brake pedal, the breaks make a sound?

[@BudgetMechanicHawaii]

Not sure! Get in there and take a look!

[@konj106]

@@BudgetMechanicHawaii Hello, i have a question and i think you know the answer. :) About that grinding audio sample from video... Few days ago i was stuck in a mud. I was trying to get out and the car was all in mud. Everywhere.. Brakes, callipers, discs, springs, shocks... I washed it 10 hours later and everything was ok. Next day i started the car and when i startto move slowly i heard EXACTLY that sound from your video for about 20 seconds of driving. Now every time when i sit in the car the same thing happens, few seconds of that sound and than ok. Any idea? Thank you.

[@mykbnc242]

I learn it when i was 16 with my dad,

[@carter2671]

Just wanted to add my experience to help anyone trying to diagnose problems. The second noise (the one at 6:36) was similar to the sound we heard from the front brakes of our vehicle. We brought it into the shop to get new brake pads on warranty and the mechanic said that the brake pads were gone. Like, he graded them at the 0 percentage. He said we shouldn't have really been driving on them. The grinding had also damaged the rotors a little bit so the two front rotors were replaced (they had already been resurfaced previously due to a different brake issue so we had to replace this time). Just my experience with the noise and the result. Good luck with your vehicles, folks!

[@thedarktemple9702]

Going through that rn unfortunately I can only handle the pads this week, so I just need to keep the car in town with family but thankfully it's doesn't sound like it's end of the world since I'm up in Buffalo and it's getting into the bad part of winter so a lot of snow could kill me

[@goldwolf0606]

Thanks for including the sounds. That was VERY educational.

[@noveris6538]

No.

[@bigdogkellz5120]

It was

[@rc-cj5bw]

@@noveris6538gfy cogsugga

[@lanibuck1397]

Thank you! I was FREAKING out over the sounds my car was making yet I couldn't explain it to anyone! The grinding sound you showed is exactly the same that I'm hearing! I have never changed brakes on my own so this will be a first for me! Keeping my fingers crossed! Thanks for the insight!

[@BudgetMechanicHawaii]

Hope it went well 🤙🏽

[@flowersfam3462]

Glad I found your video because that second sound is the sound I'm hearing and you are so right, it wasn't happening the other day and now it just started. Now I've got to find a video on how to change my rear rotors and rear brake pads on both sides on my 2000 Ford expedition 4.6L V8 Triton XLT so wish me luck.😏

[@daughterofgod777]

This was very informative and you explained in a way that us car illiterate folks can understand . Thank you I appreciate the time you took to add the squeak and grind sounds as well! 👍🏾

[@nate-campbell-music]

Been hearing a very faint squeak when I DON’T push the brakes, goes away when I do. I knew that brake pads had a warning indicator but I wondered if that’s what I was hearing. I clicked on this video hoping to get some answers and sure enough, you answered my question exactly. Thanks!

[@BudgetMechanicHawaii]

Glad I could help

[@keithhults8986]

Here is a condition I experienced. 1st off, 47yrs driving, I always do my own brake work. I installed Posi-quiet heavy duty metallic pads because my Sienna was not stopping well with the trailer loads I was pulling across NJ A few months after I finished trailering my brakes were lightly squeaking just rolling. The dust from the metallic pads rusted the caliper traveler pins to my calipers, causing my pads to constantly rub the rotor. I installed new caliper pin kits and POWER STOP Evolution ceramic pads last year. The pads cost $8 than Posi-quiet premium pads. The Evolution pads are designed to replace OEM They exceeded my expectations

[@123nitinanand]

Sound samples were really helpful man, really appreciate your work. Thanks

[@leeedwards6619]

I’ve never looked up any videos about brake pads or braking but I’ve never heard a video that covered as much details about any type of car systems or etc. like this video like I’ve said I’ve never looked up a video about brake pads are changing your brake pads or the different sounds your brakes make But this is an awesome description of what could be your problem concerning your brakes and the noise they make I said all of that to say this, this is a top notch video I give this video above an A+

[@BudgetMechanicHawaii]

Glad it was helpful!

[@stringqueso]

When you hit the category of brake glazing it made sense cause those are the symptoms of the car so thank you sir!

[@TheeMelloMan]

Wow a video about car noise.... And he actually included the noises.. that's amazing.

[@AntonioRibeiro-qs3fy]

I'm quite sure my Volvo just needs a brake pad replacement....Thank you for that reassurance that my baby is okay Budget Mechanic 100%

[@Piggie_happiness]

What fantastic, clear explanations! I was looking for a better understanding of my brake pads Ihave just had changed and also my discs soon to be changed. I wanted to understand how they wear down and which parts exactly as I was given a photo of my brake discs I need to have changed soon. The sounds are a brilliant addition and you are just so clear in how you describe everything. THANK YOU!!!

[@mharth6594]

Dude, you are great. Thx for helping the helpless like me.

[@ashleynum5]

Sameeee

[@paulettacox6893]

My husband knows how to fix cars

[@paulettacox6893]

@Bruce Lee my husband is the best Mr Lee

[@amiebueker9185]

@@ashleynum5 uiii

[@Cosme422]

I think you answered my question! Grinding in the rear of a 2011 MINI COOPER S R60 I just got and the pads have plenty of meat! The previous owner must have ridden the ebrake! Getting new pads to see if it goes away. Thank you!

[@melissadiaz2766]

I have a 2021 Chevy Trailblazer and the way you explained glazed break pads sounds like what I’m dealing with! I have taken my car to 4 Chevy dealers and a outside mechanic but they said everything is fine. I have loud squeaking/squealing noise mainly in the morning when I first drive my car.

[@herrheim1685]

Any update? My 21 impreza seems like it has glazing but I drive it normally

[@qoqoboyy]

brake calipers make sounds too if the pistons are worn or if it doesn't apply well or doesn't get hydraulic fluid to move it

[@chellyhc7120]

So glad came across this video. That grinding is exactly how my rear driver wheel sounds but combine that with like a click. I have no idea what it is because we took the pads off and they looked fine. But it happened exactly how u said too one day jus fine the next all of a sudden while driving. The sound makes you freak out. I thought my whole tire was about to collapse.

[@MrXxwadexX]

Thank you for actually helping and not being a loser tryna get views very insightful clear instructions with different causes and effects for certain noises 10/10 appropriate you

[@mrlij6534]

now this is how u explain stuff to people who dont know. now i know the 2nd one is my current issue. so pads are gone and rotors may need replacement , im getting the scraping sound.

[@BaybeGurrl]

Thank you! I love the way you break this down, with the sounds included.... Welp! off to get these break pads replaced, I found out the problem. 😁

[@smittywerbenjagermanjensen3814]

Do it yourself. Saves a lot of money. Chrisfix has this tutorial

[@BudgetMechanicHawaii]

You didn’t…

[@hitthendip]

@@BudgetMechanicHawaii LMFAOAOAOOAOAOAAO HE DIDDD

[@maryone9587]

You are spot on, this is exactly what's going on with my vehicle. Thank you for sharing

[@aleezalice]

Thanks for helping us out. Now i know what's the weird sound coming out when i step on my brake.

[@wes326]

My daughter's Civic had a scraping noise and it was a siezed caliper. Not too difficult to replace. Thanks for sharing.

[@alcatraz469agm9]

Grinding also happens when the rotors cover bends inward and hits the front part of the calipers making it grind against the rotors itself 💭

[@djjammindave]

GOOD POINT ALCATRAZ. THAT'S WHAT I THOUGHT IT WAS MY SITUATION, BUT NO, IT IS NOT THE CASE.

[@metemano88]

Yes the sounds helped a lot I def have a grinding noise idk how my car isn’t even a year since I got it but def helped out a lot

[@JamesSaintRave]

Thanks! I did my brakes a while ago and forgot, since I did so much work on my old car--ARG! I will listen for the sounds and get new pads if it continues.

[@robkufske4054]

Super impressed with this dude and how he delivered the information so that literally anybody can understand and identify the issue at hand! VERY well done my guy! hands down the best (and easiest) car fix vid ive seen to date!! u have a new subscriber and a like my friend. thanks

[@BudgetMechanicHawaii]

Glad you enjoyed it!

[@greensoundroom]

Squeaking Screeching Scraping Grinding Brake Noise, I got them all...Thanks for the helpful info. Time to replace the rotors and pads!!

[@BudgetMechanicHawaii]

Let us know how it goes!

[@greensoundroom]

​@@BudgetMechanicHawaii I finally found the scraping/grinding noise coming from the metal clips that were holding the pads. Installed incorrectly, and they were actually upside down, the metal clip touches the rotor, no wonder why I got the scraping/grinding noise. At first, I thought it was the old rotors/pads but actually, it was the hardware. Nonetheless, I replaced some new rotors & pads, mostly very quiet, day and night different. The only thing now I noticed is when I turn my steering wheel to both left or right sides, I noticed very light "scraping" noise but when I drive straight then it is quiet.

[@BudgetMechanicHawaii]

Jason Yip possibly still the clips. I OFTEN have to bend or otherwise slightly modify the clips of new hardware to avoid them touching the rotor. When you’re turning, things can flex just enough to tough slightly. Check the rotor for lines where the clips may be occasionally rubbing

[@iamjalenb]

love your page and how clear your message is and you actually show us instead of just talking thank you !

[@BudgetMechanicHawaii]

Thanks for the comment

[@AU79cm-3]

Thanks for the information. I just had my break pads changes 2 weeks ago, I believe the guy probably did a rush job and my car in making that noise.

[@Iamchriss01]

Very informative thank you. The squeaking started first for like a week and then went away. Didnt think anything of it. 2 weeks later starting doing that grinding noise in the front of my car. Not sure if front wheel drive makes it wear down faster than rear but i think its def my pads. No wheel vibration just a nasty grinding noise from the front even when reversing turning the wheel.

[@ox.the.hellbull]

Good video! Had a full brake job recently on my mustang and the right rear grinded quite a bit. I removed the pad added some grease and put the whole thing back together and voila no more scraping noises. Amazing what such little things can do. Now today after a long day of bumpy roads and hard driving the front left makes scraping noises at low speeds. I hope it's just the backing plate but if not I'll just repeat the process Ive done to the rear brake

[@Aziz-wl1xf]

Where did you add grease?

[@ryans413]

I’d recommend paying little more and getting the ceramic brake pads they hold up longer don’t shed any brake dust at all can withstand hot heat and heavy braking and match them with a high performance rotor

[@2023_AMP]

Helpful video. Simple but well explained. Very informative. Appreciate including the actual noise. 🎉

[@natashataylor1819]

This is exactly what I'm hearing. Can it cause drag on the vehicle too? I've started noticing a definite change in fuel consumption. I'm spending more trying to keep a full tank.

[@mountainmovedministry3396]

Nah that’s just Joe Biden 😂

[@chrisburke8991]

it helps a little but my grinding sound is a little bit different. When I press my brakes I only heard a somewhat girding sound when I'm completely stopped and I press the brake in more

[@kelithamalio364]

The groaning sound occurring in the morning when first driving the vehicle could be due to the brakes being cold and possibly sticking slightly. As the brakes warm up and are used, the noise may diminish, which could explain why it disappears after driving for a short distance

[@Notkingcheeks]

I like you provide how it sounds when is bad. We heard everything.

[@kamsy-stormclouds2596]

Exactly what I was look for, thanks for the tips, very helpful including the sounds makes real perfect.

[@huyescn]

i just replaced a new premium brake pads with re-surfaced rotor, when i press the brake,i hear the grinding noise on the brake, not the sharp noise, just the Dull noise seems gernerate by the rotor and the pads. do i have to change to new rotor or can be fixed?

[@flowersfam3462]

Glad I found your video Budget Mechanic Hawaii because that second sound is the sound I'm hearing and you are so right, it wasn't happening the other day and now it just started. Now I've got to find a video on how to change my rear rotors and rear brake pads on both sides on my 2000 Ford expedition 4.6L V8 Triton XLT so wish me luck.😏

[@alexmedina8914]

Recently got my rotors resurfaced, new brakes, they squeak while driving, stop when I apply the brakes, and has a groove on the rotor ... any ideas ? Only one wheel, rear left

[@streetfighter2608]

You helped me save $700 on brakes! You rock!

[@BudgetMechanicHawaii]

Nice work!

[@smitzu7070]

My car falls under the squeaking category without a doubt. I have drilled and slotted rotors in the front and regular rotors in the back. Rear rotors are brand new with about 1-2 Thousand miles (pads replaced at the same time). The front drilled and slotted rotors are a little older with about 5-6 Thousand miles (In great condition still) with pads I just recently replaced while attempting to diagnose my squeaking issue (around 500 or so miles on the new front pads). I took it to a maintenance crew that works on tractors and farm trucks and they could not figure it out so I took it to a professional shop where they also could not figure out what was causing the squeaking. WHAT I KNOW - I've addressed all the common issues that cause squeaking with no result, They squeak the loudest when coming to stop, they squeak while driving without any use of the brakes however it dose not do this all the time, They do NOT squeak after washing my car but will after 5-10 minutes of driving, I did not hear a single squeak sound after removing, inspecting, and cleaning all four rotors (0 issues found on all brake equipment) but they began to squeak again the next day. I'm not a professional, nor even close to one, but the only think I could think of causing the problem is the large amount of rust buildup in my rear driver side wheel from the rotor and pads that I waited way too long to replace 4 months ago. Could that rust start to accumulate in the rotor after a certain amount of use and is causing the squeak? It seems unlikely but its the only thing I can think of that is causing the problem.

[@crissgen]

Thanks for the video,helping me a lot , with all those information,my problem is the dust start it weeks ago when I backup that noise stop for a while and come back how to job it Thanks again

[@Life_Is_Adventuree]

Yeah..that true,my sister car always making noise when reversing her car every morning,this problem last for years,after checking by a trusted mechanic,he find out the previous mechanic forgot the retainer clip on right side

[@platinumSKATERS]

1:18 for squeaking sound 6:36 for grinding sound

[@Weitzenkamp]

Excellent breakdown for someone who knows just a little about brake problems!

[@haydencasteel635]

Well this has helped a lot learn about brakes and I learned I am about to spend a good dollar to go fix the reason I came here 😅😅

[@lightning4201]

Best brakes noise video ovetseen thus far. Ty.

[@indigoakaben]

Bro. Super informative video. Solved my issue without having to ask a shop.

[@tracyroberts6800]

This was very educational. I'm trying to do repairs on my old SUV myself, and I didn't get the squeaking, just the grinding and ABS/Brake lights on. I planned to get help to do the brakes this weekend, but lost the brakes today. How hard is it to replace the rotor and pads? Also, how do you know which wheel the brakes needs the work? Or do you have to remove all and check each one?

[@arani5896]

Very easy. kzbin.info/www/bejne/bIO0aoiXl7R8hsk

[@johnmmbaga6306]

Thanks for this. I think I need to have my brakes checked.

[@buckdashe2571]

I learned early in my wrenching career, even before I earned my Master Certification that 90% of brake squeak is due to unlubricated metal moving parts touching each other. The ONLY lubricant used in brake parts is silicon grease. Apply it to any metal part that contacts another metal part and your brakes will not squeak. (A brake squeak is a high frequency vibration. That’s all!) As far as “glazing,” easily prevented by scuffing pads or shoes with abrasive pad. AND new disc or fresh drums get the same treatment. Then “set” the braking surfaces by repeated stop and starts…not slamming the brakes, but smooth, aggressive application of the pedal force. The idea is to heat them up…but not too hot! (Former ASE Master Certified, Ford Certified, Porsche Cars North America Certified…now retired and am the laziest man in the universe.)

[@BudgetMechanicHawaii]

Thanks for the insights!

[@willietege1022]

Very helpfull for us the beginner/nonmechanic guys.

[@Brruuuuhhh]

Damn. My break pad is scraping the rotor, thank you for this

[@insidious1263]

Thanks mate the speaking got me today when not applying the brakes and went quiet when I press them so like you said this mean I need new brake pads, good tutorial learned alot thanks again

[@jessieboothe4108]

This guy is awesome now to fix my blinkers

[@shawneliason790]

The front brakes on my jeep with lock up after I lifted it without putting longer brake lines on…. What happened? Was it stretches your brake line and pieces break off inside and then clog the line like a check valve holding pressure in the caliper. Learned a lot that day.!!

[@ReasonablySane]

Back in the 20th century I used to get my rotors turned when I did brake jobs on my cars. Now I just buy new rotors on Amazon with the pads. It's no more expensive than turning, and I can always find other uses for old rotors.😁

[@jcastro91235]

Hi I just got my brakes put in like five days ago and they are being with you already so they’re brand new and I don’t understand why but I’m gonna take it back to the shop

[@stevelouie5928]

How about a howling sound? After you wash your car and start driving it, it makes a howling sound initially but disappears quickly. I get that same sound but when I reverse after the car sits for a while. It goes away after using the brakes and then going reverse doesn't make that sound anymore.

[@escaesco6834]

This was an excellent presentation. I appreciate all the information you provided.

[@chasepowers9186]

Wow. Incredibly easy on the eyes and such a good explanation. Thank you! 😍

[@maitrikpatel9251]

really great help, i got the information from this video regarding my car break issue which i could not explain to any mechanic because it was not often, again thank you

[@knowthings489]

Man so much info you packed in to this absolute respect

[@BudgetMechanicHawaii]

Thanks man 🤙🏽

[@marcelo_koman]

I gave you a like cos you included sounds of the brakes.

[@kristanrambissoon7246]

watched so much video and none made sense, this video is on point. thanks

[@sirfrreshh323]

This video was just ALLLL AROUND GRREAT❗❗❗✨👌🏾🎯🎯🎯

[@teslamr7333]

I get like a squeaking noise after I slow down and let go off the brakes. I believe it is coming from the rear drum brakes. Any advice what it could be and why it wouldn’t happen when I brake but only when I ease of the brakes?

[@teachenglish2030]

Yes thanks SO much for including the sounds. This video was super helpful

[@BudgetMechanicHawaii]

Glad I could help 🤙🏽

[@Finn-kf3jc]

My brakes are making a sloshing/squeaking sound. Not sure if it's definitely my brakes, but it happens when I break. I took it to the mechanic, and they said that theres no water trapped anywhere, and the brake pads and routers are new, so they aren't making the noise. They also said my suspension looks fine. Do you have any idea what that could be?

[@engchoontan8483]

Try this = match slotted-disc(slot hole size) to environmental dust-sand grain size = for auto-mechanical cleaning of brake pads = to reduce squeeks For beach and desert... ...

[@dankbruyo7800]

saved my whole day in 10 minutes 😂😂

[@RaptorZX3]

Lately i got new brake pads (ceramic, Wagner Quickstop ZD1522) and new rotors (Eurorotor 55215) installed on my Chevy Sonic, all was well for a while, until i discovered that, sometimes, when i brake, there's a high pitch squeaking noise (much more high pitched than the audio sample used here). Since it's still on warranty from the garage i got them installed at, i'll go back there to have that checked, because it's NOT normal for new brakes to do that, and i don't remember having this problem with the previous brakes and rotors. Another mechanic who did some work on my car previously, said that it's unlikely to be the calipers, but something with the pads and/or rotors. Maybe the brakes were not properly installed or something. As far as i know, the high pitch squeaking sound seem to happen mostly after i used the car for a while, when the brake pads and/or rotors seem to be warmer, after i braked with it for a couple of stops and traffic lights.

[@BudgetMechanicHawaii]

Those are tough to figure out, but often the high pitch ones are thin metal rubbing on the rotor. Needs visual inspection. Also sanding the pads down might temporarily fix it if it’s a glazing problem

[@chumaokafor8214]

Great video along with audio!

[@Alpha_7227]

Top shelf video, thanks mate, learnt heaps. Cheers. Thanks for your explanation of the glazing effect so well. My Corolla does this constantly and I live in quite a 'hilly' area where I am often on the brakes as I am driving down the hill so I keep to the speed limit.

[@BudgetMechanicHawaii]

Glad it helped!

[@earthing3696]

I'm glad you know better now.. the dumbest drivers are the ones holding the brake going down the hill instead of slowing down before the hill.

[@kikitymeck]

Thank you so much! Growing up in the 80s they made girls take home economics and wouldn't let us in auto shop. It has caused me so much grief in my life. I like not sounding like a tool when i take my car in. Auto shop would have been so much more useful than cake baking.

[@makarikevin]

I now feel like a mechanic, thanks for the awesome video :)

[@janetholyoak5118]

Super helpful! Looks like I need new pads.

[@liberty9348]

I've got an issue I can't figure out that you may be able to help me on. I bought a used 2008 Prius. It had the original brake pads and shoes, rotors and drums. It would brake fine with no noise. I do thorough maintenance when I buy used cars because hardly anyone else does... and the vehicle is in dire need of maintenance. Anyhow, I bought new rotors and drums, pads, and shoes because the pads and shoes were down to almost nothing and I might as well swap out the rotors and drums if I'm going to get new pads/shoes. I installed everything (I've done this many times on many vehicles) without issues. Now the front right sounds like metal on metal and it's all new parts... a scraping/grinding noise. Most noticeable at low speeds around town when stopping. I pulled everything apart and inspected and I don't see anything that would cause the noise and there isn't excessive wear out of the ordinary. Put it back together... same thing. I don't get it. Maybe the type of pad? The part store had several pads that would fit... I chose semi-metallic. Any insights would be greatly helpful... because the noise is annoying. Great video btw.

[@jadef6784]

Mahalo, from the 9th island (Las Vegas)😁🤙🏽

[@Edgy_Ethan]

Left a like for giving me confirmation it was my pads

[@lollygaggin6332]

I’m having trouble with my front passenger. I have brand new brake sensors, pads, and rotors all around, yet I get a squeaking noise while driving, but it goes away with brake pressure. Anyone know anything please let me know! This is the only thing wrong with my car and it’s driving me insane

[@jasonleblanc1422]

prob need a caliper or the one you have is stuck

[@JoshDeutschOfficial]

Same. Its driving me nuts while driving my ford taurus to calls. I just had everything replaced by the ford dealership. But time to take my car out of service to fix all four

[@samiurrahman8045]

Bro your explanation and presentation is soo good and comfortable

[@BudgetMechanicHawaii]

Mahalo!

[@CLIFFWILKES]

Thank you for braking this down in detail 😁👍💯

[@BudgetMechanicHawaii]

Well played sir!

[@70sfred1]

Good one! Oh stop it, ha, ha!

[@CLIFFWILKES]

@@BudgetMechanicHawaii Hey bro I was able to come back to your video again for help and I just realized what I said in my first comment lol wasn't Intentional, however again thanks for the video's they help alot keep em coming 😁👍💯

[@dylanwirkus2119]

I get a rotational rubbing or ticking sound when accelerating from my rear brakes, hopefully some new pads will fix the issue 😃

[@Dak298er]

Did it fix your issue bro that is happening to my car as well it squeaks whenever I drive and go over bumps sounds even worse 😂

[@cynicallove2160]

@@Dak298er yoo.. this is my problem now too 😭 it squeaks when i press on the brakes and where i live, they recently installed these ugly speed bumps so.. sometimes going over them makes the whole car squeak and if i go over them too roughly, the ticking noise starts when i accelerate.. 😩

[@emm3334]

What would cause a scraping sound to occur intermittently and go away when brakes are applied?

[@onkarabetsepebe205]

Thank you man. I have a nasty grinding noise on my front wheel break rotor, it even created the groove / scraped surface like. It means I'm gonna spend 😢

[@jrock-xs9vp]

Great video thanks much , I installed back breaks drum and I have an intermittent squeaking since it snowed here in in Cleveland area

[@jessj7735]

What should you do if you have contaminants on your brake pads such as dust or after a rainfall? I only get the squeaking noise after a dusty road or after it rains.

[@littlekaid3189]

is it possible to get to the grinding noise without ever ever hearing the typical squeaking worn brake pads make?

[@gabegarcia7779]

That’s what I got

[@gabegarcia7779]

Did you ever figure it out

[@littlekaid3189]

@@gabegarcia7779 sorry so late, didn't see the notification. So, it was just worn out brakes and the noise was the brakes scratching the rotors. turns out the brakes that my car had, didn't come with the little clips that make the annoying squeaking sound. I never knew that brakes were sold without those. the scratching was very minimal in my case since I took it to a shop quickly after commenting.

[@Peter-bg1ku]

Always use a lower gear when going downhill. That mitigates the brake overheating problem.

[@rebel8440]

How do u do that

[@Peter-bg1ku]

@@rebel8440 if you drive a manual, you shift down to second

[@JessiLondonV]

Mine were grinding loud as fuuck! I was scared and got them replaced finally. I hadn’t changed the pads/rotors since I got the car 7 years and 71,000 miles ago 😬. Lesson learned.

[@mfjeek]

How much was it

[@JessiLondonV]

@@mfjeek $670

[@teddywalakulombus4271]

Videos like these are what young broke people who can’t afford college yet need bc one day a lot of them will go to college and then go work at Firestone or pep boys or Midas or hell even a pets store. People need this when they have a young mind so they can work with it young and start figuring everything out soon. Js it’s good for business.

[@zoltanzafir5575]

Hi, my car have a rhythmic sound, friction. Any idea what would make this rhythmic sound?

[@teddywalakulombus4271]

The guide pins can clunk and rattle making you think it’s suspension or steering parts but in reality it’s not suspension or steering or a wheel bearing. Pep boys didn’t even know that one I guess bc they recommended they replace the master cylinder.

[@RovingRoy]

My brakes don't grind or squeak at all when i apply them BUT if I come to a complete stop, immediately afterward, it's like I hear a noise as if the body of the car is making a gurgling noise in reaction to stopping. My dealer did a brake job with all the trimmings this past summer.

[@BudgetMechanicHawaii]

Whoa…from what area of the car?

[@RovingRoy]

@@BudgetMechanicHawaii the front. It's like it lets out a groan AFTER STOPPING as if it's not happy it had to stop after going a short distance at lower speeds. It makes no noise at all while slowing down, just at complete stops sometimes not always and I hear it at the front of the car. no vibrations either when braking. Its like a groan AFTER stopping as if the body of the car is protesting.