Making a unique front suspension tilting tricycle

[@WhyNotCycles]

My front suspension tilting kit is available upon request _facebook.com/commerce/products/5439858046062339/_

[@davds8918]

Hi ! Could I put fat tires on it for example and could it handle a 30kg weight ? Thanks

[@darkhunter777]

А чем обычный волосапед не устраивает ? ))

[@higleywelding8638]

How do I order one of these? When I click on link it goes blank? Pleases advise.

[@CL-gj9mf]

How many euros? If you sell it, i buy it!

[@Имбирнаяпеченька-ю6ь]

​@@darkhunter777 равновесие надо держать, не все умеют, а учиться - травмоопасно. Неужели не очевидно?

[@sigurdurkjartansson696]

That's the best design that I've seen so far. Wish I had one.

[@Gwatts78]

Agree

[@quentinpietersen1308]

Best concept lean-steer to a standard bike I've seen. Great engineering, hope it goes to production.

[@demandred1957]

NOT a concept. Mother Earth News did this almost 30 years ago.. look it up.

[@daysetx]

@@demandred1957 Please provide links or description, i would be very grateful for this info.

[@fonwoolridge]

Wow! Been thinking of something a bit like this for a while - but this is on another level.... Bravo!

[@solarflare1008]

Great looks of this old technology. Congratulations.

[@telmozanotticardoso6064]

Um dos melhores designer de suspensão independente que já vai , ficou ótimo

[@divertechnology]

you are very human sourcer in sharing your design

[@bicyclist2]

WOW! I love it. Very Cool! Thank you.

[@kelvinleigh]

An e-bike in this configuration would be awesome!

[@grimcat27]

The extra speed and weight may make it a little dangerous. It has a wide turning radius and the suspension may be a problem. But hay if I had one I'd throw a 1500w rear direct drive on it and a class 1 controller on it.

[@jackhume4532]

Cool idea, this is something that I would have when I am a lot older, and also this tilting front duel wheels is a really good idea as you do not have to worry about the push that you can get with a standard duel rear wheel trike setup. A really cool idea.

[@dalezapple2493]

Great bike, would work great for the upcoming winter riding season

[@kadaalili7381]

where is the " making " part

[@Waterlooplein1]

As a road bike for a single person I would say it is a roadhog. But as a bike to carry cargo or a person, great idea!

[@donkihotay5748]

Roadhog as in compared to 4-wheel Godzillas? (cycling champion POV)

[@Waterlooplein1]

They are roadhogs too.

[@Therapistinthewhitehouse]

This would be great for a streamlined tilting recumbent.

[@daniele_go]

Exactly! This is my project for a tilting velomobile: kzbin.info/www/bejne/q32ad2iabNtgias

[@MusiCaninesTheMusicalDogs]

I don't understand why we don't see recumbent trikes with such technology being sold. There's gotta be a catch!

[@Therapistinthewhitehouse]

@@MusiCaninesTheMusicalDogs I suspect it’s because of a few things, cost, weight, complexity and size. These things are imo extremely overpriced in their standard, non suspension form. All the extra mechanical components are just gonna add to that. If the wheels are inboard they or the tilting mechanism needs to move, this movement takes up space meaning the body needs to be bigger to accommodate it and therefore less aerodynamic and also heavier.

[@MusiCaninesTheMusicalDogs]

@@Therapistinthewhitehouse Thank you for sharing your thoughts!

[@ricknoe942]

@@Therapistinthewhitehouse "These things are imo extremely overpriced in their standard, non suspension form." - I couldn't agree more!

[@alejandrocastro211]

beautiful simplicity

[@xcrcrypt]

this is something else my friend welll done!

[@jailsonmedeiros4444]

Cara vc é um gênio parabéns pela tua invenção 👏

[@julivalalmeidacardoso5745]

Este cara er fera

[@samday6621]

Very cool and well executed. I’m interested to see how you distribute any load carried in front and if you need to extend the wheel base (front to back) to keep the rear grounded.

[@IXIskarfaceIXI]

This setup look like any excessive load in the front would resuslt in a loss of traction in the rear, so extending the lentgh of the bike seem to be a prerequisite. Your worry are real.

[@WhyNotCycles]

Porsche decided to place carrera's engine outside wheelbase at the rear of the car. They took this decision thinking of a car like more than an engine and four wheels. Passengers, bodywork and driving situations also affects to the traction behavior of the vehicle, especially at my design, carrying the weight of a human at the front, i think is possible, by the time a driver sitting at his possition. It would be a problem if I had no suspension on the front. In accidental breaking, the rear wheel would lose the ground if it was a little weight in front!

[@albertogutirrezjuarez239]

Wow, thats amazing, i need one like that

[@Hudsonkem]

i really loved your design bro, after I saw it, now i am desperate to do in my bike too.

[@chingachg00k]

That

[@Hudsonkem]

@@chingachg00k ?

[@BLACK-hl4ic]

O Men! It's awesome It's my dream proto cycle. You are Great 👍👍👍👍

[@mgut17]

misleading title, should not be making but showing us a tilting tricycle

[@saulbenadiba9449]

Can we buy this bike somewhere in canada

[@didierdesbordeplombierbordeaux]

He sales the blueprint to make it ;)

[@heidymatinez7356]

Works the way it is supposed to. Just Good

[@unclepete100]

That is really cool man 👍👍

[@jeromeriedl]

That thing is so cool! I would love the try that bike out. Also it would be really cool to see it with 2 wheels in the back. I don’t even want to think about what pulling a wheelie feels like. Oh wait, actually I do.

[@magixcue9512]

Thanks for sharing your videos, I am building and design my project, unfortunately, I do not have any workshop and or any special tools. All parts built is bit by bit, part by part. I still working on it for better design on the suspension parts. Hope to complete it !

[@guillermoaguirre8500]

Si es hermoso.su diseño. Comparta más su diseño por fabor

[@kingtut5923]

Very nice idea.

[@raantan6683]

Now this is something I need when I go out to avoid commuting

[@tiliniglesias5494]

Wow bro you've got a three tires jewell thanks for this delicious video I watched it twice

[@snoopydoggy5196]

I'm going to try to make this with my everlast welder. I like the stability combined with the maneuverability.

[@alvarobotelhovillelaaprendernu]

És o Rei da suspensão para triciclo vou tentar fazer uma cópia kkkk + 1 vez parabéns 👏

[@benyahiamohamed9230]

Nice work continue 👏👏👏👏👏👍👍👍👍👍👍👍

[@brightshadows3931]

Did everyone read "making"? Or just me? Title should be "riding". 1 dislike for clickbait.

[@halphantom2274]

lol. congrats! you get 1000 points for entitlement. Is it really too much for you to just click on some points in the vid and then go somewhere else, if it wasn't what you searched for?

[@LifesAbe-ach]

Exactly Bright sick of the false labelling on here , lifes to short to waste watching this crap

[@111tier]

Огонь!!! Если бы немного чертежей, то можно собирать такой в гараже!

[@andycapo9you]

Very nice work, idea and setup. The only big problem here will be to drive with the system loaded, it will make you have arms like Arnold... 😅 Therefor the traditional steering system exists; to make the wheels change directions and not the whole load. I personally will put the damper inside the lower arm, that way, it won't change it's geometry everytime you tilt. Good Job!

[@shonnburton2757]

Awesome! This has so many applications. Would love something like this on a 30mph e-bike. Would also like a conversion kit that could be used on any bike. Let me know when I can buy one!

[@douglasgallardojr4759]

You can buy one now. See the pinned comment.

[@ianleyillustrado4351]

Amazing. I'm from Philippines. Thanks for sharing

[@maxgood42]

I like the simplicity of this design awesome

[@jiroyamamoto2878]

except the wheels need to turn at the hubs, like a car. In this design, the entire suspension turns and that takes up lots of space.

[@g.b.9429]

Well done. Good job

[@koperasisan6663]

Simple and smart idea. . .

[@shaynescobie]

Beautiful machine

[@ahmadmada5493]

Very interesting, i love it.. btw what your backsound this video?

[@donkihotay5748]

Here you get something creative and wonderful, free, costing only your time and attention, and still some people whine?

[@strongblack4569]

Nice bike 👌💪 wish I had one

[@patrickpanhuysen9618]

Add a cable operated locking device on the suspension to keep the bike upright during standstill. See other video's on the tube. Parts of a discbrake are used for that.

[@IXIskarfaceIXI]

Good thinking.

[@emgee44]

Would like to see this on a recumbent trike, that would be my preference

[@SEMPERE3D]

Flipant, (awesome) I love your work

[@robertmoore119]

Very nice!

[@stopglobalswarming]

This isn’t the first of these made, but it is nice. If you have the steering angle and caster correct you can really shred down hill.

[@billhillyer334]

Nice soft squishy ride if a rear swing arm were to be installed

[@chanchleshamrate2624]

Excellent brother

[@chuckcavan3036]

Man is that front tilting like a kit? Man would love that if it goes on sale.

[@WhyNotCycles]

No sorry! it is not for sale..

[@allegrokids4426]

Excelent! Perfect! But ¿what's happen with the rear suspencion for back wheel?

[@hmc.yiyelzedekalphametamor550]

Excellent Job. Get Investors, Broski. Promote That.

[@mittapelliravikiran6942]

Camera work is 👍

[@Dr.Comers]

Everything is awesome! One question - For what?)))

[@devadathans5506]

Higher stability compared to bikes and trikes.

[@АндрейКоннов-ъ6ф]

Круто и в пробке проехать в междурядье можно, и на покрышках съэкономить!

[@htd7814]

Verry good!

[@phatmeow7764]

Good Lord with a Galea helmet and a Gladius in a scabbard riding this one almost feels like a Roman legionary! I jest but great design - maybe a wee bit narrower to be more nimble in cycling paths/urban environments?

[@romandybala]

All the convenience of a bike with the width and complexity of a car.How do you get it thru a gate or doorway?

[@pranavchaugule1448]

Use motor at rear hub to assist pedaling !😊👌 Awesome work!

[@AlexanderEresov]

This is not "making", this is "riding"

[@c9rm3n]

I want to see a close up of how you did the front end. 😢

[@JakobusVdL]

Hi, very cool looking trike. Does the bike part become less stable because the front wheel is no longer directly attached to the forks? And how do you lock out the tilting when you park it?

[@pedrolambrusco8190]

How do you figure out how strong the front shock absorber needs to be?

[@bidyarajdoley9626]

Good job

[@armandomunoz3190]

Ay that's awesome . Shout out from El Salvador

[@sato547]

quiza este te ponga pedo kzbin.info/www/bejne/pYmxemCQltiSnK8&ab_channel=RWINSOLO

[@ajayarajbhandari6584]

How to make by self at home Can you send step by step procedure and items/ parts required for it. Great job 👌 you have done.

[@hennayakakumarasiri]

Thanks !

[@rameswarareddyn3422]

Nice tricycle

[@Lardzor]

It looks like each front wheel is connected to a hub, and the hub is connected to the frame by upper and lower controller arms. The single shock is connected to the top of both hubs and placed above the upper controller arms. could you not connect the shock to the bottom of each hub, and place the shock between the upper and lower controller arms? I think it would work, and compact the design.

[@ianblueadventure]

Wish I could have one bro!!!! Wow

[@Gilsun2]

Very nice...

[@cesarvalerio4292]

Nice! Greetings from Brasil

[@zorroinhell5549]

Could this front end be adapted to a recumbent bike?

[@ItsJustGilly]

I'm eager to know as well

[@zorroinhell5549]

@@ItsJustGilly Why don't you contact some recumbent bike builders like Azub, Bacchetta, HP Velotechnik and try converting one of their bikes?

[@WhyNotCycles]

@Zorro in Hell you have to... resize it. :/

[@pfitz6693]

Very cool!

[@darylogle6696]

Make a 1000w electric one with rear Suspension also

[@abiseniyya]

I don't see the bike tilting, but the earth is.

[@ashanarchy7255]

So you turn the trike by tilting but not turning the wheels?

[@Имбирнаяпеченька-ю6ь]

Bro are you still making them? I need this amazing unit for my mum's bicycle

[@ekopurnomo9802]

tidak bosan aku melihat video ini walaupun berkali-kali melihatnya

[@jack-qb8fq]

Excuse me, When the first two wheel positions are on the ground at different heights, the shock absorber can still maintain stability when tilted a few degrees.

[@khalidbhutta2618]

very fine product how much is the price?

[@alvarobotelhovillelaaprendernu]

Parabéns 👏 pelo projeto 👏 muito bom mesmo 👏 um abraço

[@diogodantas3542]

Awesome design. Very well engineering. 👏👍 My father had an accident so now I have a tricycle to take “walks” with him and this would be perfect to add to it. Please tell me what I need to do for you to send me the blueprints or the cad Project of this?

[@rafaelsantos7190]

what kind of metal materials use for this 3 wheels bike

[@pedrolambrusco8190]

I have recently gotten interested in tilting bikes. And trying to learn how to do it. It appears to me that only the shock absorber is not attached to the main frame. Instead it just kind of floats and is connected to both a arms. Everything else is connected as on a mormal bike. Is this correct??? Thanks, great job! Pete

[@BUZZ_TEA]

reminds me of the noomad but with a kind of per wheel suspension

[@Alvio64]

does it stand up on its own?

[@dheerajvashishtphysics6815]

Excellent

[@miguelboladomuniz4719]

Hola, tengo esclerosis y me gustaría convertir mi bicicleta en un triciclo por la estabilidad y me encanta esta propuesta que presentas me podías indicar como o donde hacerlo? Muchas gracias.

[@somedude-lc5dy]

does it hold you upright or do you still balance like a normal bike?

[@antoon777]

Wow. Just Awesome. Thumbs Up !

[@yasseralsaidi1168]

Now I just need a front basket for shopping items

[@christianpaulroldan4010]

How to keep it upright?

[@dennynugrahanatajaya6665]

keren mang euy semoga beruntung...

[@harmanvi]

How much it costed bro. Nice stay blessed

[@sjvche7675]

What about on a recumbent trike?

[@Efra-tesa0818]

Excellent bike👍 the background music name please.

[@ikramkarim5318]

I local this bike. White 125cc . and please name music .please