WiFi DIY RF433 Tuya Smart Curtain Switch Module|Setup&Wiring Smart Home Voice Control Google Alexa

[@mariooverman]

I want to install this unit without a. Manual control option. That should work just fine right? In the current situation all wires are on the wall and I want to delete this fully. Unit will be outside under the sun visor.

[@moes.official]

You can contact this email, we will have a special customer service to answer for you [e-mail]

[@djleonida3535]

How it's possible that curtain electronic in app when operate show weak signal but another curtain electonic which is more further shows that everything is fine? Why in app when more curtains put in group the blue blinking button for up, down or stop newer stop blinking when operate?

[@moes.official]

You can contact this email, we will have a special customer service to answer for you [e-mail]

[@turvucancun3811]

can i control multiple rolling shutters at the same time with one remote controller ?

[@moes.official]

Yes, multiple roller shutters can be configured

[@djleonida3535]

​@@moes.officialif it's more curtains programed on one channel on remote control why some curtains didnt received the signal then happend if we have 5 curtains and put it up 2 of them are going up but others nothing happend?

[@icy3dge]

Do i need neutral wire for this to work ?

[@moes.official]

yes, neutral wire is required for curtain switch

[@KyleHines-c5k]

Just curious, will this work with regular blinds or do they need to be motorized? If this kit doesn’t include a blind motor, do you have a suggestion for one that is good for retrofitting to non-motorized blinds (and is connectable to 120/240vlts?

[@moes.official]

This kit does not include the blind motor. Of course, we have matching motors for sale on our website.

[@moes.official]

moes.net

[@LandmarkDeutschland]

After installing the Module the manual switch, RF-control and Zigbee work. But out courtain lowers only to 40%, the motor stopping after about 10s. It will not go any further down, no matter what I try. To fully close, if would need about 25s. Can I configure this?

[@moes.official]

You can contact this email, we will have a special customer service to answer for you [e-mail]

[@emedoblev]

Para modulo zigbee seria igual?

[@moes.official]

Most of the functionality is the same, but you will need a gateway

[@luis77140]

Bonjour Vous avez la version sans interrupteur, merci Hello You have the version without switch, thank you

[@cslloyd1]

Without wiring in my traditional switch, I can go up or down or *stop* in between. When i wire in the traditional switch, the app controls all still work as before, BUT the traditional switch will only go up or down - it will NOT STOP in between. Is this expected behavior of the traditional switch?

[@moes.official]

for the stop feature of the traditional switch,it is just functional by pressing the uo or down button twice,like press again when you press for up or down

[@cslloyd1]

@@moes.official it sounds like you’re describing a “momentary” switch. my “traditional” switch is not a momentary - its a rocker switch that has three positions (up, down, off/middle). It locks up or down so I cannot push “up” again without going to the middle/off position. And going to off does not stop it, nor does going off then on then off.

[@moes.official]

@@cslloyd1 If the three-button curtain switch is pressed in another direction, will it stop? In the open state, press the button directly to the off state, and the device will stop instead of off. If this is the case, it is necessary to change the steering switch of one motor to positive turn in the APP

[@cslloyd1]

@@moes.official I’ve decided to leave the traditional switch out of the loop. This video above is ok for marketing purposes, but it would be better if your company could produce a more detailed installation video for the NorthAmerican market which has specific colors for wiring (Line, Load, Neutral, Ground). The wire coloring of this video is very different from what we’re accustomed to. Also, the calibration feature of the smart life app seems broken, but perhaps I’m doing something wrong. The installation video needs more detail on how to configure the Smart Life app

[@moes.official]

@@cslloyd1 we will record a new detailed video for installing and app configuration

[@yamandur]

Hello, I bought one of this, but my curtain has 5 wires in, green/yellow, blue, brown, black and white. I try multiple options but the curtains doesn't move, I can see on the app and press the buttons, the module make sounds like it's working, but the curtain doesn't move, can you help me?

[@moes.official]

It may be a wiring problem, you can contact our email, we will have someone to answer for you

[@moes.official]

[e-mail]

[@syruce76]

HI, how can you reset position, the " accurate Calibration " never works, in the app my curtain is at 100% but in reality is at 20%

[@moes.official]

You can contact this email, we will have a special customer service to answer for you [e-mail]

[@ЂорђеЂурић-щ6ь]

Can i control one switch with multiple RF remotes?

[@moes.official]

yes,It supports multiple RF remotes

[@nevuspilosus7404]

Hello friends. can someone help me with the installation of this device. when I turn it on, it keeps lowering and raising the blinds, every 2 minutes. It won't stop. Does anyone know what it is? Thank you.

[@moes.official]

you mean control by the app with this issued?

[@alostafawzi]

music is loud

[@moes.official]

thanks for your advice 😄