Rebuilding the rear diff on the 2012 wildcat 1000. New bearings and seals.
Пікірлер: 9
@KRACRider5 ай бұрын
If you heat the housing with a heat gun it will slide together a lot smoother with out so much pounding.
@ArchwayPerformance Жыл бұрын
Freeze the bearing, heat the housing in oven or with a heat gun. Bearing drops right in with out hammering on it a bunch. But I’ve done your way, it works! Good video!
@Cronicncars2 жыл бұрын
A good trick is tape the old bearing to the new with black tape. It peels off as the bearing goes in anyway. Works good.
@DarrylEnns-hk9xgАй бұрын
Weird my rear diff has a spring in the cuppler what ever it's called. My sld blew apart putting it back together is a pain..is it supposed to be super tight so it doesn't move?
@jessecox9194 ай бұрын
I have a rear differential problem not sure exactly what yet. It only drives in 4wd. How can I check if it’s the coupler or something else
@austinbuehrle3779 ай бұрын
How does that last silver spline piece that connects to the side by sides shaft go in . Is the only piece you didn’t put back on
@KRACRider5 ай бұрын
The gear teeth need to be polished before installing them, especially new ones.
@rightathomecontracting51023 ай бұрын
What about the gears I have a bad diff and can’t find one
@buggymanandhistoys64763 ай бұрын
The gears were ok. Not the worst I ever saw. We rebuilt because the seals were leaking and the diff was full of muddy water