This channel definitely deserves more subs. Jealous of the Porsche camper.
@RadFactoryGav4 күн бұрын
Thank you!!
@maneotis4g63t4 күн бұрын
That’s what I’m saying dude!
@OceanusSeafreeze4 күн бұрын
A $40 nibbi carb with the 38mm intake will open that power up a lot. I had this motor in an Enduro and that made a huge difference.
@RadFactoryGav4 күн бұрын
No way, we will definitely have to try that
@whattheelijah2 күн бұрын
38mm? as in the carbs intake side? these engines are like good for 19mm to 24-26mm max iirc anything more than that and you need to consider working the head so everything flows nicely
@OceanusSeafreeze2 күн бұрын
@whattheelijah It was 32mm. And whatever the magic is they thump louder and faster. The factory carb on this motor is detuned to comply with modern emissions. You could put a p22 but when I did it only helped a little. The bigger one made a bigger difference for whatever reason.
@whattheelijah2 күн бұрын
@@OceanusSeafreeze amazing, i got myself a cheap PWK clone for about the same price, the air intake is 50mm and to the engine its 28mm, dunno if it's too much for a little 110cc, might do some work on the manifold
@kriswhite9324Күн бұрын
@@RadFactoryGav also make sure to make a exhaust system that has a power bomb (fmf are known to use those for their exhaust systems) and get a decent fmf muffler for it as curious to see how quiet that engine can get with a 250cc fmf exhaust as I have the 140 version of that engine by a company called thumpstar and they are called the YX-R which they have a z40 race cam in them and the engines really pick up with a 26mm carb which is always nice and also been watching since the start of the porsche-up truck much love from australia :)
@99Slowbruhh15 сағат бұрын
So cool to see the dirt bike finally getting brought back to life!!
@sk8klown884 күн бұрын
It was awesome to be there hanging out when you got this thing running! Hope this channel blows up, you guys deserve it.
@RadFactoryGav4 күн бұрын
Thanks man! It was cool to have you over!
@AgatasKatkus4 күн бұрын
You guys need to add bigger jets to the carb or drill out the jets currently in it. At Denver’s altitude it’s probably running pretty lean. You would have a better throttle response and gain some power. As someone who used to live in Denver and rode carbureted bikes around I highly recommend it. 🤘🤙
@RadFactoryGav4 күн бұрын
Hell ya we will look into it
@RobertHatfull-df4ch2 күн бұрын
I had a kx with a blown up engine and a crash damaged 125 honda innova I measured up and cut the mount from the innova ,cut the frame to clear the engine and reversed the cut frame to restore strength I deleted the electric start and used the loom from the innova I had some problems with the rear sprocket but used a smaller one to suit the engine and made a hybrid kick starter and brake pedal due to clearance it worked quite well and only cost me bout £40 allin but I recouped a lot back selling the unused parts from both bikes on Ebay.
@SidewaySensation4 күн бұрын
Love the humor from both of you. Nice clean build. Keep the coming 🎉
@RadFactoryGav4 күн бұрын
Thank you! Glad you enjoyed it
@pauliewalnuts2404 күн бұрын
Your missing out on a huge opportunity. I could have missed it, but you never mentioned the size of this engine, or the price. Why dont you include an affiliate link to buy this engine? Youd get 5-10% for the sale & while you wont sell hundreds, surely a couple dozen isnt unrealistic. Or you could contact go power sports or another sponsor to work a deal out for a free engine in return for promoting it. Work smarter AND harder.
@RadFactoryGav4 күн бұрын
😂 that is actually a really great idea
@BentonL4 күн бұрын
Its usually 2% but otherwise I totally agree.
@PkwyDrive134 күн бұрын
Because it’s temu…everybody knows that company is shady as hell and posting affiliate links for them probably does more harm than good 😂
@physicsman24774 күн бұрын
It's obviously a 125cc motor.
@mondude97544 күн бұрын
@physicsman2477110s look exactly the same but yeah it’s definitely no less than 110
@aski1529Күн бұрын
I would definetily change the factory oil as soon as possible
@lect0n720 сағат бұрын
He’s have been better off to have bought a Yamaha KT100 SprintKart motor, and he’d have essentially built an RT100 with modern rear suspension, what I wanted when I was 8 years-old
@RadFactoryGav12 сағат бұрын
Even better we have them when we’re in our thirties 😂
@JamesNewberry-t9lКүн бұрын
The eye contact with the camera when you were sanding the handlebar had me dying 😂😂😂
@RadFactoryGavКүн бұрын
😂😂😂
@Turbohonda4284 күн бұрын
You Gaines a new sub!! Love this type of content, doing work that you don't always believe will work, trust me you work together, brainstorm, write ideas, and just go with it, if something doesn't work right away, if there's a will, there's a way. Cheers!! 😊 Love the pit bike content, it's definitely a trend again!! Keep up the uploads you guys are doing great!
@Turbohonda4284 күн бұрын
Also you guys did some damn good work with those ideas for the frame reinforcement, that's smart as fuck with the hinge!
@RadFactoryGav4 күн бұрын
Cheers! Thank you!
@RadFactoryGav4 күн бұрын
@@Turbohonda428every now and again I get a good idea 😂
@TheLooneysGarage4 күн бұрын
I think it's cool, but if it were me, I would rebuild the TTR125 engine because it has a clutch, while the current one does not.
@RadFactoryGav4 күн бұрын
If it were for us we probably would but it is definitely better for Laylaa without the clutch
@tylarpratt6439Күн бұрын
6 pin on engine is to show what gear your in if u install gauge
@RadFactoryGavКүн бұрын
Ahhhhh we fortunately we don’t need to that
@phat-kid2 күн бұрын
you needed a knockoff yamaha engine but those knockoff honda engines like the one you got are amazing. maybe an upgrade.
@SirDrakeNewcanon3 күн бұрын
You can say anything but these Chinese Honda clone engines are pretty good!
@RadFactoryGav2 күн бұрын
It’s better than I thought for sure
@travisreed5609Күн бұрын
Its assembly lube ,drain it out and replace with quality lube,no baby oil
@gphilipc20312 күн бұрын
Dude!!! That looks like a MILLIONAIRE's bike.
@RadFactoryGav2 күн бұрын
😂😂😂😂😂😂
@Icejay9324 күн бұрын
This channel is like southern comfort food
@RadFactoryGav4 күн бұрын
In that sense that it is possibly bad for your health 😂
@Icejay9324 күн бұрын
@@RadFactoryGavplease go back to the SpongeBob bubble exhaust 🙏🙏
@RadFactoryGav4 күн бұрын
@@Icejay932😂😂😂 that would be so funny
@DUKE_of_RAMBLE4 күн бұрын
I don't disagree, but.... I feel like it makes just as much sense if you remove "food"... Ideas conceived *_and_* executed whilst under the influence of Southern Comfort. 😏🥃
@Kraxt0n2 күн бұрын
Ive had (ALOT) around 8 pit bikes, with these sideways engines. be careful "revving" and kicking that in gear, or youll find yourself tearing apart the bottom half to swap out 2nd gear (or just swapping a good bottom half into a non busted casing). *yea, took 2 and made 1 good one a few times around*. if you want more "umph" change the rear sprocket.
@RadFactoryGav2 күн бұрын
All fantastic advice
@somagraphics4 күн бұрын
It's criminal how few subs you have. Especially after the porsche.
@benstrait3332 күн бұрын
Next episode: watch while we put a Temu turbo on the Temu 2-cycle🤣
@RadFactoryGav2 күн бұрын
Heck yes we should
@ANDROID2042 күн бұрын
It's a Honda clone, these engines were engineered by Honda in the 70s and 80s
@RadFactoryGav2 күн бұрын
Hopefully it works as good long term!
@farrahlynКүн бұрын
Buy the right frame shish
@vancemacd63154 күн бұрын
For. 200 dollar engine from temu, I'm impressed. I'm sure an after market carb would let that thang breath better.
@RadFactoryGav4 күн бұрын
That seems to be the general consensus lol we will have to find one
@DUKE_of_RAMBLE4 күн бұрын
Shirt idea for Gavin: *WHERE THERE'S A* *-WILL-** WELDER* *THERE'S A WAY!* _-Rad Factory_
@RadFactoryGav4 күн бұрын
😂😂😂 hell ya
@jasperdomacena64912 күн бұрын
would have got more power if you instead got the CG250 Engine
@Anubisviech2 күн бұрын
Always funny when you see americans using "premium" for fuel that you cant even buy in some countries because no one would offer such a low octance fuel.
@RadFactoryGav2 күн бұрын
😂😂hilarious
@danielhall4678Күн бұрын
Change sprockets to suit dirt ride rather than street economy that engine is geared for
@RadFactoryGav22 сағат бұрын
Honestly a great idea!
@truetech41582 күн бұрын
Put that motor on the smaller bike, and it would have more power to weight ratio.
@DopaSlides3 күн бұрын
Look for the ZS212cc for future projects. 20 something HP 5 speed monster. love mine. W video guys!
@RadFactoryGav3 күн бұрын
Will do!!
@friskydingo53704 күн бұрын
Good times 👍 Sponge Bob bubble bike 😂
@RadFactoryGav4 күн бұрын
It literally sounds exactly the same right!?
@pirsensor11862 күн бұрын
American's realy think the rest of the world are stupid but the rest of the world life in america 😂
@The.Rad.Factory2 күн бұрын
Yes 😊
@SMMBHQ-cg2zy3 күн бұрын
I think you will have more fun with these little bikes than 250's and 450's , however you most likely need all of them
@RadFactoryGav2 күн бұрын
Yes!! More dirt bikes!! Lol
@Linas43124 күн бұрын
Did I miss the part where they add oil to the engine?
@RadFactoryGav4 күн бұрын
😂😂 we just used the oil it shipped with
@SK80RDI3424 күн бұрын
man i like how this is easy to do unlike most diy shit
@RadFactoryGav4 күн бұрын
😂😂 it was still a whole week of fab work lol. Probably would have been easier to do a full motor rebuild
@SK80RDI3424 күн бұрын
@@RadFactoryGav ive rebuilt a few in my time id say no
@jbclemente10992 күн бұрын
Could have used the version with 4 speeds and a clutch would have turned out so much better
@RadFactoryGav2 күн бұрын
We wanted the semi auto for easy of practice for Laylaa
@tommygreist9560Күн бұрын
That's sick man!❤😮
@SirDrakeNewcanon3 күн бұрын
I gave you a like for reinforcing the frame! Good job, the original engine was part of the frame. A lazy one would had hope that the frame is strong enough by itself.
@The.Rad.Factory3 күн бұрын
Appreciate you noticing that! We really do want it to last
@kapilsds7Күн бұрын
100% Honda Super Cub engine copy.
@RadFactoryGavКүн бұрын
😂😂 probably
@seanbragg16963 күн бұрын
Put a 1p56fmj cylinder piston and z40 head on it its probably a 13 mm rod pin
@RadFactoryGav2 күн бұрын
Interesting idea
@icaruseffect40722 күн бұрын
😅😅😅 you should have bought a Yamaha clone instead of a Honda clone..
@jackfrosty79ify2 күн бұрын
Big bore next .
@RadFactoryGav2 күн бұрын
😂😂😂 heck ya
@RedDevilTuning4 күн бұрын
Put a Lifan/Suzuki AX100 engine instead, much more fun, 100CC 2T, 28mm Keihin, and lots of fun for cheap.
@RadFactoryGav4 күн бұрын
That would be rad for sure!
@Biokemist-o3k4 күн бұрын
Super cool!!I was thinking about using one of those engines for an off road mower....-John
@DUKE_of_RAMBLE4 күн бұрын
Pit Bike wheelie-bar.... when?? And if it does happen, can I request that it have an old rollerskate strapped to it? _(or, since it might be easier to source, a rollerblade)_
@RadFactoryGav4 күн бұрын
I love this idea
@gh0stm0nst3r64 күн бұрын
stay rad, bros
@RadFactoryGav4 күн бұрын
Stay rad!! 🤘
@JTL-DK3 сағат бұрын
Fun Fact... You can get that motor with the starter at the buttom instead of at the top of the motor, so the carb is turning backwards instead of forward, so it would have fit so much better... maybe you should have bought that version instead ;-)
@markdove5930Күн бұрын
Why is a guy with a wife wearing pink? Im confused 😂
@The.Rad.FactoryКүн бұрын
He likes it
@AboxofMonstersКүн бұрын
You need a smaller sprocket on the back and you need a quality gel battery if you don’t have kickstart those standard batteries will let you down .
@dragonsoul52124 күн бұрын
You can flip the shifter to make it closer
@dragonsoul52124 күн бұрын
Or favricate a shifter with link
@RadFactoryGav4 күн бұрын
It would need some sort of link for sure. The actual effort required to shift is nuts. We did fix it in the next video though
@lawrenceayres93774 күн бұрын
I know I'm way out of left field here. But I'd love to see you boys get ahold of a PT Cruiser, and give it the RAD treatment. 🤘😂🤘
@The.Rad.Factory4 күн бұрын
The first car video Gavin and I ever made back in 2020 when we had a different channel was rip a pt cruiser at a motocross track. It lasted about 5 minutes 😂
@RadFactoryGav4 күн бұрын
Pt cruiser drift car?
@ZaydenRoberts-xz2gb4 күн бұрын
Would you sell all of the old TTR stuff?
@RadFactoryGav4 күн бұрын
I bet he would!
@The.Rad.Factory4 күн бұрын
If you’re in Colorado yes. Can’t ship it
@EdwardGoss-n9u3 күн бұрын
Why on earth wouldn’t you just fix the stock engine parts are EVERYWHERE on ebay
@RadFactoryGav2 күн бұрын
It broke every time he rebuilt it 😂
@tacticooldennis3 күн бұрын
It reminds me of the original 4 strokes in the 80s. just a tractor. Time for a Temu turbo! :P
@The.Rad.Factory3 күн бұрын
😁 coming soon
@henkneijer772 күн бұрын
why didn't you exchange the engine and order a stationary one a few weeks after you failed to film the video for the third time. no, of course you have to completely screw up the good Yamaha frame. really stupid. what can you say, really Hilly Billy... and total botch! and why shouldn't this new engine work? it's a Chinese standard engine that has been used billions of times in China for ages. besides, 4-stroke dirt bikes are boring. in the field only 2-stroke engines with bite...
@tedcadillac13883 күн бұрын
C-clamps are always the best way to connect electrical wires 😂
@The.Rad.Factory3 күн бұрын
Indeed 😊
@jimmieftw4 күн бұрын
Nice video guys, new to the channel! =) I've done the same a couple of years ago, I bought a cheap lifan 125cc manual. If you want to ride with more power, you should look for YX 150cc or Daytona 150cc, Lifan 150cc. I dont know the brand of that engine but my guess is like "loncin" and they are pretty slow, but they work for years and perfect for the kids. Right now I'm working on a daytona 115cc manual and it's rly strong. Maybe worth with that good Yamaha bike you guys have. //Sweden
@RadFactoryGav4 күн бұрын
That is so rad! And it’s more of a kids set up for sure but that is kinda perfect honestly
@LukesRandomShit4 күн бұрын
You could have just got a direct fit china motor for same price 😂
@RadFactoryGav4 күн бұрын
😂😂 probably
@IggyBiggy3 күн бұрын
hahahaha that battery clamp is sketchy AF.
@RadFactoryGav2 күн бұрын
No way that thing is solid! The battery is locked in
@IggyBiggy2 күн бұрын
@@RadFactoryGav C clamp it up then ;) hahah
@ethantolliver36224 күн бұрын
You should add a after market exhaust for better sound and more power
@The.Rad.Factory4 күн бұрын
We’re thinking turbo 😁
@6.5creedmoorrips6creedmoor24 күн бұрын
No way i would've done this. Would've rebuild the yamaha motor
@The.Rad.Factory4 күн бұрын
Yes dear that’s the entire purpose of our channel. Doing things normal people won’t do 😊
@RadFactoryGav4 күн бұрын
Probably smarter but we had to for science! Lol
@michealcarroll3914 күн бұрын
Should have gotten the $300 200cc on temu would have fit with less work
@RadFactoryGav4 күн бұрын
Possibly!!
@dannyharris5310Күн бұрын
Pretty cool
@sillywillie64844 күн бұрын
Hell yeah! Nice!
@RadFactoryGav4 күн бұрын
Thank you🎉
@michaelhauser6034 күн бұрын
buy first and ask questions later 👍
@RadFactoryGav4 күн бұрын
So far it seems to be working for us😂
@michaelhauser6033 күн бұрын
@@RadFactoryGav that's awesome. gotta love the relatively low risk, high reward projects. I have a Honda three wheeler that could take one of these or gy6 or whatever Chinese engine.
@Oxnaf4 күн бұрын
You couldn't get a Yamaha engine to work after a year? You sure?
@RadFactoryGav4 күн бұрын
😂😂 not a year of full time trying but I can bounce for Dylan that he tried like 6 times
@NikolasMavros-o1d3 күн бұрын
You experts are missing the point of the video 🤫🤫🤫
@The.Rad.Factory3 күн бұрын
😂😂😂 yes
@joshbob-sx7kd4 күн бұрын
How small are these dudes to make a ttr125 look big
@JustinMcnamara-i3e4 күн бұрын
Found the same motor for 179 on ebay free shipping got to me in 5 days
@RadFactoryGav4 күн бұрын
Heck ya!!
@johnathongraham19824 күн бұрын
Change the ecu for more power
@RadFactoryGav4 күн бұрын
That could work!
@johnathongraham19824 күн бұрын
@ I done it on my little boys ltz, made a massive difference
@RadFactoryGav4 күн бұрын
@@johnathongraham1982I’ll look into it!
@johnburke-u7p4 күн бұрын
it doesnt have a ecu if you know anything youd know its a carbed motor if it was fuel injected it would have a ecu and the only thing close to one is a cdi which cant be upgraded i know a ltz 400 has a ecu though so it makes sense why your confused not many people have knowledge about older style motors im a mechanic so i should know the difference and theres 5 major differences
@xgouldiex4 күн бұрын
There is a upgraded ecu for these all it does is increase the rev limiter, standard one retards the spark once you hit a certain rpm
@ryzen3974 күн бұрын
lmao its the bubble engine
@RadFactoryGav4 күн бұрын
Part of me wishes we had kept it sounding like that instead of putting an exhaust on it
@masterofnonetech3 күн бұрын
I hope ya'll put some oil in it! 😆
@reesewilliamson33464 күн бұрын
worst way to downgrade one of the best bikes ever made
@RadFactoryGav4 күн бұрын
😂😂😂 fair shot
@jake360flip4 күн бұрын
This video hurt my soul.
@ChaFairchild4 күн бұрын
Did you miss the part where they bought only a frame with no engine?
@Oxnaf4 күн бұрын
@@ChaFairchild They said they couldn't get the Yamaha engine to run, so they had a Yamaha engine.
@eibbionlaird3 күн бұрын
@@OxnafAnd it was junk. So they used one that actually worked. I just swapped a electric start predator 420 into my 97 Suzuki dr200. Best upgrade ever
@Wqeeeeftrc-roblox4 күн бұрын
How much was that motor😂😂
@RadFactoryGav3 күн бұрын
Pretty cheap for sure
@DaltonDuncan19924 күн бұрын
It’s a temaha
@RadFactoryGav4 күн бұрын
😂😂😂
@witosarlaw7 сағат бұрын
mantap sekalai motornya bang
@johnnoe96824 күн бұрын
Niiiiice!!!!
@RadFactoryGav4 күн бұрын
Thank you!
@michaeldrum87003 күн бұрын
Call it a Yamamu
@The.Rad.Factory3 күн бұрын
😂 I’ve been calling it the TemuR 125
@nofgood4live3 сағат бұрын
22:23 thats why i got my rav4 2004
@kevinkev15304 күн бұрын
👍🏾👍🏾
@RadFactoryGav4 күн бұрын
Thanks 🤘
@kareemhill13182 күн бұрын
The things you can do at home
@jackskeleton953 күн бұрын
you can tell they don't know how to adjust that carb
@The.Rad.Factory3 күн бұрын
Yes 😊
@gabbrobib59695 сағат бұрын
13:36 DOG
@clutchedoutphantom3 күн бұрын
Why not just attempt to fix the Yamaha motor it's not rocket science
@89HondaCR500R3 күн бұрын
tiny temu turbo it
@The.Rad.Factory3 күн бұрын
Coming soon 🤫
@briandstephmoore49103 күн бұрын
L Temu
@gormanspacemarine3 күн бұрын
Cut down on the Bro and Dude stuff, its kinda childish.