WILL $600 FIX THE LEXUS???

[@IamJZumba]

That cold stone has some bomb ass ice cream congratulations on the new shop 💯

[@jayyxdoppe5217]

Alexus

[@newjersey8636]

Marsh the world 🌎

[@HectorMateo-l6l]

Key points about P0101: Meaning: This code signifies that the MAF sensor is reading air flow values outside of the expected range, meaning it might be dirty, faulty, or damaged.

[@shaytovensdetail]

Happy new years bro

[@HectorMateo-l6l]

Where to look: EGR valve: Check for carbon buildup on the EGR valve, which can hinder its operation. EGR solenoid: Inspect the wiring and connections to the EGR solenoid for damage or corrosion. Vacuum lines: Look for leaks in the vacuum lines leading to the EGR valve.

[@HectorMateo-l6l]

Important note: While you can visually inspect the components, proper diagnosis of a P0403 code often requires using a diagnostic scanner to check the EGR system operation and identify the specific issue within the circuit.

[@tevinamnotte6482]

i always love the marsh talk at the end of your videos it's one of my favorite's parts of every video!! can't wait to see the finish work and where this garage takes you best of luck in the new year my dude keep it up

[@HectorMateo-l6l]

Check for leaks: Inspect the intake system for any vacuum leaks Check the air filter: Ensure the air filter is clean and not excessively clogged

[@HectorMateo-l6l]

Inspect wiring: Check for any visible damage to the wiring connected to the MAF sensor.

[@HectorMateo-l6l]

Possible causes of P0403: Faulty EGR valve, Damaged EGR solenoid, Open or short circuit in the EGR control circuit wiring, Leaky EGR vacuum hose, and Carbon buildup within the EGR passage.

[@HectorMateo-l6l]

Key points about P0403: What it means: This code signifies a malfunction in the electrical circuit that controls the EGR valve, which is responsible for recirculating exhaust gases back into the engine to reduce emissions

[@HectorMateo-l6l]

usually located in the intake air duct, positioned between the air filter and the engine intake manifold;

[@corey9763]

lol why is always the MAF for every single car

[@heyitsbryce]

10000% your capacitors in your ecu. Same issue with my old 400

[@HectorMateo-l6l]

What to do when you see P0101: Check the MAF sensor: Visually inspect for dirt or damage. If dirty, carefully clean it with a MAF sensor cleaner following manufacturer instructions.

[@alexdroiid2214]

Happy new year 🎄 nice built

[@EditsbyEasy]

Happy New Year bro, appreciate you putting out content, cheers to more success 🍻

[@HectorMateo-l6l]

Key points about P0100: Meaning: This code indicates a malfunction within the MAF sensor circuit, meaning the engine control module is detecting a problem with how the sensor is measuring the amount of air entering the engine.

[@HectorMateo-l6l]

P0101 ndicates a problem with the Mass Airflow Sensor (MAF sensor), meaning the sensor is likely dirty, faulty, or

[@HectorMateo-l6l]

meaning the engine control module is detecting an issue with how much air is entering the engine,

[@HectorMateo-l6l]

What to do: Access the MAF sensor: Locate the MAF sensor in the intake air duct. Clean the sensor: Carefully clean the MAF sensor with a MAF sensor cleaner, following the manufacturer's instructions.

[@HectorMateo-l6l]

meaning the engine control module is detecting an issue with how the EGR valve is operating,

[@LegacyOW2]

yo marsh, i have 3 1uz's I can almost guarantee you its your ecu capacitors homie, keep your head up and resolder that n get outside!

[@mostlyinept]

I was thinking it was an ECU issue as well once he said he couldn't use the scanner. Gotta love old cars!

[@LegacyOW2]

@mostlyinept definitely his capacitors no doubt.

[@Jay2rawwww]

Yea ecu

[@Trippieraff]

yup i had to do this on my 93 ls

[@HectorMateo-l6l]

Replace the sensor: If cleaning and inspecting the wiring doesn't resolve the issue, you may need to replace the MAF sensor.

[@HectorMateo-l6l]

damaged wiring, or a faulty connection within the circuit

[@HectorMateo-l6l]

The P0100 code is a diagnostic trouble code that indicates a problem with the mass airflow (MAF) sensor or circuit in a vehicle:

[@HectorMateo-l6l]

P0403 indicates a malfunction in the Exhaust Gas Recirculation (EGR) system's control circui

[@HectorMateo-l6l]

potentially due to a faulty valve, clogged passages, or electrical problems within the EGR circuit itself.

[@HectorMateo-l6l]

meaning the sensor is likely dirty, faulty, or sending incorrect readings about the amount of air entering the engine,

[@HectorMateo-l6l]

Replace the MAF sensor: If cleaning doesn't resolve the issue, the MAF sensor may need to be replaced

[@HectorMateo-l6l]

this is where you should look to diagnose the problem causing the code.

[@lobe562]

Marsh built tv while I wait for my girl to get off work not a bad way to kill 30 mins

[@HectorMateo-l6l]

which can affect performance and fuel efficiency.

[@born2die10001]

Gotta order arms from you I got a 7thgen accord that needs the floor lol love the vids and been a og follower

[@HectorMateo-l6l]

Potential causes: Dirty MAF sensor Damaged wiring to the MAF sensor Faulty MAF sensor Issues with the air intake system

[@HectorMateo-l6l]

likely caused by a faulty MAF sensor itself, dirty sensor,

[@HectorMateo-l6l]

Common causes: Dirty MAF sensor Damaged MAF sensor wiring Vacuum leaks near the intake manifold Faulty air filter

[@K.saucy_]

Great intro my brother! Need to collab one day💪🏽

[@Wykednick]

I skimmed thru the video, did you smoke test the car?…..

[@Jj-dz3qh]

Ecu I had a Lexus

[@unreleasedmusic399]

First comment