Will High Pressure Washing REALLY Clean Your DIRTY TRUCK?

Рет қаралды 173,062

Күн бұрын

Пікірлер: 53

@LuizFernando-kk4fv Ай бұрын

I find it strange that foreigners like to wash from the bottom up. Then when they wash from the top, the dirt falls down where it was already cleaned. Here in Brazil we wash from the top down so the dirt doesn't fall back down where it was already cleaned (Use Google Translate to write this)

@clarifaco Ай бұрын

You are the foreigner 😂😂😂

@helmutwernerkrebs5878 14 күн бұрын

The explanation for this is simple. The main dirt is in the lower area (the chassis) of the truck. Therefore, cleaning is carried out in 4 steps. Firstly, wet the entire vehicle. Secondly, clean the lower area intensively, including stubborn areas by hand with a brush or broom. Thirdly, clean the upper area. Fourthly, rinse everything again. (Plus fifthly) Each washing, especially high pressure washing, removes all combinations of dirt and oil. But moving or turning parts need clear oiling or grease lubrication. So the entire truck has to be re-lubricated after each washing. Do it yourself or have it done in a workshop. (Used Google Translate to answer this)

@LuizFernando-kk4fv 14 күн бұрын

@@helmutwernerkrebs5878 Here in Brazil, trucks are washed from top to bottom and they come out very clean. It simply doesn't make sense to wash the bottom and then the top so that the dirt from the top falls down where it was already cleaned. That's rework. Time is money. The rule of least effort. The truck will be clean one way or another, but your method is more work and takes more time. Here in Brazil, truck lubrication is done at gas stations. I wish you all the best...

@shereemorgan1430 7 күн бұрын

Double the work!

@Troy-gy5uu Ай бұрын

Bottom to top high pressure is needed to make sure all areas are hit. A thorough rinsing will go after. You can't do an initial high pressure cleaning from top to bottom, because the rinse water wil clear LOOSE soil and leave a "clean enough" appearance fooling you into skipping over areas. What is left behind is a faint layer of dirt that can only be cleaned with high pressure. When it dries your end product will look horrible. This also increases "dwell time" of cleaning chemicals, giving them time to break up the dirt, rather than washing it all away at once.

@paullacerda4459 17 күн бұрын

😂😂😂😂 you really don't know what your talking about! Leave this to the real professionals

@cherylmarquez2645 21 күн бұрын

From the US, my son is a truck driver & he told me how much it cost to get his truck & trailer washed. I thought it was expensive but after seeing this I can see why it costs what it does.

@79noel Ай бұрын

The reason for washing from the bottom up is simple. The chemicals used to clean equipment break up the dirt and loosen it from the paint surface. So if you wash from the top down after applying the chemical, you tube away the chemical. And therfore the high pressure won't be able to take off the dirt. So you start from the bottom and go up. This will ensure that the duty will stay loose and the high pressure will take it off. If you have done this for a living, the chemical makers will state this on their products.

@robertreisner6119 14 күн бұрын

I use a commerical steam cleaner, soap and final wash with a commercial pressurized water cleaner.

@jodycarter2271 17 күн бұрын

Yes sir now that's how you clean a truck 👍👍👍👍

@perbhjlund1765 Ай бұрын

What does it mean if it is washed up or down? Isn't it more interesting to know about the waste that is washed off, where it ends up. Does it end up in an oil separator, or does it just run into the sewer or onto the site

@thomasreyes2857 Ай бұрын

If you think about it basically you're using twice as much water as as you really need to that doesn't make any sense😂😂😂😂

@clarifaco Ай бұрын

@@thomasreyes2857I think he never washed a single car in his entire life 😂😂😂

@dongordon4464 12 күн бұрын

now I know why to wash from bottom up

@robreuler144 14 күн бұрын

Smart people was from top to bottom.

@shereemorgan1430 7 күн бұрын

You need a foam cannon, saves time, and you don't have to work so hard! Amazon sells them!

@MikeeonYouTube4 19 күн бұрын

Why not start @the top and work down?😜😜😜😜

@tugaroocrab 17 күн бұрын

How about a cattle stock truck?

@helmutwernerkrebs5878 14 күн бұрын

#Note Each washing, especially high pressure washing, removes all combinations of dirt and oil. But moving or turning parts need clear oiling or grease lubrication. So the entire truck has to be re-lubricated after each washing. Do it yourself or have it done in a workshop.

@helmutwernerkrebs5878 14 күн бұрын

This goes for Cars as well - example the door mechanics.

@jakemorrison482 27 күн бұрын

Top down.. did this for 6 months and pulled me shoulder out doing a stained asf curtain side.. high pressure water gets the top layer of but leaves streaks of dirt.. straight soap, not concentrated. One section at a time.. otherwise it dries up... yeah takes forever but that's the way to get it white, unless the tanks pitted from emulsion black shit being on too long and causing hairline cracks underneath near the King nipple. And check the aluminium welds Try doing emultion tankers ahh.. them gantrys

@camsmith7651 Ай бұрын

Who washes a vehicle from bottom to top?

@FGMR98 Ай бұрын

I do even under the wheel arches

@isabellebesancon Ай бұрын

I think it's to make sure every inch is pressure washed and not half washed by the fallen water. This way you keep seeing the dirt all the way up. A final rincing is necessary though.

@IanZuczuski Ай бұрын

Bottom to top wow they must be stupid cause all the dirt goes right over your clean area

@IsoPreP089 8 күн бұрын

It allows you to see what hasn’t been washed, if you start at the top the water running down the truck could hide dirt!!!

@marcuslamb713 Ай бұрын

I want that job

@ArsalanSattar-y6v 17 күн бұрын

Compresed modulated off and on filer . Silicaceous.

@thomasreyes2857 Ай бұрын

Let me see let me start from the bottom up. That should work and I'll save some water that way😮😢😂

@EDGARDINGRAM Ай бұрын

they must get paid hourly??? lol

@bouli3576 12 күн бұрын

Your intro : it's NOT a Scania, it's a Mercedes 1843 ! ! ! !

@ArsalanSattar-y6v 17 күн бұрын

❤❤❤❤❤

@Cwell4267 Ай бұрын

I noticed the same.

@user-pd2gu6li2n Ай бұрын

u r supposed to go from the top down.

@brianhume4743 Ай бұрын

No because you are rinsing off the cleaning solution if you wash from the top down over

@BCentury200054 28 күн бұрын

Trasporting??? 😂 TRANSPORTING!

@julieannfogarty5756 23 күн бұрын

It shouldn't matter if you wash it top or bottom it's getting clean

@inderdaad-le3uy 6 күн бұрын

Scratless piece of junk, lol and you clean from bottom to top that cracked me up!🤣🤣🤣

@L1berty1776 19 күн бұрын

Its like $60 for a truck wash

@lauriesbella1252 20 күн бұрын

Why in the world would you start at the bottom? Start at the highest point, working your way down, and let gravity help you to dislodge and remove caked on petrochemicals! This method makes no sense, as you'll have to constantly re-wash parts you've already cleaned.

@jef_fyba5559 25 күн бұрын

Too little water, weak pressure washing.

@paullacerda4459 17 күн бұрын

Irritating watching this! You can tell he's never washed anything in his life! TOP TO BOTTOM!

@fredthomas1953 27 күн бұрын

Not effective

@GraduatedIn 21 күн бұрын

Asphalt oil is notoriously unforgiving when it comes to cleaning a paint or metal surface. Often requires multiple applications of citrus oil, heat, or scraping to get the thick layers off. Especially tack

@stephaniehamilton6217 8 күн бұрын

More effective than your comment!