Will it Run?!? 1951 Ford F4 Barn Find! Abandoned for 50 Years! Grain Truck Revival!

This 1951 Ford F4 came from the same estate as the infamous Snootch Rocket, check out that video if you haven't! As near as we can tell it was last used regularly in the early 1970s but it appears as the previous owner may have had it running 20 years ago. Let's see if we can't get this old Ford Flathead running once again! If you're interested in this truck as is you can own it for the low, low price of only $2,000 in the condition as shown in this video. As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske-repair...
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things if you wish:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $36 shipped
SS5 0.625" wide long handle $29 shipped
SS5s 0.625" wide short handle $27 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Rubber tool mats: amzn.to/34FEw6R
Cyclops shop light: amzn.to/3oKaRAu
Ultrasonic Cleaner 10L: amzn.to/32fwikN
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#fordflathead #fordtrucks #mortskerepair #51ford #fordgraintruck #graintruck #dumptruck #flathead #flatheadV8 #V8 #fordf1 #fordf4 #holleycarburetor #revival #rustfree #manualtransmission #hamb #dailydriver #restoration #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #hackmechanic #brakes #smallblock #steelies #dually #flatbed #barnfind #abandonedcar #bodywork #chevrolet #bondo #vise #dually #v8 #mercflathead #hitch #abandonedcar #junkyardcar #junkyard #junkyarddog #duffdog #starterrepair #electrical #towmirrors #wiring #diywiring #diyrepairs #tuneup #transformation #budgetbuild #budget #DIY #dailydriver #starter #points #pointsignition #carburetorrebuild #ignition #muffler #towtruck #servicetruck #hotrod #ratrod #stuckvalve

[@PuddinsFabShop]

Jealous of the skid steer, Ill finally admit, slightly better then the towrolla!

[@MortskeRepair]

You heard it here first folks!!!

[@darrenw2803]

lmao im kinda partial to towrolla, but the skid steer does look kinda cute too 🤣🤣

[@rkelsey3341]

And those Bobcats are made in the US of A. I use the heck out of mine!

[@tonyg3573]

Nah. The Towrolla is the bomb!

[@wgrillojr]

@@MortskeRepair 🦻 (Ear w/ hearing aid)

[@johndewey6829]

that's the most rust free vehicle I've ever seen on your videos. something to be said for barn finds

[@MortskeRepair]

Grain trucks are nice cuz they usually got limited travel time in the winters.

[@barbershoppodcast]

I watch a lot of these - these... old car thingy videos... and I want you to know I really appreciate what you do bud, far more than just a lot of really good advice and life lessons wrapped inside rusty brake lines, but also the wry humor and deep shallowness or shallow depth of the human experience. Funny, irreverent, true to yourself - you're actually a great spirit boost for all of us riding out the crazy wicked backward phony timeline we have all been stuck in for years now..... How did you survive the darkest of times? I watched Duff and Mortske fix stuff and make me laugh - a lot. Cheers from Hamilton, ON

[@MortskeRepair]

Much appreciated for the kind words!

[@laurensfundaytwl]

I'd like to further this statement. In December of 2020 I entered a recovery program. I had an alcohol and drug problem. I'd been served divorce papers and had lost my second job in six months. As I labored to regain my sobriety, I knew I could count on this channel to post a video every Monday morning. It gave me something to look forward to. Believe me when I tell you, it was a hard recovery and sometimes it still is. But as I continue on in my sobriety, I know I still got ol Mortske Repair to look forward to every Monday at about 8am. Thank you Mortske and Duff.

[@wingdwolf56]

I’m not sure if I’ll get the truck but I sure want those matchbooks. Recipes for almost the whole week! Well, except that fish thing

[@rantsfromtheroad2055]

Quit stroking your ego and pin Dwayne’s comments.

[@patrickmoodabe9728]

@@MortskeRepair this guy sounds far too cleverer. You know. With the words & stuff. I think he might be Duff. In disguise. 😂. Nope. Just one of the finest & most erudite reviews of your channel that we all wish we could have composed. 👍👍

[@BrodieBr0]

Love how you show off all the paperwork and history of your rigs Mort. They're all time capsules and survivors from their time era.

[@MortskeRepair]

Thats the best part!

[@robertvance1873]

I agree, it's cool to look back at the history of a vehicle and sometimes the previous owner 👍

[@MortskeRepair]

@@robertvance1873 if only they could talk!

[@robertvance1873]

@@MortskeRepair that would be awesome. 👍

[@freedomdog77]

I'm sorry but Duff is the best dog ever. Just so happy at the slightest action. He just makes me smile! Great video, you find some great vehicles thanks for taking the effort to share the adventure.

[@pokey999991]

I watch to see Duff and Greta! Lol, how dare you! Lol

[@letsdothis9063]

He's a good boy! Good dogs make for a good life.

[@stevenlatham4397]

That really is a beautiful old truck. The paperwork in the glove box was interesting and a true trip back into history.

[@leonhart2452]

The only issue the 12 volt battery will give you is the radio. It won't like the 12 volts. Light bulbs can be changed. Swapping the 6 volt generator and regulator is not hard to do. The starter will get a bit hotter if it cranks a bit too long, but with the 12volts spinning the engine over faster will start the engine quicker. Swapping the coil for 12 volt coil or adding a ballast resistor in the power feed to the coil. I'm sure Mortske knows all these things and a few I missed. Just wanted to say this so others might learn.

[@MortskeRepair]

Yup!

[@tomparkin1551]

Woooo hooooooo!! 14:00 UK time on a Monday is the best Nice Juan Morts. Thanks again mate

[@502days]

I don't mind so it don't matter,nice thought of him though hey 😉

[@jeffrykopis5468]

2:30 That's in GREAT shape for an original (except the paint) 72 yr old truck! Thank God for barns!

[@MortskeRepair]

Yeah, not bad

[@larrygcrews7971]

Lost my dog last Sun we would always watch you and duff dog every Mon..I'd say duff dogs on and she'd run up and jump in my lap and we'd watch you guys. So I got me a new sidekick and I think Duff dog has got em another fan thanks for the awesome videos and keeping it real....

[@NoWr2Run]

Having a dog will BLESS YOU with the happiest days of your life & unfortunately one of the worst. I'm VERY VERY SORRY ABOUT YOUR DOG, " DAMN IT HURTS SO BAD " but I'm so happy you got another sidekick. There's NOTHING & I MEAN NOTHING LIKE THE UNCONDITIONAL LOVE OF A DOG. AGAIN I'M SORRY FOR YOUR LOSS, OK IT'S GETTING MISTY IN HERE, SOMETHING IN MY EYES.

[@larrygcrews7971]

Thank you so much it's very hard but I'll keep watching Mortske and Duff dog every Mon thinking of the good times we had watching these guys...

[@MortskeRepair]

Sorry to hear that Larry.

[@larrygcrews7971]

@@MortskeRepair thank you !!!

[@campbecw]

Flathead, Mortske flick, OJ glove, and a starter. It’s a classic Mortske episode.

[@MortskeRepair]

All of em!

[@HackeryX]

You know your Monday gets a whole lot gooder when mortske upload

[@jeffrykopis5468]

Hi Mort. About 7 yrs ago I tried to build a rat rod. Started with 2 rusty, gutted, nasty '50 F-1 rollers. Took parts of both roofs to make one cab with a SIX INCH CHOP! And my 5'11 frame and big belly still fit comfortably on the factory seat, behind the factory wheel! Coolest lawn decoration you ever saw! 😂

[@MortskeRepair]

Nice!

[@paralyse78]

That thing is super super nice for its age, looks dang near 100% original interior. Looks like it even had a radio! Put in a few days of wrenching on the clutch (maybe not so bad of a job) and the brakes (definitely a bad job), carb kit, points & condenser. The way it runs already you can probably just get a modern 8 volt battery and it will be fine. Throw a bunch of horse blankets on those crunchy seats, pressure wash it, and brillo the glass. I know you're selling this one but man, Red Ed is a damn nice rig, especially since it doesnt have 50 years of farm engineering on it, except maybe that starter "adjustment."

[@grantkoeller8911]

OMG!!!!! That is a sweet Hamms bottle opener!!!

[@TheHandyHam73]

Best will it run shows anywhere, Thanks Mortske!

[@MortskeRepair]

Thanks for the kind words!

[@NoWr2Run]

I AGREE, He is so honest also about whats wrong with the vehicles he sells, THAT IS VERY VERY RARE, ESPECIALLY IN TODAY'S " KLOWN WORLD ".

[@Hobodeluxe960]

Aww I needed some Duff dog in my life this morning.

[@RearEngineShop]

I love the look of these old trucks! 👍

[@Devilofaguy]

Heya Mr Mortske and Duff

[@jeffrykopis5468]

You're darned knowledgeable about all kinds of ancient machinery, Mort. I'm impressed.

[@maddoxlogging2303]

He’s good but have you ever really sat down, watched and listened to the Duff Dog? He’s a very wise, old soul with a desire to learn, discover and unearth creatures of all kinds from today or a half century in the past, dead or alive, who inhabit Mortske’s yard ornaments 😆

[@MortskeRepair]

Duff mostly knows dead things

[@duane1003]

@@MortskeRepair duff is the mouse whisperer

[@jeffrykopis5468]

@@maddoxlogging2303 He is also a master stench identifier, a true Ninja.

[@garydority9754]

You certainly couldn't let today's cars sit that long and expect them to start as easily as this one did. They truly built things to last back in the day!! Good to see another one saved. Glad you didn't have to adjust any valves on this either. But you did get to pull the starter. Duff is liking the old-style bench seat in this model. Thanks as always for keeping us entertained. Waiting till next week.

[@TestECull]

I doubt you could get one to start AT ALL, nevermind this easily. I speak from first-hand experience when I say just a year long hibernation is enough to totally destroy a modern engine with its razor blade thin low-tension piston rings. That happened to the 4.6 V8 in my '99 Crown Vic P71. I parked it to save up for new injectors in running order, but when I got the new injectors in it and took it for a test drive it burned 2-3 quarts of oil in just a quarter of a mile while running on seven and ejecting the dipstick from the tube. Meanwhile, Mortske has resurrected a flathead V8 that was so badly stuck he had to beat the everloving fuck out of the piston DIRECTLY while scorching it to hell and back to get it freed off; when that engine started it only smoked for the time it took to burn off the oil in the cylinders. Hit on all 8. Sounded mean. Part of why I'm gunnin' for a flathead myself. Trade my 14 Challenger for a Ford sedan with that engine in it.

[@rubenbraekman4515]

Yeah, things were made to be fixed by a farmer with a hammer and some bailing wire back then 😂

[@davidmcginnis2075]

Good job mort the savior of old antiques! and super Duff! The lead Foreman.

[@stephensaasen8589]

We were grain farmers in Eastern Washington in the 1980's and 1990's. The elevator we hauled to still had the old overhead truck lift for those trucks that didn't have a hoist back in the day. It could still operate. It had wheel cradles you drove the front wheels onto. Nobody was allowed in the truck during operation. Driver set the brake, put it in low gear, turn off engine and the overhead lift did the rest. The elevator operator said they kept it operable in case a truck came in that the hoist broke down so they could still dump the truck. That Ford is a nice piece of history. Hope someone wants the whole thing.

[@charleykeenan6171]

Brings back fond memories of working on these beauties when we lived on the farm back in the mid 80's. As always, another quality episode! Thanks to you and Chin for all the hard work!

[@MortskeRepair]

Our pleasure!

[@davidanderson2393]

Wow the old flatty came around pretty good, no smoke or strange noises, been quite awhile since you did any stuck valve beating scenes. Old Duff really digs those old Ford trucks, he looks right at home hanging out on the passenger side of the cab.

[@stevendinapoli1239]

U have one of the best channels on Utube hands down in my opinion! Thanks for sharing 😎👍

[@MortskeRepair]

Wow, thanks!

[@stuartfletcher2378]

That Ford (fix or repair daily) belongs be in a museum , It has a few issues but DANG!! the lack of rust and real 25 year old tires have to count for three out of five stars. I laughed my self to tears , until it started up, no stuck valves and the clutch stuck to the flywheel, I could go all night about that truck ( I have a soft spot in my heart for 51's. A big thank you for your humor and patience...Stu in Canada........

[@MortskeRepair]

Our pleasure Stu!

[@johncatalano7185]

Hey Mortske: Nice '51 F4 (Found On the Road Dead) grain rig you found there... (Looks like the classic Sanford and Son truck from the series) and it looked like it didn't take much to get it running again and it looked very well preserved... Looks like another Duff approved big rig!!! From the home of PB Blaster.... Cleveland, Ohio

[@allenbeaulieu7077]

Cool old truck Mortske! She runs!! As always, great video. Big Al.

[@Hugofreddie]

Funny , that tank brings back memories of a one gallon Castrol oil can , tied on the back with the fuel pipe braized on the bottom and a gravity feed. Lovely truck

[@saulgoodman3858]

I love this video because i have a 1951 Ford Mercury M1 which has been passed down through our family since new! We took it out and restored it back to its former glory a few years back, best thing we ever did. I sure love to hear that flat head 8 purr.

[@MortskeRepair]

Right on!

[@jrayholland7654]

Damn morstske I've seen all of your shows ,but I don't know how I missed this episode. That's a cool old truck thanks brother man !!!

[@michaelgriffin7717]

Love the companionship of the Duff Dog hes a real assett to your show he seem to give you energy

[@baconator_c10]

Just wanted to say this is my dog & I’s favorite channel. She digs Duff.

[@MortskeRepair]

Awesome

[@richardbenson4048]

My family on MOM's side had a trucking co. Hauled milk and later beer. They had the old makes of diesels such as Diamond Rio, Mack, International, etc. They for some reason didn't like Fords. But there was one with a flat head engine that sat parked most of the time. When one of the favorite trucks broke down or needed service guess which truck came to the rescue. Yep, The Dually Ford with the Flat Head that never failed. It pulled every thing the others could and as far as I remember even without it's proper maintenance was there to perform the rescue. Thanks for reviving at lot of good memories.

[@MortskeRepair]

Awesome!

[@patrickmoodabe9728]

Hey Duff. Your hooman is quite good at taking your instructions. To get those ‘go for a ride’ machines working for you. 🐾🐾👏👏🤦‍♂️🤦‍♂️🤣🤣

[@earnestmontgomery3796]

I never have a case of the Mondays anymore. First you, then that Puddin guy that you told me about! Thanks for what you do!

[@MortskeRepair]

Glad to help

[@tjakr3869]

Opening shot with Duff is the best.

[@lakewarpath]

I had a 51 3/4 ton flatbed back in the late 70s. Red just like this one. Flathead V8s are sweet engines.

[@billyhord4508]

Finally a flathead with working valves. Ed had an answer for a sticky bendix.

[@dr.leonardhofstadtersavage6413]

that is awesome to see an old 1951 Ford truck, and it runs.

[@DavidSmith-fs4nt]

Love the old Ford. My Dad worked on many of these old trucks. He'd actually sit inside the engine compartment rather than pull the motor to work on them. Great memories from the 50s. I hope it sells as is. I'd hate to see you part it out. It's a solid vehicle. A true barn find!

[@DangerousSportsForSeniors]

That bending cover was epic. You can smell the frustration. Thanks for sharing

[@frankm8533]

That's a sweet ride Morstake the Starter Jedi strikes again

[@BasedBidoof]

Cool relics in the glove box. I love the look of this truck

[@michaelguinn5736]

Hey Mortske!!! Now we're talking!! I like them old Ford trucks...my guess is 1951-52....

[@wgrillojr]

Thanks Mort! Thoroughly enjoyed the show. Clickin over to Puddin's will-it-run episode.

[@CountryBoyGasGarage]

Heck Yeah! 🔥 🤘 Another Great One Mortske! 👍

[@carlwilliamsaxton2146]

You got an old Hamm Sammich opener I'm stoked to see

[@tom-ehill2713]

Love old trucks!! It's more of a blast driving them😬

[@jeffkelly636]

Great truck - they sure don't make 'em like they used to, anymore. It's great to see Duff smiling in the Duff cam, he's up for all your test drives.

[@garysoykin2783]

That was pretty fun working on Mr. red

[@PuddinsFabShop]

I showed up one day at dads and he had left a jumper wire on the 6v coil of a 51 chevy i had. The coil had exploded and was on fire. I walked in his house and he was sitting there eating a sandwhich clueless. I told him and i believe he said " shit, I just had the damn thing running" I had forgot about that until watching this 😂

[@MortskeRepair]

Good times at the Jimmy Warner Ranch!

[@Gordonseries385]

👍 HOUSTON, WE HAVE IGNITION! That starter, you are a magnet for that stuff just lmao. Swing it radio, they sound great. The advertisement back when the flats first came out at the dealer..... Count the cylinder's Take care.

[@ryanhodges7101]

Ain’t nobody can open a hood better than Duffleupagus!

[@wyattpearl3086]

I can’t get over the sound of a flathead firing up, very nice indeed😂😂😂

[@davidcolesr.8628]

Nice, perfect Rain Day Treat. Good to see you Mortske & Duff

[@alxf66]

One of my favorite videos you've posted. That old rig just appeals to me too much to watch this only once.

[@MortskeRepair]

Wow, thanks!

[@gregpeter5472]

My dad used to take me to church in an one just like it. Used as his wrecker at his garage. Those WERE the days

[@Cam-sm1iz]

Two thumbs up Sir Mortske!! 👍

[@MortskeRepair]

Thanks Cam!

[@marcLeveille6056]

You show me an engine, Ford, GM or Mopar, I wouldn't be able to see the difference. All the same to me. Shows you how much I know. But I love your channel Mortske. Addicted.

[@MortskeRepair]

Thanks much Marc!

[@stevecole101sc]

The history in that glove box was a time capsule thank you for showing all that! Love your channel!!!!

[@MortskeRepair]

Thanks for watching!

[@ryanhodges7101]

That’s a sweet old Ferd! Dang!!

[@donnie2533]

Great video glad you posted keep them coming thanks

[@MortskeRepair]

Thanks, will do!

[@jeremywilliams4381]

52:53 the second ol Morticus hit puberty. So proud to watch him grow up.

[@j.b.a.124]

Another awesome video as always, Tom. You always makes us laugh & you are our # 1 KZbinr. Cheers from Jerome in Florida🍾

[@MortskeRepair]

Much appreciated Jerome!

[@gertraba4484]

Call. ICON. Sweet truck slammed with a modern f369 drivetrain. In it

[@hkeg80]

that's a sweet old truck

[@travisdrum6760]

My Grandpa had 2 of these on his farm and he used them for everything literally!! LOTS OF GREAT MEMORIES IN A TRUCK JUST LIKE THIS!

[@MortskeRepair]

Good times!

[@justinsane7128]

I worked at an elevator in the '70s that had a lift like that but sketchier, it had a frame you drove the front wheels on and then cables on the outside to a winch that you lifted the truck up with, that elevator did a lot of pinto beans and had all the bean cleaning shaking machines. We still used it not everybody had a hoist on their truck , or many of them were side dumps for sugar beets.

[@MortskeRepair]

Good times!

[@Isthatyoudermot]

What a great truck. Thanks for sharing. Duff appears to be the brains 🧠 of the operation 🤣

[@MortskeRepair]

You got that right!

[@richardnelson657]

Ha ha. Doing laps. Kept seeing the same scenery. A 67-72 style GMC, interesting! Hey, the glove box was a gold mine. LOL 👍

[@scottusmc666]

I think those matches are so freaking cool!

[@treborupp]

Love the sound of a Flatty thumping, good job. Amps and Volts boys n girls, lol

[@MortskeRepair]

You and me both!

[@renchjeep]

Budd wheels with the threaded-stud-nut thingy. Familiar with those from when I worked on trash trucks. Good times! LOL.

[@renchjeep]

Then there was that time I got a 1932 Ford BB (1 ton truck with dual rear wheels and metal rod brakes) running after it had sat for like 20 years. The engine had been rebuilt, no idea if it had ever run. Looked brand new. Anyway, I remember that thing having those Budd wheels as well. I drove it to the radiator/A/C shop down the alley from the shop I worked at and told them the A/C didn't work! LOL. While sitting on a plastic milk crate, of course. Ha! Wish I had pics from back then. Just finished watching your vid, and gotta say, AWESOME as always. Thanks for taking us on the ride, Mortske!

[@jimmyday9536]

We love the Duff Cam!

[@ryanhodges7101]

The drums on my ‘65 250 had flathead screws holding the drums to the rear hubs too. I was lucky enough to get them off with an impact driver. It made it a breeze to change the shoes. On some models of full floating rear ends a fella has to take the axle shafts, lock nuts, and dimpled washers off just to do a shoe replacement. Quite the mess. I’d say with a little bit of heat and a driver those screws will come out of there. Hopefully this helps. Ford was pretty ahead of their time with making brakes serviceable. Thank you for another cool vid!

[@MortskeRepair]

Our pleasure Ryan!

[@robertpimpo4698]

Eow can't beleivr that old thing fired up good job mortskee

[@markcole6475]

Very cool seeing old stuff like that….all the old literature is fun! My old 79 f350 had a parking pass from Disney land in 1980…..Let’s buy a new truck and go to Disney! 😊

[@MortskeRepair]

That’s awesome!

[@dannysublett1014]

Love the old big Fords. Also the literature in the glove box is gold to me.

[@sc_308]

It's Mortske Monday! Woo Hoo!! Great Job man 👍

[@MortskeRepair]

Thanks much!

[@iHap]

The opening scene of this video with you and Duff Dog was spectacular! Just like M-G-M with Leo the Lion. Mortske roars!

[@k-dawg3893]

Cool old truck Mr. Mortske! Good job gettin er running

[@MortskeRepair]

Thanks!

[@jmartin4030]

great video, last stuck clutch I had I started in first gear, held the clutch down and pushed the throttle on and off a couple of times ... all good cheers from OZ

[@rescueinoldraggedy7407]

its a solid cad , you can beat the dents out , stay safe buddy

[@donnixon3528]

Ya love when you work on old fords. Cheers

[@Rav_4_Guy]

That would make an awesome plow truck for you. Different bed “That’s Pretty Neat”

[@waynehardy6186]

Duff has his snout in everything you guys bring home. Happiest pup ever.

[@MortskeRepair]

He's something else.

[@puddleduckist]

cool ol grain truck, u always find the cool ol rigs Mortske! Runs pretty well for sittin so long. like the new shirt, will have to pick one up!

[@MortskeRepair]

Right on!

[@rssvss]

Thank you Duff, Mortske, Chin and Mojo these videos mean the world to me.

[@MortskeRepair]

Glad to hear it Ross!

[@bdcrews07]

My grandpa and grandma had leather hey holders with their names on theM. Leroy and Evelyn. Super cool to see that.

[@MortskeRepair]

Awesome! I dig that kind of stuff!

[@beerandpolitics5699]

love the new intro music, much cleaner sounding. keep up the good videos and tell duff he's a good boy for me!

[@MortskeRepair]

same as we've had for a long time

[@tmveronee]

Innovation make you different and sometimes better.

[@DanDan-yy8sf]

"Identifies as a hammer as well" Bah-ha-ha ! Good one Mortske ! 🔨🚗👨🔧🍺🐶

[@michaelgargone4480]

Awesome as always 👍

[@MortskeRepair]

Glad you enjoyed it!

[@djrand62]

I worked on the wheat harvest one summer when I was in college. We started in northern Texas and worked out way north as the wheat ripened. By the time I had to go back to school, we had worked our way clear up to South Dakota. I took grain into a few old grain elevators where they had a unique apparatus of unloading grain trucks that was first installed before trucks had hydraulic bed lifts. It was a cable lift. The cables had a cradle attached to the bottoms. The cradle held the front axle wheels of the truck. It then lifted the front of the truck to dump the grain out of the back. Scary!

[@MortskeRepair]

Good times!

[@jStrikesMechanical]

Good video. Duff was real good for this one too

[@curtischvac9488]

I dig that vevor jack!

[@MortskeRepair]

It's pretty handy!

[@markcummings2093]

Thanks for saving another old truck

[@MortskeRepair]

Our pleasure!

[@Doogie_Causey]

Been sitting in a barn along time, damn thing idled as soon as it started