Will it run? Will it start? Parked for 30+ years! 1935 ford

This 30s Ford is sitting on a Blazer frame, but she's ready to hit the road again. Wow do those HEI distributers have some shocking power!!! Watch to see if I can get this classic beauty running! ‪@treetop.garage‬ ‪@okspeedshop‬ ‪@highoktanegarage‬ ‪@WhiskeyDents‬ ‪@TheHomeWrencher_1776‬ ‪@1776_Garage‬ ‪@Tannerrebuilds‬ ‪@greezyzgurage‬ ‪@OutlawEdge‬ ‪@honestpeytonsspeedshop‬ ‪@HODGEPODGEDODGEGARAGE‬‪@JosephFranklin-bd4qv‬ ‪@ViceGripGarage‬‪@thedirtheadshed‬‪@TheHomeWrencher_1776‬

[@ClassicCarRevivals]

It really helps my channel out of you like and watch until the end! Thank you for helping out!

[@Bbbbad724]

Does that Louisville have a 391 in it? I ve been looking for a 391 FT awhile.

[@WhiskeyDents]

Congratulations! Great video for a great brother!

[@ClassicCarRevivals]

Thanks a bunch!

[@randyriggs5463]

Vice Grip garage is going through the same truck. His was a 35 Ford. Hope to see more content.

[@ClassicCarRevivals]

I like his truck

[@markstaudt3822]

Ditch the chevy frame and motor. A ford should be a ford!

[@ClassicCarRevivals]

👍

[@sasquatchsmith9980]

Someone else's headache, why torture yourself. Glad you like it. Good luck.

[@ClassicCarRevivals]

Someone’s gotta finish it!

[@brianfalls5038]

I know all about that human spark plug trick. I've zapped my self on more than a couple of occasions. LOL!!

[@ClassicCarRevivals]

Yep got my self a time or 27

[@joefromga5458]

Nothing like an HEI biting you to make you feel (and appreciate being) alive! You've earned a new sub, thanks for the vids.

[@ClassicCarRevivals]

Thank you ! I definitely don’t wanna do that again!

[@richdelelle9064]

I think it's a 1935 Ford. Look on the firewall drivers' side for a patten number plate. It might have the original VIN which would tell you the year. Ford has many sights with tons of info. Try Mac's, Van Pelt, Bob Drakes, Heinzman etc. They are all suppliers and some offer lots of tech info, Nice truck. Good luck. Rich

[@ClassicCarRevivals]

Thanks for the info!!

[@jwfinley7808]

I dont know what I'm talking about?? Sound good!

[@adrienfortin4411]

Keep up the content man. The chanel will blow up. Just keep going.

[@ClassicCarRevivals]

I definitely will! It’s ppl like you that keep me motivated

[@Mr.Higginbotham]

Hey bro, do what you think is best. I'm learning from many and you are one.

[@ClassicCarRevivals]

Thanks i appreciate it

[@kdsboosted4954]

Very cool 🤙 I just bought a pair of 36's a 5 window coupe and a pickup on an early 70's corvette frame

[@ClassicCarRevivals]

Nice

[@okspeedshop]

Great video man!!! Cool find. Looks like that spark plug incident was exhilarating 😂

[@ClassicCarRevivals]

Thanks

[@keneldred9030]

I’m with you, brother, as far as a Chevy being all Chevy, Ford being all Ford, etc! If it was me, I would remove the body from the Chevy frame, and mount it on a Ford frame, and build it right, with a 427 Thunderbird engine, a 5 speed manual transmission, and a 3.73 geared 12 bolt position rear! Keeping 35x10.5 15 inch tires and nice mag rims, and, dual exhaust with headers and glass packed mufflers, K&N intake system, &, NO COMPUTERS ALLOWED!! I ‘d like that! What about you?

[@ClassicCarRevivals]

I like the way you think

[@stevepeyton9073]

Derek Bieri is messing around with a 35 right now That is what you have

[@ClassicCarRevivals]

Yeah I seen that his truck is also pretty sweet

[@allanarndt3047]

Four wheel drive kinda fits that body style but making it a two wheel drive street rod would also be cool! I do like that body style tho,looks cool just sitting still & all the steel looks really good! Fitting a radiator might be a challenge? Looks way too cool to not be on the road. Great find!

[@ClassicCarRevivals]

I agree!

[@ClassicCarRevivals]

Radiator mite have to go in the back!

[@1776_Garage]

I think you could get the Titanic to start up. Lol

[@ClassicCarRevivals]

Challenge accepted!!

[@1776_Garage]

@@ClassicCarRevivals Lol

[@hickeyskustomresto]

What a beast! Just came over from Whisky Dents channel. Subscribed 👍

[@ClassicCarRevivals]

Thank you!

[@ce7618]

Well I watched all the adverts and the video twice hope that helps sir. All the best from 🇬🇧👍🏻

[@ClassicCarRevivals]

I really appreciate it ! Thank you!

[@GMCTIM]

Sweet great find nice ole truck ! 😁✌

[@ClassicCarRevivals]

Yep it’s pretty sweet

[@Tannerrebuilds]

That's one rust free truck

[@ClassicCarRevivals]

It’s nice

[@charlespark9592]

😊

[@ronaldcarmony3068]

I really like old trucks and cars those days of being on the road with them are pretty much history

[@ClassicCarRevivals]

With people like me were trying to save them

[@ronaldcarmony3068]

@@ClassicCarRevivals yea and I appreciate it too there are others I’m subscribed to that does the same

[@ClassicCarRevivals]

@@ronaldcarmony3068 I try to follow as many as I can

[@TheHomeWrencher_1776]

Great job up there Sparky😂 I’ll never forget, leaning across the metal tubing and grabbing hold of a wire of a 6AL woke me up. Did you know that your Nutsack is a good conductor of electricity?😂

[@ClassicCarRevivals]

I did not know that! I will have to be more careful now haha!!

[@honestpeytonsspeedshop]

That thing is sick

[@tellfile]

I'd name it *Jolean* . When you put the bed in, you could fix a little recessed door to get the fuel float out so you'd never have to go through the misery of dropping the tank.

[@ClassicCarRevivals]

Good idea!

[@highoktanegarage]

That’s one way to test spark… 🤣🤣

[@ClassicCarRevivals]

That’s for sure!

[@skipstein744]

A geat find and a Ford! Onward!

[@skipstein744]

Also, I would keep the Ford body on her and bring her back as a street cruiser.It's a great ride!

[@ClassicCarRevivals]

👍

[@HODGEPODGEDODGEGARAGE]

I think like you, the crown vic front end and explorer rear would be nice. Make a good cruiser 🔧🔩

[@ClassicCarRevivals]

Yep cv mite be a little wide for the fenders gonna pull a tape soon and find out

[@alkennedy1124]

50.000 hei is a ton , and you really feel it , lol thanks BigAl California.

[@ClassicCarRevivals]

Thanks for watching BigAl

[@petecunnien5368]

Very cool Truck I like the stance with the blazer chassis under it. I vote to leave it as is, but would also be very cool on a smaller frame lower to the ground maybe bags under it so many possibilities with those all of them are cool but not sure I’ve seen one that stands for, thanks for sharing your pain with us. Always fun to watch others get electrocuted great by the way just tripped upon your video here and I’m sold. I’ll watch more.

[@ClassicCarRevivals]

Thank you

[@1776_Garage]

Keep it all Ford

[@WhiskeyDents]

That things awesome

[@ClassicCarRevivals]

I agree

[@hickeyskustomresto]

I like the ford frame swap idea

[@Skylah-k1u]

Pretty badass looking looks mean what those rims and tires looks mean

[@johnlemaitre3612]

Sounds just like a Chevy! Golf ball in a five gallon can, well shaked!😂

[@ClassicCarRevivals]

😀

[@southernshooter]

Vicegrip garage has a good idea of using 2 cycle mix on a first start. He says to never use either on a first start after many years of not running.

[@ClassicCarRevivals]

Yep I feel the same way!!

[@MillCreekFabShop]

Really cool ole truck. If you want to make it to the parade you should leave it on the Chevy platform lol. I was electrocuted with 7,200 volts so I felt it when you got zapped.

[@ClassicCarRevivals]

Oh man I bet that hurt like hell

[@MillCreekFabShop]

@@ClassicCarRevivals it didn't feel good.

[@ClassicCarRevivals]

@@MillCreekFabShop I can’t even imagine

[@tyhogue8316]

Beefy old truck!👍

[@ClassicCarRevivals]

Oh yeah!!

[@gregallen4272]

Cool truck i remember one several years ago very similar to this 35 36 ford truck the original frame was hacked and was to badly done it was set on a blazer s 10 chassis. The truck is solid for the year i hope you use a 2 wheel drive original type chassis and make a nicer style street rod . I tried several times to buy the truck there are several ways to build and power your cool truck a 48 53 ford flathead is very cool but expensive the y block is also very cool but also expensive but the 289 302 is a very good very cheaper way to go a 331 stroker with a nice cam not to radical and 3 pedals in the floorboard is a lot of fun. Side note the 35 to 40 ford cars all types and trucks used the same frame the only minor difference was the truck center x bracket was a little heavy duty but still used the exact same mounting points. And if you use a flathead check into using a mustang 5 speed with a open drive shaft a explorder rear axle is 3.73 5 lug on 4.5 with and the 2 wheel drive with a arm front suspension is also a good fit and there are a very few 2 wheel drive explorer with factory 302 power all 302 explorer used p heads and fI and it is possible to use the explorer dash cut down and then use factory wires and Factory fuel injection and get 20 mpg no problems .lots of work but the crown vic is way way to wide and long the explorer 4 door frame is correct wide and very close on length the bed will have to stay shallow to clear gas tank and the higher rear frame rails but it will set low a 2 wheel drive ranger extra cab short wheel base is same wheelbase a 2 wheel drive single cab longbed is just a little bit to long but you get the idea. Thanks for sharing your cool truck and saving a old ride while giving younger guys and gals a little motivation to build them something that they to can be proud of self respect and self reliance go hand in hand thanks for reading if you made it this far

[@ClassicCarRevivals]

Thanks for the pointers if I end up buying the truck I will keep this in mind thanks

[@anthonynapier4668]

Nice,,I like this pickup ,,like it a lot ,,,,hey you didn't check the other 7 for spark 😃😅😅 👍 👍

[@ClassicCarRevivals]

Next time I will check all 8

[@helenaripley1896]

That’s what I suggested 😂

[@bobbuxton3637]

ford on a ford

[@ClassicCarRevivals]

Yep

[@juanbarturen2726]

It's an awesome truck. Looks a lot like a 34. But I don't know. I would just get it going and enjoy it.

[@ClassicCarRevivals]

Yep that’s the plan

[@juanbarturen2726]

@@ClassicCarRevivals awesome

[@christopherarmbruster6241]

Good stuff..chev motor is da way 2 go...got one it my old ford...its a no breaner ...

[@ClassicCarRevivals]

Sounds good!

[@blackbartbartholomew7122]

Dude I think the IPhone 7 was made a little before the truck was!

[@ClassicCarRevivals]

Yepper lol

[@rollonbc]

That sh_t hurts don’t it. Still remember when I was 14 and workin on my old Monte Carlo when I got it

[@ClassicCarRevivals]

I should’ve learned by now lol. Thanks for watching

[@zekecorder8226]

Leave it Chev and finish what someone started. Good job making it run.

[@ClassicCarRevivals]

👍

[@Francescawine]

I say its 1933 , slight slat in the grill and outboard headlights. 1938 headlghts in the fender.

[@ClassicCarRevivals]

Nice thanks

[@1776_Garage]

A shocking experience! Lol

[@ClassicCarRevivals]

It got me good

[@bryanguthrie-ej1fb]

I’ve caught my arm hair on fire reaching over a carb like that.

[@ClassicCarRevivals]

Same. I still didn’t learn haha

[@bryanguthrie-ej1fb]

@@ClassicCarRevivals 😂😂

[@Mr.Higginbotham]

Love it 😁👍🏼

[@ClassicCarRevivals]

Thank you

[@Bbbbad724]

That’s a nice ‘35

[@Bbbbad724]

It’s a 1935.

[@ClassicCarRevivals]

Thank you! The guy put a lot of work into it

[@Bbbbad724]

He fucked that one up. A 35 frame is great for a Mustang 2 front end with rack and pinion. And a 9 inch in the rear. 302 or SBC is good for that.

[@WhiskeyDents]

Shocking

[@okspeedshop]

I was shocked! Anyways… heading to bed I’m zapped.

[@WhiskeyDents]

@@okspeedshop time to recharge

[@treetop.garage]

Hell yeah brother

[@ClassicCarRevivals]

Oh yeah!

[@allenfenstermacher1429]

Keep it like that

[@ClassicCarRevivals]

It is pretty cool how it is

[@WhiskeyDents]

Love it

[@jwfinley7808]

37 Willys? I could tell by the grill.

[@ClassicCarRevivals]

35ish ford

[@lylejackson9410]

Vin # is on the top of the frame driver side about a foot back from the grill

[@ClassicCarRevivals]

Thanks I will look for it

[@allanarndt3047]

Did you check crankcase oil?

[@ClassicCarRevivals]

Yes I did

[@craigbowley6783]

Ether is good for reviving an old diesel 👍

[@ClassicCarRevivals]

Yes

[@rogerclyde2720]

Find a 35 frame start over

[@ClassicCarRevivals]

I’ve been looking

[@pamboden1677]

She’s a beauty

[@ClassicCarRevivals]

Yep

[@craigbowley6783]

Is that a 4wd? If so give it a lift and enjoy it cause that is a very cool rig👍🇺🇲

[@ClassicCarRevivals]

I think I’m gonna!

[@thomasturco5870]

The rims are going to cut into the tire you need a 3-inch lift kit body lift kit 3 in

[@Skylah-k1u]

That's the name I'd call it that's the name I would give it bad ass Billy

[@ClassicCarRevivals]

Nice

[@1776_Garage]

My uncle got out of Vietnam because of mosquitoes

[@ClassicCarRevivals]

I don’t blame him those things suck

[@1776_Garage]

@@ClassicCarRevivals He got Malaria

[@OldChevy79]

Get it driving good

[@ClassicCarRevivals]

👍

[@adrienfortin4411]

Cool video

[@ClassicCarRevivals]

Thank you!!

[@matthewcox1122]

Even if it don't make the road it'll make one mean paddock basher

[@ClassicCarRevivals]

It would!

[@waltervinson5377]

Let it be

[@Skylah-k1u]

Name it badass Billy

[@Bbbbad724]

I d put it on a Ford frame. And let me know on the 391.

[@charlespark9592]

😊😊😊

[@bryanguthrie-ej1fb]

Gonna nickname ya sparky 😂

[@ClassicCarRevivals]

Ain’t that the truth

[@bryanguthrie-ej1fb]

@@ClassicCarRevivals I promise you’re not the only victim 🤣🤣

[@ClassicCarRevivals]

@@bryanguthrie-ej1fb I’m sure I will get zapped again

[@jwfinley7808]

37 grill?

[@ClassicCarRevivals]

Not sure

[@alanhickey7433]

35 or 36 , on the grill. Hoodsides are 35. We have three 36’s , one since 69

[@ClassicCarRevivals]

@@alanhickey7433 thank you

[@Bbbbad724]

It’s probably beating backwards.

[@davidrecker8596]

I not sure what year it is but I know it's older than 38

[@ClassicCarRevivals]

Awesome thx

[@Tannerrebuilds]

I agree with you take that Chevy motor out and take it off that frame and put it on a F100 frame and crown vic front end and explore rear end

[@gregallen4272]

Look for a 91 2 wheel drive explorer or mercury mountaineer the first series the later series are to big

[@ClassicCarRevivals]

Great idea

[@georgeanderson3754]

Not a 38. Earlier. Hood, side curtains and grill are wrong for 38. 38 had 85 hp flathead, mechanical breaks and crank out windshield.

[@ClassicCarRevivals]

Thanks

[@A35pickuptruck]

1935 I have one

[@ClassicCarRevivals]

That’s cool! Does the box look like yours? Someone said box mite be newer

[@petersauer9496]

Tires are 2 big?

[@ClassicCarRevivals]

Yep

[@keneldred9030]

That’s 12 bolt posi rear.(Oops! 🤪🤪🤫🤫)

[@craigbowley6783]

Why would you not oil the cylinders?

[@ClassicCarRevivals]

There was oil in my gas

[@donniepayton1460]

I am guessing maybe a 36 chevy

[@ClassicCarRevivals]

Thanks for tuning in!

[@jamesarnett4129]

Call me crazy but everything behind the cab is 1938 & up

[@ClassicCarRevivals]

I was wondering about that. Thanks

[@cristopherlove3865]

Leave it like it is and sell it to me!!!

[@ClassicCarRevivals]

👍

[@Bbbbad724]

That HEI will knock you on your bum.

[@ClassicCarRevivals]

It did 😄

[@lylejackson9410]

Has a 1935 hood and Grill

[@ClassicCarRevivals]

Nice

[@patrickhurst7842]

please get starter for ir plose

[@ClassicCarRevivals]

Yep

[@1776_Garage]

Here

[@ClassicCarRevivals]

Sweet

[@enyawnivlag1]

It's also not running on all it's cylinders!

[@ClassicCarRevivals]

Nope new plugs and wires will fix that I hope

[@chriscarter3071]

1935

[@ClassicCarRevivals]

Thanks

[@thomasturco5870]

Play lift kit 3 in rims are not going to work

[@troythomas1569]

Leave it as it is!!

[@ClassicCarRevivals]

I think I’m gonna! The original builder had a vision and I wanna respect that!

[@Tonymarony5113]

Ford mixed with chevy doesn't bother me. Someone used what they had

[@ClassicCarRevivals]

Yep and he did a good job

[@Tonymarony5113]

@ClassicCarRevivals It's hot rodding in its purest form. Use what you have and what your abilities allow. It may have been it's what he had, or it was about the right wheel base and track. Either way, it looks tough. Maybe just needs a little smaller tyres on it. So they fit in the fenders.

[@garycamara9955]

35/36 Ford truck. Get rid of the blazer frame.

[@ClassicCarRevivals]

I agree

[@NormanSwake]

Put it on a Ford chassis. Maybe a Ford bronco 70's? Ford stays on Ford

[@ClassicCarRevivals]

👍

[@markorr1874]

RADIATOR COWL LOOKS LIKE 34

[@ClassicCarRevivals]

Thanks

[@1776_Garage]

I didn't laugh when you got shocked. Much

[@ClassicCarRevivals]

Sure

[@bobrantz8570]

No 35 ford had an overhead valve engine.

[@ClassicCarRevivals]

Yep flatheads only