Will JB Weld Fix A Cracked Jeep Engine Block????? Project Peanut Part 1

Follow along in this two part video series to see if JB Weld can fix a crack in my engine block of my 1999 Jeep Cherokee XJ. This little project Jeep is called Peanut it has been a project for the last 4 years and 2 years ago I diagnosed Peanut with a cracked engine block. Lets see if we can fix it with JB Weld.
Check out part 2 and the test of J-B Weld!
• Will JB Weld Fix A Cra...
Please Like and Subscribe!!!!

[@nothingbutprojects8193]

I had a crack on the front gear cover of a 12.7 Detroit in a Freightliner. I got an estimate to fix it, $6k. Oh hell no! JB weld and some elbow grease, never leaked again in 400,000 miles! It's all about the prep, if you clean it real good, JB is indestructible.

[@theprojectchannel4434]

It truly is some awesome stuff!

[@lampajoo]

Good stuff.

[@theprojectchannel4434]

Thanks!

[@victorzammit5823]

Well done

[@theprojectchannel4434]

Thank you!

[@timnobody6947]

Hint: when you do a 2 part video, Name them the same, Just add 1/2 . Otherwise post people only see one video...

[@theprojectchannel4434]

Ok, thank you for the advice!

[@andrewagner2035]

Just interested to know how JB weld compares with Belzona 1111?

[@theprojectchannel4434]

This would be a great experiment if the JB weld fails to hold. Where would I find Belzona?

[@cadenbrown4861]

My 2002 300ex case is busted put it together with jb weld never leaked

[@traviswarwick350]

What kind/size drill bit did you use?

[@theprojectchannel4434]

I'm not sure what size and the specifics of the drill bit were but, I would match the drill bit size to the tap you would use. The tap would correspond in size the the bolt you want to use. I used a 1/4-20 bolt and tap. I think it is a number 1 size drill bit or anything between 0.1960" and 0.2070" in size for drill bit. Any high quality metal drill bit will work just fine use some sort of cutting oil and low speed.

[@jasonthomas1817]

i no why you drilled it but don't understand why u had to thread it since u wasn't going o stitch it back?? could u please enlighten me, unless its for the jb weld to grip better in the threads?.. ill be tiring this on my 3.0 mercruiser this summer? thank u

[@theprojectchannel4434]

I drilled and tapped it so the JB Weld would have something to bite into rather then a smooth hole.

[@jasonthomas1817]

it still holding? i had mine welded last summer put everything back in it new and got it running like new but be4 i put it back in the boat winter set in and i forgot to pull drain plugs and re-cracked it and cracked new spot now.. lol just my luck.. so i thought one last try i thought id JB it plus now the new spot is in the exhaust manifold have to do it also.. which JB should i buy for this project if u don't mind me asking? they r so many diff ones on the market..@@theprojectchannel4434

[@kennethpartlow7110]

How’s it holding up still?

[@theprojectchannel4434]

I still haven't had any issues with it since fixing it with JB weld.

[@_Sayvo_]

@@theprojectchannel4434what about now?

[@adtech247]

did it work? i have the exact same crack

[@theprojectchannel4434]

I am in the process of putting everything back together and filming. I should be able to test it out and have a video posted of it by Sunday.

[@adtech247]

@@theprojectchannel4434 cool what size bolts did you use?

[@theprojectchannel4434]

@@adtech247 I used a 1/4-20 set screw, but a bolt would work perfectly as well.

[@cyberwip]

Could the Columbia crew have safely returned with a tube of J.B. Weld? Could Chernobyl have been prevented with J.B. Weld? Inquiring minds want to know.

[@waynemurphy7394]

A little video advice , close up of your face is not a good idea .

[@theprojectchannel4434]

Ehh why not lol 🤣

[@markburden6912]

Can JB Weld fix your rotten camera work.

[@theprojectchannel4434]

I wish 🤣