Will the Range Rover Classic Even Start?

[@jonasmeissner]

IT LIVES!! Well done, Henrik!

[@henriksrestorations]

Yepp 😀 thanks! Are you watching KZbin during work hours? 😘

[@sesproul]

A friend and I here in Miami are doing the same sort of repairs on our RRCs these videos help a lot. Mine is 1990, his is 1995 - Thanks for the detailed videos of your step by step repairs. Good Luck with your trucks - looking good.

[@henriksrestorations]

Wow! I’m happy to hear that my videos can contribute with some guidance 🥹 just contact me if you have any questions and I’ll try to help as much as I can! Any instagram where you post your progress? Good luck to you as well!

[@lear60man]

Keep up the good work! I just 'finished' a 95 classic restoration and man....what a feeling to dive it around and see people smiling while I go down the road.

[@henriksrestorations]

Good for you :) I can imagine people turn there heads when youre driving pass them

[@josephhomen]

You always want to refill a oil filter. According to the Land Rover shop manual the proper procedure for oil change step 1) drain old oil. 2) refill oil sump with oil. 3) remove old oil filter. 4)Install new prefilled oil filter. Reason is if the pick up tube and the oil filter are both empty or the oil filter is removed, and the oil is removed from the sump, the oil will drain out of the oil pump and it will lose its prime.

[@henriksrestorations]

Thank you for your informative comment 🙏🏻 will do according to your procedure next time!

[@MikeLe-Mmon]

Nice one Henrik, well done. They like a drop of fuel. Looking forward to the next one.

[@henriksrestorations]

Thank you! Yes, seem to do the trick 😊👍🏼

[@mejselq]

Amazing work! And fantastic that you managed to bring the car back to life again!

[@henriksrestorations]

Thank you Johan! Yes, that feeling when it fired up 😍

[@davidblackburn6569]

am so pleased for you , it sounds good and looks good , you must repair the oil lines as blocking them off blows out the internal seals ,i have now bought a scissor lift as crawling under is getting to be hard work looking forward to the next tasks

[@henriksrestorations]

Thank you David! It was sure nice to hear the engine run. Yes, il that’s the plan. Get a new line for the oil cooler 😊👍🏼 I will keep posting as I progress!

[@TransformotionVR]

hello mate, we've just checked out your channel, great content!!! thanks for your suggestion with our range rover classic, we'll definitely check it out, good luck with the build...oh and we've just subscribed to your channel!

[@henriksrestorations]

Thank you! and Thank you for subscribing, hope you'll get the RRC running :) And also, remove and clean the stepper motor on the back side of the plenum!

[@PhilMurray-t2i]

Could I suggest you use high zddp oil for a rv8, valvoline vr1 20w50 is well regarded for flat tappet cams otherwise great work and good to see a classic being kept alive

[@henriksrestorations]

Thank you for your comment! Yes I should but they were a bit more expensive so I went with a cheap one for one and then, maybe we’ll have to another oil swap if the car will run for longer than 30 sec 😅 Cheers!

[@upscaleshack]

Americans are so obsessed with high zinc oil while the rest of the world says meh. My Series 3 Landy truly doesn't care what oil it gets. Any modern oil is 100% better than what was available in the 70s.

[@michaelmccann4706]

Great job, it runs. By the way did any ever tell you that you look like Magnum Pi?

[@henriksrestorations]

Thank you! It feels great, started it the other day and it runs very well right now. Haha someone have mentioned it before but I don’t know 🤣😅 but I’ll keep rocking the “stasch”

[@tonyb1184]

Came from Transformation's channel. Dropped a subscription. Good job getting the old girl running.

[@henriksrestorations]

Thank you so much 😊 they are doing a good job at their rangie 👍🏼

[@allenharris5128]

Make sure you have no leaks on the intake side

[@henriksrestorations]

Thanks, will take a look 😀

[@allenharris5128]

If the engine is hunting during idle its likely to be the butterfly in the injection system run some barium b12 put half in the tank and then put the other half straight through the injection unit at a high rpm but bear in mind it will smoke more than usual while it's working

[@henriksrestorations]

Thank you sir! do you mean the product linked below? How should I put it straight in the injection unit? www.berrymanproducts.com/products/gasoline/b-12-chemtool-carburetor-fuel-system-and-injector-cleaner/

[@allenharris6926]

Yes that's the stuff if you disconnect air intake at air filter box end and use the flexible hose that you remove from the filter box as a funnel tip it in a bit at a time but you will have to rev it while your adding the fluid or the engine will get bogged down and choke it's self out also make sure the flexible hose has no holes

[@billsinclair6515]

how does the brake cleaner go Henrik? phhhhhhhhhhhhhhttt ha ha man made my day

[@henriksrestorations]

😅

[@kejenkejen]

😂 So funny with the drainpan, stupid design, i have one myself and did the same Thing as you! 😉

[@henriksrestorations]

Haha sooo stupid 🤣 and so easy to forget!!