Will the Spec Single Mass Billet Steel Flywheel Hold Up? Chevy Cruze 1.8 Turbo Project (Unboxing).

The Spec single mass billet steel flywheel is in for the Chevy Cruze 1.8 turbo project is in! Will it hold up? Let's unbox it!
10% off code: MATTCHEVY
GGT3582 turbo link：bit.ly/3Cd8rzB
We're giving away a Maxpeedingrods GT3582 turbo to our viewers and subscribers! Giveaway starts March 4 12:00 AM CST and Ends April 4th 12:00 AM CST. Comment "GT35" to enter to win. No purchase necessary. Must be in the continuous 48 US states, and not open to family or friends.
Installing the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 1 - • Installing the $113 eB...
The eBay Turbo is Building BOOST!!! Chevy Cruze 1.8 Daily Driver Build - • The eBay Turbo is Buil...
PCV Issues we had - • Something Went WRONG w...
Making an equal length turbo manifold - • How to Make a DIY Turb...
Making a log style turbo manifold - • The DIY Turbo Manifold...
Custom Forged JE Pistons - • Custom Forged JE Pisto...
How to Install an Upgraded Fuel Pump - • How to Install a Repla...
Custom Camshafts for the 1.8 Cruze - • My Reground Camshafts ...
Upgraded Stage 5 Clutch and Aluminum Single Mass Flywheel - • Single Mass Aluminum F...
Be sure to follow me on Instagram to get the inside scoop...
►Instagram - @matthewchevalier
🔔 Subscribe and hit the bell to support me and so you don't miss a thing!

[@802Garage]

I def think this is the ticket. Getting rid of the dual mass would be a priority for me as well. Edit: Happy birthday!

[@cmattdabrat]

Thanks! I think so too.

[@montitate9182]

Happy birthday. Still enjoying the build series. Keep up the good work.

[@cmattdabrat]

Thank you!

[@johnbryner9052]

Happy Birthday for the 4th. Cool, piston’s arrived today, heck yeah! Hopefully bottom end is good. You could use the break. Good luck and I’ll see when u drop it.

[@cmattdabrat]

Thanks! So far, so good.

[@hamoode4581]

Happy birthday my guy!! That billet flywheel will hold down some power for sure 💯

[@cmattdabrat]

Thanks! I think so too.

[@strykerblythe]

Happy birthday man! Keep up the awesome work! Gt35

[@cmattdabrat]

Thank you!

[@termochiptr]

This is only project. I'd love to watch. And as always it's great

[@cmattdabrat]

Awesome, thank you!

[@HRTSBRT]

another nice piece in this "i'm just going to quickly ebay boost my cruze"-journey :D happy birthday and best wishes! hope you'll have a blast!

[@cmattdabrat]

Right! lol... I appreciate it!

[@Slo_300c]

I have done some little things to my Cruze but Im finally done rebuilding my Subaru baja engine now it’s time to pull the cruzes and do a full rebuild and make it a little project inspired by you much love man

[@cmattdabrat]

That's awesome! Keep us updated on how the build goes.

[@jay1185]

Happy Birthday! That's a nice flywheel you've got there!

[@cmattdabrat]

Thanks!

[@yurikohako]

Happy b-day week! Enjoy that. Build getting together nicely :) :) Gt35!!

[@cmattdabrat]

Thanks!

[@JosefTrull]

Happy birthday brother. Hopefully this flywheel is the perfect set of wings to make this car fly!

[@cmattdabrat]

Thank you! This should be the ticket!

[@sand_riders]

Man that's a beefy flywheel wooowie. GT35

[@lillpee]

GT35. That flywheel looks pretty nice. Hopefully it works out. Happy birthday

[@cmattdabrat]

Thanks!

[@johnsnow1355]

It's critical the flywheel gets balanced to the crank. Any aftermarket flywheel has to be balanced to the engines crank.

[@jordanwatts7192]

Having a proper flywheel definitely will help put the power down reliably. Especially with a gt35 turbo. 👌🏾👌🏾

[@cmattdabrat]

I agree 100%

[@ExpoPerformence]

First off I gotta say the quality of this video is 👌🏽 every video is just an improvement from your last! Also that Flywheel is looking so good man I bet it was hard to not open it right away. I would’ve 😂😅 (GT35)

[@cmattdabrat]

Thank you! I really appreciate it! LOL, it came in and I had to toss a camera up right away.. then edit in the rest of the bits.

[@boosted2.4_sky]

This is absolutely what you want unless you have bigger cams and a port job then the aluminum flywheel comes into play because you're looking at power from upper RPM ... my understanding you didn't Port the head and go with bigger cams and valves.... do you don't want or need the aluminum flywheel.... .....LET'S GO 🏁

[@cmattdabrat]

Thanks for the feedback and great points made!

[@arashtorabi8852]

Hi Matthew that's nice flywheel I hope it holds the pressure and happy birthday I wish you the best 🥳🥳🥳🥳

[@cmattdabrat]

Thank you! Can't wait to get her back on the road.

[@w.r.1356]

Happy Bday bro, be safe but enjoy it. GT35

[@cmattdabrat]

Appreciate it!!

[@gabymaldo2424]

Come on Matt, you didn't put the sticker on the toolbox 🤣hope that flywheel work, good luck bro💪

[@cmattdabrat]

LOL! I thought about it, and lost the paper with the sticker.

[@chikunman133]

Happy birthday dude

[@cmattdabrat]

Thank you!

[@brandonhorstman1774]

Besides from being awesome matt how did u start to explode and make amazing videos I'm thinking bout kinda doing what your doing

[@cmattdabrat]

Thanks, for the most part. Just consistent uploads. At least a video a week. Also, search engine optimize the video keywords. Personality plays a role as well, but thumbnails are huge too. This is my second channel, smaller of the two. Good luck and you can do it! Just stick with it.

[@Turbo-87-318]

Happy Birthday!

[@cmattdabrat]

Thank you!

[@mastercricket7626]

Rad bro I running a chromoly 9.5lb with a 6 puck unsprung and I think the pressure plate was rated at 300ft lbs tq idk it at its limit tho , I been thinking going g to a twin disk but idk yet ... super happy 4 ya tho looks rad af and should deff hold up good for ya brotha 💪 🤙🏽🤘🏼✌🏽

[@cmattdabrat]

Nice! Could possibly just upgrade to a full solid clutch disk. Same thing in the twin. Good for 550 ft lbs, but twin sounds dope. I appreciate it!

[@mastercricket7626]

@@cmattdabrat good idea bro I might have to look into that ... and deff bro we need more love in the community... peace bro stay rad and safe l8r

[@generiley355]

Happy Birthday Matt......maybe it is not the flywheel but the bolts......the steel is too hard or too soft........GT35

[@cmattdabrat]

Thanks! Lot of truth to that.

[@doomedacejoker1]

Happy birthday!!!

[@cmattdabrat]

:) Thanks!

[@stevenkoutsouradis5541]

Enjoy your birthday weekend!

[@cmattdabrat]

Thank you!!

[@jeffboyer8214]

Possible 6 pound difference I bet. That's a nice piece. You may want to think about a scatter shield 🛡 that way you save stuff including your foot or 🦵. Nice busy weekend 👌 Happy birthday 🎂 🥳 🎉. Be safe team.

[@cmattdabrat]

Great idea! I'll look for something. Thanks!

[@johnsnow1355]

Especially buzzing this motor to 8000rpm

[@FA-sr6lx]

I wanted to see you install the billet 😱😱😱

[@cmattdabrat]

Next video!

[@ThankMeNowBro]

Happy birthday!

[@cmattdabrat]

Thanks!

[@scottybasham1020]

I’ve never heard of such thing, but I wonder if you could double nut a stud into the crank and run a stud and nut setup for the flywheel? 🤔 you would be able to obtain the most even toque load that way I would think.

[@cmattdabrat]

I haven't either. You would think that would be an option via ARP.

[@the8valveturbo]

This is 100% going to sort your problem out. But youve drilled your crank to take the larger bolts, so i guess your replacing the crank? And how many KG is is 16lbs 9?? (Should do both conversions next time ha!!) My billet is 4.5KG, so you wont be too far away with that bad boy, and have a great birthday man !

[@cmattdabrat]

I think so too! The built engine is going in with the forged pistons, and stage 2 cams. So I'll be using the balanced crankshaft that's in that motor. LOL... it's 7.5 kg. Little heavier, but should hold up.

[@matthewfazenbaker8850]

Hey bud just wanted to give you a belated birthday I meant to do it yesterday... But life hope you had a good one.

[@cmattdabrat]

Thank you! It was a good one.

[@PETERDUDZIAKK]

Happpy birthday bro

[@cmattdabrat]

I appreciate it!

[@skecher8469]

Happy birthday bro 🎂🍻🎉

[@cmattdabrat]

Going to be a fun celebration! Crawfish fest!

[@skecher8469]

Nice enjoy your day and own it 😉

[@SnapshotTube2]

I run a similar kit twin disc on my BMW E60 M5. Prepare for the chatter lol.

[@cmattdabrat]

Awesome! lol, the aluminum single mass did the same thing. Chatter when in neutral unless I pressed the clutch, but I'm cool with it. I just have to remind myself, it's not the engine making noise, just the clutch flywheel setup.

[@SnapshotTube2]

@@cmattdabrat yeah, it's definitely an odd sound to be coming from a 9000 RPM V10. Lol, my German tractor. Good luck with the Cruz!

[@CeezarPie]

Gt3582 Happy Birthday !

[@cmattdabrat]

Thank you!

[@matthewlowton2151]

GT35!!!

[@builtbybagsy]

Are you able to provide a link for the flywheel? I'm after the specs, diameter flywheel PCD etc to see if it will suit me setup. Thanks

[@cmattdabrat]

specclutch.com/product/sc17s/

[@justinfisher2045]

This flywheel and the clutch you are using are listed for the 1.4L engine. Any issues or modifications required to make them work on the 1.8L? SPEC has told me the 1.4L and 1.8L are different for my model year (2016 limited) but the OE part numbers are the same. Thanks.

[@foldgermale]

Enjoy! GT35 🇺🇲 ✨⛽⚡

[@matthewfazenbaker8850]

"GT35" 🙏

[@mypony7310]

Gt35

[@jhanTheman]

GT35

[@1SGBob1]

Video where???

[@cmattdabrat]

Comment GT35 here kzbin.info/www/bejne/jWPYq5uBid-YoJY to enter to win!

[@Turbo-87-318]

"GT35"

[@1234567890CAB]

GT35