Will This ABANDONED Hot Rod Squarebody Live Again?

I now some new MERCH available!!! THANKS FOR SUPPORTING THE CHANNEL!
okspeedshop.myshopify.com
Description:
Legend has it that this motor was build for the dirt track races with a giant cam in it and a rebuilt turbo 400 tranny. 3500 stall converter. She’s a 400 block Chevy with a 350 crank making her a 377 Stroker! The only problem is she’s been sitting in a field for 6-7 years. Follow along as I drag her home, clean her up and try to breath some life back into the ol girl. She’s a fire breather I will say that much!!
Thanks for liking commenting and subscribing. I need all the help I can get on this old pickup so please give any advice that you can!!
If you want to get connected and help me grow the channel by being a part of some members only conversations and early access to content, consider signing up to be a ShOp-DaWg! My dog Bandit is always right there beside me in the shop and is the first to hear every idea and see the progess on what im working on. To join the Shop Dawgs click here:
/ @okspeedshop
If you like this stuff you need to check out my friends :
‪@WhiskeyDents‬
‪@ClassicCarRevivals‬
‪@Tannerrebuilds‬
Thanks for all the support everyone!!
#classictruck #hotrod #squarebody #squarebodynation #shortbedchevy #chevypickup #willitrun #firststart #mechanic

[@WhiskeyDents]

That’s for the kind words. I appreciate it! You’ll get there buddy!

[@okspeedshop]

Dude, can’t express how much I appreciate your support of the channel. Glad to see your success

[@Tannerrebuilds]

Thats one rust free truck. And thank you so much for the awesome shout out. I think you will be big in no time

[@okspeedshop]

Thank you dude!

[@lancehigdon8683]

Turn it with the socket

[@lancehigdon8683]

The fan turn a little bit

[@Tannerrebuilds]

@@okspeedshop ya np 😊

[@jamesconklin4027]

😊​@@lancehigdon8683

[@ClassicCarRevivals]

There’s a 9/16 bolt below distributor that you have to loosen. Check firing order and dump that old gas out of it. Thanks for the shout out!

[@okspeedshop]

I found it after the video. Confirmed the firing order and been jacking with timing but struggling. Going to change out plugs and make sure no valves are stuck next. Needs fresh fuel for sure. Who knows. Carb may have trash too.

[@ClassicCarRevivals]

@@okspeedshop mite be a sticky valve hopefully you didn’t bend a push rod

[@DavidNelson-bv8em]

Just Found Your Channel, Like What I See Sofor. You Will Learn More As You Continue Too Work On Thease Old Classics. Wishing You The Best!!

[@okspeedshop]

Thank you sir!

[@victorrobinson9116]

Porter spark plugs out of it and soak it with some PB blaster if not WD-40 and manually rotate the motor by the front crank or the flywheel !

[@lsingleton77]

THIS!

[@BrothersAuto1996]

Check spark plug wire firing order first. Next pull distributor cap see if the rotor button is pointing toward # 1 piston when it’s up on compression stroke

[@okspeedshop]

Awesome advice! I’m learning! I appreciate you guys sharing your knowledge! Please keep it up!

[@tech78121]

Love it!! Thought is saw a trailer behind your truck the other day with this on it.. Score!

[@okspeedshop]

Thanks man. I’m excited to have it. Cheap trucks are more fun 😂

[@spassmore8483]

The little silver round thing you said to please comment on is your flasher relay for your turn signals in some years it also does the hazard lights

[@okspeedshop]

Found that out later haha learning a lot

[@michaelyohn3053]

Firing order!! Carburetor as well!!

[@okspeedshop]

Carb is new ish but I prob sucked a bunch of trash fuel through it. I don’t really know how to time an engine yet either. Trying to figure that out. How do I locate number 1 on distributor?

[@spassmore8483]

Can't wait to see where this build goes I just came across your channel it came across my feed and I'm an avid C10 enthusiast I have a 83 that I built 6/8 drop rally wheels it's white with black interior custom gauges it's got a sb 355 ci backed by a 700r4 trans it's been a long process had it almost 15 years and I'll never be done with it it's my baby. My daily driver as well!

[@okspeedshop]

Ah nice I want to see that. What drop kit did you use? I’m about to lower my red one. Thinking 4/6. This blue one is already lowered but they did it by cutting leaf springs out so I may redo the rear. Thanks for watching man

[@spassmore8483]

It's a full belltech set up all the way around with nitro drop 2 shocks. The shocks are for 3-inch drop but it makes it a firmer ride in my opinion much better handling that way too and they have plenty of stroke still no bottoming out... 2" C notch as well.

[@user-ro1ct9cc9p]

Good rebuild

[@okspeedshop]

Thank you!!

[@eirik_halvorsen]

One of the honest will it run-videos I've ever seen😂 Very enjoyable as in different. Phrases like "Don't know what this is" and "Don't know what it's supposed to look like ... (or similar)" really spiced up the viewer experience! It's my first time here on this channel, so I'll subscribe for more 👍

[@okspeedshop]

Hahaha stay tuned for more of me not knowing what the heck I’m doing 😂

[@ClassicCarRevivals]

That silver thing was the blinker relay!

[@bryan2garcia]

I keep reviewing this because I am in love with this truck.

[@okspeedshop]

Wow thanks man! I’m about to get back on her soon. Just got some 373 gears to put in so she’s gonna be fun! Need a hood.

[@bryan2garcia]

@@okspeedshop don’t know where you are located but there is one in Georgia for $100

[@okspeedshop]

@@bryan2garcia Oklahoma but sounds like a good deal if closer to

[@1776_Garage]

Cool truck. You'll get it. God bless!

[@okspeedshop]

Thanks 👍

[@timothymetzler7715]

I just came across your channel i like the content so far like how your honest and just trying your best nothing better than honest work man keep it up youll succeed in no time

[@okspeedshop]

Man I greatly appreciate that! I don’t have much experience but learning a lot and having a blast! Thanks for watching!

[@bossgoon115]

37:36 recheck the wire placement and check to see if your getting fuel to the carb via tank and/or fuel pump.

[@ClassicCarRevivals]

Exhaust hanger

[@user-vl5wl1oq9e]

That is why the flasher was out I would check the firering order and the timing and put good gas in it hope you get it running good

[@okspeedshop]

Makes sense! That’s the plan now!

[@jayb.5017]

1979-80 front end and dash, only thing 1982 I saw were the door panels. Power brake booster with a manual brake pedal. Not a bad little truck though.

[@okspeedshop]

It coded back to an 80! Good eye

[@ronthewelder7305]

I saw the same thing . I have a 82 and I was thinking someone swapped the front clip. Even better being a 80 tho

[@okspeedshop]

@@ronthewelder7305 I agree that’s what I thought as well 🤙🏼

[@victorrobinson9116]

Starter may have water in it you might want to change the starter or at least pull it and bench test it but remember you do have a another starter inside

[@bryan2garcia]

Nice looking truck would not mind owing one like that, went ahead and subscribed to see the follow-ups

[@okspeedshop]

Awesome bro thank you!! Will be posting follow up vid soon with new plugs and some updates. Thanks for joining in! Hoping this truck gets me monetized here on YT. Been a long time goal of mine! Thanks for being a part of that 👊🏻

[@rootperformance7232]

All sbc firing orders are 18436572 in a clockwise rotation on the distributor, number 1 on the cap should be pointing towards cylinder 1, ive also ran into what is known as a 4 and 7 swap on the cam which is i believe only a roller cam deal

[@okspeedshop]

She’s got roller rockers… please explain the 4 and 7 swap thing. Thanks!

[@rootperformance7232]

If it has a specific cam that is designed differently cyl 4 and 7 will switch positions on the firing order rotation usually used with more "race" builds

[@okspeedshop]

@@rootperformance7232 interesting!! I’ll try that

[@johngallagher5341]

Yes it’s the same as a 350 small block. You have a 400 small block with 350 crank rods and pistons in the bottom half of the 400 small block which makes it 373

[@GMCTIM]

Nice old truck ! Our son has the GMC like that ! Good Luck ! 👍✌

[@okspeedshop]

Oh awesome I like the gmc’s even better!

[@125sm3]

New subscriber from across the pond (England) . Great channel.

[@okspeedshop]

Wow awesome thanks so much for joining! Please stay in touch! You. Building anything?

[@125sm3]

@@okspeedshop I don't do KZbin but I am currently restoring a motorbike. Suzuki TS125R

[@okspeedshop]

Oh sweet that sounds like fun. Good luck bud!

[@cwk1981]

god ied work on old trucks like that any day of the week. i grew up working on, building and driving trucks like that. can tell by the way its running the firing order is off. that motor should be pretty snappy. fresh fluids, fresh tune up and maybe some tuning on the carb and timing and that thing should move down the road pretty good.

[@okspeedshop]

Thanks so much! I’m excited about it! I’m literally learning every single thing as I do it so it may take me longer than most but with the help of this KZbin community I think I’m going to get there!! I appreciate the comment!

[@cwk1981]

@@okspeedshop not a problem. I'll try to help answer any questions you have.

[@jonnyvoigt921]

Try turning locked engine by hand, apply the ratchet and turn it over. The ignition doesn't fit, you have to change the ignition cables!!!

[@craigbowley6783]

Always check your wiring connections. Especially your grounds. If they have any rust or corrosion. Clean em off. Also try spraying kroil or PB blaster in the cylinders and cranking it without the spark plugs in.

[@okspeedshop]

Thank you this is great advice. I learned a lot on this one. You all have offered some amazing pointers thank you

[@dustincotten3313]

Firing order!!!

[@okspeedshop]

Thank you I’ll double check this when I get home. I thought I had it right but may have started in wrong spot? Will post follow up video soon

[@rockyjustus2829]

That was a signal blinker, back feeding that purple key wire got it making contact, pull the blinker back out if it will still crank

[@okspeedshop]

Ohh ok I knew it had to be something cuz it was unresponsive before

[@davidwellman7080]

Also, on the base of the distributor has a hold down with a 9/16 bolt that tightens it down.

[@okspeedshop]

Aha! That helps to know 😅

[@WhiskeyDents]

It’s alive

[@victorrobinson9116]

Use the idle screw and turn the idle up just a little bit check your wiring firing order

[@okspeedshop]

Ok awesome thank you I’ll mess with that! What do the other two screws do??

[@Tannerrebuilds]

​@@okspeedshopare they on the carb? If so those are for adjusting how much fuel goes in clock wise is for rich and counter clock wise for lean

[@okspeedshop]

Yes on the carb. Two screws, are both for same thing?

[@jaylawz1]

Change the gas or run an external gas can. Adjust the timing or check the ignition coil under the cap. Check the cap contact points as well and make sure they are clean.

[@okspeedshop]

After vid posted I did just that (minus distributor cap) helped a ton! Thank you!

[@jaylawz1]

@@okspeedshop no prob and I'm looking forward to more vids on the project. Good buy!

[@okspeedshop]

@@jaylawz1 thank you bro!! Coming soon!

[@billycapshew2411]

Its a flasher for the signal lights/emergency flashers

[@tylerphillips3243]

Exhaust hanger lol

[@ronaldcarmony3068]

Good luck with your channel I only seen you have just a few videos 👍

[@okspeedshop]

Thank you! Yes was fortunate and got some views early on. Hoping to keep of the momentum. Thanks for commenting!

[@chrisharriman9017]

Change oil run zinc additive Lucas . I'd pull the valve covers check valves etc then go to timing then fuel

[@okspeedshop]

Zinc additive Lucas. NOTED thank you!

[@1776_Garage]

Put some 2 cycle oil mixed in fuel to help lubricate pistons so they're not dry

[@okspeedshop]

i got some for the next one! Thanks!

[@ClassicCarRevivals]

Leave the moss that’s awesome!

[@WhiskeyDents]

Call it mossome

[@okspeedshop]

Hahaha yall ain’t right.

[@tech78121]

It can run!!

[@okspeedshop]

It. Is. ALIVE! 😂

[@RattleTrapGarage]

That little register is a flasher for the blinker, but I think you're battery was low

[@Shakira_6.0]

Most times you definitely don't want to rev a motor that's been sitting that long. Especially one that's been built

[@okspeedshop]

Woops 😅 see this is why I need y’all’s help

[@ironguy1916]

Definitely check you firing order can tell it's not hitting on all 8 if im not mistaken the 400 firing order is the same thru out all sbc motors

[@okspeedshop]

Ok I’ll double check that today thank you

[@timothymetzler7715]

Some vice grip garage shine juice and you got a looker there 🎉

[@okspeedshop]

Thank ya buddy 😄

[@victorrobinson9116]

There's a lock nut under the distributor which is a half inch or a 13 mm

[@okspeedshop]

FOUND IT 😅

[@user-ul3cp4kz2i]

Put the transmission in reverse and rock it back and forth !

[@okspeedshop]

Oh, I was trying in neutral. Reverse is better?

[@ClassicCarRevivals]

Sweet

[@okspeedshop]

🤘🏻🤘🏻 this has been what’s been distracting me from wiring that fan 😂

[@victorrobinson9116]

40 years experience , California Smoke

[@okspeedshop]

Glad to have guys like you willing to chime in for a newbie! Needing all the help I can get!

[@mattmonteith2175]

If u have any questions about any Chev truck let's me know

[@okspeedshop]

So many questions haha

[@andy347495]

oh man, this is painful. you and dd's speed shop need to hang out.

[@okspeedshop]

Would love to! 😜

[@tracywalters5606]

Get the number one hole piston up to top then run the firing order then get wrench and loosen the bolt under the cap on intake and turn the thing

[@okspeedshop]

Thanks!!

[@scottkellogg8145]

Definitely do a oil change also to make sure you get it all out especially if any water in it since you said it was sitting in water

[@okspeedshop]

Good idea that’s on the list for sure

[@samstrawn3157]

Cree oil works great also

[@okspeedshop]

Never heard of that I’ll check that out thank you!

[@victorrobinson9116]

Is the flasher for the turn signals and hazards

[@okspeedshop]

So does that make a difference on whether ign switch gets power? When I reinstalled it the key worked?!

[@mattmonteith2175]

It's for the flashers. U probably found a purple hot wire from the starter. To the coil.

[@victorrobinson9116]

Also you want to make sure it's in park or at least the neutral safety switch is engaged

[@okspeedshop]

Yes that’s a good point that could be bad!

[@joseguerra3989]

Brother make sure none of your wires a crossed first. Very cool truck!!!

[@okspeedshop]

Thank you man! She definitely needs a little wiring work!! 😅 stay tuned!

[@andy347495]

dude, i can tell you dont have much experience. but switching wires around can cause some serious problems. I've seen an engine backfire and blow starter off because the wires were mixed around. be careful, man.

[@okspeedshop]

Yikes! Got lucky I guess. Thanks for the heads up. Fortunately didn’t have to learn that the hard way.

[@victorrobinson9116]

Put the fuel filter before the fuel pump not after because the diaphragm in the fuel pump will go bad with the trash in the gas tank always put the fuel filter before the fuel pump not after

[@okspeedshop]

Ah good idea. Does it hurt to have two filters? If I cut one in before pump do I need to do away with this one?

[@williammccabe3767]

Factory filter is on the carb inlet on a quadrajet, so it’s after the pump. Personally I would have it before the pump too, not knowing what condition your tank is, run the two filters. Fuel is probably bad, pull the tank, check and clean it, blow the fuel lines out. Go through the firing order, if you have not already Clean or change your plugs

[@okspeedshop]

@@williammccabe3767 thank you!

[@joemann6808]

There's a hold down bolt at the base of the distributed on the right side

[@okspeedshop]

Ok I’ll look for that tomorrow!

[@technibroomco974]

The idle circuit on the carburetor might be clogged and it leans out when it tries to idle you can get a rebuild kit and try rebuilding it but very simple there’s many videos on how to rebuild one of those carburetors Edelbrock 1406

[@okspeedshop]

Awesome sounds like I need to do some studying. Thanks!

[@nicklopez3580]

Take the spark plugs out and put marvel mystery oil in the cylinders let sit for a day or two then put a socket on crank bolt and rock it and get a full 360 degree rotation on engine

[@billycapshew2411]

The turn signal lever is broken or missing is why the flasher was out pull it back out blinker will go off

[@okspeedshop]

I had that same thought earlier haha I bet that’s right

[@bossgoon115]

39:54 Also make sure wires are pulled up off headers.. might be shorting out.

[@okspeedshop]

Oh I didn’t know that could happen by touching headers. That might be a problem

[@dlyall26]

That silver thing is for your blinkers. I think your the switch on the steering column might be dirty and not making a good connection

[@okspeedshop]

Yes discovered that later haha. I’m learning

[@ClassicCarRevivals]

That’s a trans mount!

[@okspeedshop]

I need you with me on these deals haha

[@JuanSandoval-lp5ks]

Start with 2 cycle oil and fuel in carb to start for lubrication with new plugs ,cap,rotor, and fresh stand alone fuel tank and watch her fire. I start old engines in worse condition, love to bring um back to live.

[@okspeedshop]

Ohhh yeah I remember seeing some people do that!! Thanks for the reminder I will get some to keep around!!

[@chriswatson4261]

Firing order

[@okspeedshop]

I’ll give it a check again today!!

[@adampatterson3188]

Huh, ran into your video this morning. Think i actually know you from somewhere ..? Anyways badass truck man. Nice seeing another person wanting to learn. Umm you definitely need to get your firing order correct..do not ever rev the guts out of an engine like that, that is clearly firing wrong/ timing may be a bit off. You WILL ruin the engine. Well hell man! Good luck and ill be watching. Sure am excited too see what all you do with this. Ill obviously check out the rest of your channel.

[@okspeedshop]

Hat man thanks for watching! I appreciate the advice and the kind words! No telling, might have met you! I’ve been all over. Where are you from?

[@teresawoodruff1170]

Definitely plug wires are crossed.

[@user-wq1wz2cb2q]

That one piece was a exhaust hanger and the mount is a transmission mount

[@madisonholley563]

Watch some vice grip grange he can teach you a lot

[@okspeedshop]

Already on it my guy 😜

[@andy347495]

oh yeah, she sounds like a beast🙄 lo. it sounds more like my clapped out 1978 305 .

[@okspeedshop]

Probably worse. Sounds like my lawn mower right now.

[@nicklopez3580]

Definitely scheme that starter

[@okspeedshop]

What’s that mean? 🤣

[@user-pm9sm9nk6o]

Take your inspection pan off, and get a big flat screw driver, and free up the motor.

[@okspeedshop]

I watched a video on somebody doing that, I was able to access the flywheel with a prybar, but I wasn’t having any luck. Glad I finally got freed up!

[@richarddavis3007]

Take the dust cover off put the pry bar on the flywheel turn it

[@chadwickstanley1258]

Definitely sounds like you got a few wires crossed.

[@okspeedshop]

Ok I’m gonna re check that. Thank you

[@dougbranum6386]

That's metal piece with the rubber grommet looking thinig you picked up outta the back was an exhaust hanger I believe

[@okspeedshop]

Yep that’s what I’ve been hearing. Thank you

[@dougbranum6386]

Yessir I dig the truck. I'm looking forward to more content with it.

[@okspeedshop]

@@dougbranum6386 thank you bro! I’ve got this one going and just picked up an 83 to tinker with too for the channel. Thanks for being a part!

[@dougbranum6386]

Heck yeah that's the year I was born, actually on this day in 83.. Lol

[@okspeedshop]

@@dougbranum6386 sweet happy birthday! Must’ve been a day of greatness!!!

[@landoooooooo69]

At the beginning when cleaning out the bed that thing you asked what it was, was an exhaust hanger lol. Don’t know how you didn’t catch that one lolzzz

[@okspeedshop]

I’m a newb I don’t know what anything is haha

[@landoooooooo69]

@@okspeedshop truck is awesome sure wish I could find some gems like this in my area!

[@landoooooooo69]

@@okspeedshopjust got farther into the video. I don’t think it’s locked up. I think it may just be hydro locked. Pull the plugs and see if it turns over. If it’s hydro locked it won’t turn over by hand either because theirs no where for the water to go on the pistons. If you pull the plugs and it still won’t turn over it’s locked up.

[@okspeedshop]

@@landoooooooo69 you nailed it!

[@landoooooooo69]

@@okspeedshop theirs multiple variables to it back firing out the carb. 1 could be air to fuel mixture not right.. could be an air leak or like you said timing. Being that you have to keep the rpm’s up to stay running I think it’s running to lean which is not enough fuel. If it was too rich it would back fire out the exhaust. I’d start by taking the carb off and clean it regardless and when putting it back on check make sure no vacuum leaks and play with the idle screws to find that happy medium spot. If you want to just jump to it just bump the idle screw up and see if that helps. If you go through all of those steps and still nothing I’d check fuel pressure and filters. But with it running when giving it gas I think it’s just the idle screw. They tend to work loose from vibration over time.

[@robertbrown1414]

Idle the carburetor up alittle so it will stay running

[@freedomrelaxation59]

It sounds like it's still not hitting on all 8 . Either another wire is crossed or timing or timing chain has jumped a notch or two. Or the plugs are really bad in it. Good luck!

[@okspeedshop]

Changed out plugs and it helped ALOT. check out the next video and let me know what you think

[@1776_Garage]

I love square bodies

[@okspeedshop]

They are pretty sweet trucks! They seem to have their own large following!

[@1776_Garage]

@@okspeedshop Yep. I like all brands from the 60s through the 80s. More character.

[@ClassicCarRevivals]

95 dollars later the truck is clean

[@WhiskeyDents]

Half off Sundays at the whale of a wash

[@okspeedshop]

😂😂😂😂😂

[@okspeedshop]

They made their quota on just me that day

[@1776_Garage]

Cool channel

[@okspeedshop]

Thanks man!

[@blazinSpike]

There's a fusible link on the fire wall that blows it's in a block

[@nicklopez3580]

Also set your idle screw in a little

[@Uriahheep1975]

Mechanic here. Jst subscribed. Oh no. No. Thats painful to watch man. Dont rev man. Firig order man. Theres a lok nut under the dstributr. Yull get there man. Good luck man. I wish growth on yer channel man. Watching from Christmas Island.

[@okspeedshop]

😅😅😅 thanks for watching got some more stuff coming out. Please let me know what you hear as I tune it up! Thanks!

[@TylersNeighborhoodGarage]

You should do a compression test to see whether there are stuck valves. A stuck intake valve will cause backfiring and noise out of the carburetor. One hint for you as you get more experience working on things like this- work backwards from what the worse cause for an engine not turning is. You spent a lot of time changing the starter, and worrying about the wires to the starter, and plugging the turn signal relay back in, when the engine was just flat out locked up. If you aren't sure what you should do, google it.If you guess at things you will go from an engine that's probably already in time to one that is way out of time. Remember that doctors don't try to cure the symptom, they try to cure the cause. I'd do the compression test and make sure each cylinder is contributing. Have fun!

[@okspeedshop]

Man this is great advice that I needed to hear. Thank you so much. I have already learned so much because of guys like you being kind enough to chime in. I will be this much further ahead on future projects! Also I checked out your channel and subscribed! Your channel is going to be a great resource for me! Thanks for connecting! 👊🏻

[@EthanMccurdy-tx9dv]

The timing is off there is a clamp on the bottom of the distributor that you have to loosen up to adjust the timing

[@okspeedshop]

I later found a 9/16 bolt that worked! Thank you!

[@EthanMccurdy-tx9dv]

​@@okspeedshopyour welcome

[@WhiskeyDents]

I think you need a starter

[@Tannerrebuilds]

😂😂 he replaced it though

[@estelallen]

Check the firing order on the spark plugs

[@robertbrown1414]

Check your spark plugs wires before you mess with the timing

[@WhiskeyDents]

That wire off the distributor was probably for the tach

[@okspeedshop]

Yep that’s what it ended up being!

[@johncreech-is7ph]

that stuff is called letchen it grow's on oak tree's to

[@okspeedshop]

I guess it isn’t prejudice between oaks and chevys haha

[@user-qb5bf9il2v]

😊 take a positive wire run it down and touch the starter

[@okspeedshop]

Yes I need to do some wiring. May do that today. Thank you

[@kobusfranken6338]

Put extra ground wire on starter

[@okspeedshop]

To block or frame or body? Does it matter?

[@joonyer3143]

Trace your firing order out. Or its 180 degrees out. Not really positive on the 180 out though. I wouldn't move the distributor cause the vacuum advance looks like it's in about the right vicinity its supposed to be. Carb is gonna need adjusting as well. Hopefully you wont have overheating issues with that 400 sb. It's got potential bro.

[@okspeedshop]

Thanks so much for this comment. After replacing spark plugs it cleaned up a LOT. I think it will just need some fine tuning now. I’m not really experienced in that so any advice is welcomed! Thanks!

[@lzlz-xv6oe]

Agreed, distributor could be off 180⁰ or firing order off. Engine sounds sickly.

[@okspeedshop]

@@lzlz-xv6oe please stay tuned I’m going to post a follow up vid with new spark plugs and messing with timing. Want to hear what you guys think after that. I’m just learning so I need y’all’s trained ears. Thank you!

[@BrandyMcgrogan-kh4rl]

Take the plugs out and spray the cylinders