WILL WE MAKE GRIDLIFE?! Supercharged LS3 E36!

[@IdeaV2]

We still need a Jimmy in shorts video (we didn’t forget)

[@SIMMONSx22xPOINTx0H]

kzbin.info/www/bejne/kJu0iKaqn6afkMU Shorts Jimmy made an appearance in OG Larry

[@TheXpert.]

Yeah is he just not gonna talk about all them shorts

[@dirtyleww]

Pasty boi

[@scottwheeler6173]

Like trying to film the sun

[@freddiewouldgo]

We had a jimmy without a shirt on last video.

[@patrickbowen5567]

Best part about watching Jimmy is the way he explains things. Your not just watching him build your learning as well. Professor Oakes.

[@Codeinelepew]

💯

[@negativeindustrial]

It’s the other way around for me. I watch these shows to learn tricks, Jimmy and his crew being entertaining is just a huge bonus. They’re easily the best bunch of garage dudes I’ve ever seen and I’ve been in garages a very long time.

[@RayRaspberries]

Everyone needs a friend like Spoon, "Woosah, we got this!"

[@BariLopesh]

"Employee" ...

[@jakep5414]

Jimmy, Im a journeyman level machinist with two decades of experience. If you buy a manual mill and lathe I'll teach you and spoon how to run both safely and eliminate your need to go get that work done. You'll gain so much function towards fabrication

[@dariososa3799]

Love how spoon is already planning work for next season! That man’s grind inspiring myself to be better all around. Appreciate Jimmy for showcasing Spoon!!! ✊🏻✊🏻

[@williambranco7710]

I get most excitement when either cleetus and you puts out a new video. You both make your content with friends and make your subscribers feel like they are friends along with you. Love it Jimmy. Thank you

[@GrmlMaster]

I had the feeling that Cleetus is completely out of ideas for interesting projects. From whats popping up in my timeline it‘s one Giveaway-car after another nowadays…

[@hazzer0]

@@GrmlMaster dont forget that when there isnt alot of big drag events on that takes away a huge chunk of the content they usually put out

[@wcovey25]

I think labeled wiring harnesses are Jimmy’s favorite thing

[@mikeymk3]

the early video names are always gold

[@SMUDESS]

"in other words im cutting the whole back half of this car off before next season" had me rolling! gotta love doing racecar shit Spoon!

[@lowbxxst]

Everysingle person on this team is so crucial, But quick shoutout to Spoon. Mans holds it down for the team 🔥🔥🔥

[@minesbetter3504]

*Adding a reservoir/water box for the heat exchanger setup would make it most efficient. Possible future project considering the time crunch.*

[@pahaf1991]

Jimmy, you are amazing. Love the friend group you have. It is rare now at days. Keep up the great work guys.

[@justdee2457]

Best part about this upload is Darren not talking not one word 🙌

[@SKOMPAS]

Jimmy the heat exchanger is only overkill because of the absolutely tiny stock heat exchanger in the supercharger lid!

[@BillMike69]

FYI, you don't want your super charger belt too tight. When the super charger heats up it will expand and lift making the belt tighter. The expansion may make the belt too tight and wear out the pulley bearing on the supercharger. It's bad all together. I love lamp.

[@andrewramelb8622]

Looks like you're gonna have to bring Ant back to help in the garage with that much projects going on

[@MegaSourPatch]

T BONE

[@wrexz]

Loving this build but.. 11:26 spoon using regular adjustable wrenches on the fuel line.. someone sent you guys a pair of AN wrenches in the last sub mail lol

[@markbradley769]

I was a counter person at a Napa for ten years and you would be one of my favorite customers. I loved the drift kid coming in asking to go look at belts and hoses. Most had crud shapes drawn on scratch paper. So much fun to see the after the sale side from your perspective. 👍 keep it up crew.

[@MacheteMB1775]

This is how all great ppl started

[@KevinDarwish03]

You should try to mount the fuel pressure sensor somewhere on the chassis versus on the engine. These sensors don't like the vibrations...I've gone through 2 sensors within a couple of months on my LS drift car.

[@240Trevor]

Such a good build as usual. Cant wait to see this thing get some podiums!

[@Justinhomii]

Remember all the problems they had with it on track

[@240Trevor]

@@Justinhomii Yea, shouldn’t have any problems now tho.

[@yazantuffaha9321]

My favorite channel, best vibes

[@brandoncrider3697]

Professor Oakes we need more of this! Teach us your ways good sir!

[@rynoasphalt4172]

Hey Jimmy. In the LS world you should have y'ed off at the back of the fuel rails for the feeds to come in then crossed over the fronts to the regulator for more even fuel pressure to the rails. Just what everyone usually does on LS boosted applications.

[@mikeg8773]

Jimmy's build vs Brian's is basically a High/Low build off 😂 can't wait for em to send it together. Freedom noises.

[@twelevensies]

I've never heard Debbie down used it that way. Lol it's double down. I'm stealing it though. 😂👍

[@holdentudix8521]

up the farking kiwis!! 🇳🇿 for a little country you really giving us some love jim dog. appreciate the hard yaka that you and the boys put in on the vids

[@Ogknav]

23:45 Aye I was waiting for the kiss, too. Jimmy out here makin all kinds of bets and not following through.

[@themajesticmanic]

NOT "Pre-Detonation"... It's either "Pre-Ignition" OR "Detonation" THEY ARE DIFFERENT!!! Luv you!

[@luciandickens2418]

Greetings from South Africa 🇿🇦 Awesome progress

[@justcleanitllc5796]

Spoon should totally make a episode on tig welding when he does his cage in depth would make for some fire 🔥

[@tristannivens3269]

Aeroquip makes a high pressure line that I used on my power steering. Part number is FCG0603. May be easier than having to go to a hydraulic shop. Fragola also has power steering AN fittings that I used with the hose.

[@CaleMessner]

You could always put a 90° fitting on that 10 bar link sensor and face it upwards, would look better than sticking out of the rail at a funky angle

[@gateaccess818]

@19:37, long as you have air guides youll have no issues with radiator.

[@101cubanjr]

I love the fact you guys make things work that don’t necessarily work. Your guys work is legit. Ty for the great content.

[@GeorgeLambadas]

The vibe of this video is EXACTLY the way I felt finishing up my swap. Radiator hose struggles can be real when your rad is sat close to the engine

[@zz4748]

You all are doing amazing work. Cannot wait to see this thing rip. SUPERCHARGER NOISES!!!!!!

[@alexlerman1792]

Jim keeps saying ‘Debbie down’ and its driving me nuts lmao

[@PandamoniuGaming]

I actually have a crown majesta with a Fenix Performance radiator, they're ridiculously good and amazing for the price, like you really get the quality you pay for with their products

[@shadowsandfire]

Damn I need a spoon for my workshop! He can do it all!

[@SlaterGator]

That feeling when you buy random hoses from the autoparts store and they fit. 🤩

[@BarbWaltersMusic]

Spoons face after James saying he's gonna show him how to paint haha

[@hank2851]

Rushing to finish a car with a new setup and little testing tends to cause more stress during comp , I'd rather miss an event to dial the car in. I hope all goes well. Shred that bish and have fun.

[@killacam2644]

Who else was terrified when Jim walked down the ladder ?

[@texaspowerman]

It looked like he was levitating.

[@darrenhattingh7334]

An e46 rad has the inlets in the right spot for that setup.

[@dapperdanbuilds]

Man, i LOVE seeing everybody getting in there to get it done! Best crew on the Tube!

[@ml-xd8ix]

Just make sure you only activate the second fuel pump when you need it otherwise you can have full pressure creep at low rpm because of the smaller return line.

[@DCgoingpro]

Learned a old trick about sticking springs inside coolant hoses to make sure they keep their shape

[@tylerbennest7531]

Build content is my fav content

[@austinsmith1815]

Can’t wait to hear that thing run!

[@ROG_Pops]

I got faith. Yall got this boys just keep bolting shit on.

[@luisjaquez3227]

GOOD MORNING PATREON

[@mattfuller216]

Jimmy with the ima show spoon how to paint real quick and the look on spoons face like whaaat 🤔 gotta em 😂😂

[@alejandroguillen1159]

Need a coil pack bracket on the Porche like your ls3. Would clean up the engine alot but im sure has to be custom to lock them in as well

[@jaycar06ify]

Wish you nothin but the best Jimmy! The lineup is getting too strong. I don't know if we can handle it. The 911... LSE36... Killin it

[@babyyoda6587]

Spoon is the goat 🐐

[@sergio199762]

I honestly forgot about the beat😂😂 keep up the good work jimmy! Love your vids always informative and fun!!!

[@brodieruskin7039]

Heat shield everything 🙏

[@TimFrostExclusive]

You guys are knocking it out the park. 🤙🏾

[@aidanteichert1290]

Can’t wait to meet y’all at gridlife

[@Hondrenalin]

Just fly in Trevor from Motion Auto...He loves crunch time 🙈 .. good luck with V36 😎

[@TheXpert.]

Very useful info for a new guy to wiring so thank you for these videos helps me gain confidence in taring into a car

[@Dani-nv6ns]

Im waiting for the kiss too Austin

[@r3drocket659]

This car is turning out so sick, I love it! Keep it up!

[@wrexz]

if you weren't under a major time crunch AN radiator hoses would be the move also, if cooling is an issue you should think about running and intercooler water spray system. LZ had it on one of his cars a few years ago.. R32 sedan maybe. Subaru STI used to come with them from the factory. but if you had a gallon tank in the trunk filled with ice water to spray on the heat exchanger and radiator you'd definitely keep temps down while turning lots of laps

[@TheRowdyRudy]

i love how spoon reassured jimmy that they go it, thats love fr lol

[@jimmydaniel1127]

Run that wiring harness under supercharger will look way better and won't take but 30min good work guys keep it up

[@dbcolmenero]

Glad to see u guys made it to grid life!!!! Sorry for the spoiler to everyone else lol

[@WhiskeyGulf71]

If it’s a generic swap that has been done before then surely the wiring plugging in should have a sequence ?

[@tdhbb]

Yoooo spoon shot his shot on that kiss tho lol😂😂

[@kennethpeters5461]

I had to do the same thing with the hose’s on my LS e46 luckily I work for a parts store 😅

[@gateaccess818]

@09:56, new fuel pump relay circuit separate from the oem fuel pump wiring? please and thank you =]

[@kzarnold3678]

Nicely done 👍

[@MSK23]

More Nissonda!

[@seanhenderson2079]

This is the video I’ve been waiting for.

[@negativeindustrial]

I feel you, Jimmy. My 1JZTT is down, as well. But! We have other cars and, for me, a 3S-GTE is the next best thing. I’m sure you must have another engine that gets you 90% of the thrill of a 1JZ?

[@RNS149]

First rule about removing a hood is having a place to put it lol 😂 #shoplife that thing is definitely in there tight a friend of mine LS swapped an E46 and his setup is tight as well but once you get it in that things gonna scream!

[@tylertakingover]

Go Katech 160 Thermostat, will help a lot with temps

[@robbeehz]

waiting for the kiss, just killed me 🤣🤣🤣🤣

[@gateaccess818]

@23:42... where's that kiss!!!! lmfao hahaha

[@killeratWAW]

jimnmy the goat fr

[@tommoon2700]

Man everything about this car is sick af

[@darxxtuff]

All that talent standing there, quite. And you didn't have him say AAACTTIIOOONN!! HAHA seeing Darren calm and quite, is weird lol

[@stephenwright414]

Lobe this channel -yay Brian content!

[@gabrielcortez884]

I can’t wait to see this machine rip !!

[@johngoepel5263]

I really wish I had a car/engine that could use a Wiring Specialties harness.

[@WP_DIYEverything]

Can't wait to see/hear this thing rip

[@Peteblz1]

Could you run methanol if you wanted to? That would help even more with intake temp. Plus more hp! Love the content! ❤

[@Yourmomlikesbuttstuff]

Yes but he would need a lot more fuel system, plus methanol is way more expensive than pump e85. I’m pretty sure he just runs pump e85 because it’s available and cheap.

[@alienfac32]

hell yeah. keep it up guys. i love how u still keep the good vibes going. thank you for the content.

[@willnewing4240]

Hey Jimmy, good to see you’ve stopped saying “so” so much 😂 been watching all of your old vids

[@drewvalenzano746]

Spoon's face about showing him how to paint!

[@zacheusfass319]

I've never had metal in my eye till yesterday and my God that was a long day until it was removed

[@christomofo88]

Everyone needs a Spoon for awesome metal gluing skills and occasional mouth kisses (if thats your thing (no judgement)) 😁👍

[@MeSessum]

Won’t that engine need a break-in period when the install is done? Didn’t think it could go straight to the track.

[@bradenjones820]

This things gonna riiiiiip

[@rrrandomman07]

Its J I C my dear jimmothy

[@Robsthestig]

Anyone else play the drinking game when Jimmy says “right?/!”? 42 times this episode… I’m shitted 🤣 keep it up boys! 🍻🤙🏼

[@LuisitoSuavecito]

Nooooo I’m so sad why did it have to end like that! Good luck jimmy im rooting for you to make it

[@J0K3R_the_Nerd]

Joking but kinda serious, wouldn't Nissonda be capable for Final Bout?

[@ChinitFxt]

How the heck did jimmy come down that ladder