The 5 Tools that went viral in 2023 | Woodworking tools 2023

The 5 Tools that went viral in 2023 | Woodworking tools 2023
✅✅ Make 16,000 Projects With Step By Step Plans ...even if you don't have a large workshop or expensive tools!
➡️ Get instant access to 16,000 projects now bit.ly/16000Plans-Projects
✅✅ How to launch your own Woodworking Business for under $1000 and Make until $150,000 a yers.
➡️Step-by-step guide bit.ly/woodprofits-joineryfor...
Our channel intends to always bring the best content about woodworking for beginners, as well as diy, craft ideas. We do our best to have new videos weekly. So not to miss any news, subscribe to our channel, activate the bell for all notifications.
➡️Be part of our Whatsapp Channel:
✅whatsapp.com/channel/0029Va5y...
➡️Page on Facebook:
✅ / diycraftwoodworking
➡️Facebook group:
✅ / woodworkingideasforbeg...
Link Video: • The 5 Tools that went ...
____________________________________________________________________________
#Woodworking #woodworkingforbeginners #woodworkingvideos

[@chuckmarch5552]

I really appreciate your inginuity and patience. Some of us are short on these. Fifty years ago when i got into woodworking , i had nothing and made $530/mo takehome. I built a table saw from a pool pump and a disk sander from a garbage disposal. I got a cheap router and a finish sander from Sears. With these tools i built oak cabinets for my kitchen from salvaged railroad dunnage and pallets. Now i have a shop full of tools including a Sawstop. Ive bought 9 houses over the years and remodled them all. I guess what im saying is that we live in a time of lots of cheap alternatives. However quality still costs more up front and less in the long run. Everyone has to start somewhere with what they can afford and what is available in their community. Dont judge people by your own situation everyone is doing the best they can with what they have . Keep up the good work. Lots of people are in the same place in their life and need your fresh perspective on whats possible. God bless

[@famofartists]

you are a legend with experience which you can share with the youtube community

[@JohnDlugosz]

My grandfather, who died when I was very young so I never got to know him, reportedly built a vacation lake house out of salvaged and found materials. He even reused nails he pulled out of salvaged boards. I never thought about what he must have done for tools. I expect that anything beyond basic hand tools from Sears would have been site-built.

[@charlesrodriguez8310]

Magnifique des outils simples faciles à faire merci beaucoup 😊

[@alexplorer]

An alternative to #3 is a motorcycle jack. You can get one for well under $100 (mine was $65). It supports up 500kg (1100 lbs). I use it for much the same as shown here (supporting material overhanging other tools)... and a lot more (e.g., holding up one end up a pipe while I'm at the other; I recently used to apply constant pressure from below to bend some PVC while I used the heat gun and pulled from above). The deck on mine is about 14.4" x 9". The height ranges from 3.7" to 13.8". Comes with a wrench, but I usually have a 7/8" socket on the drill to go faster, depending on the job.

[@henryrossouw930]

Simple build but effective

[@pandrews45]

I appreciate his cleverness. Not only is he training beginners on basic skills and techniques, he is expanding the versatility of a couple basic tools into a whole shop of tools and broadening their thinking to create even more for thsmselves when they need a tool they can't afford, can't find, or only need for specific job, not something you'd want to spend on for one time use. Furthermore, creating them out of bits of wood, probable off cuts or waste from previous work.

[@JohnHungerfordJr]

You have great talent and ideas would saves money then expensive equipment in wood shop. Small things will come in handy when needed. Thank you for showing and I’ll be copying ideas that would be very useful for my woodworking.

[@user-wq9bk1th7s]

Χρόνια πολλά!!!!ευτυχισμένο το νέο έτος!!!!!με υγεία!!!!είσαι ΦΑΝΤΑΣΤΙΚΌΣ!!!!!ΜΠΡΆΒΟ ΣΟΥ!!!!!ΑΠΌ ΕΛΛΆΔΑ!!!!!🇬🇷🇬🇷🇬🇷❤️🧿❤️

[@ewertonlimamacedo8310]

Parabéns meu amigo, genial. Poderia me dizer por favor, qual o comprimento dos trilhos que usa?

[@dlsb1234]

Mais um excelente trabalho realizado. Parabéns pelo empenho e dedicação. Sucesso no canal...

[@WillWoodDiywoodworking]

Thanks for watching my friend 😉👍🙏

[@alexroca3664]

Muy muy buen trabajo Antonio, gracias, funciona de lujo amigo.

[@robeccs]

Thank you for sharing!👍🏽🍻✌🏽

[@WillWoodDiywoodworking]

😉👍🙏🙏

[@AnibalDeHaro]

Extraordinariamente valioso para cualquier aficionado y/o profesional de la madera...!!!. Gracias mil por este video tutorial de herramientas hechas en nuestro taller , gracias a tì......!!!

[@WillWoodDiywoodworking]

Thanks for watching my friend 😉👍🙏

[@jerrybailey5797]

Interesting stuff , l like the drill stand , good project for a wood working beginner 👍

[@Arte-Silva-02]

I work with steel. To be more precise, I work with blade sharpening. It is in moments like this, when I see a human being demonstrating the beautiful and wonderful creative capacity of the species, that I still have hope that this wonderful planet will not be dominated by ignorant people. Not without a fight, not without intelligent and creative resistance, even if we are few. My sincere compliments, and true congratulations on your demonstration of talent!!! Congratulations!!! (Sent here from Brazil)

[@everythingtv1910]

I like this video thank you for sharing it to view ans i wish your channel more successful

[@joilsonsantos8009]

CANAL NOTA 10!

[@totiv.7584]

👍 perfect ✌️ thank you 🤜🤛

[@WillWoodDiywoodworking]

😉👍🙏🙏

[@user-uw1xg6gn3m]

Константин, с большим удовольствием смотрю все Ваши видео. Вы молодчина! Всегда есть, что у Вас подчерпнуть. Сейчас зочу поинтересоваться, в какой программе Вы создаете свои проэкты? В частности стеллаж в гараже. Платная эта программа или нет?

[@arnaldosalinas-pg9wm]

Es increible las herramientas que podemos hacer con la ayuda de estos ingeniosos compañeros

[@Ellie92198]

Harikasın, eline emeğine sağlık 😊

[@helenatyukodi5227]

Cool creativity!

[@WillWoodDiywoodworking]

😉👍🙏🎉

[@evgend1608]

С НОВЫМ ГОДОМ! Спасибо! за видосы

[@Astilafauzymeubel]

👏👏👏 Amazing 👌

[@markramsell454]

That was fun useful stuff.

[@macshipley1425]

Great ideas, one suggestion, for your safety, some day you may have a finger or hand injury around your table saw or hand tools. Please use push blocks and other standard safety practices. :)

[@jagdishbilgi1518]

Great ideas, wonderful presentation.

[@teeebeee3946]

If I was going to put this mush effort into this I think I would use hard wood and make dove tails on my table saw.

[@user-qg4ul5bl8f]

СУПЕР!!! БЛАГОДАРЮ.

[@thomasswenddal772]

Good Stuff. I'm in!

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼

[@WillWoodDiywoodworking]

👍😉🙏🎉🎉

[@NuTranThi-qq2sn]

I​@@WillWoodDiywoodworking

[@thegreatestever4887]

That's the shit bro, I really like the ideas that you had presented in your time-lapse silent tutorial, I could understand your detail easily because we don't need talking tutorials explaining how and what they're doing like they're the first people to discover shit and I don't want to hear all that and you just got on with it. Awesome bro I like the last one with the drill.

[@arsh3030]

ممتاز جداً جداً جداً ❤

[@izzasplantworld4319]

Hi very nice🎉

[@WillWoodDiywoodworking]

😉👍🙏🎉🎉

[@dada-mw5yi]

you might want to show he finish product 1st then how to build it. I would help us to see the overall project.

[@user-fn6pi7by4u]

Bravo...😊😊😊

[@sunnyray7819]

Good job!

[@salahabdallah1395]

ممتاز

[@Bladimir-is1io]

Падписался и лайк за тваи отличные поделки ..возьму на воружения 😂🎉❤

[@alimoharek1027]

Nice works

[@WillWoodDiywoodworking]

😉👍

[@natasharose6889]

Some of these were really creative and could be utilized daily in the shop. Ignore the haters, they're always gonna hate.

[@arnulfoacevedosoto7956]

Cómo hago para comprar el libro de los 16.000 planos de la carpintería si vivo en colombia

[@myWOODwork---]

Good!!!

[@WillWoodDiywoodworking]

Thanks

[@samuelcruz9258]

I take the last one .

[@Miguel-kj9bo]

Para hacer herramientas tan simples debes de tener herramienta bastante cara

[@fenixalorca3143]

😁

[@petermartens5547]

super👍

[@user-sb8mh9zy9p]

Подписался! Молодец!

[@webanut]

Последнее наверное самое полезно в быту. :)

[@user-gl6qq6vy2n]

Использовать болгарку в качестве циркулярки , это идиотизм. При чем очень опасный. Но делать циркулярку из болгарки при наличии стационарной пилы...Для этой болезни название еще придумать надо

[@user-jz5gz5zs4x]

😊

[@dukestt5436]

In he first one, if you already had a router why did you make the T slots in the way that you did. A video for videos sake.

[@humbertosasttre321]

todos esta perfecto oar nosotros que vamos iniciando solo que cuales serian las medidas

[@somiyr]

Хочу ответить сразу всем диванным критикам - критиковать имеет право только тот, кто сам может делать что-то подобное, а комментаторы типа "а нахрена, если он стОит 12 евро" - эти видео не для вас, если у вас руки растут прямо из седалищного места. Всегда инструмент, созданный своими руками не на "скорую руку", а с любовью и старанием особо ценен для создателя. Занимаюсь подобным творчеством иногда не из необходимости, а просто ради творчества. сейчас попалась на глаза сгоревшая мощная дрель с передаточным отношением 1:10, решил сделать сверлильный станок-гибрид из редуктора этой дрели и двигателя от "стиралки, причём с одной стороны двигателя редуктор на 138 оборотов, а с другой патрон напрямую с вала двигателя на 1380 оборотов..Эта конструкция будет быстро разворачиваться на 180 градусов при необходимости, а это видео подсказало мне как просто сделать подвижную головку. У меня есть три шуруповёрта, пять дрелей, заводской сверлильный станок и тем не менее, новый станочек найдёт себе применение. Парень просто молодец, и руки откуда надо растут, и мозг развитый. Удачи тебе и побольше таких видео для адекватных людей. I want to answer all the couch critics at once - only those who can do something like this themselves have the right to criticize, and commentators like "what the fuck if it costs 12 euros" - these videos are not for you if your hands grow right out of the seat. Always a tool created with your own hands, not in a hurry, but with love and diligence, is especially valuable for the creator. Sometimes I do this kind of work not out of necessity, but just for the sake of creativity. now I caught sight of a burnt-out powerful drill with a gear ratio of 1:10, I decided to make a drilling machine-a hybrid of the gearbox of this drill and the engine from the "washing machine, and on one side of the engine there is a 138 rpm gearbox, and on the other a cartridge directly from the engine shaft at 1380 rpm..This design will quickly rotate 180 degrees if necessary, and this video told me how easy it is to make a movable head. I have three screwdrivers, five drills, a factory drilling machine, and nevertheless, a new machine will find a use for itself. The guy is just great, and his hands are growing from where they need to, and his brain is developed. Good luck to you and more such videos for adequate people.

[@FatLittleOldLady]

WOW! I gotta watch that again! Beautiful!

[@user-me3ew4cd6g]

Интересно среди кого это завирусилось, т.е. кому эти "инструменты" могли вообще понравиться. 😏

[@vincentroux1510]

Those plywood and softwood jig will quickly become loose and unprecise. Sometimes it's better practising free hand acuracy than spending time and money building jigs you won't use within few uses.

[@Artesano6908]

you are good

[@philipsouza5425]

yep, saw the scissor lift and dropped what i was doing for the night to build one..Dialeddddd....now on to the drill press~ :) thanks homie!

[@kent....]

Это видео лишь показывает, что сделать своими руками можно любую вещь если есть нужные инструменты, можно также усовершенствовать вещи бесконечно. Но в итоге вы приходите лишь к выводу о том, чего у вас больше - времени или денег... Но нет ничего приятнее чем сделать чтото своими руками...

[@regibson23]

You know they make t slot router bits right?

[@Se-La-Vi]

1 шаблон фрезерньій купил 4 года назад - надежньій 2 изобрел ручную циркулярку 3 столик поднимающийся тоже есть в продаже 4 торцовка так себе - где позиционирование перпендикулярности диска? 5 стойка для дрели - та же проблема вертикальности. Цена в магазине приемлимая

[@user-gl4xi8lk7w]

и это с учётом того что у чела всё есть ,

[@user-vl9mh8dv1l]

Я конечно как Доктор Дью говорить не умею, я скажу вежливо: КПД всех самоделок маленькое, да и качество сомнительное, если челу просто нечем заняться, тогда да, пусть конструирует.

[@user-dh3uq4yh2j]

8:08 пропил дугой. В целом понятен уровень изобретений.

[@WillWoodDiywoodworking]

Thanks for watching 😉👍🙏

[@Herz_aus_holz]

👍

[@user-jx3tx9pp7f]

Boy, are you an accident waiting to happen. When you were sawing I clearly saw you standing right in line with the saw blade. Which means that if there was a kickback, the kickbsck would hit you right in the gut. And you would hurt. Never, ever, stand in line with the blade. I was taught that in school shop in the 10th grade, the first year we were allowed to use power tools. The teacher explained kickback, then, standing well out of line of the blade, caused a kickback. That piece of wood slammed into the wall very hard. That was in about 1949, and I still recall it. I have never had a kickback, because I learned how to prevent them, but still stand out of line of a running saw blade.

[@sw1sha442]

"how to turn your angle grinder into shittier more dangerous versions of existing tools"

[@VictorZucchini]

Why is it dangerous? I’m not being funny, just trying to avoid losing fingers, eyes, and other body parts that I grew so fond of and became quite attached to 😅

[@homusnovus]

la segunda herramienta es una copia de una herramienta multiuso marca Dremel

[@wesir427]

You know there's router bits for making T slots right?

[@BigHenFor]

You might have the money, he may not.

[@russkaufmann6100]

So what are the five tools?

[@user-eu3hn2cn1s]

Something like that should be used to pierce sheets of paper and even cardboard, right? 😆😝😆😝😆😝

[@holzhandwerklifehacksdiyto1537]

Hammer

[@su-mu]

28:29 round 2

[@paulomessora1734]

Vc nao mostra as medidas nao adianta nada ver pra depois tentar fazer

[@razvantrece1501]

😊😊

[@grumblycurmudgeon]

Define "went viral."

[@jimthesoundman8641]

Went viral in his mind.

[@user-me3ew4cd6g]

Вызывает тошноту и стойкое отвращение к подобным видео. 😏

[@donamir3652]

🧠👌👍

[@su-mu]

28:29

[@user-qg4ul5bl8f]

СПАСИБО ВАМ ЗА ТРУД, У ВАС ЗОЛОТЫЕ РУКИ.

[@gusliby]

)) when you press - the center goes out 3-5 mm ))) no thanks )))

[@pierrefiore6933]

where do you get that plywood? all those layers? I counted 12, the most I've seen is 5

[@jpopperman9369]

Lol I was looking at that too, probably just got lucky somewhere 😂

[@buggsy5]

Look for Baltic Birch plywood.

[@58kubinka]

Нахрена....??? Если он стоит 12€....)))))

[@thinkforyourself7262]

Buy a pillar drill 🤷🏻‍♂️

[@user-yq6ds4et5p]

Стойка для дрели обойдется дешевле этой хлипкой, люфтующей самоделки. Если смог оборудовать полнокровный столярный цех, то купи уж сверлильный станок. А сговнякал ты хлипкую игрушку.

[@shop970]

The nonsense is thick here. What's the meaning of a tool? It's why proper application and design are in place . But you want this B.S. instead. It's impractical nonsense for those that can't use ( a) tool correctly.

[@johngardiner8847]

Not too swift…routing MDF

[@user-willow9386]

27:39 handle link erorr?

[@raznyye_melochi]

помажем походит ))

[@daveturner7581]

A push stick would be safer than fingers on the table saw

[@user-fx9gv2pr3l]

При наличии таких станков и электроиструментов такую хреню делать??????

[@andrewdok3595]

В лучших традициях дендроферального ДиайВая. Всё на соплях и проволочках. Ни одно крепление Электроинструмента, не вызывает доверия. Ни по надёжности ни по точности, ни по возможности регулировки. И нафига тогда, а главное Зачем? наловчиться с 4й-5й попытки Этим сделать более менее точно? Так вручную за то же время получится так же. Суета ради суеты. Материалы и работа обойдутся в цену китайской поделки из пресованой металической стружки от дядюшки Ляо, в ближайшем хозмаге. Контент ради контента - неодобряю и негодую

[@chazz2009]

Okay, now I can jack up my EV when it catches on fire.. 😂😂😂😂

[@poor708]

[@sawingwoodtechnology]

Best

[@WillWoodDiywoodworking]

Thanks for watching 😉👍🙏

[@ednorigo3768]

Quem vai comemorar o oito de janeiro, são aqueles que se beneficiaram da fatídica data !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@user-cc8mj8yb4h]

Kittens

[@tomasgimenez4592]

Or you can also buy a jig available just for that very cheap

[@blindluck5734]

cat got your tongue? You obviously have audio capability because I can hear the machines running. Dry talking help to clarify things. Thanks.

[@kulkrafts3143]

Willwood, I appreciate quiet videos instead of someone lecturing none essentials. I watch at 2x speed anyways. Keep up the great work!

[@lafamillecarrington]

I would really appreciate an idea of what you are making. Otherwise - I'm not going to watch ...

[@Paul-mx2yj]

What a waste of time. Mine !!

[@user-ty7ms5mh9v]

КИН ДЗА ДЗА

[@user-fx9gv2pr3l]

Пздц!!!!! Сюжет №1! ДЛЯ ЧЕГО??????

[@uabpsab]

Viral ? I think not :D Pure BS