Wind Loading Analysis with SOLIDWORKS Simulation and Flow Simulation

This quick video shows how the FEA and CFD capabilities within SOLIDWORKS can be combined to perform a more realistic wind loading analysis. External airflow patterns are calculated with SOLIDWORKS Flow Simulation, and the resulting loads directly transferred to your stress analysis, no guesswork required.
For more information on SOLIDWORKS Simulation:
hawkridgesys.com/solidworks/simulation
For more information on SOLIDWORKS:
hawkridgesys.com/solidworks/3d-cad

[@hawkridgesystems]

Note: After solving the SOLIDWORKS Flow Simulation results it is necessary to "Export results to Simulation" from the pull-down menus Tools > Flow Simulation > Tools > Export Results to Simulation, in order to write the additional output data required for pulling the pressure maps into SOLIDWORKS Simulation FEA.

[@mikoajskoczylas3300]

It took me 5 hours to figure this out. I was just about to write a comment that without it it is impossible

[@goncalocoelho844]

Thank you for the video, I've been looking for something like this for a while.

[@johnhavenar798]

This is an excellent video. Very informative. Thanks.

[@inforobot2042]

Best channel on YT

[@durangulec8062]

Thank you so much for the video. I am wondering do you need to model the structure as shell or can you simply define a new material as well as defining assemblies and then simulate it with flow simulation?

[@KartikeyG]

very well explained. is it possible to get a free license?

[@alializadeh8195]

Thanx

[@chandrashekharpilli3296]

CAN U EXPLAIN AXIS POINT HOW TO SELECT

[@chetnaprajapati9483]

MY VERTICAL WIND MILL PROJECT DETAIL FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS AIR DANCITY 241 WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND HOW CALCULAT RPM HOW MUCH RPM GENARATE PLZ HELP

[@mantatrip9319]

740

[@wendellnoronha5699]

I did it exactly this way and it says there are no loads applied to the bod

[@hawkridgesystems]

It looks like there may have been a crucial step overlooked in this video, after the SOLIDWORKS Flow Simulation results are run it is necessary to "Export results to Simulation" through the tools menu. This writes some additional output information that is necessary for mapping the Flow Simulation results to a SOLIDWORKS Simulation FEA Relevant section of the help files: dshelp-embed.3ds.com/2023/english/UserGuide_HTML/mgchelp.htm#context=main&id=479&tag=id0c55fcc8-7c6e-487a-91d6-82105b3cf88c

[@wendellnoronha5699]

@@hawkridgesystems thank you my friend!