Windmaster 750kw Wind Turbines For Sale - 6 units immediately available

www.mwps.world...
6 used WindMaster 750kW (50hz) wind turbines
Can ship anywhere in the world
Only €65,000 EUR ($92,000 USD) per unit! -As is -- Where is
Or €110,000 EUR ($156,000 USD) refurbished according to WindMaster 5 year specification schedule (Schedule provided on request)
WindMaster 750-EGModel : 750 EG -- 750KW
Year of build : 1998
Price : €65,000 EUR ($92,000 USD)
Number of units available: 6 units left at this price
Blades are fully refubished and newly balanced!
Current Location: Eastern Europe
Already dismantled and ready to ship!
All 6 turbines can be delivered in refurbished condition.
The wind turbines come complete for on-grid operation
Don't miss this amazing offer!
This is a one time opportunity for any buyer to either up your existing wind farm by a massive 6.5MW or for the construction of a new wind farm project for a fraction (25%) of the price which a farm would cost if equipped with brand new turbines.
WindMaster 750-E
Number of turbines: 6 available immediately
For more details, see: www.mywindpower... or call [phone]
Generator capacity: 750 kW
Shaft level: 48,2 m
Working range: 4,5-19 m/s
750 kWe at: 13 m/s
Year of commissioning : 1998
Yearly production at 6 m/s* : 1.150.000 kWh/year/turbine**
Yearly production at 7 m/s* : 1.684.000 kWh/year/turbine**
Yearly production at 8 m/s* : 2.184.000 kWh/year/turbine**
*10 min average values, according IEA standards on hub (shaft) height
** Weibull factor k=2; 100% availability
Rotor blades and rotor
Number of blades : 2
Material: wood-epoxy-laminate
Tip speed: 73 m/s
Blade length: 20,268 m
Rotation speed: 32 rpm
Rotor surface: 1.480 m²
Generator
Make: AEG or ABB
Rating: 110% of 750 kW continuously ( 1000kW max.)
Type: Squirrel cage asynchronous generator 4 pole
Compensation: 125 kVAR fixed.
Rotation speed: 1.509 rpm
Protection class: IP55
Safety device: 3 PTC's
Voltage: 660 V
Connection to grid: First connection at speed of 1495 rpm via resistors, next step directly connected, 2 circuit breakers, star connected
Gear box
Make: Flender AG, Germany or Jahnel Kesterman
System: parallel, 3- stagesTransmission: 1: 46,5Oil contents: 320LLubrication: electrical pump
Yaw system Type: free yaw, active yaw back-up.
Motors: 2 hydraulic low speed motors each with gear drive,
Nacelle support : 4-piont ball bearing on toothed wheel
Cable twist control: sensor + computer
Power supply: hydrolic unit A, 3 kW
Angle control: wind vane
Brake system
Type: hydraulically activated disc brake at low speed shaft
Disc diameter: 1,6 m
Numbers of callipers:8
Normal brake time: 4 sec
Activation: overspeed sensors
Power supply: hydraulic Unit A; 3 kW
Pitch system
Type: crank mechanism inside hub: pitch shaft through hollow mainshaft: axial bearing and hydraulic cylinder
Power supply : Hydraulic Unit B, 5,5 kW
Safety system : fail-safe emergency valves and accumulator system
Control system: digital stroke transducer and computer controlled valve
Tower
Tower height: 47m -- 1 section (can be cut for easier transportation)
Construction: 1 conic round part
Top part with noise damper and flange.
Foundation bolds: 2×30 pieces, M42; 100 cm long, bolded in 40mm steel ring in steel armoured concrete foundation.
Bold circles: 2,8 m/2,4 mPlatforms: 4; on 3m, 6m, 23m, 43m
Top platform: oil tight
Bottom platforms: fire tight
Cables: carefully tagged and fixed over cable reel in bottom part of tower
Ladders: equipped with safety rail
Noise
Weights
Rotor: 12.800 kg
Rotor blades: 2.500 kgTurbine head excluding rotor: 35.700 kg
Tower: 40.500 kgTotal weight installed: 89.000 kg
Control
Power control: active pitch control
Breaking system: active pitch control and disk break on main shaft.Microprocessor: Mitsubishi
±2,5 and ± 5% off load tap changer
HV Bushings: Elastimold type M 400 AR-3/jLV bushings: DIN 1/1000 A directly connected to cables.Each windmill connected to central distribution rail.Tower to be hoisted over transformer.
Documentations Available
Full Service History
Electrical drawings
Mechanical construction drawings
Maintenance manuals
Log books

Can ship anywhere in the world
Only €65,000 EUR ($92,000 USD) per unit! As is -- Where is
Or €110,000 EUR ($156,000 USD) refurbished according to WindMaster 5 year specification schedule (Schedule provided on request)
Contact us immediately not to miss out!!!!
Note: Seller can assist and arrange shipping.
Viewings will only be arranged if signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will not be accomodated!
Disclaimers:
Above technical data is subject to technical alterations, errors and omissions
The MWPS legacy Marketplace for used wind turbines can still be found at: www.mywindpower...

[@rodstartube]

shipping is free

[@shannaheckler1933]

My works too. I used Inplix handbooks and build it without any problems.