I like that Ox Tool shorts are 8 min, not 30 sec like everyone else's ; )
@EitriBrokkr3 жыл бұрын
I like that they are not actual shorts, that is the most annoying format out there
@kevCarrico3 жыл бұрын
wow - i love being able to see your drawing and writing from your side of the bench!
@daviasdf3 жыл бұрын
I appreciate the Tool quote 🤘 (in addition to the fine tool making ;)
@nefariousyawn3 жыл бұрын
This video had everything, it even inspired me to put some Tool on my playlist for old times sake.
@ew43953 жыл бұрын
@@nefariousyawn Fine decision sir. I am not adding it to mine, TooL is my play list.
@daviasdf2 жыл бұрын
@@ew4395 Same 😁
@bcbloc023 жыл бұрын
The makers mark was a heck of an added touch
@arthurmiller46503 жыл бұрын
Moving and more videos? You're too good!
@jasonh3109 Жыл бұрын
I sure do love all the KZbin content out there today, but I really miss an actual machinist making KZbin videos. Now it’s all KZbinrs who make machining videos. There’s a place for both, but hot damn I sure do love your content. And always will. 👍🏾 thanks Tom.
@skiphill92 жыл бұрын
You must have been in the same mechanical drawing classes as I was back in the early 70's!
@jonwatte42932 жыл бұрын
Nice video! A little bit of everything with s whirlwind tour.
@Tezza1203 жыл бұрын
Ox tools listening to Tool. Love it :)
@canberradogfarts3 жыл бұрын
Pure artistry as always. Would love to get that beauty to aid the Great Escape.
@martyscncgarage52753 жыл бұрын
Nice work Tom!
@windyhillfoundry59403 жыл бұрын
Tom, outstanding! Of all the ones that bought one, yours is the most innovative by far. Thanks for sharing and hope this makes someone very happy👍
@oxtoolco3 жыл бұрын
Hey Clark. Glad you liked it. That is some fine grade cast iron you do. The casting was superb. Cheers, Tom
@arkarkiis29413 жыл бұрын
True American craftmans ☝️🙏😇
@windyhillfoundry59403 жыл бұрын
@@oxtoolco thanks for the compliment Tom👍
@melgross3 жыл бұрын
@@oxtoolco you asked what we think of the tool you made out of it. I think I would be interested in buying one. I’m not up to making one right now.
@toddcumberland1323 жыл бұрын
I love this. Always a pleasure to see your work product.
@OldIronMachineWorks3 жыл бұрын
Great Job Tom, Cool video
@Jeremy-zi6pi3 жыл бұрын
Beauty!! That will make someone's tool box very happy!
@billquillin19523 жыл бұрын
Nice work!!
@metalheartmachine2 жыл бұрын
Great work.
@ROBRENZ2 жыл бұрын
Very nicely done Tom! But where is the insulated handle? ATB Robin
@captainmidnite932 жыл бұрын
A friend of mine was the band's (Tool) road manager, they went through a period where they all carried small ball peen hammers and would bop each other at unsuspecting moments. After a while the damage count rolled up to a point where offending objects had to be confiscated....
@dangunit693 жыл бұрын
Nice job Tom, where do I sign up for the raffle? ;}
@TraditionalToolworks3 жыл бұрын
I have an old Federal that is similar, but smaller. It has a knife edge on the front like you did, possibly you have even seen them, it was one of the more common designs in days of lore.
@jameswalker83383 жыл бұрын
Nice, short and tasty. A great little piece of short bread. ;-)
@benpeterson98353 жыл бұрын
No guard no gloves ….I like your style lol . This is true engineering
@cardenben3 жыл бұрын
I would have liked to see more of the grinding process, but other than that, great video as always!
@railgap3 жыл бұрын
You have good taste in bands, as well as tools.
@Poksutin3 жыл бұрын
i sure need one. just cant make one yet...needing bigger shop to get milling machine first..and maybe surface grinder too...nice job tom.greetings from finland...btw my name is tomi :D
@markanderson57773 жыл бұрын
Tom's a TOOL fan! Knew I liked this guy for some reason,,,
@MikeBramm3 жыл бұрын
Another cool Ox Tool.
@fredio543 жыл бұрын
Where is the link to the raffle, Tom??? :-D Would kill to own a special piece of your work.
@kenmcclure45623 жыл бұрын
That cool
@RCDinsmore3 жыл бұрын
I like the video format. Would be helpful for newbs like me if you talked a little about how and why you would use this.
@oxtoolco3 жыл бұрын
That will happen in the long format. Much more detail. Cheers. Tom
@pontoonrob79483 жыл бұрын
So, how does one buy that? Or win the raffle? Buy it now price?
@richardellis31413 жыл бұрын
nice ..
@MaturePatriot3 жыл бұрын
Great video. How do I get a raffle ticket?
@e75403 жыл бұрын
What CAD software were you using in the beginning? Never seen that before.
@Curlyim23 жыл бұрын
Looks like AvECad to me
@jamesrandalls69143 жыл бұрын
awesome
@cokesucks3 жыл бұрын
I'm drooling over this.
@Saki6303 жыл бұрын
nice
@4SafetyTraining3 жыл бұрын
How does your brain work.... just HS that's cool.
@HansWeberHimself3 жыл бұрын
Finally, I just have to ask because I do not know: What not do secret government agency is Tom working for? I’m a German immigrant to to the US so I’m not we’ll versed in Gobrmnt agencies.
@SuperAWaC3 жыл бұрын
Lawrence Berkeley National Lab
@HansWeberHimself3 жыл бұрын
@@SuperAWaC Thank you!
@TheManWith2FirstName3 жыл бұрын
This video has all the Ox Tools traits: artistry, silicon bronze and lapping. Can’t wait till the full version comes out.
@chrischtea3 жыл бұрын
There was however no filing. I am disappoint! :P
@truckguy66663 жыл бұрын
That verse comes in at one of the greatest hair raising crescendos in all of music.
@ericcommarato77273 жыл бұрын
If you ever pass through Mississippi to visit Windy Hill, stop by my shop, I’m only 35 miles away! Many talk smack about Mississippi, but it’s quite a beautiful state, the best kept secret in the country. The nicest, smartest, most hospitable folks you will ever meet, and we are tough as nails.
@GregsGarage2 жыл бұрын
The Tool quote at the end got me! Now I know you're one of my people!!!
@52Ford3 жыл бұрын
Awesome! Best of luck on your move to the new shop. Being on your own land like that is a great feeling. I commented this on a previous video, but REALLY get a tractor or a skidsteer. They make property maintenance SO much easier. You wouldn't need a big tractor, a compact (not sub-compact) would be PLENTY for most stuff.
@jameslmorehead2 жыл бұрын
Something along the lines of a Kubota L40 series would do him justice. Don't be brand specific. Just find the easiest dealership to get to and find a model that fits your needs. A good relationship with a great dealer is more important than brand loyalty.
@52Ford2 жыл бұрын
@@jameslmorehead Right. If going for a newer machine, definitely pay attention to what your local dealers are like. If it's something older, just focus on parts availability and easy of maintenance. amenities that the new stuff has, but it's simple and generally very reliable. My experience with new equipment is that most of your problems are going to be emissions or otherwise electrical related and if they aren't, it's something needs to be replaced, not just repaired.
@WilliamTMusil3 жыл бұрын
Ooh
@JaapGrootveld3 жыл бұрын
Hi Tom, The one that is surviving is not alive. he sees the universe as hostile. Unaware of being the universe, he lives in the small world of his personality. An open mind has given way to gullibility. Again and again he bumps his head against reality. For the universe wants to awaken him. Greatings, Jaap.
@bcbloc023 жыл бұрын
The makers mark was a heck of an added touch!
@mike-carrigan3 жыл бұрын
That's really cool. I never saw a video finishing up the composite square, what happened to it?
@dansharpie3 жыл бұрын
for an engineer you are precise, an Angel is a messenger from God ete ete, The universe is home, God and the Devil may be hostile towards you directly or via a human Angel Demon or Spirit, Jesus is the personal link to God who created earth out of love for us, i hope Tom you can enjoy home and relate to other humans and God himself regards Dan.
@bartylobethal80893 жыл бұрын
Fine tool making capped with fine Tool quotes. Awesome start to my day off. I tips me coffee at you Gov.
@georgem66513 жыл бұрын
Oh, you tease! Long version when?!
@juansimon58023 жыл бұрын
i want it now!wish i had the time to make one. awesome video as always
@eformance3 жыл бұрын
Perhaps auctioning it off would help you in your Epic Egress?
@MrRvandeW3 жыл бұрын
Excellent format Tom and nicely edited down. gonna listen to some Tool in the shed now.
@dob20303 жыл бұрын
You have amazing technology.~~It's so touching~ Subscribe and like~ Even an alarm!
@wheelieking713 жыл бұрын
Wait, wait, wait a minute..........CNC? Did you get the Makino running and not share?! Us CNC guys need to know.
@oxtoolco3 жыл бұрын
Been using it for a while now. Apparently somebody has not been watching my videos..... All the best. Tom
@wheelieking712 жыл бұрын
@@oxtoolco to be honest you quit popping up in my feed. I had to go find you. I was still subscribed. And after I watched one vid, there you were in my feed again. Stupid algorithms! LOL. I am hoping you do a bunch of videos on outfitting your new shop. Those are some of my favorites. I do all my own utilities, and well, I do all my own everything. So I always find it fun to see how others do it. To date my all-time favorite "series" on you tube was Steve Summers shop rehab. I loved every second of the amazing work that he did.
@PaulSteMarie3 жыл бұрын
Great video format! Low on the talk, high on the machining. What's that flat bar made out of? Hot roll?
@componenx3 жыл бұрын
Wow, now I have to ask myself- Do I need one? The truth is no, but it's so cool I might have to build one anyway! Just ordered one of the epic Tees and wish I could help with the move (Sunnyvale isn't that far!)
@acraftman28233 жыл бұрын
Very nice , see ya in Arizona Bay eh!
@RRINTHESHOP3 жыл бұрын
Nice project.
@CraigLYoung3 жыл бұрын
Thanks for sharing!
@paulwomack58663 жыл бұрын
OK. I watched. I enjoyed. I learnt stuff. But despite watching "machinist youtube" for 4 years (ABom 79, Rob Renzo, Keith Rucker, Oxtoolco, Old Tony) I have no idea what an indicating square is. Can you help me (and others like me) ?
@scrout3 жыл бұрын
8 min...man, I am having some bad Oxtools withdrawal symptoms....
@andrewevans16583 жыл бұрын
Great video Tom!
@bulletproofpepper22 жыл бұрын
Wow!!! Thanks for sharing! That’s crazy!!! Crazy great!!
@winter-survivor3 жыл бұрын
Good video, but terrible audio experience. Please consider lower the machine noise parts when editing the video, it's not that difficult.
@adamsblanchard8362 жыл бұрын
Careful....you don't want to attract Taneleer's bounty hunters.
@davidsnyder20002 жыл бұрын
Boy you sure can freehand some isometric drawings👍 Not to mention the curves and ellipses 😄 pretty cool
@HybridiHippo3 жыл бұрын
No Mr.Bozo to this square 🤗 nice one in each detail
@Miseries_Company2 жыл бұрын
Lol you draw free hand really well! I always start out with rulers and drawing tools, but end up free handing and bozo the thing.
@jeffanderson16533 жыл бұрын
How do I buy a ticket? That’s cool
@nocturnhabeo3 жыл бұрын
Gimme my precision fix! Snnnniiiiiffff Mmmmmm smells like cutting oil and hot metal.
@bboomer7th3 жыл бұрын
‘Credulous at best.’ I’m still trying to parse that.
@donmittlestaedt11173 жыл бұрын
Nice job! But, I like the video because it was brief, and to the point.
@c0mputer3 жыл бұрын
Im getting a little vertigo from the initial camera angle! Crazy, haha
@wallbawden55113 жыл бұрын
i'm in where do we start be nice to see an OX tool in my box in Australia
@Xtank53 жыл бұрын
1:24 I jumped because as a headphone user, it sounded like someone had just come up behind me and started talking right close to my ear. 😆 I was not expecting talking so early in the video.
@iteerrex81663 жыл бұрын
Lol, that reminds me of one time we were in a movie theater, watching this dangers seen. Everybody knew where danger was, which was to the right and behind the guy. And as the sound came from the back corner speaker, this one guys in our row, leaned away and said, OHHH $##@$& 😂🤣
@theundergroundesd3 жыл бұрын
nice work.
@ray98523 жыл бұрын
I need one, and I don't even have a machine shop
@danapatelzick5943 жыл бұрын
Cool, what was the dial indicator?
@bfx81852 жыл бұрын
WOW
@ashreid203 жыл бұрын
'happy cut', the bob ross of cut's
@maximiliankrug10113 жыл бұрын
I love your precision 👍
@JJ-jv1gu3 жыл бұрын
Ox, u want better pipe dope
@michaelmiller55663 жыл бұрын
Where's the raffle?
@mfletch3923 жыл бұрын
Nice just nice
@BleuJurassic3 жыл бұрын
tom cad rocks
@pitu72ger3 жыл бұрын
Beautiful
@patrickmazzone90663 жыл бұрын
Excellent
@gertskjlstrup18043 жыл бұрын
It´s a liky liky :-)
@dizzolve3 жыл бұрын
Awesome
@TheTreegodfather3 жыл бұрын
Niiiiiiiiiiiiice 💗
@PeterWMeek3 жыл бұрын
Very cool design. It would let you calculate exactly how much to take off one edge of the bottom of a workpiece to get the side vertical. Please remember to set the language of your videos to "English" so that KZbin's wonderful autocaptioning will work for us deaf folks.
@jonsworkshop3 жыл бұрын
Nicely done Tom, very nice piece of kit. Great looking casting to start with too. Cheers, Jon
@kundeleczek13 жыл бұрын
6:30 is that granite lapping plate? Why no grooves on that plate?
@oxtoolco3 жыл бұрын
Those lapping plates are diamond impregnated hard anodized aluminum mad by Ablap. Not super common but I do like them for small jobs like this. Cheers. Tom
@capnthepeafarmer3 жыл бұрын
Great work, Tom! Makes me want to build my own, or maybe I can win that raffle? Who knows 😂😂
@douro203 жыл бұрын
Are you going to have precision climate control at the new shop?