Wire Strippers

wire strippers, cable strippers - fast electrician tool
Buy it from Sparky Direct
See Link www.sparkydire...
A quick way to remove insulation from cable and wires -TPS Building wire up to 6mm.
CRESCENT SELF ADJUST
Features
Cuts and strips 24-10 AWG (0.2-6mm2 ) copper or aluminium wire
Crimps 22-10 AWG (0.5-6mm2 ) insulated & non-insulated terminals
Crimps 7-8mm ignition terminals
Benefits / Specifications
Used for stripping and cutting wire, crimping insulated and non-insulated terminals and crimping ignition terminals
Fine adjustments can be made to strip wire insulation smaller than AWG24 (0.2mm2) without cutting into the wire
Stopper for adjusting wire strip length (rotate stopper when stripper length is not required)
#electricalwholesaler,#sparkydirect,#electricalsupplies

[@maynardchitty8896]

A demo of the brass adjusting wheel situated near cutting jaws would've been good. I've twiddled it on mine and I'm unclear it's doing anything.

[@aronsportel7366]

Exact reason I came here lol, guess I can leave again

[@1N2themystic]

It would be nice to see the adjustment demonstrated.

[@ghffrsfygdhfjkjiysdz]

This was my 1st wire stripper bought for home use. What i can say is this: it works, especially it woks well on thicker gauge (16awg to 8awg) wire. Bottom line is this: 1. if you do not need to be very accurate with stripping, b/c you doing general house work, tool like this is enough. 2. If you are doing wiring which requires more accuracy and you are using thinner or stranded wire, (30awg to 18awg) get yourself a calibrated cutting stripper. 3. For extremely accurate stripping, and very thin wires (thinner than 26 awg), you will need a thermal stripper.

[@amitghosh6966]

It's not good for stripping two or three core double insulated flat or round cables used in various appliances like table fan, heaters, microwaves, Air-conditioners etc but only those Romex cables. It's only good for stripping single individual wires and that too we need to adjust the pressure knob sometimes trial and error else it damages some strands. I have personally used it made by another manufacturer and found it semi-automatic and not fully automatic and it should have been precalibrated so that the user need not do any adjustments while working!

[@taxicamel]

@@amitghosh6966 AGREED .....No demonstration with small gauge ...18, 20, 22, ....which this stripper is "supposed" to be able to do (see this noted on the handle) ......but it does a TERRIBLE JOB ON SMALL GAUGE!! .

[@imranh5395]

Thank you for not messing about. Short, to the point, concise! 👍🏼

[@taxicamel]

Only good for larger gauge wire. No demonstration with small gauge ...18, 20, 22, ....which this stripper is "supposed" to be able to do (see this noted on the handle) ......but it does a TERRIBLE JOB ON SMALL GAUGE!! .

[@fredacuneo5180]

Thanks for the video. I have the same tool just under a different name. It did not come with any instructions, just specs. I appreciate the work you put into this.

[@amitghosh6966]

While stripping the thinner double insulation two core cables it removes all insulation outside and inside. I think it's good for Romex type cables only not any other cables

[@chevy5137]

A lot of different companies make these same wire strippers, I actually have a set of Irwin ones that I got from Lowe's and they work great, they are some of the best wire strippers I've ever had!

[@MrGflan]

Do you happen to know what the plus minus circle does? What’s it’s purpose? Thanks

[@gortnewton4765]

Fast, efficient description of what we needed to know, thank you.

[@taxicamel]

No demonstration with small gauge ...18, 20, 22, ....which this stripper is "supposed" to be able to do (see this noted on the handle) ......but it does a TERRIBLE JOB ON SMALL GAUGE!! .

[@chevy5137]

I have the Irwin VIse-Grip version of these automatic wire strippers and they are amazing!

[@jamesdunham27]

I have the kincrome version of this tool. It's the best tool i own; It can strip the just outer insulation of ethernet cables and the individual ethernet wires without adjustment.

[@quaphan3334]

Best stripper design ever!!!

[@mistral55]

on offer in the UK for £7.99 as a Parkside Tool with this week. with a box of mixed connectors / Fabulous quality and a 3 year warranty..

[@ahsankhattak4263]

KZbin recommend this video to me after 8 years

[@bittukhan5817]

Same

[@KAZEX1]

Same

[@SolarizeYourLife]

Great for multi wire cable, but I don't like when doing individual wire, it damages the insulation too much for me....and sometimes strips from grip side instead of 'cutter' side...

[@hamzagarmaje7898]

I am looking for a job in the field of electricity with good experience in this field since my young age and I work in it and I love it very much

[@dotmatrixmoe]

Quite young myself. I seek to be an electrical engineer.

[@hamzagarmaje7898]

@@dotmatrixmoe We talk in private

[@soulie12000]

Crescent has allways made good tools

[@kaitlinbonds7846]

great demonstration and narrator, LOVE the accent

[@simonklar3393]

Everyone loves our accent 😊💘🇦🇺

[@claudineioliveira1248]

I Love you

[@atifkhan2231]

Hah

[@gsedits8637]

Super

[@atifkhan2231]

I miss you

[@ladychiefretireddiy2025]

Thanks for this video. It was just what I needed since I am an amateur do-it-yourself person. Good info.

[@apprentix]

I wish I had seen this video before. This is an awesome tool. Thank you very much!

[@user-rb3gs7uf1z]

यह मशीन चहीये मैं भी एक चाहते है और कुछ नहीं तो कम से कम नः बता दो

[@vintagewolf1085]

Thank You For This Tutorial I Hope I Will Pass My Test Later

[@marcelasilva6367]

You try to give the video more brightness it will be great if you do

[@arun_thakur567]

Perfect 3 AM video

[@jayktee96]

I wish that we had t/e cable like that instead of having to put sleeving over the bare earth wire.

[@indioflechudo6221]

Excellent for electricians. but is huge for electronics work.

[@MrDuderivers]

I still own a pair, but after 2 years of heavy trade use ,stripping wires from 1.5 mm to 4 mm, its now pretty clapped out. I don't use anymore, because the jolt the tool gives when the insulation breaks free from the conductor, causes RSI in my wrist. Other than that they lasted longer then i thought.

[@filippoud]

It does damage the insulation in bigger cable sizes.

[@DMaTTh32]

It would have been nice if you showed how to use the nut adjustment

[@JjMn1000]

i have those and theyve worked for ever and would rate them ∞ stars out of 5

[@cornholiothefirst2018]

turn the tool around and marks will be on the cut side im not a lowly sparky i have 2 cert IVs above that grade

[@bryans8193]

Great video! Could you possibly make a video on how to use the various crimping methods with this tool?

[@anoopsingh46195]

Bryan S . I want the same wire stripper . Plz give me number

[@donaldterrado9645]

how much this.

[@donaldterrado9645]

how much this

[@birgaonbaaz5093]

Bryan S 7 hi

[@sharanshashi8049]

INR 2000 in India

[@TDC80]

Really useful short guide.

[@fablan3308]

Just bought mine mine doesn't work nowhere near as that my one is hit and miss think I will take it back and exchange it for another

[@neppy5]

nice video but wish you could have shown the crimping feature, I'm having trouble deciphering which size is which for the slots

[@Jaime_Estevez]

I guarantee you that you will take longer to order and buy, than abandon them in your toolbox, I seen many similar tools since 1986, and those who have bought this end up using regular strippers, I already forget how many years I have been using the same tool 82543 "craftsman", for sure more than 20 years ago, are lifetime warranty and I replace several times

[@countryhype9003]

I saw this video today and I bought one for myself

[@mitch6969123]

How is it cuttin threw all of the Insulation,.. don’t see anything touching it up top

[@ইলেকট্রিকবিডি]

God video electric wire cutting

[@demontagemontage]

شكرا لك

[@unogazzy84]

I tested a cheap one a couple of weeks ago and it just slipped all the time. This seems to have the same problem and over time it will worsen.

[@2driftlong]

If you look on aliexpress and ebay, you'll notice this crescent brand is just a chinese knock-off, the jaws aren't that sharp right from that start.

[@cesarmatias4759]

Legal muitíssimo pratico, ganha tempo pra manutenção.

[@tylersheehy3918]

i whold totally buy one that can cut a 8 gauge whier awg

[@sparkydirect]

Hi Austin Pet Detective, You can get this from Sparky Direct - the link is in the description of the video if you live in Australia

[@koestergaard]

Great instructions, but what does the little screw do at the bottom part of the left jaw?

[@mrtnxter6416]

With that screw you can adjust the press force before the tool releases and starts to pull down the insulation.

[@leebowen4019]

Just bought a simlar set off amazon but the gripper part won`t grip the cable youcan actually move it back to where it was when fully squeezed any help would be appeciated.

[@jocker5541]

Hello, can you give me information about this machine? I'm from Morocco thank you

[@tysmith7646]

Oh man wish I bought these instead of the pliers type one.

[@gagailos]

Can you explain what is this little knob it has on top? It turns left or right.

[@mdbadalmiah6808]

very nice this tools boos

[@minxythemerciless]

What is the screw thing on the left head? I see it bears on a steel plate between the jaws.

[@Fat-totoro-cat]

I have one of these - they suck. Most of the time the thing just stretches the insulation without stripping it. Better of with normal wire strippers.

[@richardrichard5409]

What does the knurled adjustment screw do?

[@elijahtill7734]

Guess I need to move to Australia!

[@AlanTrades]

Wow such a handy and easy tool.

[@mazambeliqbal3487]

I got exactly the same I bought yesterday I just used it twice and the black plastic broken and I'm trying to cut it without the plastic it won't cut

[@khanabutalha1794]

Namskar bhai ye pelash kaha pe melaga or ketna ka hai

[@temerario3320]

Hola y como se llaman estás pinzas y dónde las venden gracias ?

[@subhadeepbhatta1212]

Very satisfying.

[@sayarganie3261]

Good job

[@abidrahmankhan4719]

Very useful tool

[@SiiriCressey]

I want to strip all the insulation off wires for metal recycling. What should I use?

[@tinnedanger]

What's the little metal knob do ?

[@erickochoa9899]

If you are an electrician you know that this are not good when you have 200 wires to cut . Takes to long . They good for home

[@santanacasas1]

What should be use for professional use?

[@lakibul636]

thank you bro it's so easy 👍👍

[@thehomme]

What does the metal screw on the left gripper do?

[@sheshusheshu4651]

I like this gajet

[@ggtbrooks6566]

Definitely need one of these

[@danishelectrician4292]

I like this tools.

[@peterbrown1968]

i have Crimping Tool $5 and im sick off cuting wire with this, i will get this one on Ebay for $13

[@Jatinder_Singh_Jerry]

Very Good Tool.

[@yanasvyazi5252]

which means the points are red yellow blue?

[@Numankhan-gx2we]

very good

[@mayanand5281]

Nice

[@Thatguy-cf9qj]

They have these at walmart with less plastic for 6.99.

[@jomarvalmores711]

it is very useful indeed.

[@EvoKeremidarov]

Looks like a great tool

[@shivencricketworld416]

My automatic jam how I can fix it

[@andysmith289]

Excellent , thanks

[@mussie302]

I've got a pair of these and they're useless. They rip the cable apart so I've given up with them. How come everyone says they're so good?

[@sparkydirect]

Maybe adjust your setting correctly. Or get a new one. Sold hundreds with minimal complaints.

[@kilnprabu]

i have one, the round adjustment took off, will it he possible to repair

[@danutmihaila9974]

GREAT VIDEO.

[@achmaddzulfiqor9084]

Tidak berlaku untuk kabel yang bening itu. Ketika ditarik serabutnya ikut mencolot

[@rajganeshkumar371]

Good work for you

[@hamzak2569]

How much for this let me know the price

[@shivshewak8472]

nice tool i shiuld buy this

[@beto50ism]

Não entendi o que você falou mais o vídeo explicou muito bem

[@molley3268]

Along with some othe strippers it looks almost identical to the CK model

[@saadounalbaghdady6674]

Great video

[@sannynic]

I like the tool

[@malik9483]

Thinks

[@romeomostdie3507]

Aquí en México las puedes comprar en cualquiera ferretería, se llaman pinzas para pelar cable, cuestan alrededor de $280 pesos mexicanos, les recomiendo la marca Truper

[@DmitryLan]

Thanks for the info, I'll buy myself. Tell me please, what the camera to shoot video? Thank you.

[@sushantsachdeva3949]

Nice video

[@mdjowel2241]

Crescent Nice👌👌

[@congnongdiezel9341]

Good

[@samueldeter9735]

What's the brass looking adjustment knob for?

[@ygbodybuilder3023]

Does this do 8 gauge wire

[@laxmannepal761]

Wow nice

[@davidljohnson8514]

Great equipment

[@djelectricals34]

nice sir

[@suryasuryakannan491]

supeer striper