Wireless-n WiFi Repeater / WiFi Extender - WiFi Repeater router, Setup & Review - No Name

[@jakeberry2172]

Popped round to my dads he just pulled this out a draw no packet or anything said can you set this up son? 🤦🏻‍♂️ lucky I found this video well done sir.

[@CB-gv6co]

My dad just did the exact same thing to me, only mine is covered in dust and it’s been configured to a different internet

[@Metrofin1]

One of the best videos on KZbin_ and you don't speak as if you have a train to catch.Please show us how to add a second repeater.

[@nickscomputerfix]

Thanks, it's always nice to hear great feedback! 👍😎 You can add multiple extenders to your network as long as you don't daisy chain them off of each other. Each extender you add, will need to be connected to your wifi primary router/modem and not connected to each other.

[@GogleCust]

This guy is great I wish everyone will make descriptions like this

[@duprie37]

Two things that might not be very clear to a first time user: The password to get into the setup page is "admin", same as the login. The security key is the same as your router's password.

[@RokoC_96]

Yeah,but what is the password

[@catherinewills2557]

omg thank you! not all heroes wear capes!!! took me over a hour wondering why it wouldn't accept my''new'' login n password. googled sooo much n thanks to your comment go in FINALLY!!!! So thank you was ready to buy a new on lol

[@johncaldwell277]

Wow! I followed your instructions and it goes like a rocket! Now I can wile away the hours in the Mancave with full internet speed.

[@nickscomputerfix]

😎👍

[@rebeccarbrantley3694]

THANK YOU!!!!! I purchased one of these on ebay, no instructions included.. I came over to youtube & searched for "wifi repeater instructions" .. your video was the first one to come up.. I followed your steps exactly as you said to do.. EXCELLENT!

[@nickscomputerfix]

Awesome! Glad my video helped you out. Thanks for the feedback.

[@DonegalOverlanding]

I would like to let you know that I really , seriously appreciate the effort you made in creating such a concise, accurate video without any additional fluff. After trying for ages, and giving up, I came back to this as we really needed the internet extended out to our workshop, and also beside the pool. Our mobile signal is pretty rubbish, so being able to use our 1GB fibre is awesome, even though this device only allows a fraction of the speed. Thank you so much.

[@nickscomputerfix]

Wow, thank you the great share. Glad my video was able to help you get your extender working for you.👍😎

[@JulietaEriksson]

Thank you very much. I have been struggling to install this for almost two days now and then I found you. I followed u step by step. I wouldn't have connected if it was not for you. I am so grateful, thank you.

[@TheTubeMeister]

when I plug the repartee in the wall (yes it's close to the router), in my wireless network list it doesn't show "wireless repeater".

[@m1nhtam]

me 2

[@kayla_r0se421]

Why can't I see my one in my wifi?, I've been trying to do everything you've done step by step but it's not showing up

[@senseibrandy3297]

I followed all of your directions. I get to the wifi wireless in page and when I click on "repeater" it says " 192.168.10.1" refuse to connect. Can you please Help me!

[@lemuelcubian6702]

same here

[@tonbrochs7774]

192.168.10.1 doest not show.

[@reekinhavok420]

I'm trying to use multiple ones when I set up my first one it worked but now site won't load for 2nd 1

[@trvman1]

Here may be the fix. I could not get this to connect to internet on my laptop computer. I tried connecting on my TABLET and it connected following the instructions on here or you get with it. Went back to laptop and now it works there. So try a phone or tablet to set it up.

[@firdausyunus7003]

@@trvman1 listened to your advice and used my phone to set it up after countless times using my laptop. Found out that using laptop the channel is 8 but when setting it up by phone the channel is 6. Now my phone is able to have internet access but my laptop can't 😡

[@edward311]

I just purchased a new wireless router and was having murders understanding the instructions. You saved me ton's of grief with your easy to understand set up video. Thank you so much.

[@nickscomputerfix]

👍

[@windycity2144]

when i plugged it in three lights were lit up

[@gordanakuzmanovic4962]

I bought a repeater yesterday but I didn't get any instructions. You helped me a lot. Thanks 😊

[@jsc_momentz]

I Also bought 1 today

[@shulow1]

Thanks for the video bro! But after so many attempts I fix my problem by smashing it in to the concrete and buying me a good one lol

[@nickscomputerfix]

:-)

[@kaos42ze]

What was the problem exactly ?

[@trvman1]

Here may be the fix. I could not get this to connect to internet on my laptop computer. I tried connecting on my TABLET and it connected following the instructions on here or you get with it. Went back to laptop and now it works there. So try a phone or tablet to set it up.

[@bangnokia]

same as me, fuck china

[@ibrahimakyol3259]

@@trvman1 0. Nx..p

[@bezirochepolska1295]

I have one question!!! I type IP adress of Wifi repeater on a browser, but It's not work. Everytime I get this " Browser can't open this page" on every PC. Computer see my wifi repeater. How to fix this?!

[@yournightmares9545]

Same question I'm having the same problem

[@Joachimfico]

Thanks, I've been having this laying around for 2 years.. And lost the manual..

[@darthdredd4148]

Lol same untill today thanks to this . 😎😂

[@sweenykeen3776]

THANKS BRO THIS VIDEO WITH YOUR INSTRUCTIONS ARE SO GOOD

[@nickscomputerfix]

You're welcome!

[@sweenykeen3776]

Your welcome

[@Pipsterz]

Thanks Nick - Followed all steps successfully BUT then the laptop wouldn't connect {timed out each time}. "Failed to obtain ip address"... HELP pls!

[@nickscomputerfix]

What would not connect, your laptop, cell or the Extender itself?

[@Pipsterz]

Sorry, my laptop.

[@nickscomputerfix]

If you see the SSID then it's a wifi password issue. Double check your password. Also your laptop might need to have it's ip released and renewed, you can do this via cmd prompt.

[@pedrol3crogojan534]

sensdeath subtitrat

[@roseedge5626]

Pip I have the same problem. My computer won't connect, my phone won't connect.

[@dangraphic]

(1:45) They didn't separate it for packaging reasons, but because this unit is sold all over the world. European countries use a different type of plug shape, the product is disctributed by region and involves different plugs for different places.

[@lisajohnson8566]

I have two of these and for the price are amazing. They just work and have had them in operation for two years now.

[@guybutler1973]

Do you have them in tandem?

[@mahagaida160]

I have two, the white is working but the black one can't work

[@VojtaVokoun]

Best tutorial i've seen on this WIFI repeater.

[@sentionation4117]

I've had it for over a year and this is the first time I'm using it

[@marianabonner1745]

It's for 9.79 dollars www.gearbest.com/network-cards/pp_607560.html?wid=21&lkid=10770151 pretty cool kzbin.info/www/bejne/hIDOmn56itdmbdU

[@ivanaisa6617]

same

[@godwinosebhor8519]

But I don't have computer, can i use phone to set it up?

[@orcamaus21]

Great Video - helped me to set up my no-name wireless repeater 3 years ago. Now I have upgraded my home broadband to fibre broadband. I intended to re-set my repeater to the new network but that did not work; the devire cannot be contacted by typing in its default IP address (as shown for the initial set-up). What might be the reason? Is it possible that - once set up - the repeater cannot be used with another network?

[@orcamaus21]

press the reset button on the repeater - that should solve the connectivity issue; re-setting to a new broadband network works exactly like initiating the repeater for use as shown in the video

[@quantryli]

I can’t connect to the internet. I already tried connecting on all devices and nothing works

[@macky99]

Try to reset the tiny repeater

[@naijawalker2409]

Thank you so much for the video. The process for setting up for Wi-Fi was straightforward. However, I’m still struggling with setting it up for a non-Wi-Fi device. How do I solve this?

[@nickscomputerfix]

You're welcome! Glad it helped! For any non wifi device all you need to do is plug in directly into the Ethernet port on the extender. Nothing else to do. It's plug and play and no driver to install. Of course this is after setup is completed as shown in my video.

[@tonymillebloogiant6620]

Like everything else in my life . It works for them and not for me !

[@davidpaepke7397]

Here may be the fix. I could not get this to connect to internet on my laptop computer. I tried connecting on my TABLET and it connected following the instructions on here or you get with it. Went back to laptop and now it works there. So try a phone or tablet to set it up.

[@TheTallRaver]

Thanks buddy! Yes, it worked through my phone but not with any of my laptops! Now, after doing the setup with my phone all other computers can connect!;)

[@stormieee6135]

Did you guys use your actual password word? Or the password on the modem box?

[@trvman1]

I can't remember. Try the password for the modem you are connecting it too. Most likely it was that one. If that doesn't work, then try the password you set up for the extender. If you have got to the point where the extender shows under wireless connections, then it will connect with one of the passwords.

[@nathanarmstrong6630]

I agree with you. I've tried following instructions but it doesn't work.

[@olusegunolufemi5166]

Thanks for the video. I had already used a different router with the repeater, but I have issues in trying to reset the repeater and use for another router. The reset button on the repeater device doesn't seem to work. Would you know any other way I can reset the repeater?

[@robynondalo3638]

My no-name, brandless, and generic POS of a repeater was previously owned by a friend of mine. I assume it must’ve worked at some point. Now that I have it, it doesn’t even show up on the list of available networks. I’ve tried hitting the reset but but still no luck. Any suggestions???

[@breezekeogh1808]

For anyone who also just forgot the default username and password - it’s - admin for both

[@ronenboyme7414]

thank you 🙏

[@Bojonni]

ily

[@laurenflintoft3274]

Thank you so much! Your tutorial was a life saver! Works even in the UK

[@jackt7331]

Ok, I finally managed to make it work. I hope this comment will help other people. if your repeater doesn't say "open" on the wifi list, you need to reset it. To reset your repeater, hold the small reset button on the side of the reapeater for like 30 seconds (could be less but i'm not sure). Then keep it plugged, it will reset and then say "open". Then type 192.168.10.1 on chrome and log in (username and password should both be "admin"). Then proceed like in the video. Then you need to use the SAME password as the wifi you are linking it to (don't create a new password for the repeater). You will then log in to the repeater using the same password. Please thumb up this comment if it helped you.

[@v4u1000]

This is not working for me. I cannot even get to that page to type in "admin", smh.

[@dippydoo1000]

been using one of these for over a year perfectly, i can even repeat the repeater even further using the same set up procedure on a second repeater, you just detect the last repeater in set up and give it a new name but use same password, my router is at least 30 feet away through 2 wall , you have to remember that you will have to enter the password again if your on windows or linux

[@brainstorm90]

Hi, can this be used to capture the wifi signal and bring it via ethernet cable to a device that doens't have wifi?

[@nickscomputerfix]

Nope.

[@jeffreyfan9212]

I'm actually doing it right now, it can.

[@nickscomputerfix]

Thanks for posting that yours works. I've made several attempts with my repeater unit and it doesn't work.

[@jeffreyfan9212]

***** I'm not sure why it doesn't work for you, I have the exact same model. Perhaps you can try to reset it?

[@nickscomputerfix]

I'm good. I don't need that function. Thanks for letting people know that it does work.

[@peachesandolivia]

This worked perfectly, I'm so glad your video was here. I've had this sitting around and had never used it. I put it upstairs in the hall and now get a very nice signal in the master bedroom. Thank you!

[@nickscomputerfix]

Glad my video helped you out. Your feedback is appreciated. Subscribe if you would like to see more great videos like this one. Click on the Bell icon to get alerts.👍😎

[@yocapitan5417]

Nick - Brilliant! I have one of these but lost the manual. I would have been lost without your video. Beautifully clear and concise. Many thanks John

[@nickscomputerfix]

You're welcome and thanks for your great share.

[@timelanguid4813]

thanks I have one of these without instructions, I'm using mine upstairs with an ethernet out to a device, not sure about which to use wireless or access point, which is best for boosting signal?

[@nickscomputerfix]

Both ways work good. Try the wireless first and see how it works in your environment.

[@targaryenjahaerys7927]

i bought this but it stop working and i can't see in in wifi list and its not restarting... help!!! please?

[@N0t0ri0us1994]

I had same problem. It worked few minutes, than this happend. I wrote to seller - gearbest and they send me a new one. I hope, that this new one will work longer :D

[@johandebeer4045]

disconnect from your wireless/dsl connection and follow the same steps as I discribed in the previous post to Totis Panayi, but instead of doing it wirelessly, do it through connecting to your pc/laptop using the supplied RJ45 (network) cable..

[@shadeshade9703]

Which sec key do you punch in once you changed the name of the repeater?

[@lemonsnow2875]

DUDE THIS WAS SO HELPFUL THANK YOU

[@videogamesarefun808]

Same it's helpfull Thank you

[@teleishamber]

Thanks to your video I found out how to attach the plug to the wifi repeater!

[@nickscomputerfix]

Glad I could help

[@pizzatrust9521]

Got a $1800 PC and just now I noticed that I get like 50kbps

[@Bouletts69]

Use ethernet cable.

[@Bouletts69]

My ps4 gets around 80mbps

[@vick5955]

My son has a weak signal in the basement from our Xfinity wireless. Can this help him get stronger signal?

[@TheCanadianBaconerHD]

This is video helped so much thanks !

[@fembyarinka571]

Sir, my wifi repeater did connect but no internet access. What's wrong with it? Can I reset the setup by not using the reset button? The reset button is broken and the seller refuse to change for the good one :(

[@baysneakvrhead5445]

So is the IP the same for everyone

[@nickscomputerfix]

The default IP address for the device to initially access it and set it up, is the same for everyone. It changes after setup is complete.

[@yannicklayere653]

nickscomputerfix does that mean you can only use it once? Got a new router/internet provider trying to connect but ip not working

[@9945223]

I have a question as to what connection I should disconnect, I'll try to be clear on this, my wifi is Lynksys and that is connected to my modem and I have an ethernet cable going from Lynksys router to computer, what do I disconnect to just have the repeater working? I have tried everything prior to looking on youtube for help.

[@KrotowX]

You should add Internet speed test results for your 2.4 GHz WiFi router connection and for this WiFi repeater. During tinkering with WiFi repeater you demonstrate here I found that it can support 75..85 Mbps WiFi speed (N mode) only when WiFi repeater is connected to my main router by Ethernet cable and works in AP mode. In WiFi repeater mode supported WiFi speed for connected devices drop to 6..8 Mbps, especially in areas with crowded 2.4 GHz. So real use for this repeater shrink to internal network AP role. As WiFi => WiFi extender it simply suck. Also when desired configuration (AP or repeater) is set, you will not be able to log in this repeater configuration page again (though you can see it by IP and MAC addresses with netwrking tools) which is simply stupid. To change configuration, you must factory reset this repeater with Reset button (hold it for +/- 10 secs until all LEDs switches off and on again for a second) and start all over. Thanks about this video anyway. Without it was hard to realize that in repeater mode this repeater must use same WiFi password that is used in router.

[@AdamGeorge-pb3fm]

I can confirm the above.

[@cs.6002]

Can I set this up with a PlayStation 4 slim

[@rafaelmdiaz11]

Very nice vid. Thank you i am going to give one a try.

[@nickscomputerfix]

Tks.

[@mohammedbasem9919]

I did exactly like you showed until 5:33, where you close it and so did I but the difference is that mine still doesn't have internet. :(

[@kenjackson1663]

Top draw description, thanks for that. Been wanting to get this working for ages. Looked through the manual but had no look. Works fine now.👌

[@North63Point]

no luck

[@MrHairyNeck]

It wouldn't even set up. Couldn't connect to that url.

[@dominiquehiggins9183]

Hairy Neck did you figure it out ?

[@renegorenjak7703]

me neither

[@dominiquehiggins9183]

Make sure that your laptop is CONNECTED TO THE REPEATER BUT SAYS NO INTERNET THEN TRY THE URL, if it’s not Connected to the WiFi repeater it will say site can’t be reached

[@totisgate9]

i cant even see the wifi repeater in the internet access . help pls..

[@johandebeer4045]

Make sure your pc/laptop is disconnected from your wifi connection, you must have no active connections, otherwise it's not going to work. Then try it again and it'll pop up under your available connections alongside your regular wifi or dsl connection under the name WiFi-Repeater, select and connect to it. once you've connected to it, it's going to state NO INTERNET ACCESS. This is okay as you still have to configure it as a repeater, seeing as it's stock configuration is as an AP, not repeater. Once connected to the repeater, go to your browser, type in the address bar 192.168.10.1 and it'll take you to the login page use "admin" as username and "admin" as password and you'll be in the setup wizard.. from there you can just follow the above video guide... I bought one today, had the exact same problem and by just closely paying attention to the video, had mine up and running in under 5 mins.. As a matter of fact, I'm typing this message using my repeater right now.. NB: make sure you are not connected to any of the available networks you have. NB

[@adlinantoine1438]

Had some difficulty setting up my brand new wifi Repeater but found your video and step by step did the setup successfully. Thank you.

[@jordanreid3832]

It's shit don't buy it, awful to set up very slow connecting to the network it's a piece of shit

[@MrFrambooise]

hi, I know its been 4 years, but I will give it a shot. Does the WPS function works on your repeater? Can you use wps function to connect new client to the repater already connectend and configured

[@somethingyousaid5059]

I bought one of these at a yard sale for 3 dollars. You specified in the video that you would need the user manual in order to set up and install the unit. The thing is, the one that I bought at the yard sale didn't come with a user manual. (It was missing.) So my question is, can I set up the repeater to work in spite of lacking the user manual? I mean there wouldn't have been a specific user name or password that was in the pages of that manual without which I wouldn't be able to install (and use) the repeater would there? 1:22 shows what looks like might be a user name and or a password in your user manual.

[@nickscomputerfix]

You will most likely need to perform a repeater reset by using the RESET button (press and hold for 12-14 seconds) while it's plugged into a wall outlet and power is on, then release the RESET button and go through the setup steps as shown in my video. The repeater setup will be successful without a user manual.

[@somethingyousaid5059]

@@nickscomputerfix Thanks very much for clearing up my confusion about whether I'd need the manual to use the unit. But I'm nervous about messing around with my network and internet settings. I've had no experience with regard to making changes to them. Oh, and I wanted to ask you where exactly do I find the IP address of the wifi repeater that I'm supposed to input into address line of the browser? Am I supposed to input the IP address that you did? (4:12) And then right here (4:20) are you inputting a default password that you already had or inputting a new password (as a default) that you had to create? Just goes to show how confused a newbie can be.

[@chanj612]

I have broadband connection but no WIFI icon on my task bar. Both my iPhone and iPad are connected to my network via Wifi. How do I setup the repeater in this case?

[@Carpe_Diem_40]

I bought that thing today. I got Tenda Mesh at home so is this gonna work if i connect this repeater to the signal of that Tenda Mesh ???

[@gregorkokalj9326]

Hi, I want to ask you when selecting the repated and once it scans your wifi network, why does it not find my wifi network SSID? Any ideas? Thanks!

[@beretgascon]

It worked for me first time. I had this thing sitting around for at least two years collecting dust and this evening I thought, what the hell, why not set it up so I have wifi at the back of the garden. Your tut was word-perfect, it worked exactly as you described. Many thanks! 😁😁😁

[@nickscomputerfix]

Your are Welcome. Thanks for your feedback. Glad to hear about your success and that my video was helpful towards your goal in setting up the Extender..

[@Slainte-Mhath]

Thanks for this, I have two of these and lost the instructions. They are not quite the same setup, but close enough to get them set up with my new router. Sadly they are very slow when using as repeaters. Reasonable in AP mode.

[@josephheston7899]

It’s not finding my WiFi network when it’s scans. Is there anything I can do here ?

[@nickscomputerfix]

You most likely will need to perform a repeater reset again by using the RESET button (press and hold for a real 12-14 seconds) while it's plugged into a wall outlet and power is on, then release the RESET button and go through the setup steps again as shown in my video. Also try moving the Extender closer to where your router is located while setting it up, then you can move it if you need to. Also when setting it up double check that you are using the correct wifi password to connect to your router with the Extender during setting it up.

[@robinmazariegos1]

I have the exact same wifi repeater as your. When I plug it into the wall socket, the top button is red, not green!!!! All the buttons below the power button are green though.

[@nickscomputerfix]

Suggest a reset on the repeater if it is not making a connection to your WiFi.

[@black.bird.]

pls help I accidentally disabled the device from setup page. now, the wireless signal isn't found even wired connection not recognized! How to re enable it again?

[@black.bird.]

@nickscomputerfix

[@Legatus6666]

What should I do if instead of showing available routers to connect to it shows me what I'm currently connected to (it shows no internet access) and all I can do is going to network and sharing center?

[@ghiloballesteros9851]

is it necessary to press the main router's wps button or not sir?

[@tonycopeland1889]

thanks for the help pal. you are a decent instructor. good rate of speech, easy to understand... etc. thanks.

[@Deathjon]

If you have an ether net cable can you plug it in to a consol. Do you have to pay extra money for wifi

[@jonmanilenio]

I have mine setup in the room where the original SSID is weak. However, what I've noticed is, even though there's a full signal from this repeater, my phone still connects to the original SSID. Even if I switch to the repeater SSID, after a while, I notice my phone would lose the repeater's wireless signal then connect to the original SSID. Maybe my repeater is faulty?

[@lefteris.adamou.1]

Mine resets after i turn off my router.if i turn off the repeater it still remembers but if i turn of the router then i need to setup again

[@MrPaf01200]

Hello I got one and I see something interesting. If I use the repeater, , pretty close to the router I have the upload speed is the same the download speed is about the one third if I connecto repeater isntead the router. Connected to the router download speed is 70 Mb, connected to the repeater 20 Mb. All laptops and IOS does the same thing. pls advice

[@bannerbomb8693]

hm, doesn't seem to work as advertised. I got mine yesterday set it up. My network I used with it for repeater mode meets the requirements. And I am only literally 5 feet away from my router and I can connect just fine to the repeater but after about a minute it disconnects from the main router. But mine is a newer model within the N series. But after it disconnects I go to my main router diagnostic logs and see `Server id and requested ip not found`

[@alexijspeerd815]

If i do exactly what you say in THE video. At THE end it says WiFi-repeater (name of network) no internet. Help me please?..

[@nickscomputerfix]

Reset the Repeater unit (via side button, see other comments on same topic) and go through the install again. Also get closer to your WiFi router when setting unit up.

[@ponckenzy]

I got the exact same one and it’s fine when no ones using the wifi but I wanted to ask that if I connect my router to my pc via Ethernet cable does it make the internet faster

[@nickscomputerfix]

It will provide a better and more quality consistent signal via the Ethernet cable.

[@MrFrambooise]

hi, I know its been 4 years, but I will give it a shot. Does the WPS function works on your repeater? Can you use wps function to connect a new client to the repeater ALREADY connected to router wirelessly and configured as wifi repater not as AP?

[@Stevej2013]

Hi Nick, I do not have the wifi icon in my bottom right of the screen. ( I have a desktop pc) Any hints? Thank you

[@bassa80]

Hi, sorry but can't find other message with same problem. I disabled the wifi from setup but now I can't connect obviously with WiFi but I can't with RJ too... Resent won't works, how can I do??? Thanks.

[@marelys07]

There's a problem I'm not getting the page on the browser what's the page??????

[@lauriesanchez2255]

Can't get the green light. how can I fix this. And were should I plug the under end of the RJ 45

[@marcusstarr2000]

American in SE Asia I have in my downstairs office my Tenda made router next to my desktop I don't use a laptop . Am I correct I will add the required information into my desktop connected to my wired router?

[@nickscomputerfix]

I take it that you are asking if you can use your ethernet wired connection to enter the required information to setup the repeater. The answer is yes, if you have a WiFi router on the network. WiFi repeater extends WiFi router.

[@junbecks]

Ive having a little problem. I did all of that according to your video instructions. But for some reason only my 2 ipads connect successfully to the repeater and are able to surf the net. I have two android phones in the house, they connect to the repeater alright, but no internet!

[@hettiemowmow]

I have made an error somewhere along the set up process and need to reset the extension. Currently I am getting two green lights (the two top ones I think). Any help appreciated

[@arvindpadhiar3544]

Hi looks like nice product but want to know where i live is 3 floors house and main router is connect at top floor and my Tv and tv boxes are in basement so which one should i buy? looking for cheap one. thank you.

[@nickscomputerfix]

+arvind padhiar Can't tell you that. Too many variables in house design, construction materials, wall thickness and main router quality plus distance from where you want to get a signal. This one is working OK for me for now in my house. And like I said in my video if it does not work out....it was only $12.00, if it continues to work...cool....if not....no big lost. Good Luck on your purchase decision.

[@arvindpadhiar3544]

ok kool

[@bake4]

Thanks million i just saw ur video once and follow ur instructions and i succeed.

[@nickscomputerfix]

Happy to hear about your success. Thanks for your great feed back. 👌😎

[@fireman5129]

This may be a dumb question but can you setup this up so a smartphone will also have access to the wifi connection? because I do not see anywhere where it says it can connect a smartphone. Thank you for your help!!

[@nickscomputerfix]

Yes, you can set it up via smartphone. You just need an Internet Browser. Yes, your cell can connect to this device.

[@AyrBlues]

I get a week signal in my flat from an open source WiFi.......can I use this to connect to it to make the signal stronger. I use a Galaxy tablet for Internet access......cheers for any info.

[@nickscomputerfix]

Repeater/Extenders will connect to most wireless networks, including open ones. How strong the repeated signal will be from an open source WiFi is questionable because they normally are already pushing there limits anyway.

[@edwardsecb]

When I plug the unit into the wall, I get the 1st light on and the 2nd one blinks. Per you instructions, I should be able to see this unit when I open my Networks. However, I do not see it. What am I doing wrong? Tx

[@nickscomputerfix]

Try plugging it into another wall outlet a little closer to your router and computer.

[@millertas]

1:40 the plug was separate since plugs are different throughout the world so that the Chinese Company could standardize the packaging with only the plug being different depending what part of the world it was exported to.

[@TheSlyolfart]

I am trying to set up a wireless-N-wifi repeater. The exact one you show a video on. My problem is it does not show up on my networks connections. Can you help me please?

[@trvman1]

Here may be the fix. I could not get this to connect to internet on my laptop computer. I tried connecting on my TABLET and it connected following the instructions on here or you get with it. Went back to laptop and now it works there. So try a phone or tablet to set it up.

[@rodrigosnape12345]

Is possible to use this repeater to get my wifi signal and share with the rj45 cable? I have a smartTV with no wireless. Just with the rj45 cable connector.

[@nickscomputerfix]

Yes that will work.

[@prettypleasewacot]

How do you reset the repeater? When I plug it in it flashes 3 green and 1 red on bottom. It doesn't have just the one green light on the top like in your video.

[@nickscomputerfix]

Plug unit into AC wall outlet. Wait around 30 seconds. Press and Hold side reset button for at least a real 10 seconds while it's powered on.

[@prettypleasewacot]

Tried that again. Didn't work. Still flashing red and green

[@Haris-gx5yt]

Can u make a vid like i have a 2 floor house and if i connect it wirelessly the internet on 2nd floor is shit so can i connect a lan cable from my modem to that mini repeater??

[@nickscomputerfix]

Yes. The repeater can be used in AP mode (Access Point). You can connect it via the Ethernet port directly with cable, to your main router.

[@Haris-gx5yt]

Do i need to set something up?Or just plug in and its done.

[@nickscomputerfix]

During setup and install, choose AP mode and not Extender/Repeater mode.

[@Haris-gx5yt]

***** okay thank you very much.

[@kathysmith5362]

so what is the cord for in the package - you didn't even mention using that

[@olekk.1340]

i have a similar one, on which i can manually set if i want a repeater, acces point or client. when i connect to it, go on google and type in the ip i can only set it up for an access point (i need it to be connected to the wifi wirelessly so i can connect it from there to my pc) help needed

[@nickscomputerfix]

Try a Repeater reset by using the RESET button (press and hold for 12-14 seconds) while it's plugged into a wall outlet and power is on, then release button and go through the setup steps again as shown in my video.

[@mlungisimndaweni8231]

hey, can i use this to connect on a public network? we have a hotspot here and it doesnt enter my house. thanks

[@andrestefan3871]

How do I repeat a connection from a LAN cable instead of the wifi? Sorry if I don't make sense. It used to work like that before I did something stupid. The wifi signal is poor, hence I prefer to connect the LAN cable and repeat the network.

[@andrestefan3871]

By the way, I chose the AP mode, but the LAN light still doesn't come on.

[@lidulmonkey]

Is it possible to use the lan cable from the extender to connect to the computer as well? since computer doesnt have wifi

[@nickscomputerfix]

Yes, you can use the Cat5/6 LAN cable to perform the setup on the repeater via your computer cable LAN port.

[@noeljay3273]

Hi Nick! I tried the same steps, but I think they don' t work in Windows 10. I can't see the Wifi Repeater in my list of available wireless networks.

[@nickscomputerfix]

+brix stifler Mine was installed and setup was done using Windows 10. Try it again following my steps. But first, before you begin again do a reset. Plug the repeater in and press and hold down the reset button on the side for 15 seconds. Then follow my video again steps again.

[@jess6831]

What does the Ethernet port do on this? Can we connect a WiFi repeater to our router via the ethernet port so another part of the house has WiFI? Or can we not use this port?

[@nickscomputerfix]

Yes, you can use the Extenders ethernet port to connect your WiFi Router directly to the Extender. However, it's easier to connect the Extender to your Router via wireless.

[@jess6831]

nickscomputerfix We can use them as Access Points then?

[@nickscomputerfix]

Yes.

[@jess6831]

nickscomputerfix Doesn't work. Bought a pair today and it just doesn't connect that way. It's only through WPS.

[@omermintz6276]

Hi! I want to know if once i was setup the wireless repeater with some rauter, how can i to sweach to another rauter, in another appartment. Thank you!

[@nickscomputerfix]

You can move it to another router in another apartment by resetting it using the RESET button (press and hold for 12-14 seconds) while it's plugged into a wall outlet with power, then release button and go through the setup again as shown in my video.