Wireless Transmission of Energy (+Circuit)

You need just a 9V battery as power supply to transfer electrical energy and demonstrate it. REAL and very effective " transfer of electrical energy" as Nikola Tesla did almost two centuries ago with no use of spark gap, but a modern setup using a transistor and extremely easy electronic RF circuit diagram (no induction effects).

[@ChrisElisonElectronics]

Very cool!

[@johnkoury1116]

Super cool!! and too think Tesla was doing this 100 years ago....The powers that be certainly curtailed electrical research for a very long time. keep up the great work...

[@nataljahappyteacher918]

Amazing!

[@michaeledmaley6036]

the awesomeness that he shares the schematics.

[@Caesarus2011]

Excellent work, many thanks for sharing ❤

[@time_energy]

Nice! If you replace the "antenna" to just alloy foil, working as well! :) Foil ball.

[@rildosouza7223]

Muito obrigado Amigo👏👏👏👏🇨🇨🇨🇨👍👍

[@variousexperiences6485]

Very nice thanks

[@frezareza3343]

woooowwwwwwwwww I think I found a solution to my problem🤨🤨🤨🤨🤨🤨

[@harpbloke]

Hi, your demonstration is great and easy for any person to try. The audio output circuit arrangement is interesting. The germanium diode to speaker after the led.. i don't know enough about electronics. Also, is it possible that the receiver antenna, that is at distance, is reacting to its own (receiving) circuit/oscillation, instead of the transmitter antenna.. just a thought

[@gsav2504]

Hi. The diode cuts the HF signal and the music which remains can drive the speaker directly. The Antenna and the 10 turns coil is one thing! For good results, it has to be 1/4 of the wave length. Wherever the Antenna located.

[@mikeflight9]

I like your setup for this. Great idea to use those variable capacitors. I wonder if you could extend the receiving distance. It's a very good demonstration. 👌👍👍👍

[@gsav2504]

The distance between transmitter und receiver can be extended.

[@Svidge_123_]

Excellent demonstration of the concept. Слава Україні!

[@railgap]

If only the Inverse Square Law wasn't a thing. ;)

[@lektor6910]

Awesome videos on your channels. Thanks for sharing? Really good how you explain it with the schematics. Can you name me the type of your variable capacitor? Thank you.

[@gsav2504]

You may use any type you like from 10 or 100 to 300pf or more.?

[@gsav2504]

You can find this one in Ali Express.

[@lektor6910]

@@gsav2504 do you have a modelnumber? Just found CBM-443BF. Thank you 🙏

[@martinetellerandet8566]

Thanks for the nice video :) Is there a surplus of energy in the system like a gain, like a over unity thing going on when the receiver LC is turned of? Can you expand on that please :) What is going on? Thanks

[@gsav2504]

There are no overunity effects here. Only a good efficiency Q of the transferred energy to 90%, when the resonance is right.

[@isaklytting5795]

I don't know anything about electricity. But I can see the wire you call "ground" is connecting both sides of the setup. For me, that makes it seem like it's not wireless, but is just going through the wire? Why not try to connect to the real ground to see if it still works? Otherwise, maybe the power transmission you are experiencing is just going through the cable? Also, how do you get the signal to 16 MHz? What part of the circuit generates this oscillation? Is it just a function of the design of the coils? Are the coils free metal or are they coated with an insulator?

[@gsav2504]

The “ground” can be connected at the part of the transmitter with the same results. It is a real wireless transmission of energy. If you want to use a real ground then you need power.

[@HiggsBosonandtheStrangeCharm]

....the transistor in the circuit diagram didn't exist for another 50 years after 1898.....

[@gsav2504]

2n2219 is easy to find! you will find lots of them by e-bay in good price.

[@variousexperiences6485]

Dear friend I try it with 547 transistor but it does not work may you make an other video explaining how to

[@gsav2504]

Why don’t you use the same transistor 2N2219? The BC547 have little power.

[@variousexperiences6485]

@@gsav2504 I haven’t it. My you explain about the coil of 20 turn please

[@gsav2504]

@@variousexperiences6485 Very simple. On a 8mm cylinder wrap 20 turns of 0.5mm magnetic wire. make a tap and turn 6 more turns in the same direction. For the connection, look the circuit diagram!

[@variousexperiences6485]

@@gsav2504 ok thanks for your reply

[@EmirCerit]

Здравствуйте G Sav, Just for understanding, If you make the ground, same at the Receiver and the Transmitter. The distance is not important it can go as high as 15 m or maybe even higher. But you showed us at 09:19 , grounds are different and the distance is just 30 cm. So the main idea is, resonate the frequency and same grounds. Did I understand it correctly sir. Lastly do you have something in your mind to improve the distance without same ground. Большое Спасибо

[@gsav2504]

The Video at 9:19 shows that the transmitter ist already connected with the ground of the house and if the antenna und the ground (wire) of the receiver have the same length , then by approaching we can achieve energy transfer with no wire connection at all.

[@gsav2504]

In this case is like an induction circuit but with a great efficiency. 30cm is with 0.5w. Can you imagine how much more efficient it would be if the power of the transmitter is higher???

[@EmirCerit]

@@gsav2504 It would be fascinating to see. But do you think the amount of noise that transmitter created could cause some problem on other receivers like our phone ? Thank you for your answers. I'll be waiting for your new experiments. Have a good day.

[@gsav2504]

@@EmirCerit don’t worry about it. Forget the Herzian waves. If you tune it well as I demonstrated then you have 0 harmonics!!!!

[@hfrequency]

С розетки наврдящее электричество эдс т.к земля ещё вторая присутствует образуется ток разность потенциалов

[@gsav2504]

Никакое сравнение здесь!

[@WabuhWabuh]

why do people not use AI for vocals?