Wiring Up the Factory Five Hot Rod Truck with Joey Logano | Snap-on From the Ground Up

[@frankrizzo5057]

My favourite would have to be a toss up between the newest storage chest with the wheels and tires from the street and the MIG welder with the auto settings.

[@QueenCitySpeedShop]

My favorite Snap-on tool is this week is my CJ2000SB puller set with cabinet. I had the cabinet custom painted to match my Cranberry box. Wanted one for at 20+ years and now I have it.

[@JDMdrifterboy7]

Can't wait to see a full walk around video!

[@justinboyle1680]

My favorite is my TX72. It fits EVERYWHERE I need it to, I love the locking mechanism, and it's broke bolts loose me lesser brand ratchets couldn't. I seriously use it daily.

[@coreysuttles1362]

Love this series!!!! My go to gets abused and used to its fullest potential every day tool is my 25" locking flexhead ratchet!!! I love that ratchet more than anyone should ever love a tool!!

[@slim8270]

My go to tool is Snap On's FX80 3/8" drive locking flex-head ratchet. I prefer the Snap on non-comfort grip line up when working in tight quarters, it gives a bit more room to work.

[@TheMot616]

That electronic torque wrench looks pretty accurate and easy to use in small spaces.

[@MegaScott]

While working at my job as an Electrician at Boeing, the Snap-on Torque wrench with Light's, Vibration and Sound is my "go to tool".

[@zakk5938]

The only snap on tool I currently own is a 3/8 ratchet that my grandfather gave me when I graduated. Would love the socket set to go with it.

[@Honcho-mf8lf]

My go to is definitely the 3/8 long and standard flex ratchet! a close 2nd would be my 1/4 flex.

[@teranceyahize6937]

Flank drive plus ratcheting wrenches are my go too everyday first tools to go in my tool bag

[@frankrizzo5057]

My go to tool is my small ratchet set as I use it when building bike.. I often rebuild old bikes and need the compact size for the tight areas and the strength for the nuts that have been on there for 40 plus years.

[@jgarcia108]

I use nothing but Snap-On, great tools and they can take the abuse and everyday real use!!, I have a Kenvin Harvick Rookie toolbox from back in 2001-2002. I WANT A EUV, I need more room!!!! Awesome build!

[@jan80862]

The magnetic pocket screwdriver you get for free always getting new ones

[@nickhale117]

How did they (whoever mated the trans to the engine) NOT notice that the input shaft didn't match the clutch splines?...

[@joesheppard8000]

The build, tools are impressive

[@matttraverson910]

My go to favorite is the flex head 3/8 ratchet... Go Team Snap On

[@braydenbramlett9518]

Best tool is the 3/8 drive locking flex head with the comfort grip. Use it on a daily basis

[@JoeLafary20]

My favorite tool is the mg725 air gun. Love the power.

[@luigitorchia8866]

My go to Snap-On tool is the 3/8 drive long flex ratchet with red soft grip. Ratchet number FHRLF80A . The best flex ratchet out there.

[@marksdiygarage249]

My go to socket when I drop a transmission out of a car is my Snap On FS18A 9/16 flex socket. My other favorite Snap On tool is an old pick aet handed down to me...a PAK560051. It's a 4 piece pick set.

[@aaronspanswick1433]

My 3/8 long flex head! So versatile!

[@RhBKeith]

Question: when you drill the million holes in the frame/chassis to mount various things, do the holes get treated with anything like paint/grease etc? Love these videos plus the garage series.... My favourite Snap-on tool is the distributor wrench-can’t beat it.

[@kevinchan6192]

My go to Snap-On tool is the FBF80 3/8 ratchet.

[@kylesuffa9034]

My favorite snap on tool is my 3/8 ratchet with a black hard handle

[@dtreuro7165]

Go to tool/tools are the Snap On metric reversible ratcheting wrench’s. Small box end, way better then other brands for getting into tight place’s.

[@chrisr1929]

Midlength 3/8 6pt metric sockets are my mostly used tools.

[@carloscontreras284]

My favorite tool is the 3/8 ratchet

[@mitchsalo4828]

Hands down my 1/4" and 3/8" universal sockets. When you need them, you NEED em.

[@ryanmullen4482]

My favourite tool has to be the 1/4 flex head ratchet

[@georgef1176]

My snap on ratchets are the best. Fast ratchet and never break. I put bars on my 3/8 and use it as breaker bar and I’ve never had an issue

[@Gordochava]

My most favorite is 312cp. I use them every day

[@obilingful]

My favorite is the 10in adjustable wrench, thing is amazing!@ SNAPON

[@dustinkinard4032]

Snap on Flex head ratchets are 💯 the best next to all snap on haha love the build

[@softplasticsfishn]

Favorites are - flank drive ratching wrenchs standard and metric

[@jaredb9504]

My got to is the 3/8 14.4 electric ratchet

[@panel11111111]

I only have a flat blade screwdriver in the Snap-on brand. Just slow on building up my kit.

[@wftseriously6694]

Can't go to work without 1/2 inch drive flex head SHLF80A best ratchet ever made

[@tylernol42689]

My 3/8 6 point metric deep socket set.

[@rafatrill]

Is there a additional KZbin channel with more indepent videos on the build.

[@zaccook9515]

Air ratchet is my favourite

[@encampmentify]

My 3/8 14.4 impact 👊🏻👌🏻

[@Jackhammer909]

3/8" ratchet is my go-to

[@austinthomas7147]

14.4v line is my favorite

[@Westendorp86]

My cordless 3/8 14.4 ratchet & impact are constantly being used.

[@saadaqh2293]

My long flex head 3/8 ratchet I was every day love it

[@jackduffy5493]

My go to is my snap on 3/8 long ratchet

[@BassKingTV-ni6zd]

Pwz 2 makes my life so easy for pulling of boom filters on putizmister

[@willyqueen4066]

Thanks great video and my is old 1\4 ratchet .

[@ShouldWeStrapIt]

The 14.4 3/8 impact

[@edwardpalau8098]

I like Butane gas soldering iron kit

[@thund3rcat321]

Ph3050 air hammer. Best in the biz!

[@144019jans]

I love snap on ratchets any and all of them are great love the flexhead longneck 3/8 the most i think though

[@patrickfitzhugh2995]

I always use my 3/8 flex ratchet

[@Omri.Collects]

No snapon engine hoist?

[@jgarcia108]

I wish I could afford one of those new EUV, one of the tech at the local Dodge dealer just got one in the green and it is awesome!!!

[@joeypiccolomini9104]

Using my snap extra long 3/8 handle ratchet daily

[@michaelalligood5809]

eect900 circuit tester for sure! Way better than power probe

[@hubcity091]

Go-to is my 3/8 long handle flex head what would I do without it go team snap on @SnapOn

[@justinbritten4476]

3/8” Flank Drive Semi-Deep Impact Swivel Sockets

[@lukelanam6045]

I dont have any snap on tools but i wish.

[@Isaac.232]

My flank drive plus spanners

[@restorods3374]

3/8” swivel head comfort grip ratchet

[@tcasey9792]

Flank drive plus combination wrenches

[@RayRay-qt2ew]

My long flex head 1/4 ratchet

[@rflbotello]

Beutiful car the EUV

[@darrendrew3865]

All my snap on tools, but most used would be my 3/8th ratchet.

[@julianmaga9632]

My 3/8 14.4

[@stevenwysocki474]

Honestly your adjustable wrench, a friend recommended and I will never use another brand again

[@jcc8833]

3/8 locking comfort grip ratchet

[@ranimartinez1375]

To pretty for my work shop or maybe I’m jealous:)

[@g5spfan]

3/8 comfort grip ratchet

[@josephgrammar6694]

1/2 digital torque wrench

[@supdus]

i have ever owned a snap on tool

[@jimysk8er]

Could you guys please sort your from the ground up playlist so that viewing is done in chronological order? It's weird having to hit previous every time I want to watch the next video.

[@larryborkstrom3580]

1/4 drive long handle ratchet

[@Bigborerevolver]

Carbureted with this thing having AC an all the proven EFI choices availible today? come on!

[@jackdipper7686]

Ratcheting wrench flex head.

[@maxvolovich9407]

I am glad I did not watch this at home with the wife watching me watch this I would be living in that box that i would love to get

[@maxvolovich9407]

My 14.4 set is my bread and butter makers ratchet 3/8 impact and long neck 3/8

[@rafatrill]

I dont own snap on tools can't afford them

[@pauljames1978]

5:54 I like that welding helmet its called the Morbid >> shop.snapon.com/product/EFP2MORBID its a auto darkening welding helmet like my 3M Speedglas 100 Welding Helmet that i used when i was working in a air vent factroy for 4 years

[@GCraigmile]

O’look!! Some guy that knows NOTHING about tools!!

[@wftseriously6694]

Sorry fanboy SHLF80A