WLtoys F949 2.4GHz, 3Ch, RC Airplane with 500mm wingspan, EPO (RTF) + BoldClash F02H Pro on board

[@81hermit]

Hi to everyone! More info about WLtoys F949 RC Airplane (+ spare parts) you can find here: bit.ly/3cSVhtz. Links to FPV setup you can see in description under this video.. If you have some questions - please ask, I will try answer to you. Please LIKE (thumbs up) if you like this video, also please subscribe to my KZbin channel. Thanks for watching. P.S.: bit.ly/3cYc26D - All-In-One Small FPV Cameras

[@81hermit]

@Horselover 7574 if you need small AIO FPV camera, then look here - bit.ly/3cYc26D + I add this link in description under this video

[@ivanbrest7650]

As always very good video. Can you tell me when we can see how flies another airplane, which you show in your video on 03:38

[@81hermit]

This is prototype still in developing

[@RayeedsCrafts]

Could you please tell me how did you bind fs r6b receiver to this transmitter? i did not find the binding key. if you have video on this that will be great for me.

[@81hermit]

Need use bind cord with r6b receiver. Install bind cord into bind pins (r6b receiver), turn on airplane transmitter, when transmitter is beeping - power on r6b receiver. When transmitter stop beeping -> turn off r6b receiver and turn off airplane transmitter. Plug out bind cord from r6b receiver. Now turn r6b receiver (without bind cord) then turn on airplane transmitter. That is all.

[@RayeedsCrafts]

@@81hermit Thank you very much. So quick reply. I will try it and let you know if i am success. After watching your video i bought this plane. Today i found that my flysky t6 transmitter is not working properly. Channel 1 is not working properly. Thanks a lot again. it will help me definitely.

[@RayeedsCrafts]

@@81hermit Unfortunately this procedure did not work for me. Could you plz any other way. i need to bind this very badly. :(

[@81hermit]

​@@RayeedsCrafts Probably you use one of the latest versions which has a little bit another protocol

[@RayeedsCrafts]

@@81hermit I think you are right. I bought it very recently and it has stabilizer system. And I found an extra 's' after model number. Which is F949S. Could you help me binding this updated transmitter with flysky receiver? Thank you.

[@alex18780]

Can I bind this transmitter with an frsky receiver??? I wait for an answer

[@81hermit]

Hello. F949 transmitter not support FrSky receivers. But can be binded with Flysky receivers

[@alex18780]

@@81hermit ok thank you

[@81hermit]

@@alex18780 you are welcome

[@VasillisRaptis]

i have problem with mine...a few test and to all the plane couldnt go straight..the rudder was at the middle ,the throttle at about 60%,and i l some times i ve lost totally control..i think something is wrong with the transmitter.New alkaline batteries for it but...any help?I am new at the hobby and i want to know if i do something wrong or the palne ore the transmitter!Thanks and sorry for my English...

[@81hermit]

If airplane not fly straight try to make fine tuning using trim button fo Rudder (look here 02:10). About losing connection (transmitter and airplane): How long your airplane can fly using one fully charged battery? Probably battery is dead? If airplane`s battery OK, then you will need to check antennas in transmitter and on airplane`s receiver. Probably antennas have bad soldering to PCBs or very curves.

[@VasillisRaptis]

@@81hermit Thank you for the quick reply!As i see now at the monitor are all in the middle,looks ok..i(remember i am new at the hobby!) ll see at the next test and le you know..iff the problem is at the transmitter or antenna i am afraid i cant do something..the plane battery looks ok..more than 15 mnutes i think..

[@81hermit]

@@VasillisRaptis At what distance does the connection between the transmitter and the airplane disappear?

[@81hermit]

@@VasillisRaptis Are there telecommunication towers and mobile communication antennas near of the field where you flying on airplane?

[@VasillisRaptis]

@@81hermit Not much..about 40 meters..and i almost loose the plane at some trees..imagine i turned down the thruttle to stop it but that still goes on cirkles..

[@giovannicaronte6330]

Hi, do you think the dell f949 transmitter is compatible with the fs2a 4ch? Thanks

[@81hermit]

F949 transmitter must be compatible with fs2a 4ch AFHDS Receiver, If new versions of F949 still use AFHDS protocol

[@giovannicaronte6330]

@@81hermit A ok Perfect... let's hope so... thanks, and congratulations for the video.

[@81hermit]

@@giovannicaronte6330thx for feedback and you are welcome

[@Chuqlez]

What are the L and H on the controller for this plane? I can't figure out what they are! If someone could be of service I would be appreciative! Thank you! -Charles

[@81hermit]

This is Normal and Dual rates for rudder

[@vajiullahkaffashi4710]

Olá amigo como bindar o rádio no receptor turnigy (Hello friend how to bind the radio on the turnigy receiver)

[@81hermit]

About binding WLtoys transmitter with turnigy receiver - install bind cord into "bind" pins on your turnigy recever then turn on you receiver (receiver must fast blinking), after some time turn on the trasmitter - receiver must stops blinking - this is mean - binding is completed. After all, turn off recever and transmitter, pull out bind cord from receiver. Then turn on transmitter + turn on receiver. That is all. kzbin.info/www/bejne/bWq9Y6R9rtStq68 + look description under this video (here you can find additional information)

[@dimitarkrastev7493]

Hi , How can bind it with Flysky ?

[@81hermit]

If your plane use old protocol then you can bind it with Flysky transmitter. Push and hold bind button on your transmitter module then turn on the power. After that turn on your plane. You can check, move throttle stick up? if motor works - binding successful

[@claudiofonsecaa1492]

Meu sonho ter um avianzinho desse jeito de presente

[@81hermit]

Next time use English please

[@kyrylokozhumyaka1136]

why need three motors for one propeller?

[@redlines2535]

The more the merrier

[@81hermit]

As say manufacturer - three motors needs for more thrust and smoothness in the air

[@munkskyline17]

How long is the flight time??

[@81hermit]

up to 15min

[@munkskyline17]

@@81hermit wow thanks for the reply 😄. Would you recommend this f949 for beginner like me?

[@81hermit]

@@munkskyline17 If you need airplane -> better to choose with 4ch control. Something like this (XK A800): kzbin.info/www/bejne/nZCodqCNr52dg6c (goo.gl/lVEKFI)

[@heklik]

Can this bind on xk k110 helicopter transmitter ?

[@81hermit]

No. It use flysky protocol

[@gutunerigutner1011]

Bisa terbang berapa jauh gan

[@flightsim_xy]

Good video! I want to buy it. 👍✈

[@81hermit]

thx for feedback. you can buy it here bit.ly/3cSVhtz

[@argemiropereira817]

what is the price to ship to Brazil???

[@81hermit]

may be free shipping

[@argemiropereira817]

@@81hermit please, how much is the price to ship this model airplane to Brazil!???

[@81hermit]

@@argemiropereira817 Free Shipping. Price 42-57$, depends from seller

[@Jasbirkaur20180]

Very nice plane

[@81hermit]

fully agree with you

[@Синьорпомидор-э6л]

Coooool 😀☝️👍✈️

[@81hermit]

yeah

[@escooter13]

why doesent my plane work?

[@elslepwing3264]

very nice rc airplane for me

[@81hermit]

for beginners will be good, but you can add a little money and buy some better rc airplane

[@crddrones3457]

Thanks

[@81hermit]

you are welcome

[@RS-wj4fn]

Kupia sie go fajowy fliger 😁

[@81hermit]

I don't understand you. Next time please use English

[@lavaman4089]

wltoys good brand, but for airplanes remote needs 4ch control

[@81hermit]

Yes. WLtoys also budget brand with cheap spares

[@tovardgarold4510]

wltoys. I also want this plane

[@81hermit]

You can get it here bit.ly/3cSVhtz. Next one week for WLtoys F949 you can get discount

[@samimoring1235]

cm..hahaha not inches, but cm's lmfao

[@chitragor4021]

Thoda bolo bhi

[@81hermit]

What you mean? Can you translate to English?