vgr v 653 its own top knife and jrl lower standard knife works perfectly
@edounboxingofficial Жыл бұрын
Good to know
@barber_andii413 Жыл бұрын
Wait Im lost so If I keep the small one that came with the vgr and put a Jrl the big blade (outside) of the blade right?? You say it work better??
@barber_andii413 Жыл бұрын
I need to know because I have the clipper (vgr) but Its still inside of the box because I dont like that blade that can with.. I wish I could of put the wahl stagged blade cus that would out been something nice
@SVMFHAIKALBINBASRI Жыл бұрын
so which one blade good & fit for wmark ng9002 clipper?
@emrhcaglar4 ай бұрын
How to make Wahl deluxe home blade ??
@darwinbontoc-nh5bn Жыл бұрын
Madeshow is fit to work 💯
@JoseGarcia-cu8gs Жыл бұрын
Can you share a link?
@jrouse1965 Жыл бұрын
Yeah that what I put on mine be quiet too
@JoseGarcia-cu8gs Жыл бұрын
@@jrouse1965 Did you use the Madeshow M5 Standard Blade?
@kebosanan1231 Жыл бұрын
which madeshaw blade?
@mayronebp Жыл бұрын
a little oil on the blades reduces the noise
@edounboxingofficial Жыл бұрын
It's not about oil.. I think it about the motor
@syeikhnasrul1521 Жыл бұрын
Thanks amigos!
@edounboxingofficial Жыл бұрын
Thanks
@syeikhnasrul1521 Жыл бұрын
@@edounboxingofficial Yo edo . What about cutting performance? You prefer?
@edounboxingofficial Жыл бұрын
@@syeikhnasrul1521 kemei 2296
@JoseGarcia-cu8gs Жыл бұрын
Do they cut better with the different blades?
@edounboxingofficial Жыл бұрын
Yes, it cut better if you change the cutter blade
@setiakawanjtm7814 Жыл бұрын
Super experiment top
@claudioeloi84 Жыл бұрын
do you think that with a ceramic blade it does not improve its noise?
@edounboxingofficial Жыл бұрын
I don't know
@rinpuiakhawlhring3494 Жыл бұрын
Please review vgr v653
@andreiagyo2043 Жыл бұрын
Hello! Are the madeshow, wha fox and JRL blades the same? They look the same as you said, but what about the quality?
@edounboxingofficial Жыл бұрын
Yes, they are the same
@andreiagyo2043 Жыл бұрын
Thank you for the quick response! I like your work. Keep it going!
@sampitz Жыл бұрын
Nice bro❤
@edounboxingofficial Жыл бұрын
Thanks 🔥
@klembute10 Жыл бұрын
Subtitulo please, soy español.👍
@edounboxingofficial Жыл бұрын
I guess Subtitle will come later... I don't know why KZbin is delaying the subtitles
@klembute10 Жыл бұрын
@@edounboxingofficial No problem, So I can improve my English. :)
@chegui.b.b.b165 Жыл бұрын
Edo check the cam follower I had the same problem. Mines came broken on one side.
@edounboxingofficial Жыл бұрын
Ok I will check
@JoseGarcia-cu8gs Жыл бұрын
where can I find the correct cam follower for the NG-9002 ? I keep finding the one's that fit the wahl clippers which is different.
@JoseGarcia-cu8gs Жыл бұрын
No cam follower replacement are available.
@WreckItRalphyTV Жыл бұрын
So the kiepe hybrid blade fits ♥️
@edounboxingofficial Жыл бұрын
Yes..fusion blade, monster hybrid blade
@WreckItRalphyTV Жыл бұрын
@@edounboxingofficial so the monster clipper hybrid blade also fits?
@edounboxingofficial Жыл бұрын
@@WreckItRalphyTV it the same
@WreckItRalphyTV Жыл бұрын
@@edounboxingofficial thank you bro I'm interested to buy this one yes yes yes yes ♥️
@thelizard3500 Жыл бұрын
Bro Edo how to remove the notch from kemei 2296
@edounboxingofficial Жыл бұрын
Check my old video
@thelizard3500 Жыл бұрын
@@edounboxingofficial can u give the link, coz I check there is nothing
@user-qt8sg8pf4w Жыл бұрын
I've changed blades, all brands, which just won't work
@edounboxingofficial Жыл бұрын
👍🏾
@ramonroman7739 Жыл бұрын
Change the camfallow
@edounboxingofficial Жыл бұрын
I will
@JoseGarcia-cu8gs Жыл бұрын
@Kerwin Catayas do you have a link to the correct cam follower that will work for the wmark ng-9002 or the VGR 653?
@edounboxingofficial Жыл бұрын
@@JoseGarcia-cu8gs for now I don't have link but I'm still searching
@JAYEKAZE Жыл бұрын
Bit sure why you all want to go back I to the past with these noisy magnetic blades
@robsonsantos8629 Жыл бұрын
Me arrependi de comprar a vgr653 não corta nada, dinheiro jogado no lixo
@matte5144 Жыл бұрын
The best???
@edounboxingofficial Жыл бұрын
Not good clipper
@claudioeloi84 Жыл бұрын
@@edounboxingofficial Why don't you find a good machine?