wolfcraft MASTER cut 1500 - work and machine table

[@wickeddubz]

I have this table, here is some feedback: it is really helpful and versatile if you have limited space. It will never replace professional table router, table saw, etc. but for occasional work it can do the job if you have straight hands. If you have a lot of space to build workshop with pro tools - go for it if you want. Replacing the tools is not too long , but takes some time. Adjustment and check can take about 10-15 min, power tools are not toys. Jigsaw is not very handy to use with table, because there is gap between jigsaw plate and the detail. The blade can wobble, so your cut will be less precise, especially if your wood is thicker than 10mm . Flat aluminum guide is rubbish, because it's too short and it is fixed only from one side. When plastic screw is tightened well, aluminum guide starts to rise above the table surface. Anyway, i'm not complaining in general, just sharing my impressions and experience. this table is very helpful in general, sometimes you just need to be more creative , and you can do a lot more than shown in this video.

[@shaquedelilicss7849]

Dear mister Wolfcraft I would like to request you to produce a fence that is longer then the present one and that the fence can be clamp on both sides, as from my experience at the present form it is not as convenient

[@wolfcraft_com]

Dear +RR SS, Thank you for your proposal. I have passed it on to our product manager. Best regards JMa

[@kevinfitzmaurice-brown1683]

The video gives the clear impression this table can be set up and changed from one tool to another in minutes ! More like hours. Its very fiddly and setting it up is not easy. changing from saw to router would take and hour at least !

[@St0ne6reaker]

you are totaly right. preparing to cut is definitely torture.

[@ozguraltinkaya2155]

Do I need to buy extra guide plate to use milling machine?

[@richardsanders5266]

Is the Master Cut 1500 going to be made available in the U.S. anytime soon? This seems like a REALLY handy tool with the ability to attach circular saws, routers and jigsaws.

[@jmawolfcraft9035]

Richard Sanders Thanks for the interest in our product. For questions about distribution in USA, please contact [e-mail]. Best regards JMa

[@didtoknan8128]

So the answer is no.

[@josedejesusrianochaguala4245]

hola, desde Colombia ya compre el master cut 1500, tego un pequeño inconveniente los conectores originales son redondos (macho y hembra),aquí con planos por lo tanto no he podido energizar el master como tampoco puedo conectar las sierra, necesito los adaptadores sera que ustedes los venden, segundo , en las especificaciones técnicas el toma corriente dice que la tensión es hasta 230v , en mi país la tensión mas común es 120v, se puede conectar a esta tensión sin problema? nagradezco su respuesta

[@wolfcraft_com]

hola jose, muchas gracias por su interés en nuestros productos. Por favor, póngase en contacto por su pregunta [e-mail] . saludos, JKa

[@mohamedaly1982]

How much

[@danielebohrer7565]

Qual valor e onde comprar?

[@wolfcraft_com]

Hola Daniele, encantados de saludarle y ayudarle en todo lo que esté en nuestra mano, le confirmamos que el precio depende de cada distribuidor sin embargo puede ver un ejemplo de una tienda online donde comprar el producto en el siguiente enlace 👉 amzn.to/2ZqgGGK

[@johnjakees4843]

Never cut wood with 2 hands on both sides of the saw (like in the video). Never. Just don't do it.

[@johnjakees4843]

​@@slipa1 for the lazy people a link 1:30

[@johnjakees4843]

@@slipa1 oh and 1:24

[@Geyesphoto]

i want this !!

[@St0ne6reaker]

could you send me the advertisment guy to montage my saw on your table. because its like nightmare. Expensive and none handful table. and there is no riving knife in box content. just dissapointed. Bunun yerine direkt tezgah testere almanizi öneririm kanser eder bu adamı. Ayrıca kutu içeriğinde yarma kaması yok. daire testerenizin yarma kaması yoksa bir de kama parası vereceksiniz. Ben Türkiye'de bulamadım amazon.de den yarma kaması aldık mecburen. O yarma kaması ile testere bicaginin üç saattir hizalayamadim. Paramızla rezil oluyoruz.

[@wolfcraft_com]

Good day +Aybars Taşkıran, I'm sorry that you have problems with our master 1500. If you have questions, please contact our customer service [e-mail]. Riving knife is as a separate accessory available (see packaging). Because the most machines have a riving knife. Best regards JMa

[@axerise]

I have one question, i bought this table and i have bosch professional jigsaw but on battery. how to be always on i mean when to start i have to hold button non stop?

[@wolfcraft_com]

Hello there. Unfortunately, the machine table MASTER cut 1500 cannot be used with battery-powered machines. For safety reasons, it is mandatory to use machines which run on the mains. The machine needs to be plugged into the safety switch and then turned on/off via the safety switch. The machine button needs to be fixed in the ON-position via the included switch clamp. Only with a machine which runs on the mains it is possible to turn off the machine quickly via the safety switch if there should be a problem while sawing. Best regards, wolfcraft Team

[@axerise]

@@wolfcraft_com oo i see, thank you very much for the answer