Wonderful Homemade Jack for Car

Jacks for your Workshop or Garage
SUBSCRIBE-goo.gl/gYkBdJ
Other video!!!
Popular videos-goo.gl/KZCCXW
Awesome life hack -goo.gl/SCZiAr
3 Drill Machine Life Hacks You Should Know-goo.gl/7Ckdfh
How to make -goo.gl/g2Ph4P
Welcome to MR SUNY channel
Our channel include of guiding videos:
- Life hack
-DIY
-How to make
-Awesome ideas
-Tips
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!

[@VM-ke3cm]

The jack had to be short enough to go under the car and that tire was not flat. If that tire was flat and the wheel rim was nearly touching the ground, the jack would be too tall to fit under the car. Also the jack will not raise high enough to get the tire off the ground. It is way too slow. And even in the best of conditions with the car sitting on a flat surface, it seems too dangerous

[@PeUrmeleMantuitorului]

Greetings from London! 🇬🇧

[@rubenbutalan385]

Thanks brod

[@JeromeBill7718]

I'm starting to think that Sun Y is the local hardware shop where he lives.

[@mikelewis5900]

Thats a good idea for a level stand but not a jack. It didn't go up high enough so you had to put something under the car to support it while you added extra wood under the jack itself.

[@FenderBender503]

This actually is a smart idea. Would you use it in every situation? No... but if your car didn’t come with a jack or you wanted something small to keep in the garage? Yea it looks sturdy enough. You wouldn’t want to lift it much higher though, and you shouldn’t leave the car supported without a jack-stand anyways.

[@sullygully1976]

Could have just bought a 2 ton bottle Jack for $15, save the time and effort, not to mention being more efficient and just as compact.

[@oppaone9617]

its diy project...did u read the title??

[@sullygully1976]

@@oppaone9617 did you read the part about saving time an effort. One of the most stupidest pointless DIY considering a bottle jack already exists for next to nothing in cost.

[@duwonrhee3589]

bottle jack is for temporary lifting but this is sturdy enough to be car stand

[@sullygully1976]

@@duwonrhee3589 and a set of car stands can be bought for $20.

[@duwonrhee3589]

@@sullygully1976 yeah but can't be fine tuned for the height. you will understand if you use them

[@santiagopaz369]

Está muy bien tu trabajo... excelente diría yo ☺️ perro si le pones un balero de carga abajo de la tuerca que haces girar para que suba el automóvil te será más fácil y con menos esfuerzo 😏 Yo tengo dos de diferentes tamaños (altura) que ocupo como gato para levantar el coche y funcionan muy bien. Ánimo y mis más sinceras felicitaciones 🍾

[@jeraldds3802]

Very good design

[@freesoul9324]

Very simple and useble

[@rudigerpinkenburg7050]

Waste of time. This thing is not stable, unsafe and only damaging the car. Better use the jack from the onboard-toolset.

[@poon589]

Bingo! 👻👻👻

[@joaobatistasantos4714]

Não vejo problema, desde que feito por um soldador profissional

[@ДобромирБлагов]

Good idea!

[@DanielDaniel-ox9co]

Practice ur welding more I would suggest it

[@gabobonn2987]

good work👍

[@CreativeJahirul]

Gabo-G visit

[@huron162]

"9 hours later"

[@jbnrusnya_should_be_punished]

Simple but not effective. but the car and tires are excellent!

[@gilmarfernandes5168]

Parabéns pelo vídeo ótima idéia.

[@MrCreativeBOYBD]

Nice tool bro

[@CreativeJahirul]

*awesome work sunY*

[@TienNguyen-xu2ov]

Good

[@franciscohenrique6771]

Muito bom, parabéns 👏

[@vikramsingh4178]

What is the solution of safe the indl and troops. Kindly give the video

[@SatisfyHacks]

Awesome.

[@peterbready9488]

Absolutely frightening. If you raise the bolt too far it will simply fall out and the car will come crashing down.

[@elrafa76]

Si tenes un auto como ese comprate un gato hidraulico directamenteeee😲😲...buena idea!!che pero soldaste una tuerca adentro del caño??supongo!!!

[@jondoel7104]

Not good, the thing was bent at the end and one plank went mysteriously to 3. go buy a jack, they are not expensive. It beats having your brake disc buried in the driveway with your hand under it.

[@yardlimit8695]

jon doel,,,,,,,if he went and bought a jack like you or i would do,,,,,,,,,,he wouldn't have a reason to make this video.....

[@dannyyo7948]

Amazing and magic, those pieces of wood got more. Plus this is a death trap of Magic tool. This is how to make your girlfriend single.

[@leonruvalcaba1549]

I like when other guys' girlfriends become single

[@anasanas-ky5qm]

Nice

[@ميثمابوتمارابوتمار]

احسنت النشر

[@javierdiaz17]

Excelente 👏👏👏👏👏👏👏👏

[@MrExtremehany]

For my opinion the screew are not stable. It's very dagerous use it your lifting device for have goods.

[@yardlimit8695]

petr hanak,,,,,,,,could you please repeat this in ENGLISH........

[@chennaichaitanya427]

Super

[@245Raghu]

What is the bolt and nut size, please specify.

[@prithvirajkanne]

Liked and subscribed for the idea. Good effort my friend.

[@z2a119]

Really?

[@prithvirajkanne]

@@z2a119 in the world or criticizers and buyers he is the innovator.

[@percypizarro7657]

For that , I'll just stay with my car factory Jack is much safer

[@nfacrocks7877]

Takes nearly as long to jack the car up as it did to build the jack!

[@vishalkumar5483]

It could be go lower or not?

[@tikeshwarsahu2513]

वेरी गूड

[@jeffroman9175]

Whats the size of the bolt?

[@harbindersingh6446]

But my car tool box is already occupied with jack 😜

[@yardlimit8695]

well, if you make this one you'll have 2 jacks..........the only problem is,,,,,,,will both of them fit in the car tool box......let me know how it works.......looking forward to hearing from you.

[@harbindersingh6446]

yard limit My car tool box has no extra space for another jack

[@stevehamilton4458]

It need make thread the on the plate for nut?

[@yardlimit8695]

steve,,,,,,could you repeat your comment in ENGLISH ,,,,,,,,,,,,,,,,,,,,,,,,,,,PLEASE

[@tandre1975]

Wagenheber wäre natürlich zu umständlich

[@Aryan_ff-r5y]

Nice vedio

[@MrSoothingjazz]

I'm waiting for you to show us how you got it under there and how after half way up you stacked wood under the jack. You clearly couldn't fit jack under car and then it wasn't tall enough. Good invention but not for your BMW

[@pipedreams57]

too small and too slow for a car jack but would be an ok design for a floor jack under a house.

[@zundapp80cc]

Men with a BMW series you don't have a hidráulic jack. I'm from Portugal and I don't use Manualy jack. With a hydraulic jack I made a bearing press. See my videos

[@larrywhalen127]

IF you are going to use this as a jack, fine, just spend another couple of dollars for a box end/ratchet wrench which would make the process MUCH quicker, plus the base should be at least 12" wide by 1/4" thick steel - but if you're able to afford a Beemer, just drive it down to Harbor Freight and buy a bottle Jack for $15.00, for Christ sake !

[@biblestuff1107]

Great, if you're not in a rush😄

[@kalervolaukkanen1273]

Höpö höpö eipä ole kovin järkevää

[@sadiqkat1]

The bold is likely to damage car in this is too short a weight of car I don't think the bold is enough

[@androidken]

You should put a nut or a tack weld on the end of the threads inside... This way the jack stops before fully extended ... Otherwise you might overextend while lifting the vehicle. Just my thoughts.

[@den_polansky]

На БМВ накопил, а на сраный домкрат зажал))

[@mtechnical3724]

Music name in this video

[@regnardin]

Safety ! Safety... o.O

[@ИгорьФилософ-ъ2ъ]

А велосипед не пробывал сделать ?

[@Lazarus27]

Игорь Философ, ну молодец ведь! Согласись.

[@user-so4kl6st2o]

Игорь Философ Кому задан твой вопрос-ни-о-чем ? Автор не поймет твой сарказм. А тогда смысл юморить?

[@topmusicSU]

Possible music address

[@inventor5820]

Why you make this this when you car have a new one near spare tire ?

[@roberto.h.g.3591]

SÚPER**👌 : )

[@ededmund5685]

you should look in the TRUNK they come with jacks .. WHAT THE FUCK ARE YOU THINKING

[@adamsonpilotos6644]

Does your car dont have a free jack?

[@miguel_909]

The wrench cost more than a jack

[@topmusicSU]

Возможное название музыки

[@marcoscastillo2772]

No puedo creer......tiene un BMW y una llave mixta nuevecita y no puede conseguir un gato para levantar el auto.

[@MartinHernandez-nq4kc]

Jajajaja el hombre realizó una de las pelotudeces más grandes que he visto...

[@ΓάκηςΤσουμάνας]

Well dude you have BMW and you do not buy a safe jack?

[@Mocking69]

これ俺使うとイライラしそう（汗）

[@idontknowmuch3441]

Why bother w the spray paint? It still looks like a jenky piece of crap

[@faisal6583]

ليتهم امرحوا خسارة الوقت اللي ضيعته على خيبتك

[@georgedeaney7270]

Shoddy. Poor weld, dangerous and jacks are never put under the flat part of the sill. The car is always raised with a jack under the designated part of the sill lip - the strongest and safest.

[@mdscownz]

How does one have all these metal working tools, scrap metal, a welder... ect but no jack.... just buy a fucking jack and dont risk your life with something so janky. You could always use the jack that comes with youe car too...

[@shreyas.kulkarni]

Sorry to say, but this looks like an accident waiting to happen. Hope you didn't seriously pursue it after this.

[@NicoSmets]

No. Just... no. Lots of problems there.

[@1951osiris]

Es una idea poco creativa .Esa marca de automóvil , no necesita rueda de auxilio pues está equipado con inflador especial . Es la mejor manera de enseñarle a los delicuentes a robar una rueda de BMW Patético el video

[@PaulSmith-vw1hr]

useless . We want to know how it only just fitted with 1 piece of wood at the start, then at the end there was more wood and the "jack" was removed with the bolt half extended. You not being true. Use correct jack!!

[@jaffarsiddique7898]

Please buy a proper car jack, don't be miser with BMW

[@yardlimit8695]

jaffar,,,,,,,,you make it sound like he BOUGHT the BMW and he's out of money for a jack.......he could have stolen it and found out the jack is missing.......

[@michaelfitton4645]

2 words, "ratchet spanner".

[@wizrom3046]

That is a terrible jack design. Too high when compressed, not high enough when expanded, too unstable, too slow and annoying to jack up. 4 fails... 👎👎👎👎

[@vadl8458]

БМВ и домкрат из болта больной

[@moseskp1780]

Wast time

[@eksine]

terrible idea

[@ericfernandes569]

Waste of time and energy

[@wiggyb854]

What a complete waste of time👎👎

[@13freitag13]

how much i hate this fucking music on nearly every building video

[@peterboissiere9684]

I bet ur arm is tyerd

[@leonruvalcaba1549]

I dont want to be flattened by my own car

[@user-lw8jk6nv7l]

You sometimes have some good ideas, but I wouldn't trust that with my life.

[@roberttill3787]

a jack is only a lifting device, you should never trust it you should use an axle stand as the safety support

[@yardlimit8695]

why not"? he's got the other 3 wheels on the ground, if the welds are bothering you just place a large rock next to it as a jackstand.......UNDER THE FRAME,,,,,,,,,,looks safe to me

[@MrTopsoil911]

Did he ever check bolt and nut strength rating?

[@vlstyles]

Not safe, my friend.

[@CreativeJahirul]

Varian Styles hay

[@JeromeBill7718]

That's you you slip 2 jack stands on each side.

[@bandicoot__]

😂😂😂😂😂😂😂😂😑😑😑😑😑😑😑 stupid idea

[@jackdolido9876]

More than perfect. I am stupid. However, I got the idea.

[@Навигатор-н2д]

Совсем, видать, житуха тебя скрутила.

[@МельникОлег-я4й]

Опять шедеврально-бестолкавая идея )

[@sergeyosin9238]

К вечеру одно колесо поменяешь с таким домкратом

[@Nestor11962]

Наверно все деньги ушли на покупку машины и не осталось на покупку домкрата.)))

[@1stattempts775]

I love the concept, I was looking for inspiration on a similar but very different project. Btw who cares what others think. Keep making dope stuff, just because you want to.

[@muneer24]

Who cares what other think? I am all about ignoring hater but please don't ignore safety. Not only are you putting yourself at risk but anyone who decides to go and replicate this and ends up overloading it past it's capacity. It's a good design but make sure it can withstand the load capacity. It won't take must to sheer off those threads

[@johniriansyah3989]

Bang pipanyq ukuran berapa dan bautnya ukuran berapa

[@Chris-lz7sx]

Terrible design. Will take forever to jack up the car. Unsafe. Buy Proper jack.

[@andyz790]

No never do this!! This is how people get hurt or killed. If you are too lazy to go and buy a cheap set of jack stands that have been rigorously tested. You shouldn't be anywhere near the underside of a car. Because if you use this "diy" you probably don't know what you are doing and you can do much more harm than good to that car and your wallet.

[@JoseAruquipa-b3f]

Va que momento suelda la tuerca al tubo a rehacer el video

[@SamVieiraGuitar]

Man, are you serious? It probably takes you an hour to lift just 1 wheel. Cmon man, you know better than this.

[@pasquariello72]

Yeah good onya. Paint it all black so it covers all that cocky shit weld That thing is ridiculous

[@MostefaMatallah-bd3bh]

Bravo,simple et facile,merci beaucoup.