Lofi-12 XT: Quick Guide of the Powerful 8-track Sampler

[@CKTDSTUDIO]

Great tutorial that makes you understand all the potential of this magnificent sampler, a very prosperous future is expected for Sonicware. Thanks for your commitment and time, thanks for existing

[@xuneezana]

You are the greatest bro. You have shared so much of your knowledge for nothing in return. N i appreciate that. I have grown from it and i am always thankful.

[@Woochia]

Thanks, it means a lot :)

[@JCtheMusicMan_]

Software solutions are great but this hardware 8 track sampler looks far easier to use! Thanks for sharing such a useful tool! ❤

[@carrachokyspace6941]

Thank you man!!! that was a a very nice intro to this machine!!!!

[@spvidz]

Nice choice of kick 😉

[@issmodissmo1485]

Hahaha 🤣

[@martinausdeutschland]

That was a nice an very helpful introduction to me, many thanks! 🙂

[@ChrisLodyMusic]

Hey man thanks very much for the shout-out 🙏Nice to see you've got to grips with this, I've had a lot of fun with it personally! By the way i didn't even know about being able to hold a pad to trigger sampling until i was reading the manual yesterday 😄

[@limbicbits]

Me neither 😂 - (what a bunch of professionals...)

[@Woochia]

Haha same! I learnt that the auto-roll could be triplets if you hold two directions on the D-pad at the same. I discovered it in the manual AFTER finishing this video 😅

[@ChrisLodyMusic]

@@Woochia Ha glad it wasn't just me then! No surprise really though, they really packed in the features this time 👌

[@Woochia]

@@ChrisLodyMusic They really did, and without much of menu diving 😯 It's pretty well designed for that, and makes it really fun to use!

[@videolabcreators]

Great video, looking forward to more lo-fi xt vids🎉

[@DJDigitalJosh]

This little sampler is loaded! Wow!

[@mikevanderheiden]

Thanks man!

[@SonicVibe]

Great information

[@limbicbits]

Thanks for including the IDM Demo Track in the beginning! Great review btw

[@Woochia]

This was my favourite, it sounds so good! :)

[@Jux925]

Looks dope!

[@xmeoff]

Very helpful, thanks 😊

[@pidgeo202]

Great vid :) what are the reverb n distortion quality like? lush n musical or a bit cheap?

[@duketranslucent3rd]

Nice video, nice device. Seems like a Digitakt without per-step parameter locking.

[@exhumus]

It has per step parameter locking

[@ivanvelez7668]

Hi there, great video on this product. I have question, what is the difference between the sonicware lofi-12 XT and the sonicware smpltrek?

[@Woochia]

They use the same hardware, pretty much, but the software inside is different. The lo-fi 12 XT is more sample oriented, like all the tracks are of the same type, and you have to use automations to use different sounds on one track. The smpltrek has different types of tracks, like drum tracks that allows you to load several samples on it. It also has a different ways to navigate the project... Both are pretty similar but it's mostly the workflow that is a bit different. Actually, since these have similar hardware, I wonder if you can install the firmware of one on the other, one ' case you want to switch 🤔

[@timkreutzkamp8519]

Uhhh, waiting for mine to arrive!

[@Woochia]

Hope you have fun with it! :)

[@LORANBELTRAM]

happy 1 mai !!

[@Woochia]

Thank you!

[@CKTDSTUDIO]

Hi, can you recommend a site that sells Skins for the LoFi 12XT? or even a way to make your own and customize them? Thanks for your time.

[@Woochia]

I actually never looked for skins 😬 I've only saw a few that were very cool looking in Sonicware's groups on Facebook, but apart from that I haven't noted a particular website :/

[@musicgonenova]

Great tutorial! I just wanted to ask, can you automate panning? I like panning drums left to right like a real kit. Thanks!

[@Woochia]

Yes you should be able to do that. For sure you can set different paintings for each element of the drum (as they will be on different tracks), and then you can automate any parameter on each track, including the panning (I have to check as I dont have the machine near me, but I'm pretty sure you can).

[@musicgonenova]

@@Woochia Oh, I thought you could put multiple drums on one track with Parameter Locking like the Liven

[@Woochia]

@@musicgonenova oh yes, with parameter locking, that's possible!

[@musicgonenova]

@@Woochia Great, thanks!

[@dinogoldie9716]

I have questions: Q1: Can the drumrolls/ratchets be set to triplets? Q2: Can it record off-grid performances? How unquantized can it get? Q3: How much menu-diving is there? Q4: Is the Decksaver cover for the Smpltrek compatible with this machine too?

[@Woochia]

A1: Yes! If you hold two directions on the D-pad (like right + down for example), you have triplets. A different triplet for each diagonal. I actually learned this from the manual after I made this video. A2: Yes. Each note has a micro-timing setting to offset it from the grid. So by default everything is recorded unquantised, and you can adjust it by pressing func + a step button (where you can see the automations on a step). A3: everything is pretty much at 2 button presses away at most (each pad of the top line of pads is a different menu, and you can access a 2nd page by tapping the pad again). This is really not bad I think. The only part that felt a bit menu-divy was the sample selection when you create track. Though the tag system and the ability to browse by folder makes it decent. Menu-diving will more for configuration and more specific stuff. A4: A priori, it is the exact same form factor than the smpltrek so it should work yeah.

[@Wrzlprnft]

about Q4: i bought the Smpltrek Decksaver for the Lofi-12 xt and it fits

[@LucasSilva-xi7ug]

Hey man, I really really really appreciate the content you put out and I'm so thankful for it. I want to make a donation but I can't really subscribe to the Patreon given my financial situation. Is there any other way to donate but in a single time donation? I know I'm gonna learn a lot and I really appreciate that man.

[@Woochia]

Thanks a lot man. You know, only donate if you can absolutely afford it, but if you'd like to make a one-off donation, I think the easiest way is to use the super thanks button here on KZbin.

[@toslinked]

is this like a cheaper version of the digitakt?

[@andrewrex6099]

I’m new and I’m starting to make dawless beats but I’m stuck between getting sp404 mkii or lofi 12 xt. what do you think is best choice for me as a beginner?

[@Woochia]

I heard a lot of good about the sp404 but I actually never looked it up myself. So I would be able to do a fair comparison... But there's something I need to try with the Lofi-12XT. It's seemingly the same hardware than the SmplTrek, so I wonder if you can install the firmware of the SmplTrek on the Lofi-12XT, meaning that if you get bored of the Lofi-12XT you can maybe turn it into another (similar) machine.

[@michaeldefondaumiere5948]

J aurais juste une question ? Lofi12 ou bien Lofi-12 XT ou bien les 2 car j'ai en projet de prendre le Lofi-12, méga synthesis, 8 bits et le Lofi-12 Xt dans les prochaines mois pour les coupler avec mon sp404 mk2. Merci pour vos vidéos

[@Woochia]

Lofi-12 XT je dirait. Beaucoup plus de fonctionnalités, plus de pistes, pads sensibles a la vélocité. Niveau specs, c'est une version bien améliorée du lofi-12.

[@michaeldefondaumiere5948]

@@Woochia merci beaucoup d'avoir pris le temps de répondre, et votre réponse m as fait me reporter vers le Lofi-12 XT.

[@fredicagoillanoise1309]

Can you record multiple sounds on one track like having kick and snare on one track and can you record track mutes into your sequences?

[@Woochia]

You can use several sounds on a track by using automation, like shown in the video. Or you can use resampling to record a kick and a snare on a same sample, then use the sampler slicer to play both part. Both track mutes, I don't think you can automate them, but you can mute tracks while resampling if that's what you mean.

[@fredicagoillanoise1309]

​​@@Woochiathat's nice if you can mute tracks while resampling. So I can create an edited and arranged version of my original sequence.

[@ConnorArbiter]

How to export or mixdown a song?

[@deroden724]

Is it battery-operated?

[@Woochia]

You can use it with 6 AA batteries yes. I always used it with the power supply though

[@notowen990]

yo website dont work cuh

[@Woochia]

Which do you have a problem with?

[@cooksoni.a]

Hello please.

[@DJSKWhirl]

Your videos are kind of a beating to get through.

[@Woochia]

Elaborate?

[@Metroplex313]

Nice video but you are bit too fast. take your time. be not fast with explaining and showing. I have to slowdown the video ))

[@MarcoPolux]

Very cool, it's like a portable Digitakt. IF it only had GRANULAR engine, darn!!!!! why can't there be a perfect one! (I am sure SonicWare will make a separate one that's granular, but, why separate? profit? ok, sell it as a separate module!!! but on the same device... "portability" )