thanks for showing us that for the idea, i am going to make something like that for myself.
@TonysCoolTools8 ай бұрын
Jean I know several of my viewers will take the idea and make one of these. I’m glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@KNLFirewood8 ай бұрын
Another cool Tool!
@TonysCoolTools8 ай бұрын
Mike it really is cool, you’ll get to check it out. Thanks for watching and commenting 👍TCT 👍
@DanielAtkinsFirewood8 ай бұрын
Yes, some of us could make it. However, sometimes it is cheaper to purchase the tool as it gives us time for what we need to get done.. I do see where it could be fun in making stuff too. Thank you for the ideas Tony 😉👍
@TonysCoolTools8 ай бұрын
Daniel, I agree it’s cheaper to buy a tool many times but you don’t get the satisfaction of making it yourself. Thanks for watching and commenting 👍TCT
@roncaron-l1r8 ай бұрын
Good morning Tony great tool love it ( ty Ron great video
@TonysCoolTools8 ай бұрын
Ron glad you enjoyed the video. It really is a handy tool. Thanks for watching and commenting 👍TCT
@BertsCustomCuts8 ай бұрын
Limb wood was the reason I built the $200 firewood processor. Keep up the good work Tony.
@TonysCoolTools8 ай бұрын
Yeah your processor makes quick work of limbwood. Thanks for watching and commenting 👍TCT
@ChrisLascari8 ай бұрын
Good idea, I immediately thought about how one could be built really inexpensive
@TonysCoolTools8 ай бұрын
Chris I have no doubt you’ll figure out a way to make a similar product. Thanks for watching and commenting 👍TCT
@brianprange80498 ай бұрын
Nice handy tool. The thing I didn't like is that it wiggles while cutting. Thank you for another great video
@TonysCoolTools8 ай бұрын
Brian I typically use my smaller saw (MS261) and cut as far back on the saw as possible to eliminate the wiggles. Thanks for watching and commenting 👍TCT
@FredFlintstone218 ай бұрын
Wow! Very cool! You got alot of cool tools Tony!
@TonysCoolTools8 ай бұрын
Glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@bfoutdooradventures8 ай бұрын
Good review tony, too bad the company went out of business. I could see this being very useful since the limb wood is the hardest to cut up without dulling a chain. It may take more time and steps to load the accessory, but it would save time with changing chains and sharpening. Have a great day.
@TonysCoolTools8 ай бұрын
Frances it’s a bummer the company went out of business after just under 10 years. With ability to use any 2” receiver it really is a handy and practical tool. Thanks for watching and commenting 👍TCT
@mikehughes20268 ай бұрын
Necessity is the Mother of invention- very handy tool there Tony, I have the Logosol Smart Holder like you showed- think I like this better! Thanks Tony!🇺🇸
@TonysCoolTools8 ай бұрын
Mike, there are many options out there that work really good. Thanks for watching and commenting 👍TCT
@rickthelian22158 ай бұрын
Yes a better way especially on the tractor to save your back.😊 Now a review on N&N 5x10 trailer, now Chris has one😊
@TonysCoolTools8 ай бұрын
Rick that would work really good to cut inside the N & N trailer. Thanks for watching and commenting 👍TCT
@dantabler93018 ай бұрын
Great video, sadly or happily this video didn’t cost me any $$$. I really wanted one 👍 Please keep on making videos ⭐️⭐️⭐️⭐️⭐️
@TonysCoolTools8 ай бұрын
Ha ha Dan, sorry I couldn’t help you spend some of your hard earned dollars. Thanks for watching and commenting 👍TCT
@leovogelgesang43988 ай бұрын
Thats a great tool Tony Thank you for sharing tools that will Make America Great Again
@TonysCoolTools8 ай бұрын
Leo, glad you enjoyed the video. Not sure if this was a US or Canadian company. Thanks for watching and commenting 👍TCT
@jlhaslip8 ай бұрын
Good to see your videos again. I have not been getting notifications lately. Don't know why, but it seems to be in order again.
@TonysCoolTools8 ай бұрын
I mentioned in my last video I was traveling and had some big projects in 2014 so I would be putting out a video every other week. Not sure why you wouldn’t be getting notifications? Thanks for watching and commenting 👍TCT
@richardbrowne16798 ай бұрын
Thanks Tony- I have a Jaw Boss, it works pretty well. I can’t say I use it anymore. I built a sawbuck and all my limb wood goes in that.
@TonysCoolTools8 ай бұрын
Richard, I’ve not used the Jaw Boss but it does look handy. A sawbuck works awesome but are typically to big and not portable for many people. Thanks for watching and commenting 👍TCT
@gregzais92488 ай бұрын
Hi Tony! Definately a cool tool! Thx for sharing. A less elegant solution is to use tractor forks and put the branch between the forks. 😬
@TonysCoolTools8 ай бұрын
Greg the pallet forks is what I’ve used in the past as well. Thanks for watching and commenting 👍TCT
@markd91053 ай бұрын
I should've looked years ago for products like this.
@TonysCoolTools3 ай бұрын
Mark, sad this company went out of business. I talked with a fabricator about possibly making these and he’s looking into the feasibility of producing these.👍TCT
@larrykluckoutdoors82278 ай бұрын
Nice video, great looking tool Thanks Tony
@TonysCoolTools8 ай бұрын
Larry, glad you enjoyed the video. It’s definitely a useful tool. Thanks for watching and commenting 👍TCT
@clubdoraoutdoorsandfirewood8 ай бұрын
Hey there Tony, that can be a very useful tool. I’m always looking for products to make the job easier. Thanks for the video . Take care
@TonysCoolTools8 ай бұрын
Allan, I agree I’m always looking for tools that make the job go safer and easier. Thanks for watching and commenting 👍TCT
@marksparkplug77588 ай бұрын
Thanks Tony, nice idea for DIY. Take care.
@TonysCoolTools8 ай бұрын
Mark, glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@scrhino408 ай бұрын
Very interesting piece of equipment to have in the woods. Wish I had 1 of them when I cut small wood. Bet it work for slab wood as well. Have a great day be safe
@TonysCoolTools8 ай бұрын
Glad you enjoyed the video. I agree it’s a handy tool to have in your arsenal. Thanks for watching and commenting 👍TCT
@jimmieburleigh95498 ай бұрын
Neat little set up. Makes you wonder why they went belly up.
@TonysCoolTools8 ай бұрын
Jimmie they were in business since 2015, I’m sure there are a lot of factors that caused them to close their doors. Sad because I think it’s a good concept. Thanks for watching and commenting 👍TCT
@kevinyonke67738 ай бұрын
After watching what a great idea. A couple of dimensions would be great.
@TonysCoolTools8 ай бұрын
Kevin here you go: 19" Length 9-1/2" Width 8-1/4" from front to start of angled box frame. The box frame that holds the wood is 8-1/2 tall and tapers to 3-1/4" in the back. Let me know if this makes sense to you. If you want to send me an e-mail, I'll take pictures with measurements. TonysCoolTools@gmail.com Thanks for watching and commenting. TCT
@geoffoutdoors8 ай бұрын
Hey Tony! Thanks for doing this review ... that is something i could definitely use. I am purchasing a deer hanger and pulley that attaches to my truck hitch. Anything with that type of hitch capability is gold 👍
@TonysCoolTools8 ай бұрын
Geoff glad yo enjoyed the video. The 2” receiver deer hangers are very nice especially when you’re skinning deer. Thanks for watching and commenting 👍TCT
@TwinCityFirewood8 ай бұрын
Very neat. Thanks for the information,, enjoyed it!
@TonysCoolTools8 ай бұрын
Glad you enjoyed the vide. Thanks for watching and commenting 👍TCT
@TonysCoolTools8 ай бұрын
Hey just found your channel, new sub here. Looks like you got some cool stuff. 👍TCT
@TwinCityFirewood8 ай бұрын
@@TonysCoolTools awesome!! I sure appreciate you taking time to do that!!
@DaveCollierCamping8 ай бұрын
Hope all is well for you. Take care
@TonysCoolTools8 ай бұрын
Dave all is good in 2024. Hope you’re good as well. Thanks for watching and commenting 👍TCT
@jeanvaljohn39218 ай бұрын
Happy New Year. Nicely done As per usual. The only caveat I see might be Lifting a 350 pound limb up and in too the device initially. The tractor loader arms or three point solve that, . But a pickup hitch receiver mount might prove problematic for more than a few of those over 55.. Best wishes for continued success. ( They need to send you $3,000.00 for a nice commercial)
@TonysCoolTools8 ай бұрын
Jean any of the limb holders are meant for smaller wood. You’re right anything too heavy I cut on the ground. You don’t remember but you commented a couple years back on a review video about the Wood Dock and you said if you could modify it to work on a tractor you would consider it. As I always say I’m not trying to sell anything just show you what’s available.😂 Thanks for watching and commenting 👍TCT
@billobermeyer6608 ай бұрын
Too bad they aren't still around Tony, sure seems to be a tool almost anyone could use!
@TonysCoolTools8 ай бұрын
Bill I agree it’s sad the company closed their doors. Thanks for watching and commenting 👍TCT
@outdoorsinthe6088 ай бұрын
That pretty cool! I like it👍👍
@TonysCoolTools8 ай бұрын
Glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@waynetharp8 ай бұрын
I imagine the Amish bundler makers could handle producing a few of these rather easily if someone shared the concept with them! Or any of the tractor accessories companies you work with as well...👍
@TonysCoolTools8 ай бұрын
Wayne that's an idea. I may pass that along to the bundler people. Appreciate you watching and commenting. TCT
@fatefarmspa8 ай бұрын
Very cool
@TonysCoolTools8 ай бұрын
Tom glad you enjoyed the video! Thanks for watching and commenting 👍TCT
@TheWoodSnob8 ай бұрын
I'm not a tool, I watched TCT!! 🎉🎉
@TonysCoolTools8 ай бұрын
Ha ha Dan, that’s awesome ! Thanks for watching and commenting 👍TCT
@bwillan8 ай бұрын
That wood dock on your FEL is a very versatile system for cutting those smaller diameter items. It's a shame that it's no longer being manufactured.
@TonysCoolTools8 ай бұрын
I agree it’s sad the company went out of business. Thanks for watching and commenting 👍TCT
@adirondackwoodsman8 ай бұрын
Love it Tony! Too bad it is no longer available.
@TonysCoolTools8 ай бұрын
I agree, sad to see any company go out of business these days. Thanks for watching and commenting 👍TCT
@brucearney95368 ай бұрын
Yup lots of this you can make yourself . A welder and cutting torch goes a long way !
@TonysCoolTools8 ай бұрын
Bruce, I agree there are a lot of handy Woodhounds out there. Thanks for watching and commenting 👍TCT
@mrMacGoover8 ай бұрын
I do weld and this wouldn't be that hard to make, thank you.
@TonysCoolTools8 ай бұрын
Several people have told me the same thing. Glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@donaldpainter9568 ай бұрын
That's cool it's just that a lot of trees I cut the limbs are 8 inches round and over the base is up 60 inches plus that's why people give them to me because most people can't cut something that big but small wood that could be useful
@TonysCoolTools8 ай бұрын
Donald that just means more wood for you. Thanks for watching and commenting. TCT
@Garlands_Fabrication6 ай бұрын
Nice Tony that is a cool unit is it easy to scoop a log into it using the tractor?
@TonysCoolTools6 ай бұрын
John unfortunately you still have to put one end of the log in the Wood dock. You are not able to scoop the end of the log and lift although thats a great idea. Thanks for watching. TCT
@InTheWoodyard8 ай бұрын
Very nice but I have to tell you it does look like you might be trying to compensate with that long pole sticking out there. Haaa!
@kurtloftfield45378 ай бұрын
That and the oversized chainsaw bar.... 😂
@DanielAtkinsFirewood8 ай бұрын
😂😂😂
@TonysCoolTools8 ай бұрын
Now Chris jealously doesn’t look good on you. 😂👍TCT
@InTheWoodyard8 ай бұрын
Ha! It's all I have! @@TonysCoolTools
@firewoodathome8 ай бұрын
Cool.
@TonysCoolTools8 ай бұрын
Thanks for watching and commenting 👍TCT
@richardwentland34898 ай бұрын
Swivel that over you N & N trailer to fill it with your rounds and swivel it back to reload. Thanks Tony Curly From Oconomowoc, with cheese of course!
@TonysCoolTools8 ай бұрын
Curly that’s a great suggestion, may need to try that. Thanks for watching and commenting 👍TCT
@willowcreekwoods8 ай бұрын
I got my log dock from fleet farm if anybody has those stores around. I also have a video on the log dock check it out. Good video Tony.
@TonysCoolTools8 ай бұрын
That’s interesting, I wonder if any of the Fleet Farm still might have some old inventory. I went to your channel but couldn’t find the video Thanks for watching and commenting 👍TCT
@MuhaloTube8 ай бұрын
I like that you can set the work height, but really that's too much touching of the wood. And you have to lift a whole log into place.
@TonysCoolTools8 ай бұрын
I agree with you there is a lot of touching of the wood but that’s the nature of cutting and collecting limbwood. Thanks for watching and commenting 👍TCT
@paladinid5 ай бұрын
Where can I purchase this product. I can't find it anywhere.
@TonysCoolTools5 ай бұрын
Im sorry, as I mentioned in the video the company went out of business about 6months ago. I know other manufacturers are looking to reproduce this tool. I will post an update if I hear anything else. Thanks for watching and commenting 👍TCT
@leonardryan87238 ай бұрын
TONY you put out great video buddy , yes if your in welding be easy little mod to make . KATHY and PAUL SHORT love 💕 making MODS for tractor 🚜 in BAY ROBERT Newfoundland Tony’s. My buddy BJarne butler in SCENERY WEST COAST in western Canada 🇨🇦 make me 😢😢homesick about 4 hrs ago sent me his u tube video off goats 🐐 up 🔝 in the foothills and beautiful little cedar logs 🪵 go to the ground . 😊
@TonysCoolTools8 ай бұрын
Glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@ReefMimic8 ай бұрын
I get tired of bending over too. If I do work in my garage I’ll get a folding ya out . 👍🏻
@TonysCoolTools8 ай бұрын
Me too, I hate having to bend all the time. Thanks for watching and commenting 👍TCT
@stephenrhodesianridgeback74188 ай бұрын
Any tool that makes cutting wood easier and safer is a no brainer .👍🇨🇦 . That’s why I designed my own pallet fork grapple that closes down too O too grab any size log too small limbs . No more soar back and a long lasting sharp chain . 👍👍👍 . Good review Tony as always 👍
@TonysCoolTools8 ай бұрын
Stephen your grapple sounds very interesting and handy for sure. Thanks for watching and commenting 👍TCT
@compostjohn7 ай бұрын
Assumes ownership of a car or motor vehicle.
@TonysCoolTools7 ай бұрын
And you know the saying about “assumptions “! Thanks for watching and commenting 👍TCT
@aldiminico65138 ай бұрын
Perfect to work Smarter,Not Harder. Nice piece of affordable equipment🪵👍
@TonysCoolTools8 ай бұрын
I totally agree with working smarter not harder. Thanks for watching and commenting 👍TCT
@outdoorswithlarryrobin8 ай бұрын
Hello Tony, Anything that helps the back has my vote ❄️🪵🇺🇸
@TonysCoolTools8 ай бұрын
Larry & Robin I totally agree. Thanks for watching and commenting 👍TCT
@tassiehandyman30908 ай бұрын
I'll be honest... dinging the soil and swapping out the dull chain gets old, fast. I went through 4 chains today, bucking 2 trees.. .🥵... I reckon I need to dust off my welder and see what trouble I can get into...😂👍🪓🇦🇺
@TonysCoolTools8 ай бұрын
Yup get that welder going. Here are the measurements in case you do. 19" Length 9-1/2" Width 8-1/4" from front to start of angled box frame. The box frame that holds the wood is 8-1/2 tall and tapers to 3-1/4" in the back. Let me know if this makes sense to you. If you want to send me an e-mail, I'll take pictures with measurements. TonysCoolTools@gmail.com Thanks for watching and commenting. TCT
@toddpacheco47488 ай бұрын
Another great 👍 tool and excellent video Tony 😮😊❤
@TonysCoolTools8 ай бұрын
Todd, glad you enjoyed the video. Thanks for watching and commenting 👍TCT
@markgoggin10158 ай бұрын
Good tool to keep your chain sharp.
@TonysCoolTools8 ай бұрын
Mark it definitely helps you keep your chain out of the dirt and gravel. Thanks for watching and commenting 👍TCT
@Frank-db6oj8 ай бұрын
Great job Tony. Thanks for sharing 👍
@TonysCoolTools8 ай бұрын
Glad you enjoyed the video. Thanks for watching and commenting 👍TCT