Рет қаралды 1,518
hello welcome back this week's project sees the realization of the classic wooden hammer in this project they use two different types of material the first wood will be this essence that I honestly don't know what wood it is but I can guarantee that it is very hard and made me suffer not little in the processing during the realization of the previous project the bed table if you are interested in the video place it or in the cards and below in the description
about 24 hours have passed since I put the clamps to block the wooden strips to do it world block now I remove the clamps and see how we can observe when I proceeded to glue them to form a single block I paid particular attention to the direction of the veins in order to glue them opposite each other to balance the natural tendency of the wood to bend to square the whole I will use the miter saw in order to obtain an object as uniform as possible
after making two holes with the Foster tip with the drill press I started exporting material using the chisel, however, I noticed that it removed more material than it should have, that avoiding errors due to a greater removal of material I started using the file for wood I was able to drill a homogeneous hole by removing the necessary quantity then I proceeded to make incisions on the handle for insertion and the hand itself in the hole made in the hammer head I will use these wedges that I made in different sizes to be used as needed
but we have reached the end of this project the material used to make this wooden hammer or mallet also comes from some pallet scraps present in the laboratory I can be considered extremely satisfied with the result achieved we are at the final greetings a nice LIKE and what is appreciated if you are written I invite you to do it and check the chapel to stay up to date and to exit the next videos share this video with his cash I just have to wish him a good weekend postponed to next Friday thank you for watching this video and good hello weekend