Make your own wooden fence for your table saw, stronger and more stable than what you get with your circular saw. INSTAGRAM: mbnwoodworking FACEBOOK: / mbnwoodworking
Пікірлер: 43
@mbnwoodworking24004 жыл бұрын
Hi guys! Thank you for watching this video, I hope you enjoyed the video. If it is, like it and subscribe to the channel for more videos like this.
@creativediycrafts99632 жыл бұрын
This is exactly what I need. I had a problem with my saw. Thanks.
@mbnwoodworking24002 жыл бұрын
And a second time 😊
@daiburt18333 жыл бұрын
That's a good one I've watched some that are overly complicated .I kept the fence that came with my Titan saw and glued a cheap level to it and cut a slot in the far end to slide an F clamp in so both ends are fixed I'm a bricklayer so I keep my woodwork simple but I liked yours 👍
@alexmartins9971 Жыл бұрын
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzbin.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
4 жыл бұрын
Hello my friend. Now you will cut better on the table saw. You made a nice guide. Sometimes the original parts don't work. This was a good idea. You did a good job. Congratulations. See you. greetings.
@mbnwoodworking24004 жыл бұрын
Thank you so much my friend 🌳🌿🍃🌲🌴😀
4 жыл бұрын
@@mbnwoodworking2400 👍👍
@Robe9993 жыл бұрын
Awesome job , thanks for sharing this , I have the exact same problem with my Ozito table saw , I know you get what you pay for , but it’s not fitness for purpose for me to spend that kind of money , but still would like to cut wood at the same size not every piece just a little out ????? Might have to give this a try again great work 👍
@lucastylemans43363 жыл бұрын
Nice video man. I have the exact same Parkside Tablesaw and the fence was also the first thing i removed and DIY'ed one myself but than in a biesemeyer steel tube fashion. Only took me a couple hours so yeah but exept from the crappy fence and tiny woble in the sawblade, the parkside tablesaw is very good for the price (100 euros for a freaking table saw new hahhahaaa)
@mbnwoodworking24003 жыл бұрын
Thanks man. I agree, for 100e it’s phenomenal.
@BartBijvank2 жыл бұрын
Great job!!!! Looks solid and accurate! But one thing, why don't you use the knife behind the blade? It should be there for safety reasons (kick backs). Greetz from Amsterdam.
@mbnwoodworking24002 жыл бұрын
Thank you. I also use a knife, but I took it off for other reasons, it was soon returned :) Greetings to Amsterdam :)
@manuelmarras36703 жыл бұрын
Bravo un bel lavoro pulito.👍
@mbnwoodworking24003 жыл бұрын
Grazie 😀👍👍👍
@milanstankov2813 жыл бұрын
Samo jako 💪
@Heseblesens3 жыл бұрын
While I applaud the skills and ingiunity I wonder why not strengthen and make the original fence longer, stiffer and more rigid as well as precise?
@burtreynolds31432 жыл бұрын
Nice job. May want to lower your blade for safety. ( I watched it on silent )
@mbnwoodworking24002 жыл бұрын
I will keep in mind next time, thanks for the advice. 🙂👍
@circulolectores48693 жыл бұрын
Good Job Friend
@mbnwoodworking24003 жыл бұрын
Thank you my friend 👍
@rusmansyahchanel36273 жыл бұрын
Nice video
@mbnwoodworking24003 жыл бұрын
Tnx man 👍
@sajadwoodwork3 жыл бұрын
Nice work sir
@mbnwoodworking24003 жыл бұрын
Thanks sir 👍
@HobiTukang3 жыл бұрын
Good Job
@mbnwoodworking24003 жыл бұрын
Tnx man 👍
@paweszram86683 жыл бұрын
Dobra robota ,ale omijaj ten śmieć parkside,bo to robione z kapsi po piwie!!!!, markowa tarcza zmieni twoje nastawienie po pierwszym użyciu , graty stary!!!
@basharhito51903 жыл бұрын
Thank you for posting this video. Any chance you can share the measurements ?
@mbnwoodworking24003 жыл бұрын
Thank you for watching. I can, of course, but it's best to contact me on instagram or Facebook. The links are in the video description.
@BalkanHandyman4 жыл бұрын
nice 😁
@mbnwoodworking24004 жыл бұрын
Tnx 😄👍💪
@thisiskdn2 жыл бұрын
Nice work, could do without the music, which I ended up turning off halfway as it was getting too distracting
@mbnwoodworking24002 жыл бұрын
I'il fix it next time 😀 Thanks for the comment 👍
@bigdaddysshop81803 жыл бұрын
Does no one talk and explain the process? I have a radio it I want to listen to music
@mbnwoodworking24003 жыл бұрын
the picture speaks more than 1000 say :)
@Mekanikhobi2 жыл бұрын
güzel
@kucukdunyam31964 жыл бұрын
Selam kolay gelsin başarılar 🎁🎁🎁👈☕️☕️☕️👈💐
@santiagoberlanga62902 жыл бұрын
No levantes tanto el disco que te quedaras sin dedos 😉
@ivanristic23902 жыл бұрын
Gde se mogu nabaviti ove tracice sa razmernikom/metrom?