DIY Garage Shelves / Shelf / Workbench / Storage / industrial

[@brawldawg8729]

I just happenedbto come across your channel. I respect your humility, honesty, and your willingness to show that you are learning. In addition I appreciate that you are sharing your production growth along with that of the channel itself. This channel looks to be a must watch particularly for the new guys and weekend warriors, without being "dumbed down"

[@WoodNerds]

Brawl Dawg I really appreciate you taking time to provide feedback! Everyone screws up, I figure it’s better I do it first so nobody else has to, and we all can learn from it and become better together. I am also detail oriented naturally so I really like to explain the reason for each step (although not everyone likes that haha). Thanks again, hope your weekend projects are going well!

[@timheyyyy4873]

Bingo brawl dawg bailed it!!! 🤣

[@tonyruiz2448]

Brawl Dawg stated almost exactly what I would have said. I appreciate noting the errors and not trying to be "Perfect" in woodworking.

[@WoodNerds]

Thanks Tony! I appreciate you man!

[@suduratnappuly2777]

(

[@yxngbambi2762]

Shout out to you, two years later and you're still helping someone!

[@WoodNerds]

Thank you! I’m happy my videos have been helpful! Cheers!

[@kierank9522]

I love how this guy shows his mishaps… too many videos of people making it look like a piece of cake with no problems… this guys shows dropping stuff, messing up screwing Philip head screws, top shelf not 100% stable, garage door catching, boxes in storage area… this makes this guy unique, this is more real and I LOVE IT!

[@WoodNerds]

Thank your so much! Every project has its issues for sure! Glad my mishaps are at the very least entertaining haha. Cheers!

[@rickatyahoo]

I really really appreciate a channel that makes a ton of stuff, and makes it well, without having a $5000+ arsenal of power tools. Makes it feel achievable.

[@WoodNerds]

Thanks Ricky! All those tools would make the job a lot easier for sure, but I know exactly what you’re talking about! Some of the most intricate stuff was made by hand, so anything is possible, just takes time.

[@tacojesus]

lol its always "watch how easy it is to make this SIMPLE desk" then heads on over to $150,000 woodworking shop.

[@ondeckwithmikesteuart7989]

So.... I came across your video on Tuesday, thought it looked very doable... at least you made it look that way. Ordered all the lumber on Wednesday, bought a Kregg’s jig, a couple of saw horses, and began clearing out my work space, located the studs, marked exactly like you did... Thursday my lumber arrived and I started measuring & cutting, I just followed along with your video... and by Friday afternoon I was done with everything except for the pegboard! I couldn’t believe it!! My previous carpenter skills consisted of repairing fences! I can’t thank you enough for all your help.

[@WoodNerds]

Hey Mike! That means a lot man! I’m happy to hear the video was helpful. It’s literally just one board at a time and you can build anything, just takes time. I appreciate you stopping by to let me know it worked out for you! I hope you enjoy, and get a lot of use out of it! Your comments and feedback are always welcome!

[@markdesimone2838]

As other people said I appreciate that you show us the mistakes instead of trying to hide them and fix them in the shadows. I'm newer to woodworking and this actually helped a lot. Trying to get some ideas for my garage but I have a smaller length due to vehicles. but this motivated me to start drawing some stuff up. Thanks again man.

[@WoodNerds]

Thanks for the feedback! In the projects that I make mistakes I’m definitely trying to point them out to help! Good luck with your build! I hope it turns out well! Cheers!

[@chrishudson6255]

Built this almost exactly the way you did, with a few things different. Thank you for throwing this video up, I have watched it probably 10 times as I put this thing together. Bought the lights, worked great. I encourage anyone to give it a shot.

[@WoodNerds]

Thanks Chris! I appreciate it man! Hope you enjoy your new workspace!

[@amberglines874]

Would you suggest this for someone that's never really built anything? I'd like almost exactly this build, but for a craft room. I'd probably want it for my shed out back too but idk, it's not a great shed and idk if I'd make use of it in there. It depends how hard it ends up being to make just the one.

[@johnbory5162]

I’m an old DIYer…I spent a good part of my life framing houses…I enjoyed your video, but most of all I loved your honesty…reporting on your mistakes actually HELPS a lot of people…remember…we ALL make mistakes…GREAT JOB

[@WoodNerds]

Thank you John! I truly appreciate it!

[@zocalo1990]

Not a thing to be embarrassed of my friend..just pure opportunities to learn

[@SynchronizorVideos]

Wow, a DIY project that's actually DIY. Simple but effective design that pretty much anyone with very basic tools can pull off. Very nice video; I built my own garage shelving in a similar way, although mine are free-standing for flexibility and because my current place is a rental. Here are a handful of thoughts based on my own experiences, for viewers who are looking to try something like this themselves. •Home improvement & lumber stores can also cut your 2x4s for you if you do your planning and bring a cut list. They may charge a small fee, but it can save time overall - especially if you have limited power tools. You'll need to put in some more effort in the planning stages to generate that cut list, though. •For cutting plywood with a skill saw, a saw guide kit can really help keep those long cuts straight & square. These are pretty inexpensive and can help you get cuts as clean and straight as you'd get from a table saw. •If you don't have the equipment & know-how to do pocket holes, you can also get steel brackets to assemble an equivalent joint. •For the screws, do yourself a favor and pay the little bit extra for Torx or square-drive screws rather than Phillips. •If your shelves are mainly just used for totes & boxes, OSB can be a more cost-effective material than plywood. Either way, I prefer to screw those down rather than nailing them down. It takes more time, but it's easier to reconfigure or repair in the future. Likewise, gluing can become a headache down the road. •For the workbench, melamine board makes for a much nicer work surface than bare plywood, although you might stick with the plywood if it's really going to get a lot of rough treatment. But for a general-use garage workbench for the average homeowner, melamine board is really nice. •Finally, any workbench needs power outlets. There are lots of different options for this, but all of them will work better, go in easier, and look cleaner if you think ahead and make the wiring & outlets part of the original plan rather than an afterthought.

[@WoodNerds]

Great additions! Thank you for watching and contributing!

[@ritzenhoffbv]

After watching the video advert i was still skeptical. But when i finally downloaded the plans kzbin.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

[@flying4thrills]

Tyler, let me add my sincere thanks for your time making the video. Your plan was just what I was looking for in my small garage, and helped immensely with my build! I don’t think I can post a photo, but I’m really happy with the finished product. Thanks again!

[@WoodNerds]

Hey Frank! Glad it was helpful! Hope you enjoy your new space as much as I am enjoying mine! Thank you for stopping by to share!

[@bcorbett8400]

"Hey Boss, I cut it twice and it is still too short!" Love the video and great tips and info. We all make mistakes and I learn more from mistakes rather than always doing everything right all the time. Thanks 👍

[@WoodNerds]

Lol! That’s exactly how it is! I agree, mistakes teach powerful lessons! Thanks for watching!

[@DoNtCaReBrO_305]

There's no other video on KZbin that perfectly explains everything. Nice job man.

[@WoodNerds]

Thanks man! I appreciate that!

[@abhikainsaan]

Calming voice. Excellent common lingo explanations. Most of all, you explained and accepted your mistake like a great man. Keep it up brother. May God bless you and your family. Ameen

[@WoodNerds]

Thank you so much Syed! Bless you and your family as well! Thank you for watching!

[@rexseven6907]

When building shelves like these, I have a recommendation...because they will ALWAYS end up with more weight than you anticipate. Put vertical 2x4s between each shelf. Both behind the front boards that you screw the shelves to and against the wall between the shelves. This takes the weight off of the fasteners and transfers it to the floor. Shearing off the screws is possible. Collapsing a vertical 2x4 is much more difficult. My two cents.

[@WoodNerds]

I appreciate it Rex! Been considering an update video on this as it’s been a hot topic. Thank you for the recommendation. Cheers!

[@eric8675]

For sure. A couple of cuts and they're more than likely just cutoffs laying around.

[@MarkSWilliams27]

Nice build, and no doubt a very useful addition to your garage. Just one nitpick: level is horizontal. PLUMB is vertical. Thanks for the video. Happy New Year.

[@WoodNerds]

Haha thanks Mark! Happy New Year man!

[@charitylewis4280]

I would love to give my husband a unique Fathers Day gift. This is perfect I'm so glad I found it

[@WoodNerds]

That would be and awesome gift!

[@dooovde]

You're giving him wood?

[@darylwalker7524]

I don't even understand what this means? The gift of an idea...?

[@charitylewis4280]

Giving him a functional work space to do projects he enjoys. Some ppl like practical things as gifts.

[@stopdrinkingleftskoolaid6510]

WOW! How awesome of a wife are you that 1) You have the skills to build something like this and 2) That you would think of building it for your husband. He's one luck guy!!

[@live4theleafs364]

When you can detail like this guy and crap on ur mistakes for learning, I love it!

[@WoodNerds]

I really appreciate that! Thanks for watching and taking time to comment!!

[@guillermomackenzie1780]

Thanks!

[@WoodNerds]

Dude! Guillermo! Thanks, man! I appreciate it! Cheers!

[@cwilks5592]

Awesome build. Love to see people using homeowner tools to create good stuff. Don’t always need $5k in tools for the home jobber. Also, love those lights. My garage had a single horror film light in it. Put 8 of those in to brighten it up. Work great.

[@WoodNerds]

Thanks for stopping by! I agree! You can build a house with a handful of tools! I really like these lights. I made a separate video where I fill my garage with them and they perform perfectly.

[@robertleogoetz]

Really cool build! I have a couple suggestions from builds I've done in the past. One thing I would recommend is to not glue and nail your plywood. If you end up wanting to change the layout or want to replace it with something else down the line it is going to make it a pain in the butt. Same with your worktop, you'll eventually scar it up pretty good and being able to just undo some screws and replace the board makes it super quick and easy. The final suggestion is to spend the extra money and get high quality decking screws. Torx heads are 1000x better than Phillips and they also are designed to hold lumber together and do a great job at it. I love the video and have subscribed to the channel. Keep up the awesome work!

[@WoodNerds]

Thank you Robert! I appreciate it! Great suggestions!

[@classicalguitarstudent9562]

1/2 way through and already looking very good. I was amazed it's so strong you can do pull-ups on it. Good work all around.

[@WoodNerds]

Thank you! It’s pretty darn sturdy.

[@CurmudgeonExtraordinaire]

Being able to hold your weight is the very minimum standard a workbench should be made to. Hell, when I cedar lined my wife's closet and replaced the rods, my standard was that it needed to be able to hold 400 lbs at any single point on the rod. The previous rod had collapsed due to her trying to put so many clothes in a space that was that size. Anything worth engineering is worth OVER-engineering. For a workbench, you should shoot for being able to hold the entire weight of a diesel engine. This means building things with the wood in compression and not having it entirely supported by the shear loads of screws. I built a motorcycle dolly for my Harley and it easily supports the 800+ lbs (empty weight) of the bike while also being easy to move around. The casters that I used were taken off of two furniture moving dollies which were rated for 1000 lbs each, so theoretically my motorcycle dolly should hold 2000 lbs. With the weight of the motorcycle, fuel, and me, it's got around 1000 lbs on it. Everything is in compression and the carriage bolts are just to keep things from moving in sideways directions. www.monkeywrench.space/diy/motorcycle-rolling-platform.htm

[@WoodNerds]

Grumpy OldMan that’s awesome!

[@WithLoveAndkindness]

Thank you. I'm going to make this for my husband as our anniversary gift.

[@WoodNerds]

Congratulations on your anniversary! What a cool gift to give!

[@robertbennett6627]

Once I decided I wanted to put in some garage shelves and a work bench I came to KZbin. I think I watched about 5-6 different videos here and I decided to model mine after yours for a couple different reasons. First, we have a bunch of the same bins as you and secondly I have a large window in the wall where I wanted to do my build and the large open work bench could be adapted to surround the window. I am finally done with my build save some electrical and lighting that is still needed. YES! I wish there was a way to share pics/video as I am pretty happy with how it turned out as I was also on my for the entire build and I am relative novice, this being the biggest, most complicated thing I have ever attempted. Thanks for your sharing!

[@WoodNerds]

That’s awesome Robert! Thanks for letting me know! I’m glad the video was helpful! I’d love to see photos! If you have an Instagram you can send me photos there and I’ll share them with my audience.

[@robertbennett6627]

@@WoodNerds Will do.

[@classic287]

OMG 😱 That's BEAUTIFUL. I've done my shop over so many times. Now I'm going to have to do it again. I love the cubby hole with the lights. You did a fantastic job. 👍👍👍👍👍

[@WoodNerds]

Thank you! I’m really pleased with it! Working on another shop upgrade video now. Keep an eye open for it.

[@signguy73]

I’m own a garage door company and this is just my opinion. Please don’t build shelves near or around your springs or tracks. It just makes it harder for a door technician to service or change your door down the road. I love the project and the detail.

[@WoodNerds]

Thanks Ryan! I appreciate you sharing your professional perspective!

[@floomagoo7397]

if I hire a professional it's because they know how to do the job, not because they need me to form the rest of my life and other projects around making their jobs easier

[@dalebama5239]

⁠@@floomagoo7397then you won’t mind paying more. Making their job harder means they work longer and that hourly labor charge gets higher. Make their work easier gets you better quality and lower bill. Or you can continue to be a jerk. Life is harder for jerks.

[@CHIOTIS1821]

7:29 I have barely any experience with carpentry. What’s the point of predrilling wood?

[@danvalg33]

​@@CHIOTIS1821 it helps to prevent the wood from splitting while inserting screws

[@honestychampmilland2007]

Great build but I would suggest one alteration. The additional shelf support/header should sit on top of the vertical 2 bys and not besides.

[@billbyrnes9505]

I like the fact, admire really, that you point out your mistakes, so as to inform your followers not to do the same. Remember to measure once, and cut it as many times as it takes? " I cut it off twice, and the darn thing is still too short." We learn from our mistakes!

[@WoodNerds]

I really appreciate that Bill! We all make mistakes (me probably more than most haha). I always wanted to hear them from others so I can learn faster! Thanks for the feedback, I’ll definitely keep this going.

[@amyoungil]

showing mishaps and the fixes is as instructive as anything else -- thank you.

[@WoodNerds]

I agree! Knowing where the easy to screw up parts are in a project is valuable! I appreciate the feedback!

[@Coppersaguaro]

State 48! Perfect timing. This is exactly what I want to do in the spare room. A nice work bench and shelving for all those bins that I have as well. Nicely detailed.

[@WoodNerds]

Thanks Adam! Good luck with your build! Let me know how it turns out! Cheers!

[@alpinewhite]

7:55 In looking at the structure, your workbench area is actually supported by nails/screws. Wouldn't it have been better for the workbench structure to sit on top of some 2x4s kinda like the way houses are built? This way, the load goes to the underlying 2x4s and not the fasteners. Good project, btw. Just constructive criticism.

[@WoodNerds]

You are absolutely right! It would be stronger the way you are describing. I might add some additional support (either columns or 45 degree braces) if I need it. I don’t believe there will be enough weight on these for there to be a real worry as is. I appreciate the feedback though!

[@alpinewhite]

The easy way to think about things when building houses is this: Imagine removing all of the nails and screws. Nothing should fall down from the weight alone. Lateral movement needs to occur before a collapse would happen. I think a knee wall under your workbench would do the trick. Again, good project. I like the way you present your material.

[@WoodNerds]

Augie Inciong I’ll definitely be keeping that mindset going forward. thank you for taking the time! I really appreciate it!

[@mexzcanninja7412]

@@alpinewhite Thank you my good man. Your example is just what I needed to remember it a life time.

[@DanielRichards644]

I built similar shelves for my garage, I have thought about adding a second 2x4 behind the vertical 2x4, but honestly we had some Timber Locks lying around so I just used those and i have no concern of anything moving, the wood would split before those let go.

[@RXavierDeLaVega]

Thank you for making such a fantastic video. This is EXACTLY the kind of video that I find the most useful. Everything from the crystal clear explanations, materials list, recommended tools, and even took an opportunity to share the shortcomings - all make for one of the best tutorials I have found online. Definitely and instantly subscribed and looking forward to more of your work. Regards!

[@WoodNerds]

Thank you so much! I really appreciate it! I’ll try to keep them coming just like this.

[@KillyBesel]

Man, that first little bit of the video MADE me watch the rest, and totally made me rethink my bench/storage idea.

[@WoodNerds]

Haha it was a fun project! Came out pretty nice!

[@md8744]

Simple technic that I never gotten thru. He put 2 bars to support the horizontal bar lie on without needing people help to hold but results come out perfectly. Thks bro

[@WoodNerds]

Of course man! Thanks for watching!

[@jerrybailey8055]

Nice build and you've left yourself plenty of room for add on options. Like someone else mentioned i might think about french cleat system instead of peg board, also you can build cabinets with drawers underneath. I've built a table saw cabinet on wheels that I roll under my bench.

[@WoodNerds]

Jerry Bailey that’s an awesome idea! I’ve been fumbling around with some ideas similar to that! Maybe a miter station as well.

[@samstein1822]

Nice build, someone isn't going to be happy that you glued the plywood to the framing someday!

[@WoodNerds]

Thank you! Haha! It won’t be that hard to remove. A couple precision cuts and it will come right off. But I’d love if I sold the house to someone who appreciates it more than sees it as an obstacle. I personally, would have loved to move into a shop or storage minded house. The residents before us were missing out.

[@julianbeltran9889]

Awesome camera work and editing.. dope instrumentals.. great marketing.. subscribed.. i’m a first time home owner and just getting started in wood working .. looking forward to more videos from you bro 🤟🏼🤓

[@WoodNerds]

Thanks Julian! I appreciate it man!! It’s a perfect time to learn! I’ll be doing a lot of home stuff!

[@brianz4948]

I've watched dozens of workbench videos, dozens, this one was the easiest to duplicate and follow. thank you!

[@WoodNerds]

Hey! Thanks for saying that! It means a lot! Thanks for watching!

[@brentjohnson6654]

Well done! I am looking to organize my shop in rear of garage and you gave me some ideas. I already have a 22’ shop bench but I need to put storage above it. My garage is 24’ x 48’ meta building. We put in an apartment in half of the back and shop is the other half. The fun I have is putting stud walls on the metal purlins. But the existing shop bench is against the OSB wall of apartment so no hardened metal to fuss with there. Again, thanks for your video.

[@WoodNerds]

Sounds like an awesome shop man! Good luck with your build! Thanks for watching!

[@Mr.B_Original]

Another good practice would be to locate the horizontal and vertical electrical runs in your wall prior to fastening the shelves to the wall. Most modern stud finders will also have a voltage locating setting.

[@The52brandon]

Just FYI, Harbor Freight has those same clamps you were recommending too. I say that because not only is Harbor Freight cheaper, but they also have a lifetime warranty. And while other brands may have a lifetime warranty as well, I've not found any clamps that were easier to exchange once they finally gave up the ghost.

[@WoodNerds]

That’s an awesome recommendation! I might have to go grab some to try out (could always use more clamps).

[@patriot9455]

@@WoodNerds to many tools???, that is like to many radios.

[@DIYMinded]

Great project! Thanks for taking the time to make and film it. Subscribed.

[@WoodNerds]

DIY Minded thank you! I really appreciate it!

[@cityglass8308]

Your disposition and communication skills are a breath of fresh air! Good job, thanks

[@WoodNerds]

I really appreciate that! Thank you!

[@jimpie231]

Great video! I recently did some similar shelves in my garage. I used the same kind of build, but I put everything together and then hung on the walls., shelving is 35” hanging from the ceiling. My garage is 10’ 6” high, floor to ceiling. I did 15’ of 24” shelving on the back wall and 36” on side 6’ long connected to the 15’ shelving. On the other side (entry to home here) of the back wall I put up a 36” deep by 48” shelf. All of these were supported by 5/8” x 48” long threaded rod going into my attic above the garage. I used no 2x4 supports on the outside. All lumber came from a neighbor who took his bed box support system out, and went to a different style bed. Hardware cost about $50. Thanks….Jim

[@WoodNerds]

That sounds awesome Jim! $50 for that much storage is a steal!!! We’ll be moving in a year or so and I’m trying to come up with ideas for my next shop. Might end up doing cabinets (for the experience, and because they look so dang nice!!!). I appreciate you watching and taking the time to share your build. Cheers man.

[@jimpie231]

@@WoodNerds I would have done more shelving, but the 36”x48” shelving is next to 2 oak cabinets that I bought, stained and polyurethaned in my previous home. I took these cabinets with me, and hung them in the corner, they are mud room cabinets. If you look hard you can always find cabinets for the garage, even for free when someone is remodeling. Thanks…Jim

[@tonsoffun49]

Great vid man. The honesty and such is refreshing. Glad it all worked out for you. You have my sub.

[@WoodNerds]

I appreciate that man! I feel it adds a little more value so everyone following along knows what to look out for and doesn’t screw up the same as I did! Thanks for watching!

[@Tylermccancecomedy]

I loved this video. I ended up using your plans to build my own storage/ workbench. It's great! Thanks!

[@WoodNerds]

I’m glad! Congratulations on your new storage/workspace! Thanks for watching!

[@tabithasherie3279]

I just built my first garage shelves yesterday. Thank you for all your tips, awesome build! I agree on the Power Pro screws I had to countersink prior to screwing them into the lumber, but they are a superior wood screw and worth the extra cost, Lowe’s carries them as well👍

[@WoodNerds]

Awesome tips! Thank you for watching!

[@mohin8256]

How much did a build like this cost you?

[@donrubes]

Just wanted to say thank you for showing us your set up. We managed to recreate your shelf and modified it to an L shape. And hung our bikes on the side. Thanks again!

[@WoodNerds]

Dude! Awesome to hear! Glad the video was helpful! Hope you enjoy your new space!

[@kathybluxome5514]

I really like that you explained the tools at the end! I’m a beginner and need guidance with tools!

[@WoodNerds]

Of course Kathy! I appreciate the feedback! Keep at it and you’ll get good in no time. Thanks for watching!

[@jonahsloven9931]

maybe I missed this.. whats the height and distance between shelves? Having a tough time figuring that out. Thanks!

[@osomxl]

Those storage containers are available at Home Depot for about $10 and are often on sale.

[@kingclown2323]

Those are actually from Office Depot... The Home Depot sells very similar, heavier duty ones. But yes they're often on sale.

[@peterharper9703]

Bro Hugz.. Great Job! Thank You!

[@WoodNerds]

Thanks man! Hope it helped!

[@royboybliss]

Somebody recommended this video to me. Excellent. Really appreciate the honesty throughout. Great job. I'll follow you. Loved the piece at the end with recommendations that are not sponsored. Again honesty works. Thanks.

[@WoodNerds]

Thanks Roy! Appreciate the support man!

[@blackattack2469]

Just found this video & I like your way of talking to us viewers & as a newbie you style & pace is very nice. Thank you for a great job & I look forward to watching, learning more & supporting.

[@WoodNerds]

I really appreciate that! Thank you for the support!!

[@AtomicGarage]

Automatic thumbs up for the cinematic sequence at the beginning!! Perfect

[@WoodNerds]

Thank you! I was hoping it would be a hit and not annoying to watch haha.

[@AtomicGarage]

Wood Nerds when you watched that sequence after editing it , you knew you had fire! Some content we as creators make are good, but then there are those videos we make that are GOLD. GREAT JOB!

[@WoodNerds]

I really appreciate it man! Thanks for sharing the love!

[@mvanalst2003]

Dude, I LOVE this! Thank you for coming back. Thanks!

[@WoodNerds]

Of course! Thanks for watching!!

[@rose8662]

Loved this. I learned a lot and really appreciate the "favorite" tool section at the end. Super handy info!

[@WoodNerds]

Thank you Rose! Glad it was helpful!

[@rossprivate5456]

firstly nice job , i also trust someone who shares their mistakes more than those who hide them. i'm a sparky who took a lot out of this video and would only offer one bit of advice and that would be to stagger the joins in your cable extensions just in case they were to fail in the future ,it also is less bulky and easier to hide . thanks for the video !

[@WoodNerds]

I really appreciate the feedback! I’m the same way. It doesn’t help anyone for me to screw something up and try to hide it haha. Thanks for watching and for the tip with wiring, I’ll definitely be using that in the future!

[@leeenglish6176]

Hey!! Don't knock yourself u done a great job!! I wish only I could duplicate it. Fantastic video.

[@WoodNerds]

Thank you Lee! I appreciate it!

[@jasonwills29]

I guess I’m a wood nerd myself! Great video.

[@WoodNerds]

Thank you Jason! Nothing wrong with that! Welcome to the club!

[@jasonwills29]

Wood Nerds Happy to be here. 😎

[@aaronwesley930]

This will be a great project for my dad and me! Thanks for taking the time to put this together. It says a great deal about a person when they can talk about their mistakes and what they would do differently. I will make sure to measure twice and save myself a garage door!

[@WoodNerds]

Aaron Wesley if you guys build it, I’d love to see the end product! I really appreciate you saying that! It’s easy to mess something up and a lot of us do. I’d rather mess it up first so no one else has to haha.

[@mattsconberg8225]

subscribed for the honesty. Thanks for being normal. stoked i found this, looking forward to everything you do

[@WoodNerds]

Thank you Matt! I appreciate it! More in the works!

[@gsperanza07]

I’ve built this exact shelf with chip board /day wall screws and YES ! It’s deemed cheap and will crumble !!!!! Using dry wall 5 - 6 “ inch screws , these will snap with SHEER WEIGHT ! And you don’t loose that much space doubling studding the post . And I don’t want to use a nail gun! BUT !!!!! I’ve used second support parallel double support inlay wooden studs , this will beyond strengthen and support , especially as i in Australia couldn’t find thin , strengthening screws as seen in post from the USA and double studding will strengthen and allow a crap load of weight !

[@WoodNerds]

Great point! If I build another, I’ll definitely be adding support between the shelves like that. Thanks for watching!

[@YulRun]

Great Video as someone getting into woodworking myself, loved the video.

[@WoodNerds]

Matt Janes I really appreciate it! I try to give a little extra info in the steps so anyone can complete the projects with me.

[@mixflip]

Randomly found uour video bro. Awesome shelves. I bught a house recently that came with home build shelves. I dont like them so I started searching for diy benches and shelves for garages. I love the size you went with. The entire wall!!!!!!! I have those metal shelves from Walmart too... and hate them. I'm going to go all out and buy alot of wood, a cordless drill and a nail gun like yours and try my hand at an epic sized bench and shelves. Thanks for the inspiration! Keep up the good work. I dont have a diy channel but I do make alot of overlanding vids. Maybe I can inspire you as well.

[@WoodNerds]

Thanks man! I appreciate that! I’m glad you found value in this video! I’ll definitely check your channel out! Thanks for watching and good luck with your build!

[@nateerickson7414]

Love this! Great work. Will be doing this when I am done finishing my basement. Earned a sub. Thanks.

[@WoodNerds]

Thanks Nate! Good luck with your new workspace!

[@lbyoung8420]

Always appreciate someone being upfront with their mistakes. 👍🏼

[@WoodNerds]

I appreciate you stopping by with the feedback! I’ll keep it up! Thank you!

[@JohnHill-qo3hb]

Good on you WN, not many YT DIY'ers will point out their errors, well done.

[@WoodNerds]

Thanks John! Always learning man!

[@agoodbogey]

I had created a vision with this other video and I saw yours and this was EXACTLY what I had in mind thank you it looks so easy cant wait ot get started on mine

[@WoodNerds]

Thank you! Good luck with your build! Thanks for watching!

[@jeffrey7012]

Dude, these are seriously heavy duty. The only thing left after a nuclear war will be cockroaches, Keith Richards, and your shelves!!!!

[@WoodNerds]

Haha! You must have seen Oppenheimer recently! I appreciate it! I’m still enjoying them. Might end up rebuilding for some cabinets to gain more experience in the future!

[@bajuracan]

😅 good point. They look very solid

[@bjornjoseph]

If I didn't need my 2 car garage for 2 cars, I'd definitely build this

[@WoodNerds]

Thank you! Pending on the size of your garage and your vehicles you might be able to get away with a more shallow shelf/bench depth!

[@dabj9546]

You probably don't need two cars?! Maybe you should make half of your garage a workshop!

[@lawofg2918]

I knew someone on KZbin would convince me to make my floating shelf more labor intensive and expensive. lol Great video, was building a full floating shelf along the back wall now I’m gonna make a mod like this. Thanks bro!

[@WoodNerds]

Of course man! Sorry to convince you to do more work haha! I love mine. Check my mobile bench build if you haven’t seen it already, a great option for a smaller shop! Cheers!!

[@timnash6870]

Tim from Canada if you were doing this shelving system. make the longer pieces go to the floor.. this way the floor supports the weight of your shelving when you’re doing your long pieces, make sure that the end up on the floor for support

[@WoodNerds]

Hey Tim! I appreciate the feedback and you watching my videos! Hope all is well up north!

[@hughes3947]

Dude, this is great. I’m attempting something similar and having seen this I will use your method. Appreciate the mistakes and tools advice. Nice work mate.

[@WoodNerds]

Thank you James! I hope it goes smoothly for you! Build on!

[@CMRWoodworks]

I see that you too are a proponent of the “the-wall-is-my-stopblock” method. I have used that method often. Cool video!

[@WoodNerds]

Thank you! The unmovable stopblock haha. Thanks for stopping by!

[@mvanalst2003]

Did you consider making French cleats for this project? I’ve never made or used them before, but they are on my “to do” list to give a try.

[@WoodNerds]

I thought about it! The peg board could be removed and replaced in the future! I haven’t personally used it before but it would be fun to try out!

[@Spread_love01]

I've made french cleats for a wall unit... It's pretty great to do

[@goodenough8984]

French Cleats in my opinion: are that they are good in theory but my shop and wall storage does not change often enough to utilize fully the french cleats for their modular design. Also it is sometimes limiting and the setup is quite a bit more work than what I think it is worth. Again this is just my opinion and lots of other youtubers use french cleats. I like just to use plywood and screw my holders to the plywood.

[@LeMans512]

I made these last year. They work great. EASY.

[@rteegarden]

Great job “Woody”! Love the down to earth style. No matter what, after 60 years at it, no house, or robe to large or small, when after completion, there is ALWAYS that same list of “ should have domes”. It’s what teaches us humility.

[@WoodNerds]

Hey thank you! Absolutely, every project has that list! Thanks for watching and dropping a comment!

[@chrisworkshop4657]

oh I forgot but the screws will spilt in pine I have had a few pieces do this but they are still awsome screws

[@WoodNerds]

That’s what I hear, especially kiln dried lumber.

[@APAS-br3ff]

ever flatten the tip with a hammer, should prevent that... I do it now for these projects. stand screw up on the cement floor

[@APAS-br3ff]

and of course pre-drill

[@EwokyBalboa]

The "no split" is more of a "less likely to" They definitely reduce splitting in 2x4s. I have a few minor splits every once in a while, particularly when close to the edge . Still seems to split the "select" pine 1x boards and oak so I still predrill those. I also still manually countersink higher grade plywood otherwise these kind of crush the laminate around the head

[@WoodNerds]

Those are really good tips. Thank you! I’ll have to keep that in mind about the high grade plywood’s. I’d be pretty bummed if it made an ugly mess with the expensive stuff.

[@mictheflash]

Looks great, thanks for sharing, especially the mistakes too. 👍

[@WoodNerds]

Thank you! Of course! Whenever I watch a tutorial on something, I wish they would tell me their mistakes so I knew what I was up against haha. So I add that into mine.

[@jssaylor]

I never thought of using the wall as a stop block, what a brilliant idea.

[@michaelp9238]

Thanks for sharing your screwups. One of the most valuable things to share.

[@WoodNerds]

Of course man! Thank you for watching!! I appreciate the feedback!

[@JaysonAkersAZ]

Great project, loved the outcome - thanks for sharing the mistakes as well makes us mere mortals feel less flawed :P subbed

[@WoodNerds]

Haha thanks for watching! More screw ups to come!

[@CarlosMorales1983]

Awesome. Thanks for the video. I've been wanting to do this in my garage for some time now.

[@WoodNerds]

You’re welcome! Good luck with your build!

[@donnuse9622]

Just wandering how much storage do you have on the top shelf with the garage door open. Just from looking it looks like it's about half.

[@WoodNerds]

Don Nuse that’s a great observation! It’s honestly not a lot, but I can throw some slimmer items behind and I use the front for things I use fairly often, like a box of rags I can just reach up and pull one out of there. Might be a good spot for large boxes of screws or even clamp some clamps too for quick access.

[@larrd9213]

Thanks for being a normal person who makes hood videos.

[@WoodNerds]

Haha I appreciate the compliment! Thanks for watching and taking time to comment!

[@jadeswormfarm]

Best step by step diy video on the bench build. Thank you

[@WoodNerds]

Anytime! Glad it was helpful! Thanks for watching!

[@jakubadamowicz6662]

Earned a subscribe on this one! Love it!

[@WoodNerds]

Thank you Jakub! I really appreciate it!

[@bretgg44]

Great build man! I'm wanting to make something like this in my garage, as well. This gives me motivation!

[@WoodNerds]

Bret Gregorius thank you! It’s really not a bad project! If you have any sort of building ability you should be able to complete it within a couple days. It took me 5 days (late start Sunday and 4 days after work for a couple hours, all while taking video and planning as I built). If you have help it will be a lot easier.

[@YoooItsRex]

“I’m not sure what kind of abuse this bench is gonna go through, but I wanna make sure it’s supported” -Sounds like good marriage advice.

[@WoodNerds]

Lol! That’s hilarious!

[@LoneWolfRanging]

“Marriage is like a bench ...” lol

[@elguapo1507]

👍 The only people that never make mistakes are the people that never do anything! Nice job dude!

[@WoodNerds]

Thanks man! I appreciate that! Some of my best lessons learned were from mistakes!

[@SoLxReBeLxoRodbi]

Your thumbnail revealed the finish product. So before you mentioned your reason for the hand saw i thought "No way!!!! Is this guy going to Amish Power the whole frame??" Unfortunatelly for me i dont have the space for something like this, Yet. Im just window shoping your youtube video and day dreaming of what could be. Great video none the less. The "How to" directions were to the point. I especially appreciate the inclusion of troubleshooting techniques because from my experience no big box store 2x4 studs/plywood sheets are made equal. A jointer, thickness planer, and space to store them are luxuries i cant afford. Anyway subbed. P.S. Screw the Philips screw!!! I did the same switch and never going back a couple years ago. The contact points from bit to screw head make the star pattern far superior, like galaxies apart!

[@WoodNerds]

Haha You can build anything with hand tools but it’ll take a while! Just figured I’d demonstrate! A circular saw will work pretty well if you don’t have the luxury of a miter saw. Space is something you can’t easily purchase so I completely understand your point haha. Thank you so much for watching and sharing your feedback. I appreciate it!

[@adorkable81]

Dude, how about a wide shot of the final product?

[@brooklyn9588]

Isn't that what the beginning is?

[@yardmine]

Exactly what I was looking for! Great build 👌

[@WoodNerds]

Thank you! Glad it was helpful!

[@spokebloke1]

The 'no split' claim probably comes from the fact that the heads cut their own countersink, as you mentioned. Often, boards split as the head of the screw comes into contact with the surface and pushes it's way into the wood. If these fasteners cut their own countersink, this would avoid that risk.

[@WoodNerds]

Makes total sense!

[@Elzanto]

That is exactly what I wanted to do. I have looked at many videos and they are so complex, I usually can build things as this table and it is helpful. Also the tools that you use and the MISTAKES you made as they are EYE openers for us viewers.

[@WoodNerds]

I’m glad it was helpful Luis! Thank you for letting me know. I’ll be keeping those sections in my videos going forward as it’s valuable to know where the struggles in a project take place.

[@timnash6870]

Tim from Canada… if you live in Canada, you can get those exact same containers at the Home Depot.. two different sizes really cheap… sometimes they are in the flyers even cheaper. Keep your eyes on the flyers. You can get these bins really cheap.all at HOME DEPOTS

[@diycreationsvet4878]

Yeap, thats a great idea man.. i have some stuff that needs to be rearranged. Thanks

[@WoodNerds]

DIY Creations thanks man! glad it was helpful!