Woodturning A Quick Beautiful Project That Sells

Todays project on the lathe is a very quick and simple beginner woodturning project. This video is nearly all done in real time to show just how quickly these can be done. The best part of this project is its an item that makes a perfect impulse buy item or great small gift! The projest starts with a 3x3x10 inch piece of black walnut or your choice of wood. I turn this entire project using 3 basic carbide tools and finish it using Beeswax all natural wood preserver.
#woodturning #wegewoodworks #asmr
#woodbowl #woodlathe #walnut #fcandleholder #impulsbuy #carbidetools #woodturningart #woodturningprojects #woodturningforbeginners #woodshop #woodworking #foodsafe #shoplocal #puremichigan
#wood #woodwork #woodworker #woodcreation #wooddesign #woodart #woodburing #woodcarving #michigan #michiganmade
#hollandmichigan
Email: [e-mail]
Facebook:
/ wegewoodworks
Instagram:
/ wegewoodworks
Finish
hollandbowlmil...
DISCLAIMER
Please note that my channel is for entertainment purposes only. You should NOT rely solely upon the information and techniques discussed and displayed in my channel.
I am not a professional woodworker or woodturner and working with machinery can be dangerous.
It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

[@SeeTheWoodTurn-cf8rv]

I love making these.

[@WegeWoodWorks]

They are a great use of small pieces and a fun little project that sells easily!

[@uniqko]

Thanks for sharing

[@WegeWoodWorks]

Thank you for watching!

[@henrysscrollsawworks6917]

Niiiicccceeelllyyy done ‼️‼️ I thought it was a shot glass at first 😂😂😂😂

[@WegeWoodWorks]

Thanks Larry! It's not one but not much work to make it one 😉

[@DougMilleratWoodSpunRound]

Great job Chase. I wish I had gotten the opportunity to see Rude make these. If I remember correctly, he did these to keep his skew skill honed. You did a very good job with this.

[@WegeWoodWorks]

Thanks Doug! I've been doing a bit of skew practice off camera again recently to bring my skills back into practice.

[@danielmetzler307]

I was able to take a weekend class with Rudy at his home in Berra , ky. In the early 90s. He turned a candlestick for us and said he had made thousands of them in various woods and heights each in about 15 minutes to put his kids through school. I was lucky enough to spot two of his originals in a small shop in Québec city in about 2015. Cost $100. I knew they were old because the wood was ordinary, medium dark with a urethane oil finish and felt on the bottom. His wife put on the felt. It was very early in my wood turning and he was such a kind and gentle teacher. I could not control a gouge so the taught me scrappers, skew and roughing gouge. In the end I had my first very nice finished piece. I still have my notes, the finished piece and now also two candlesticks. Makes me feel good.

[@paintilludrop]

Lutz, FL. Tri County turners. Rudy gave us a live edge goblet. As a beginner, I did not realize what a gift of seeing him in action. Very enjoyable watching him, meeting g his wife. Live in Fl now.

[@WoodworkingTop535]

very nice, thanks for sharing

[@RobinsBuysandDIYs]

Hi Chaseseee!!!!

[@WegeWoodWorks]

Hi Robin!

[@ianholderness5773]

Sometimes the simple jobs can be quit rewarding, and you can finish them really quickly .

[@WegeWoodWorks]

Thank you for watching!

[@ultrawoody1968]

Nice job...i agree its a piece that would sell.....modern and natural...great!

[@WegeWoodWorks]

Thank you very much!

[@EfrénLeón-p3u]

Muchas felicidades por su labor en torneado

[@EfrénLeón-p3u]

Saludos desde México Puebla

[@WegeWoodWorks]

Thank you!

[@lenshandcraftedwoodsigns6033]

looks great

[@WegeWoodWorks]

Thank you!

[@TheMessyStudio]

Looks good, Chase!

[@WegeWoodWorks]

Thanks Billy!

[@lyndaowen2154]

Simple but pretty! I like it. Thank you for sharing.

[@WegeWoodWorks]

Thank you!

[@teckle.turnings]

Very cooooool Chase! 😃

[@WegeWoodWorks]

Thanks Val!

[@pekoorb]

Thanks for doing videos with carbide tools. It's so helpful seeing how you turn, which tools you use, what angles you hold them, etc.

[@WegeWoodWorks]

Glad you like them and thank you for watching!

[@JiggsysShed]

Very nice work Chase. Looks great

[@WegeWoodWorks]

Thanks John!

[@davidfriedman3962]

Very nice, and as a beginner appreciate your teachings. May I ask what brand of carbide tools you are using? Thank you.

[@EckCop]

Looked a bit like pear from the thumbnail, very nice.

[@WegeWoodWorks]

Thanks!

[@RobinsBuysandDIYs]

Hi Chaseeeeee lol

[@WegeWoodWorks]

Hi again Robin!

[@mikedebany2904]

can you tell us the three diameters, distance to middle diameter and overall length please.

[@vinimarshall7301]

Just found your channel you use carbs like i do , nice work mate , ive subd😁👍

[@WegeWoodWorks]

Thank you!

[@trurex007lee7]

Very nice. What is the price tag for that item? I’ve made similar and given the majority as gifts.

[@WegeWoodWorks]

Thank you! The price really all depends on location and how saturated your market is with similar items. For me they do quite qell in a range of sizes from 4in to 8in.

[@DennisDolan-fl3mw]

How do you remove so much wood so quickly?

[@peterww3106]

He speeded up the film!

[@johnhelt5475]

Which brand diamond carbide tool is that? Cuts like butter!