Woodturning an Oak bowl

Wood turning an Oak bowl, from a ultra dry rough turned Oak blank.
My Website
www.bybrandstrup.store
Sponsor:
www.traedrejerbutikken.dk
Hampshire Sheen Gloss Finishing Wax
www.traedrejerbutikken.dk/shop/hamshire-sheen-gloss-2719p.html
Hampshire Sheen Cellulose Sanding Sealer
www.traedrejerbutikken.dk/shop/hampshire-sheen-sanding-2854p.html
Hampshire Sheen Complete products
www.traedrejerbutikken.dk/shop/hampshire-sheen-120c1.html
If you wish to support my channel please follow the link below
paypal.me/SupportTheChannelBra
The videos are for entertainment only. Woodturning is dangerous. Always seek professional advice and training before using the Lathe or any power tools. If you have any uncertainty before performing any woodturning procedure, stop and learn a safer method. Do not attempt any technique simply because you saw it in one of my videos, I might be doing them wrong!

[@deanweeks7956]

Great looking bowl.

[@WOODTURNINGBYBRANDSTRUP]

Hi Dean, thank you very much, and thank you for watching.. Stay safe and have a great day 😀🎄

[@stephendsurowitzormondfinf4490]

Beautiful job!!

[@WOODTURNINGBYBRANDSTRUP]

Thank yoy very much Stephen, i really appreciate the comment .. Have a great day and stay safe 😀🎄

[@richkeelan1312]

Great looking bowl I like the grain great Job

[@WOODTURNINGBYBRANDSTRUP]

Hi Rich, thank you very much, the grain surprised me a bit, but in a good way 😀 thank you for watching .. have a great day and stay safe 😀🎄

[@randellspencer2035]

Awesome bowl, love the wood grain of the oak. Enjoy your videos so I have the notification bell turned on.

[@WOODTURNINGBYBRANDSTRUP]

Hi Randell, Thank you very much for the comment and for turning on the bell, I am very happy about you enjoy my videos.. Have a grat day and stay safe 😀🎄

[@PotgieterWoodturning]

Very nice bowl 😁👍🏼👏

[@WOODTURNINGBYBRANDSTRUP]

Thank you very much, and thank you for spending time to watch my videos .. i really appreciate it .. stay safe and have a great day 😀😀🎄😀🎄

[@EdwinMedinaTornoyArte]

Buen trabajo.. genial su espesor

[@WOODTURNINGBYBRANDSTRUP]

Hello Edwin, thank you vey much for the comment and for watching I really appreciate it .. Have a great day and stay safe 🎄😀😀

[@MOlsen-nf8lk]

Nice work 🤩

[@WOODTURNINGBYBRANDSTRUP]

Thanks :-)

[@TheTinyWorkshop]

Nice large bowl. That s-shaped rest seems useful to me. What do you not like about it? Now you had a good support with the negative rake scraper. Frank.

[@WOODTURNINGBYBRANDSTRUP]

Hi Frank, with the scraper it worked great but with the bowl gouge the outer part seems to get in the way for my hand .. :-) but i will try it out some more .. Thank you for watching, hope all is well stay safe and have a great day .. 😀😀🎄

[@TheTinyWorkshop]

@@WOODTURNINGBYBRANDSTRUP Thanks for your explanation Kim. Then the "Robust interior curved tool rest" would be a better option. (unfortunately it is very expensive 😕)

[@bysonderby]

Hejsa Kim, Flot skål, det er ikke altid let at få en pæn overflade på tørt egetræ, godt arbejde! Mvh Lars

[@WOODTURNINGBYBRANDSTRUP]

Hej Lars, Mange tak skal du have, der er kun nummer 2 ting jeg drejer i Eg så har ikke den store erfaring i det .. men tak for den fine kommentar og fordi du altid kigger med.. rigtig god jul og pas på dig selv .. 😀🎄

[@SAr-Woodturning]

Very nice-looking Oak. Oak can be a difficult wood to turn so well done. Do you use your Laser engraver to draw the logo on the bottom?

[@WOODTURNINGBYBRANDSTRUP]

Hi Sigurdur, It was my second time turning oak and the grain was really nice, so not the last i do.. . about the logo i am using my laser to do that .. thank you for watching stay safe and have a great day 😀🎄

[@emgiwoodworks]

Oak is nice wood for turning but pretty hard. You made it even harder because the bowl is relatively deep. That is the most difficult hollowing while you tend to have more tool overhang. That curved toolrest should have helped you. I was looking into getting one myself but in your opinion a straight rest works just as good??

[@WOODTURNINGBYBRANDSTRUP]

Hi Leo, I have only used the tool rest 2 times so i am going to givet some more tries before voting it out, yes the Oak is very hard and the depth of the bowl look deeper on the movie than it is, it is only 9 cm(3.5 inch) btw the tool rest is the Robert Sorby system the quality is realy good .. if you are buying some at one point .. Thank you for watching .. have a great day Leo and stay safe // regards Kim 😀😀🎄

[@brianbest3777]

Good video. I have same curved toolrest, but rarely use it. Never got used to it!

[@WOODTURNINGBYBRANDSTRUP]

@Brian Best Hi Brian, yes let see i am not convinced yet ! Thank you for watching.. stay safe and have a great day :-)