Рет қаралды 1,332
Last winter, I cored a piece of spalted birch trunk and then set the bowls aside to dry.
In fact, this is the first time I have used my oneway coring system other than a test piece
I recently mounted the bowls back on the lathe and turned them for the second time.
First I turned tenons on the bowls and then I attached the bowls to the chuck with the tenon and turned and finished the bowls.
After I have finished the bowls, I remove them from the chuck and remove the tenons on the lathe.
When I have removed the tenons, I laser engrave my logo in the bottom, and then I finish the bottoms
I finished the bowls with sealer and then sanded them to 600 grit and finally applied a layer of friction polish and buffed them.
The large bowl has a diameter of 39 centimeters and is 16 centimeters high, the second largest has a diameter of 31 centimeters and is 11 centimeters high, the next one has a diameter of 26 centimeters and is 9 centimeters high and the smallest has a diameter of 19 centimeters and is 6 centimeters high.