Woodturning - Slanted Segment Bowl

We hope you enjoy watching this woodturning project as much as we did making it. This piece was challenging but definitely one of our favorites so far...
Links to tools & other favorite products used in our projects below:
California Air Tools 5 gallon Pressure Pot: amzn.to/3WNvmh7
VEVOR 3 Gallon Vacuum Chamber: amzn.to/3Ly22ET
Laguna Lathe Revo 18"/36": amzn.to/4b8gVYM
Starbond Thick CA Glue: amzn.to/4eANFwE
Starbond Thin CA Glue: amzn.to/4caAwca
LaserPecker2 Laser Engraver: amzn.to/3XvgJzL
TiteBond II Premium Wood Glue: amzn.to/3RBqTuR
Mylands Cellulose Sanding Sealer: amzn.to/4be88oh
Large Rubber Bands amzn.to/3zWhF6z
Creality Falcon2 40w Laser Engraver: amzn.to/3yt7hmq
See more of our woodturning & woodworking projects -
/ @exeterwoodworks
Follow us on Instagram -
/ exeterwoodworks
Visit our Etsy Store to see available items -
Exeterwoodwork...
#woodturning #woodturningprojects #segmentedwoodturning #segmented #wood #bowl #maple #blackwalnut #padauk #tangential #turning #howto #maker #woodwork #laserpecker2 #laguna #lathe #titebond
Music from #Uppbeat

[@karenwalker1812]

Wow how have I not found your channel before. This is beautiful. Never seen anything as pretty. I am definitely subscribing to your channel and I look forward to watching your past projects.

[@exeterwoodworks]

We are glad you found us! Thank you so much Karen 🙂 We appreciate your support and kind words, many new projects coming soon

[@manxvibes32]

Amazing work! Love the satin finish on this, I see a lot of people using a high gloss spray and when finished makes the piece look like plastic where as this shows the natural beauty of the wood

[@exeterwoodworks]

Thanks manxvibes32, really appreciate your attention to detail, we really like satin finishes on some pieces too

[@jimg4644]

Fantastic piece!

[@exeterwoodworks]

Many thanks!

[@efransal6098]

Most beautiful bowl i have seen God bless

[@LivingstonBrothersWoodcraft]

Well done, sir. That turned out great.

[@exeterwoodworks]

Thanks so much LivingstonBrothersWoodcraft You should try it out yourself, challenging but rewarding 🙂

[@ThePapa1947]

I guess I saw this before but wanted to comment again. Very nice and successfully done. I just finished another one and also signed it with the Laser Pecker.

[@exeterwoodworks]

That is so nice, we will checkout your new one too. The Laser Pecker2 is our favorite for marking/engraving bowls and larger pieces

[@deeannamorrison8587]

Your bowl is outstanding! The craftsmanship is beautiful. Thank you for sharing the process with us.

[@exeterwoodworks]

Glad you like it, thank you so much we appreciate your support! More projects coming soon

[@scottdavis2964]

Brilliant!

[@PaulSimmons-l4j]

Love your work. Glad Found you.

[@exeterwoodworks]

Thanks, welcome aboard!

[@douglaymac7796]

Very cool! Thanks for sharing your project! 😊

[@exeterwoodworks]

You are so welcome! Thanks for watching

[@renater.540]

Perfect harmony of colours and form. And perfect beauty - I am completely enchanted. Thank you for sharing!

[@exeterwoodworks]

Such a wonderful comment Renate, thank you so much! Always love getting feedback on our projects

[@carlossilveira7007]

Greetings from Brazil. Magnificent piece, I finally found an artist who shows his work in several phases. Most show the assembly of the block, placing it on the lathe and then we only see the final result.

[@exeterwoodworks]

Muito obrigado ☺ We appreciate your feedback and support. It helps us always to improve our videos & projects

[@joepaulsen2572]

Absolutely beautiful. I am going to try and make that. I said try.

[@exeterwoodworks]

Thankyou Joe! You can do it, good luck

[@billrobertsjr9884]

Amazing, the best I’ve seen. Looking forward to the next project…😮

[@exeterwoodworks]

Thank you so much Bill, we appreciate your support!

[@jonbrowning7340]

That is amazingly beautiful! I am going to try my best to steal this idea. That conical wedge in the middle is genius. Awesome piece.

[@exeterwoodworks]

Let us know how it goes if you do, we'd love to see! Thank you so much, goodluck and happy turning 🙂

[@marciobonjovanni4689]

Wow...what a great job.

[@Colleen1947]

So beautiful! Well Done!

[@DennisDolan-fl3mw]

Beautiful bowl

[@exeterwoodworks]

Thank you very much 🙂

[@billtex150]

Thank you

[@SilverBack.]

Excellent work 💯%

[@exeterwoodworks]

Thankyou Douglas!

[@paulsimmons390]

beautiful bowl excellent work one of te very best bowls I have seen, you get an A plus from me.

[@exeterwoodworks]

Thank you very much!

[@latherookie]

That is absolutely magnificant !!!!! Even if that happened!

[@Welagedara]

wow..wonderful creations..✌✌✌

[@exeterwoodworks]

Thank you so much 😊

[@giansala7409]

From Italy : bravo ! Fantastico !

[@exeterwoodworks]

Grazie gian!

[@giansala7409]

@@exeterwoodworks 👍

[@joshdanamax]

Stunning!!!

[@exeterwoodworks]

Thank you!!

[@jecijuli1122]

It's look so nice

[@emiemii7683]

Gerçek sanatçı👍

[@luisrivera4881]

Qué belleza de trabajo, muchas gracias por compartir, saludos desde Perú.

[@exeterwoodworks]

Muchas gracias, me alegro de que hayas disfrutado viendo cómo se hace este proyecto. Todo lo mejor

[@danyafulenwider8530]

Beautiful bowl. What angle did you choose for each piece?

[@exeterwoodworks]

Thankyou Danya, the exact angle depends on the dimensions of the piece you are using. To get two equal wedges cutting from corner to corner our angle was approximately 15deg. Hope this helps!

[@simuakter1487]

🔥🔥❤

[@carolriley8472]

Wow, that is so gorgeous! What angle was the wedge that you used to cut the pieces on the bandsaw?

[@exeterwoodworks]

Hi Caral, the angle we used is approximately 15 degrees. The exact angle will depend on the thickness of the piece(s) you are dividing corner to corner. Practice dialing it in on a few scrap pieces first.

[@dad4932]

Nice bowl. Was wondering. If made a larger cone(diameter) and used cheap wood for cone, would it work still? So you could make peices of hardwood not as big and not need to fill centre of blank as it only gets cut away and wasted. I know you would then need to make a base. But be cheaper on wood.

[@exeterwoodworks]

Interesting idea, i'd say definitely give it a try and let us know how it goes

[@williampeele5700]

How did you add your logo? What type of laser did you use

[@exeterwoodworks]

Hi William, we use the Laser Pecker 2. Very user friendly and easy to use, definitely our favorite engraver

[@kila9288]

I wish the wood turning wasn't skipped

[@exeterwoodworks]

Wait, we skipped the wood turning? 🤦‍♂️

[@kila9288]

@@exeterwoodworks skipped some. I just meant from the very start all the way thro

[@exeterwoodworks]

@@kila9288 no problem, we try to keep most videos from being too long, will keep in mind including more start-to-finish footage in future projects. Thank you for your input! ☺

[@kila9288]

@@exeterwoodworks i totally understand that. Thank you for keeping it in mind. The piece turned out amazing nonetheless

[@petricabistricean1806]

Super tare 🌽🌽🌽🌽🌽🌽🍯🍯

[@stevioclark]

Nice bowl. What do you use the tape measure on the tool rest for?

[@exeterwoodworks]

Thanks Stevio, we use it for smaller projects and marking/centering.

[@brucepigeon3671]

Just a beginner, but paying attention and learning from the great artisans on UT. Beautiful piece, you have done yourself proud.

[@exeterwoodworks]

Thank you for following 🙂 Always keep learning and never give up!

[@billrobertsjr9884]

Beautiful, looking forward to the next project. Five Board .😮

[@398willys]

very creative

[@Claudio10656]

Great artist Congratulations

[@lizdini722]

Very beautiful. You are very talented. Thank You for sharing your process.

[@exeterwoodworks]

Thank you so much! ❤

[@jamescraig5421]

Simple but BEAUTIFUL.👌👌👌

[@crocuscreekwoodworks]

Just found your channel and I really enjoyed this project. It came out beautifully.

[@exeterwoodworks]

Thanks so much! 🙂 Glad you found our channel, we always support fellow woodturners

[@timlewis3583]

Im inspired by this, got the blocks cut and would eyeball the slicesbut id figured I'd ask at what degree are your slices

[@exeterwoodworks]

Hi Tim, Thank you for your gracious comment. We used an angle of approximately 15 degrees. The exact angle may vary a little since it depends on the thickness of your block. Let us know how you finish!

[@timlewis3583]

@@exeterwoodworks will do, appreciate it

[@teresaferia4047]

Eres un artista, muy buen trabajo, muchas felicidades❤

[@solangelopes6113]

Maravilhosa arte !! Parabéns 🎉👏🏻👏🏻👏🏻🇧🇷

[@pascoalfranciscosposito6638]

Hello friend. Congratulations on the job. Fantastic. Hugs to 👪 and friends. Brazil

[@ВладимирЕремеев-с9й]

Very, very nice!!! Beautiful!!!

[@exeterwoodworks]

Thank you very much!

[@marciolima4162]

Parabéns muito bom o trabalho 🙏🙌🫶👍👏🏻👏🏻👏🏻

[@judytulk6535]

Gorgeous!

[@talal919]

Waww

[@ThePapa1947]

Very interesting

[@marycatherinelebouef-op4hf]

Absolutely gorgeous! Very stunning inside and out. Lots of work, yet well worth it! Masterpiece!

[@exeterwoodworks]

Thank you so much! ☺

[@Ameythste]

Wow neat. I did a bowl like that on a very tinier scale when I was in High School.

[@GianbrunoPirona]

Bellissima ciotola

[@exeterwoodworks]

Grazie mille

[@toconnor6811]

Stunning!!!

[@exeterwoodworks]

Thank you!!

[@billtex150]

Very nicely done. I would like to attempt this to bring my turning skills to the next level. Could you please tell me the dimensions of the angled cylinder you used to spreads the wedges. Thanks so much.

[@exeterwoodworks]

Hi Bill, definately give it a try, let us know how it goes. The angled cone is approximately 3" across / 4" tall

[@vanmitchellsr.5735]

To watch a man develop his genius thoughts into a great treasure is truly inspiring! Thank you for sharing with us!

[@exeterwoodworks]

Thank you for your thoughtful comment 😊 Glad you enjoyed this project Van

[@COUNT.BLISS.1234]

exactly, sir.

[@maybethgutierreztablante4267]

Wonderful!!!!

[@exeterwoodworks]

Glad you like it! 🙂

[@oneturnatatime6309]

Beautiful bowl. I also have seen the same technique from Papa 1947. Nicely done 👍

[@exeterwoodworks]

Thankyou so much!

[@nicolasdaprato2369]

wow man this is excellent !!!!!!!

[@AllenOxendine]

Beautiful Piece and interesting process, thanks for sharing. Full View and Like 👍

[@exeterwoodworks]

Glad you enjoyed watching the process Allen, challenging & fun learning a new technique at the same time. We appreciate your support! 🙂

[@holzweg666]

Excellent the bowl, a pleasure the video, not least because of the wonderful music, very well and coherently chosen. When the outer shape of the bowl became recognizable, I felt a little shock, as it obviously took the shape of a piss pot from the hospital. When the whole thing was finished, I could breathe a sigh of relief, because the different colors and also some small revisions to the outer shape, you could change the impression. Now the bowl has a bit of an old school design, were it made of silver or shiny metal it would be an adornment for a small castle or a noble hunting lodge. I like that a lot. Your CV is very exciting to read, it must be fun to live and work in a wood turning family. I would love to see that, but Germany is way too far away. A subscription will keep me up to date on your other projects, so we're still many miles apart, but we're a little closer together in spirit. Everyone take care of yourselves and stay healthy, Schorschi from northern Germany.

[@exeterwoodworks]

Danke, danke! We appreciate your thoughtful comments. Be sure and share them with your other friends and contacts, etc.

[@mbahsir]

Waowwwww amazing👍👍

[@royalmaster203]

a museum piece.....!!!!!

[@jackpons4877]

Awesome.Love the wood choices. What are they?.I have subscribed to your channel looking forward to future projects.

[@exeterwoodworks]

Thanks for the sub Jack 🙂 Walnut, maple & padauk

[@watrgrl2]

Absolutely exquisite work! Definitely worth a barrel of 👍🏻👍🏻👍🏻👍🏻 and subscription to your channel!

[@exeterwoodworks]

Thankyou for your support watrgrl2! We have new projects coming soon

[@fenixxaalin6922]

Good work

[@shyamnayanmishra5446]

Sir, give me one piece Please 🙏 🙏 🙏

[@exeterwoodworks]

🍰

[@alancole6912]

Wonderful work. Happy to subscribe!

[@exeterwoodworks]

Thanks, and welcome aboard! 🙂

[@ramwoods]

Beautiful bowl!

[@RickTurnsWoodturning]

Great work!

[@exeterwoodworks]

Thanks Rick! Glad you enjoyed it.

[@COUNT.BLISS.1234]

sir, beautiful work. i am oohhh sooo soooo jealous. keep it up.

[@exeterwoodworks]

Thank you very much, new project videos coming soon 😊

[@darko6697]

Great work just stumbled across your channel I love woodturning fantastic piece thanks for showing

[@exeterwoodworks]

Thankyou Jason 🙂 Glad you found our channel, we appreciate your support!

[@nepenthe369]

So nice and amazing 😍😍😍💚

[@exeterwoodworks]

Many many thanks ☺

[@lucilenemachadocarlos8970]

Wonderful! From Brazil. Curitiba.

[@exeterwoodworks]

Muito obrigado Lucilene 🙂

[@suen2506]

I am amazed truly beautiful workmanship

[@exeterwoodworks]

Thankyou for your kind words =)

[@shphotography3664]

❤❤

[@kisslooms922]

Beautiful! I love the walnut foot on it too. The shape is stunning of the finished piece.

[@exeterwoodworks]

Thank you so much! Your work looks stunning also ✨🙂

[@LadyKatJPhillips]

Gorgeous piece! I hope you saved the wood shavings for a future project! 🤟😁

[@exeterwoodworks]

Yes! We saved some of the shavings, most looked like confetti 🎉Definitely need to brainstorm on a good project to use them in 🤔

[@edward3021]

Well done, I enjoyed this taste and the beautiful work you did

[@exeterwoodworks]

Thank you so much, glad you enjoyed it!

[@ceddiesmallz]

Absolutely wonderful, thank you for sharing !

[@exeterwoodworks]

Glad you enjoyed it!

[@abrahamben-zeev9142]

creative and beautiful work!!!!

[@exeterwoodworks]

Thank you so much Abraham 😊

[@marcw9229]

Dry night di. Love the details

[@exeterwoodworks]

😊

[@richardthompson7600]

I really like this piece. The colours look amazing 👏

[@exeterwoodworks]

Thank you so much Richard, glad you like it!

[@davidcraft4826]

Wow amazing brother 👌

[@exeterwoodworks]

Thank you so much 🙂

[@cementstatue]

Amazing!

[@exeterwoodworks]

🙂❤

[@michaelgarland1337]

That’s Beautiful 😍 !!!

[@exeterwoodworks]

Thank you Mike! 😊 Be sure to subscribe not to miss our future projects

[@lauradebernard7375]

Un capolavoro. Sono tutti bellissimi i tuoi lavori

[@exeterwoodworks]

Molte grazie per il tuo commento premuroso!

[@Bombardero58]

Siete bravissimi complimenti!!

[@exeterwoodworks]

Mille grazie!

[@mikalaki1]

Beautiful work well done

[@exeterwoodworks]

Thank you so much 🙂

[@orlandomosquera4784]

awesome job

[@exeterwoodworks]

Thankyou Orlando 🙂

[@MarkThompson-ms5wn]

great work

[@exeterwoodworks]

Thank you Mark! ☺

[@gersonpintocardoso790]

Maravilhoso!!!❤❤

[@exeterwoodworks]

Mille grazie! ✨

[@nickifleek5588]

Absolutely beautiful, thank you for sharing!❤️❤️❤️❤️

[@exeterwoodworks]

We appreciate your support, Thank you! 👍

[@bpark10001]

Did you do anything to clean up the bandsaw cuts before gluing them together?

[@exeterwoodworks]

Yes, we lightly sanded each side that had a bandsaw cut to ensure tight glue joints. Decided not to include footage of sanding each piece to keep the video moving and not too long!

[@kenkemnitz8213]

Would have been nice to see the roughing cut on the O.D.

[@exeterwoodworks]

We try to include every aspect of the turning project in a reasonable amount of time without making the video too long 🙂 Thank you for your input.

[@vdsmade]

Great idea 👷👍

[@exeterwoodworks]

Glad you like it!

[@cathedralImages]

Great work ..what's the spray at the end ?

[@exeterwoodworks]

The spray finish we used was lacquer

[@Dirkthrustxxx]

Absolutely stunning piece!! Love the contrast! Gonna give this a try myself 👍

[@exeterwoodworks]

That is awesome, when you do let us know how it comes out! Would love to see