Woodturning - The Red Oak Vase Part 1

[@richardreynolds8919]

I love your channel me and my wife have watched everyone of your videos to the end. Just a lesson I learned about wearing gloves. I was a machinist for a long time. As well as wood turning. I have seen 3 people loose arms because of gloves. The gloves get even slightly grabbed can suck your hands into the tooling and cause severe injuries. I machined wood, steel, carbon, graphite, both mill and lathe. It is a matter of personal choice. But that choose can be costly. I like to make sure everyone knows what can happen. Thank you for sharing. Designer epoxy.

[@SpragueWoodturning]

Metal lathes are unforgiving and I bet most of the really nasty injuries are on it. It can happen with a big powerful wood lathe too, but in my case, my lathe would stall as it’s on belts like most wood lathes. Gear to gear lathes are powerful! Thanks for the warnings!

[@alanneel2749]

My granddaughter says to keep the purple resin top and Grumpa agrees!! Just love that Designer Epoxy

[@SpragueWoodturning]

Love it!! Thanks!

[@johntolly1013]

Resin on the top. Yes, red oak would benefit from being stabilized before casting. Designer Epoxy. Great project Jim.

[@SpragueWoodturning]

Thanks John!

[@Rammy72Moni]

This colour is just stunning with the oak! I would sag, keep the resin. I will look part two next; whatever you do will be awesome, I know it!

[@SpragueWoodturning]

Thank you so much!

[@JaneyBug]

This is so very cool with the direction of the limbs. And, the purple is AWESOME!! I would have voted for to keep the resin. But, it will be beautiful either way you choose.

[@SpragueWoodturning]

Thanks for voting

[@The360xyz]

Seriously wish I would have discovered your channel years back. My son and I could have watched with my father in Joshua Tree before he had passed. He also was a wood worker. Awesome work and creativity!

[@SpragueWoodturning]

Welcome aboard! Thanks for watching!

[@epopddot]

Jim, I really appreciate your professionalism, work ethic, ingenuity and talent. Side note, I would leave the resin on top. TURN ON!

[@SpragueWoodturning]

Thank you very much!

[@shawndavis7862]

I love when you leave the unexpected challenges in your videos. There is so much more to your craft than slapping things together. I think it really shows the mastery of tool and materials to make your art.

[@SpragueWoodturning]

Thank you so much!

[@valeriefuqua4641]

@@SpragueWoodturning Audience participation is very important to getting people's interest and keeping it! You also did a great job introducing that aspect at the beginning of the video. Idk if you've ever heard of Toastmasters International, but they teach that as a great way to maintain audience interest!

[@HARRIETTWWILLIAMS]

I LOVE your videos!! I vote for resin. That deep purple is an amazing color!!

[@SpragueWoodturning]

Thanks for voting

[@siph2o]

I'm looking forward to seeing this done! My vote is to keep the resin,

[@SpragueWoodturning]

Thanks

[@marilynhohnstein8477]

My vote is resin on such a beautiful color of resin. Beautiful as always.

[@SpragueWoodturning]

Thanks for voting

[@theangrywoodturner9972]

No epoxy designer epoxy ...with every piece we learn something new!!

[@SpragueWoodturning]

Thanks!

[@dragonfarm2texas518]

Can't wait for the 2nd part to see how this vase turns out. My favorite color...Thanks for the videos.

[@SpragueWoodturning]

Thanks so much 😊

[@thomaskeane5723]

Can't go wrong with purple! This is going to turn out beautiful.

[@SpragueWoodturning]

Thank you very much

[@mikemoore4443]

Jim - I’ve had similar problems with entrapped air when I pour the resin on top of a branch inlay and then count on the air bubbles working their way out through the layer of epoxy. I’ve pretty much eliminated this problem by using a pipette (mini turkey baster) to squeeze the epoxy in at the bottom of the piece through one of the gaps between the branches. This effectively pushes the air out as the resin is squeezed in at the bottom. This also works well to fill deep holes like one you stuck your screwdriver into.

[@SpragueWoodturning]

Thanks!

[@apismellifera1000]

Filling a hollow log with resin and branches makes for a super cool piece.

[@SpragueWoodturning]

Yes it does! Thanks for watching

[@mindcraftyD13]

Love the color of the resin. I say have the resin on the top, you can take it off later if you end up not liking it. My vote, resin top.

[@SpragueWoodturning]

Thanks for voting

[@marycatherinelebouef-op4hf]

To begin with a piece of wood that looked like that compared to what you created in the end is a miracle! Awesome work, you made another masterpiece! So cool!!

[@SpragueWoodturning]

Thank you very much!

[@marybethhuson295]

You can always try the lesser and see how it goes and if all else fails than go down to the wood. What ever you do I’m sure it will be wonderful. It’s always a pleasure to watch you turning and see what art you come up with.

[@SpragueWoodturning]

Thanks 😊

[@dzielinski6560]

Love the foreshadowing ... "Nope" "ha, ha" ... Learning and laughing is a good combo

[@SpragueWoodturning]

Always, thanks!

[@geoffrobinson5584]

Watching that epoxy shine in your last segment, I will vote to keep it. Love your videos, keep up the good work!

[@SpragueWoodturning]

Thank you!

[@phillipblindenbach6978]

Gorgeous wood…love the red oak! The purple resin is stunning too! I really like how the resin highlights the cracks in the branches.

[@SpragueWoodturning]

Thanks so much!

[@artbowden1096]

Resin. I agree with what many others have said. Try to keep the resin and if it doesn’t work out or meet your expectations take it on down to the wood. I trust your skill and artistry to produce something beautiful whatever you choose.😊

[@SpragueWoodturning]

Thanks

[@pamcook4607]

Designer Epoxy. I would love to see some resin on top.. it is unique piece and shape, so don’t think uniformity is needed. Uniqueness wins the turn !

[@SpragueWoodturning]

Noted, thanks for watching!

[@johnlavarine8155]

Jim, if the curves were more balanced, I would definitely say resin, but with on wing dipping farther down, I would have to say go for a wood rim. The great thing about this conundrum is that you can take it slowly and see how it evolves as you are taking it down. You may be surprised with the results.

[@SpragueWoodturning]

Thanks!

[@leisongivangomo4478]

I agree with John!

[@Kuro_Tsuki]

Agreed.

[@joallawestervelt6918]

I don't know where I am time wise as I am still trying to recover from being really sick with covid. Nearly died, couldn't talk spent more than a month in an adult facility. Mom and I both have been cleared of covid and are home. She did not have it like I did fortunately. My brain seems to still be healing. A little better each day. Ugly disease. It is why I have been absent for so long.. But for what it is worth, I agree with jim. Beautiful so far.

[@greenmanjnj]

@@joallawestervelt6918 I hope you are doing better!! Sounds like you really got tossed around. Best wishes for a full recovery!

[@skipflorey2511]

Jim, I’d say no resin. The design inside the cross branches look pretty cool as well. I’m glad the “Designer Epoxy” didn’t crack👍

[@SpragueWoodturning]

Thank you very much

[@2aarms129]

My 2 cents would be resin on top. Really liking the color tho personally I am a fan of much darker purple. Neat idea adding the black pearl to darken it up.

[@SpragueWoodturning]

Thanks

[@smallnepal8604]

Love that color. Leave as much of it as you can.

[@SpragueWoodturning]

Thanks

[@ceciwolfcat7]

So far it's stunning, and part of that is that resin! I think it should stay, and since you're a pro, you know when and what adjustments to make if it gives you any trouble. I can't wait to see the end result!💜

[@SpragueWoodturning]

Thank you so much!

[@cmh2496]

Designer epoxy Yes to the resin....

[@SpragueWoodturning]

Got it! Thanks

[@rogerjohnston9545]

Resin, after all we are members of the “ resin leaks are us.” club. 😎

[@SpragueWoodturning]

Yes we are! Thanks

[@donnagreen7386]

Oh my!!! I’m very partial to deep purple - band and colour!!! I absolutely love this and can’t wait to see what you do with it so I’m off to watch part 2 now. I’m sure this was snapped up but this is exactly the sort of piece I’d buy in a heartbeat! 💜💜💜

[@SpragueWoodturning]

Yes, it sold right away. Thanks for watching

[@donnagreen7386]

@@SpragueWoodturning I’m really not surprised! I’d love one of your pieces they are stunning!

[@willem1098]

Looks great, cant wait for part 2.

[@SpragueWoodturning]

Thank you very much!

[@Josh-yb1gg]

Absolutely love your work, and the format of your channel Jim. Personally I've just got too much OCD for the resin rim.... if it were me, and I already knew I was grinding anyway, I'd just take I down to the wood. It keeps the piece primarily about the wood, and the resin as an extraordinary accent... it conceals the fact that it was a casting too, leaves you wondering if it were just an epic inlay. But I differ to the judgement of the master!

[@SpragueWoodturning]

Thank you very much

[@hazmania]

I think resin! It doesn’t matter that it’ll be thinner on one side than the other, that’ll be part of this bowls charm. The fact that the rim will be all purple will “tie it all together”. It’s going to be a beauty! 🙂🌸

[@SpragueWoodturning]

I can’t leave it uneven, lol. Thanks

[@shameonyou4344]

@@SpragueWoodturning okay, but what counts as 'uneven', tho? if you take it down to the wood, won't the two sides be different heights from the base?

[@landarogers9926]

I like resin if possible and the odd shape top. I am not a turner, but an admirer. Love the colors

[@SpragueWoodturning]

Thank you so much!

[@lynettesloan2070]

Love your work, Jim! I think the unevenness of the epoxy rim could add more charm to an already lovely piece. I say leave it. If you absolutely HATE the look then take it back to the wood. Also if you can leave the top of the vase with the current profile, I think that would look amazing. Regardless of what any of us say, the piece will be just as terrific as you always produce! Have a blessed week!!!

[@SpragueWoodturning]

Thank you very much!

[@jameshodgins1937]

Can't wait to see what you do. I like the curvy top.

[@SpragueWoodturning]

Thank you very much

[@SAOS451316]

It's looking great so far! I think it's worth a try to keep the resin on top; you can always remove it if it doesn't work out.

[@SpragueWoodturning]

Thank you very much!

[@sanditrueman9350]

Another very interesting project. I like the side reveal of the branches. My vote is to take it down to wood then do your magic by adding a purple rim to top it off.

[@SpragueWoodturning]

Thanks for voting

[@wendylord1284]

I love this one also, leaving the resin would be beautiful. All the work you go through for the finished projects are extremely helpful, for me. I want to move toward turning, and using resins. The Designer Resin you use, has so many opportunity in art. Seeing it in action brings visions of possibilities.

[@SpragueWoodturning]

Go for it! Thanks for watching

[@lindabrown2211]

Jim I Love it. I see your point wood on top..... so Wood it is. Thanks for sharing. Be well

[@SpragueWoodturning]

Thanks 👍

[@brucewatt2864]

Looking good Jim. can't wait to see it finished. my finger cringed when you described the bandsaw blade lol. with your track record are you sure you didnt spend a couple of hours off camera getting it out of the bucket then put it back in for the camera lol. loved the instruction when you were using the band saw to get rid of the wings. I was waiting for "this is the safe way to do it Bruce" no resin on top is my vote.

[@SpragueWoodturning]

She slid out like it drank a bucket of mineral oil, haha. Thanks

[@blademon6]

Resin In my mind would be the best.

[@SpragueWoodturning]

Thanks

[@carlacoxtn]

I'm so glad you are using epoxy more and would love to win the Designer Epoxy to use in my own projects. Also, purple is my favorite color!

[@SpragueWoodturning]

Thank you very much

[@michelledavis7333]

Another beautiful piece, anyway it turns out it will be awesome. my vote is to make the resin even, if it doesn't look right or doesn't work out you can always go down to the wood. I think it will turn out great no matter what way you do it.

[@SpragueWoodturning]

Thank you! Cheers!

[@DougMilleratWoodSpunRound]

This piece is looking good at this point. As for the top, leave it as is. Designer Epoxy

[@SpragueWoodturning]

Thanks Doug!

[@siouxmouland5948]

This is gonna be spectacular! Love the color and the funky wood. I think a wood edge rim would be better but either will be fine.

[@SpragueWoodturning]

Thanks 👍

[@dalemaclaren7576]

Resign at the top Jim. So looking forward to seeing you finish this piece. Looking beautiful so far.

[@SpragueWoodturning]

Many thanks

[@jerrylindberg5583]

Crazy project Jim, amazing what you come up with. My thought is to try the resin top first and if you don't like it then continue onto the wood. You're the artist and you have to be happy with the project, so it's still your call. Looking forward to seeing the final piece. Good liuck.

[@SpragueWoodturning]

Thanks 👍

[@AmbrosiaR]

Oh man, I can't wait to see how this turns out! The anticipation! I think you should take the resin down to the wood.

[@SpragueWoodturning]

Thanks

[@roncooney8526]

I am leaning towards no epoxy on the rim, though I will be interested to see how you plan to do that. I’m sure 8t will be great no matter what you do.

[@SpragueWoodturning]

Thanks

[@lesleythompson810]

I really don't mind, I think it will be beautiful whichever way. Best wishes from the UK 🇬🇧

[@SpragueWoodturning]

Thank you very much!

[@kevindurica6092]

Great video and very interactive. I would try to achieve a resin top and it it doesnt turn out then go for the wood finish. Either way both are going to offer a unique look when its finished. I love the plum colour. With a mica or glitter inside might mimic the plum crazy dodge use to paint their cars with lol

[@SpragueWoodturning]

That’s exactly the color I was going for. Thanks!

[@ellengraham4677]

What a stunning colour,I would live to see the resin top but I'm not sure if will work ( given your luck with this piece ). I believe it's going to be lovely which ever. Well break a leg and I'll say a prayer. Take care stay safe & warm.😘😘🙏🙏

[@SpragueWoodturning]

Thank you very much

[@Digger927]

I'd leave the resin and finish it as it sits. It's easier and I like the idea of the asymmetry on this one.

[@SpragueWoodturning]

Thanks

[@DeeSpriggs]

I like the idea of the resin framing the top myself.

[@SpragueWoodturning]

Thanks

[@lmcintire-brooks475]

this looks like one of the most ambitious projects I've seen you do since I started watching. Good luck. However you finish it, I know it will be gorgeous.

[@SpragueWoodturning]

Thank you very much

[@rebahensley5323]

I like it the way it it. I'm sure whatever you do will be great. I've liked everything you've designed. So my vote is resin I suppose. The vase is very MCM, I think.

[@SpragueWoodturning]

Had to look that one up, lol. Thanks for watching

[@rebahensley5323]

@@SpragueWoodturning lol.

[@leisongivangomo4478]

I think take it down to the black so it balances out with the center! Awesome colour by the way!

[@SpragueWoodturning]

Thanks 😊

[@mjp7281]

That is turning out great! A thin line of epoxy would look good. Designer Epoxy

[@SpragueWoodturning]

Thanks

[@bwrightaway2877]

I think the resin could add a nice look to it. If it turns out looking bad you can remove the resin but if you remove it 1st we'll never know.

[@SpragueWoodturning]

Agreed, thanks!

[@carlacooper4111]

Make a lid. I love that purple! But whatever is chosen I’m sure it will be beautiful.

[@SpragueWoodturning]

Thanks 😊

[@fridgewhisperer]

No resin seems the way to go but either way will be great. The light is going to shine through the middle and look so cool. Can't wait!

[@SpragueWoodturning]

Thanks 👍

[@johnconnor926]

Designer Epoxy. I think it would look great with the live edge. But I am sure no matter what you do it will look beautiful.

[@SpragueWoodturning]

Thank you very much

[@wrinklesandsprinkles]

I’m not a turner, but I say no resin.😊

[@SpragueWoodturning]

Thanks

[@abayifo]

I would say like some others, to try and keep a little epoxy on top! Besides purple is my favorite color! I can't wait for part 2!

[@SpragueWoodturning]

Awesome! Thank you!

[@timemmel5129]

Designer epoxy. I love your work and have learned a lot from you. Thank you very much

[@SpragueWoodturning]

Thanks for watching

[@janeoverby2151]

Awesome project so far, Gary,Papa 1942 uses denatured alcohol on the hot melt glue, letting it sit on there for a few minutes, then it peels right off. I have tried this too it works really well. Maybe try that when you have a repair job to do on holes too big for UV resin. As far as rhe rim goes I love the epoxy, but I agree with you it would be a real challenge to get it even. The dark rim would look great too.

[@SpragueWoodturning]

Thanks Jane!

[@conniehenry6878]

Hi Jim. Love your channel. Reminds me of being in the shop watching my dad tinkering. He explained everything he was doing so I learned a lot automotive, electrical, plumbing etc. My vote No resin.

[@SpragueWoodturning]

Thanks!

[@traceyrice]

I really like the idea of the resin on the top. But it's like you said, if it doesn't work, then you can just go down to the wood. I can't wait to see it, either way! 💜 And I know what it's like with the not enough coffee. I can't have any until the rest of this heals up. The doctor said that pulling all caffeine would help it not itch as bad and he was right. 🤯

[@SpragueWoodturning]

Got to have my coffee, lol. Thanks 😊

[@imwhisper]

Robert and I vote for no resin on the top. This is turning out cool looking. Sorry you are having to chase those dang holes!

[@SpragueWoodturning]

Thanks for watching

[@murtgman]

Another great idea for a video. I'm unsure as to the top I think go with your gut and see what happens. Either way I'm looking forward to part two to see how it turns out.

[@SpragueWoodturning]

Thank you very much

[@gmmpiper]

This is Awsome work, I have really enjoyed the channel, keep being you. I think you should go without resign. From what I can tell, the Designer Epoxy is great stuff, but you are right, the blending of wood will make this piece.

[@SpragueWoodturning]

Thank you very much!

[@alangibb3100]

Jim, im sure it will turn out fantastic whatever you decide mate. Your hot melt glue if u put denatured alcohol on it and leave for a wee while it just peals of allowing you to use your Hunters tool which by the way is fantastic I have one on your recommendation works great.

[@SpragueWoodturning]

Thank you very much!

[@jenniferlewis9864]

I love the look of this one so far. One of my favorites. I think either will look great

[@SpragueWoodturning]

Yay! Thank you!

[@kestraavalon]

Late to show, no resin… now off to part 2 to see the outcome. I love the weirdness and the wicked royal purple color of this project!

[@SpragueWoodturning]

Thanks so much!

[@anitawilhelm5517]

Wow i like that purple

[@SpragueWoodturning]

Thanks

[@hantieferreira4398]

Obviously, purple is the best color! Love the piece!

[@SpragueWoodturning]

Thanks 😊

[@mgj7623]

I would love to see it down to the wood, so no resin. I love the beading at the base and it was fascinating watching the slow motion close up. Designer Epoxy.

[@SpragueWoodturning]

Awesome, thank you!

[@scottwebster8104]

Looking good Jim. A nice, different project. In my humble opinion, I think you should take it down to the wood. Can't wait to see the end result. 👍

[@SpragueWoodturning]

Thanks 👍

[@monikehawkes-frost6923]

Hey Jim thank you for the tip about your band saw I just bought a rikon 12" re-saw band saw had a horrible time figuring out what sort of blade to use after your tip I went to the website that you provided and try to order one but I didn't know what width I should get, so I told the lady that I want the same one that you get. She looked it up and voila, I have ordered the blade that you use. Thank you so much that was very very helpful

[@SpragueWoodturning]

Glad I could help! I always get 1/2”. Thanks!

[@BlondiNativeAme3]

Just love crystal purple 🥰🥰🥰 20:56 I save plastic containers like this and margarine tubs (I cut cut down) for plant saucers when I bring in my outdoor flowering plants for the winter.

[@SpragueWoodturning]

Thank you very much!

[@markverhagen1663]

Hi Jim, I think removing the resin from the rim would look better. Something I learnt from Gary on his KZbin channel "ThePapa1947" is that you can remove hot melt glue by dabbing it with denatured alcohol and leaving it for 5 to 10 minutes. The alcohol gets under the glue and it peels away easily. Thanks for another great video.

[@SpragueWoodturning]

Yes, thanks!

[@janetreiche9836]

Enjoyed seeing your creativity and can't wait until I see the finished project next week.

[@SpragueWoodturning]

Thanks so much!

[@daletprescott5199]

I like the curves. Do the best you can with what work for you. This is going to one boss bowl.

[@SpragueWoodturning]

Thanks 👍

[@stephanieparker1250]

I’m loving the idea of doing projects in two part videos. Gives more time to go over details, and I love that we get to be involved in some of the final design! 🎉🎉🎉🎉🎉

[@SpragueWoodturning]

Awesome! Thank you!

[@krisdoyle3031]

I'm torn but think go down to the wood.👍👍 Designer Epoxy

[@SpragueWoodturning]

Thanks

[@LoisHubbard]

I really like the two-parters I've seen so far and I love the fact that you've taken the opportunity to ask your audience. Reading all of the opinions is great but I'm not a patient girl so I'm glad I get to watch the result straight away!

[@SpragueWoodturning]

Thanks so much!

[@mauman97]

Love that type of turning. I would say leave resin at the top.

[@SpragueWoodturning]

Thanks

[@alanleach6760]

You really inspire me and I learn so much from watching your videos! I just purchased 6 gallons of Designer Epoxy. I have lots of cut offs and specialty wood pieces to use and am looking forward to using some of your techniques on them. Thank you so much!!!

[@SpragueWoodturning]

Hope you used my code! Thanks for watching!

[@CandiceGoddard]

I think the uneven asymmetrical top with the resin looks nice.

[@SpragueWoodturning]

Thank you very much!

[@johndalphondjr3663]

Love your channel, you gave me the last little push I needed to dive into wood turning I have just purchased my first wood lathe. Now the fun begins.

[@SpragueWoodturning]

That is awesome! Thanks for watching

[@canadan350]

Have been a big fan of the branch inlays since I first saw you use them with soapstone. This is a unique take on it. I'd like to see the epoxy rim; if you don't like it, you can always turn it away.

[@SpragueWoodturning]

Thanks, will do!

[@mookinbabysealfurmittens]

I agree with everything OP said!

[@bettysack1257]

Always love your work Jim! It is a joy to watch you wood turn. My husband and I love watching. :) We are from Saskatchewan! I think going to the wood would be nice on this piece. My husband said he is happy either way with it. Truly I am too.

[@SpragueWoodturning]

That is awesome! Thanks

[@connorhalliday7304]

Whilst I'm mainly here to chill out and watch a cool thing come into existence i wholly appreciate the metric subtitles

[@SpragueWoodturning]

Thanks!

[@randallwilkie4658]

I’m torn between the two options Jim. As others have suggested, go for the resin rim and see how it looks. Can then go for wood if the resin doesn’t suit. Designer Epoxy.

[@SpragueWoodturning]

It’s a tossup. Thanks

[@mikem1087]

I like the resin rim I think it will look good matching the resin the sides

[@SpragueWoodturning]

Thanks

[@PNWCagey-Dub]

This definitely calls for a few beers🍻 then decide.

[@SpragueWoodturning]

The whisky spoke to me last night, haha. Thanks

[@PNWCagey-Dub]

@@SpragueWoodturning 😂😂 It never lies! Can't wait to see what it says next week. 🥃🥃🍻

[@jimwroblewski6592]

Jim, expose the beauty of the wood. Grind the resin off the top. That Designer Epoxy is impressive!

[@SpragueWoodturning]

Thank you very much!