Floating Bowl

[@billmarker2708]

Looks good been watching u for a few years

[@Butlerfamilyfarm2005]

that is different for sure! thanks for all the ideas you have giving me.

[@loucinci3922]

Interesting idea. Thanks for sharing

[@JiggsysShed]

That is cool Tim!

[@bgpappy30]

Thank you sir for sharing.

[@cmac1100]

As long as you don't try to eat soup out of it, I think you'll be fine! Lol looks cool!

[@LewisKauffman]

Well that's really cool!!!

[@jorgelamas1370]

is this the end? No second part?

[@chaselee86]

You should put some big magnets in the middle of each piece and they will be truly floating, without the need of any supports.

[@johnnyb95678]

Always enjoy watching you turn and some of the crazy stuff you come up with.

[@andrewhorowitz2630]

What tape is that?

[@sailingeric]

Put a light in it and it would be an amazing lamp

[@glencrandall7051]

Tim, you can be really weird at times. Please don't get me wrong, I like it. But lets face it, weird is weird. And that turning is weird. But good stuff or weird stuff you are loved ❤and I never miss one of your videos. Thank you for sharing. Have a great day and stay safe.😄😄

[@rp8564]

Stay weird, Tim 🤭

[@Appellonia]

I'd take weird over anything. Anytime. I am one of these weird people and have been reminded of this fact my entire life. Do you know what my response to this constant life long observance...also...my entire life? . THANK YOU

[@lenshandcraftedwoodsigns6033]

Absolutely cool, I never know what you are going to try.

[@randypenney6413]

You may not have intended, but I looked at those bark-on rounds and thought to myself, hey these give me some great inspiration for resin-filled turning accents with the bark-on outside left intact 😃😃

[@kdalwayslive305]

I enjoy watching your videos❤️

[@garthkeck2003]

Im assuming thats not for holding liquids. Thanks for sharing

[@bradwiebelhaus7065]

Looks good, always a good video from you.

[@alextopfer1068]

Interesting. You could do something like this and combine it with some hand forged supports to make a vase

[@Appellonia]

Hey Tim! I had an 💡! If you took a super small drill bit and only made holes through the 2nd and 3rd layers (sections?) big enough to pass a doll making needle and two strands of fishing line through at the same time through, (these come 3 to 7 inches long and super duper skinny) then cut two pieces of fishing line. One length equal to the length of the bottom surface of your top piece to the distance of where you would want the bottom surface of the 2nd piece to stop plus one inch, and another piece equal to the length from the bottom of the 2nd section to where you want the bottom of the third piece to end plus one inch. Then with a staple gun, take the first piece of fishing line and around a half inch from the end of the line staple a it to the bottom of the top section. Take the other end and thread it through the doll needle and pass it through the hole in the 2nd section. Take off needle and staple the line a half inch from the end to the bottom of the 2nd piece. The your 2nd piece of fishing line, measure a half inch from the lines end then staple on that spot on the bottom of the 2nd layer and pass through The holes in the 3rd layer using the dolls needle.. Remove the needle make sure you're half inch from the end And staple where to be farm of the bowl. This would make it so you don't have to drill as many holes and the illusion I really stand out even more if you can't see anything hold me up if you don't. Want to make the bottom on level to where it possibly could rock 2nd 4th you could always. Create a recess somehow on the bottom 3rd piece that the staples would go into so it could be but then you have to Add that depth of the recess To the length of that last piece of fishing line, although i'm sure it wouldn't be very much. Anyway just thought I'd share....hell this might be a stupid idea. But then again, who knows, it might be as cool as I see it in my head. But I figured ii couldnt do any harm to tell you, so if you or anybody else though it would look cool and wanted to try it they could. Plud, I really want to know if it works. 🤣 So, if anybody does try it and it does, LOL...let me know. As always, love your channel Tim and all your projects. Keep them coming. You're my favorite creator on here with the coolest creations!✌️&❤️!

[@williamellis8993]

Looks great, Tim. I'm still (after all these years) trying to figure out if you're a genius or just plain crazy (lol). Bill

[@michaelmcdermott2178]

Couldn't he be both?

[@MichaelEdelman1954]

Maybe epoxy some brass rod instead of just the wire, and give it a nice stain (or stains) to put some color in that basswood..?

[@woodturningwithtimyoder]

I had copper, brass and dowel rods ready to use but I misplaced my tenon markers so I went with the wire. If I was off a bit on drilling the holes for the rods or dowels we would have been in trouble 😅I can't wait to really try some different mounting methods and different wood on the next one.

[@harveypflugerh5901]

Code and free shipping still not working

[@boazjoe1]

Turn whatever floats your bowl.

[@Leefywood]

Tried your coupon code and free shipping but neither worked.

[@robusttools9505]

Please try again !

[@blumax413]

Hey Tim this is really one of your weird ones😵‍💫😁.. hey when do you think you will get to the video we talked about at SWAT LAST YEAR? Really want to see your take on it …And I will see you there again this year. BVWT is actually hosting a room this year. A club dropped out so we took their place. Talk to you soon… Rick.

[@garcj108]

Have you ever been told that you look and sound a lot like Matt Malloy (now on Daily Alaska on ABC) or are you Matt Malloy acting as a woodturner?! ;-) :-p

[@stephensurowitz331]

Tim neat job! But, think about what you are teaching woodturners by not using a face mask and eye protection!

[@trekmaster30]

first

[@stevenmason1674]

Wow! what a hero!

[@charleyball7260]

Be interesting if it wasn't for all the ha ha ha ha ha's.

[@mikeknowlden9617]

"COOL BEANS"? when did some southern man in OKLAHOMA learn northern slang! I may have to unsub from you just for that lol.