Woodworking: Steady Rest version 2.0

After using the original version of this steady rest, there were a few things that I needed to change. It is much improved now and I've updated the plans too. You can find them on my website.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
I have both the plans and steady rest for sale on my website!
Plans: www.wolfridgew...
Steady Rest: www.wolfridgew...
Isaiah 53:4-5 (NIV)
Surely he took up our pain and bore our suffering, yet we considered him punished by God, stricken by him, and afflicted. But he was pierced for our transgressions, he was crushed for our iniquities; the punishment that brought us peace was on him, and by his wounds we are healed.
Ack's Abrasive & Polishing Paste
ackswoodpaste....
Use WOLF10 at checkout to get 10% off your order
Starbond
www.starbond.c...
Use WOLF10 at checkout to get 10% off your order
Materials used (affiliate):
1/4" Up Cut CNC bit: amzn.to/2QZc3Cd
70mm 82a Roller Blade wheels: amzn.to/3C2L3oi
Powertec 5 Star Thru Knob 1/4-20: amzn.to/2QZUFgP
1/4-20 x 3" Carriage Bolt: amzn.to/3bYLhBs
1/4-20 x 2.5" Carriage Bolt: amzn.to/3bYLhBs
18-8 Hex Drive Flat Head Screw: www.mcmaster.c...
3/8"-16 x 3" Bolt: amzn.to/2SC4Qs5
Titebond III: amzn.to/3bZirAB
Tools I use (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Ridgid Table Saw: amzn.to/3jnEJhj
Rikon 14" Bandsaw: bit.ly/3naOamE
Ridgid Oscillating Sander: amzn.to/37kfOqe
Jet 1836 Drum Sander: bit.ly/2KZRMcI
Jet Air Filter: amzn.to/33mCYLz
Makita 4" Angle Grinder: amzn.to/3gO9aih
Shop Fox Dust Collector: amzn.to/33m1Raf
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Hollowing Combo Set: amzn.to/2UM67vT
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools Ci2-R2 Square Radius Negative Rake Carbide Cutter: amzn.to/374GutW
Easy Wood Tools Ci3-NR Round Negative Rake Carbide Cutter: amzn.to/3drcz3b
1/2" Bowl Gouge: amzn.to/2XV8jQc
3/8" Bowl Gouge: amzn.to/37Lz5is
3/8" Spindle Gouge: amzn.to/3lP87hd
1" Standard Skew Chisel: amzn.to/2XoYbz0
1" Round Nose Scraper: amzn.to/2FwLPBh
1/8" HSS Parting Tool: bit.ly/2GAEBey
1/2" Square Scraper: amzn.to/2pjpL53
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
60 Degree Live Center: amzn.to/2DRGRLd
DMT Folding Diamond Fine File: amzn.to/3jEEZsT
SUBSCRIBE: / wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: www.wolfridgewo...
Instagram: / wolfridgewoodworking
Etsy: www.etsy.com/s...
Email: [e-mail]
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142

[@spindlesworkshop9744]

great update!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@markfishburn8284]

Thank you for sharing your video. I need to build one for my lathe. This is prompting me to build the one I need. Thank you

[@WolfRidgeWoodworking]

Thank you Mark! Hope you make it and create some amazing projects with it. - Ed

[@GordonRock1]

Excellent job, Ed!! 👍👍👍

[@WolfRidgeWoodworking]

Thank you Gord! I hope you are well. - Ed

[@GordonRock1]

Thank you, Ed. Getting a little better every day. I am hoping to get back into the shop in the next day or two. Take care of yourself!

[@cortlandhunt4721]

Good job Ed!👍🇺🇸

[@WolfRidgeWoodworking]

Thank you! - Ed

[@donaldtrabeaux5235]

Awesome great job ED

[@WolfRidgeWoodworking]

Thank you very much Donald! - Ed

[@WoodenItBeNice]

Great updated steady rest Ed. Take care. Cheers, Huw

[@WolfRidgeWoodworking]

Thank you Huw! - Ed

[@daveb.misc.2589]

Nice upgrade Ed. Well done!

[@WolfRidgeWoodworking]

Thank you Dave! - Ed

[@philhorakjr1652]

Thanks, I also have a JET 1221, can't wait to build one...I have access to a CNC.

[@WolfRidgeWoodworking]

That's great Phil! - Ed

[@dtork47]

Really nice design!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@woodturningartbyhabeebasad1020]

Nice upgrade ED 👍🏽 I still have to make mine but no CNC yet LOL

[@WolfRidgeWoodworking]

Thank you! The plans are vastly improved too if you want to pick them up and use them to make your own without the CNC. - Ed

[@MorningwoodTurning]

Good video. Thanks!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@blocke2976]

I really like your design. I have a cnc. And procarve software. I think I could tweak your plan to fit my Jet 1440. Any suggestions as to modifying the size of the ring diameter?

[@ShifarAbdoelaziz]

Hi! Thanks for the vid. I see most people use roller skate wheels for the rest. Why not just plain metal bearings? Would it leave significant scratches on the wood? Thanks in advance!

[@WolfRidgeWoodworking]

Thank you Shifar! I'm not really sure, but even with the skate wheels, you need to wrap tape around the piece to protect it. Take care! - Ed

[@glencrandall7051]

The upgrade looks better. Did shaving the bottom have any effect on centering? Thank you for sharing. Have a great day and stay safe.

[@WolfRidgeWoodworking]

Thank you Glen! I cut off an inch and it still leaves 1.5" on the base. It is still off center a little due to the material thickness, but it did improve the ability to turn larger pieces. - Ed

[@lakeshorewoodturner5136]

Looks awesome. Which one do you think would fit a 14" lathe better the original height or the shorter one? Would you be interested in a sticker swap?

[@WolfRidgeWoodworking]

Thank you Michael! Technically they both would work, but you would be limited to the size of your project. I will work on putting together plans for a 14" on. I would love to swap stickers. I'll DM you on IG and send you one of mine. Take care - Ed

[@corysargent5234]

Great video. May I suggest a better hammer?

[@WolfRidgeWoodworking]

Thank you Cory! More tools...heck yeah I'm open to a suggestion for a better hammer! - Ed

[@fitznottle]

What's the music you use at the start of your videos ?

[@WolfRidgeWoodworking]

I found the artist on artlist.io and it's Rock this joint by Yanivi.

[@WolfRidgeWoodworking]

I actually just heard it used in one of the floor exercise events in the Olympics. I was like that sounds familiar.

[@myhoneyshandmade1077]

Have you actually sold one of those steady rests that you make? I also have the jet 1221 and would be interested in a steady rest, But don’t have a Cnc

[@WolfRidgeWoodworking]

I have sold them. I have this version listed on my website if you would like to order one. - Ed

[@myhoneyshandmade1077]

@@WolfRidgeWoodworking great. Can you share the svg file? I just bought a laser and want to make one.