Cleaning the Dyson V15 DETECT LASER SLIM FLUFFY Brush Bar

[@karkhuiho9223]

How to remove the hair stuck at the gear right next to the laser component

[@c3nsr]

use small scissors to cut the hair and then pick it out, works like a charm

[@Sam-rx8wd]

Even easier with one of those Stanley knives/box cutter knives

[@j.m.9918]

Cuantas horas de uso dura el laser? Aprox 🙏

[@nathusop6472]

Cutter, just cut softly the hair and it’s easy to put out

[@genevieveacteau7453]

What about the large wheels at the back of the brush head? It gets full of dog hair and I can't find a way to take them out...is there a way? Thanks

[@taylorschram1399]

Did you ever figure out how to do this?

[@diamondnick5983]

@@taylorschram1399 what I do is just use a Sharp tool and slowly peel it off

[@taylorschram1399]

Yea I used a few different tools which eventually got the job done. Not something I’d like to do all that often but I guess it would be easier than letting it get out of hand

[@HPSauced]

I have the same issue with 2 retrievers. Wondering if anyone has taken a flathead screwdriver to pop out the roller? Afraid of breaking the plastic....

[@gingerpowell5644]

With a German Shepherd I have to stop and clean the wheels out often...I just pick, pick, pick! I hate it. I wish there was an easier way! Someone suggested using a seam ripper so I've been doing that along with needle nose pliers.

[@MrAstygmatyk]

Just bought my Dyson beast so naturally I'm on the outlook how to serve it properly. And this video is really helping Dyson owners to properly maintain the gear. Thanx aplenty, mate!!!😇

[@antonityminski8999]

But how to clean small wheels blocked by hair?

[@nathusop6472]

Cutter, just cut softly the hair and it’s easy to put out

[@tonybatten5884]

Excellent video and very helpful - thank you. Couldn't work out why my machine kept giving the 'blockage' message when the canister and tube were clear - your video helped me find the hidden blockers in the head

[@apollotiger]

Our brush head was starting to look a little dirty, and I started to worry that it wouldn’t be serviceable. Thanks for the helpful video!

[@tivermusic]

This was a great tutorial. Thank you very much especially for explaining how to mount the brushbar the correct way!

[@kaym1123]

Who has time or reads manuals anymore? Thank you very much for this quick and helpful video!

[@MxPxRobbie]

Thanks! Ran over some sticky stuff that I didn't see and needed to clean the roller desperately!

[@debpratt4692]

I am SO THANKFUL for your video!! All of the other ones show using a coin..mine has no coin slot!! Thank you!! Thank you!!!

[@skcreedon]

Excellent video. Thank you very much. You've spared us a phone call to Dyson!

[@lilmizzk]

Exactly what I needed. I'm embarrassed by the amount of hair that was wrapped around the inside of the brush 😳

[@Woopnik]

thank you for watching , im glad my husband's videos is still helping people after his passing

[@atore123]

​@@Woopnik❤

[@pOOlarisking]

So how do you clean the small roller wheels? Ours are full of hairs and barely turn

[@nathusop6472]

Cutter, just cut softly the hair and it’s easy to put out

[@Christina.N.]

Very helpful video. I'm always scared il force something and break it, but your video was very reassuring and covered everything.

[@fideba1]

Excellent, just what I was looking for, thanks !

[@OldFatGit]

Genius. Thank-you! Reminds me of Prof. Heinz Wolff!

[@Simone22d91]

I couldn't disassemble this brush to replace the plush strip, it's really difficult

[@Billmc997]

How do we remove hair that’s stuck near the other end near the laser side? I have hair that’s wrapped around a small crevice right near the green laser wrapped around the end? I can’t remove it so I cut the hair but there’s still hair stuck in there.

[@garylbowler]

Highly appreciated! Extremely beneficial!

[@11grisen]

What about the small wheels mine is full of hair 😢

[@Woopnik]

hello thanks for watching, sorry Michael wont be able to answer your question my husband passed a year ago

[@tamelawade3382]

Clear, precise instructions. Thank you!

[@BuhNanaz]

Thank you for the very informative, clear video!

[@Mr.F0xx]

My laser light stop working,any ideea how to fix it ?

[@EggZema_]

Very nice and detailed explanation! It was very helpful

[@Bernie3000]

I want that Bender print.

[@matttulkster]

This guys videos are great thanks for the cleaning Tips have just done my V15 after long over due clean

[@montsesalas3919]

Hi, How do I clean the inside of the transparent screen. I have two enormous dogs (MASTINS) and this screen gets very dirty in its inside and even their hair gets stuck and obstructs sometimes the hoovering hole. Thank you.

[@KS-zd4ew]

There’s black black screws just find the suitable screwdriver head to unscrew 4 of it

[@RichardLapierre-e4r]

Thank you so much Sir ! have a nice day

[@lucianacahu7394]

Muito obrigada pela explicação. Não falo inglês, mas deu para entender tudo. 😊

[@DangerousDan79]

would be good to see you clean a dirty one. I had to wash all the little wipers with water. and use water to clean inside the head.

[@perrette5183]

the purple joint between orange motor ang grey is gone , you too ?

[@theresabarnes2608]

I have this exact brush it doesn’t take 24 hours to dry just wash it dry it and put it in front of the fan it’ll be dry in a couple of hours if that.

[@gefgal]

Brilliant Simple to follow and it works

[@perrette5183]

NO soap on the brush ?

[@Woopnik]

hello thanks for watching, my husband passed away more then a year ago, no soap on the brush

[@gerdaprusinskaite8490]

thank youuu! it really helped :)

[@adriendouble5131]

Thank you, very nice advice and it work well !

[@richardr1971]

Excellent, thank you.

[@AbdulMudabbirKhan]

How to put bin back on Dyson gen5detect

[@lucywightman]

Excellent and so helpful❤

[@viswagururatan]

good way of explanation

[@cananilter5658]

Thank you so much! I could only with this video o could put the lazer head in place! Not with Dyson video.

[@vamosgr89]

can I use soap?

[@alexat8421]

Thank you so much for this! :)

[@davidgraflex2065]

I love Dyson vacuums but cleaning vacuums them selves is a nightmare

[@beygirbey]

excellent video many thanks

[@vickyross9999]

Great talk through. Helped a lot. Thanks

[@Woopnik]

You are very welcome Vicky. Have a wonderful weekend 😋👍

[@FatmaYilmaz-q7l]

Best video😊

[@buxon9966]

Wow! Everyday new video! I like it 😎

[@Woopnik]

😋👍

[@richardghalayini2666]

Thank you kindly very helpful information much appreciated

[@angeleyes7531]

Thank you!

[@pell557]

worked great, thanks

[@mwsellox7751]

Ooooeeeehh It's very wet. Great tips thanks

[@LadyTusker]

Thank you so much..

[@sebgc]

I have many dark spots at 45 degrees. They show up after 30s of using it. Am I the only one?

[@chris-tf8ud]

Very Good thank you

[@gregg7626]

What is the logic of using cold water to clean the brush bar? Doesn't hot water and soap clean better?

[@Woopnik]

hello thank you for watching, this is michaels wife, my husband wont be able to answer you he passed away last november

[@gregg7626]

@@Woopnik I'm very sorry to hear that. I wish you peace.

[@CatNoda]

EXCELLENT! THANK YOU!

[@MW-qv5ox]

Is it normal for the head to not spin very fast?

[@Woopnik]

hi sorry my husband wont be able to reply, he passed away a year ago

[@MW-qv5ox]

I’m really sorry for your loss.

[@playmaker1011]

Thanks a lot!

[@damngoctu1]

Thankk you

[@kristinailicheva9208]

🎉 thank u

[@trishbeauchamp1745]

Very helpful, thank you

[@milktea9501]

He passend away 😢

[@georgescharitat1113]

GREAT !

[@elememelon9175]

That was awesome

[@АлександрФесенко-ъ7х]

любая модель ужас кубик рубика! самый лучший. шмель !!!!!

[@alessiocaruba7868]

10 +...thank!

[@KS-zd4ew]

😢 i accidentally wash the head under water for few minutes , realized it has a electronic board inside

[@Ks-ccc]

👍

[@morris9496]

That floor needs more than a Dyson...

[@snearboy42]

Thanks for the video!!

[@vinsang3283]

hello the laser brush of the v15 is it compatible with the v11 absolute pro? thank you

[@Woopnik]

Good Morning VINSANG. Yes, it does work with the V11 and V10. Have a great weekend 😀👍

[@vinsang3283]

@@Woopnik thank you 😁

[@Woopnik]

😋🤓 You are very welcome 🤗

[@Woopnik]

Also, interestingly enough, the laser is not powered by the V15 directly. I figured this out after pushing the laser fluffy head on carpet without the machine running and the laser lights up if you push it fast enough. Must be using the rollers motion to energize the laser. Pretty cool stuff!

[@vinsang3283]

ok great that's cool thanks for the info 👌😜

[@maurovitullo7157]

Hello, what about pulling the little wheels off? I have dog hair tangled all around both wheels and I can't remove it efficiently. Any guidance would be much appreciated!

[@Nikitikitavvi]

I popped them out. You can use a thin tool for that. Sort of scoop it out

[@Woopnik]

hello thank you for watching, this is Michael's wife , my husband passed away a year and a half ago, im sorry i cannot answer your question

[@maurovitullo7157]

@@Woopnik I'm sorry to hear that, my condolences and I hope you are well. Your husband was a very helpful member of this community. Take care.

[@barbarariley5261]

@@Woopnik Thankyou for telling us about Michael’s passing. I hope that it’s some comfort to know that he was valued by many people across the globe. He explained things so clearly and helped a lot of people like me. Condolences from Barbara in Australia.

[@lilikoimahalo]

Thank you so much 😊

[@rajatchopra3927]

Thank you so much!!

[@kirstihirvi8604]

Thank you so much!

[@arinaignatyeva4297]

Thanks a lot

[@МаргаритаМосквичёва-х1д]

Thank you so much!