WORK Meister S1 3Piece 19x12.5 on a Widebody '93 MR2 Turbo

[@MR2VIDS]

@EvaGoN The front is only 18x8.5 so it has some clearance. The new 18x10 is getting fitted in a few weeks and that will be a very tight fit. The rear has less than 1mm clearance between the inner barrel to the strut housing. I think there is a picture in the video where my friend's finger tried to see the inner clearance. And as you can see, there is not clearance from tire to fender; the fender sits on the tires =P

[@DB06z33]

lol yea thats mine. Its in the shop right now redoing the wide body. I sold the s1's and now have vs-xx 18x12.5 with a negative 3 offset in the rear with 315/30 tires and an 18x10 with negative 7 offset with a 265/35 tire. If you're ever in NY we need to do a photo shoot together!

[@MR2VIDS]

@iLIVEPOSITIVEXXX The new set of Meister was $3,100. The rear tires were $150 each, mounting was $25 each.

[@MR2VIDS]

@erikblazer13 lol. The car turns just fine =) The widebody fiberglass fenders are flexible; they flex when the tires hit them during cornering or hard braking. Also they shave the tires when rubbing, unlike metal fenders which cut through the tires. But you're right: when I take hard turns (freeway on ramp) going fast, I smell burned rubber alllll the time =D

[@xExRxIxCxKx]

@MR2VIDS that would be cool i could use some pointers on removing short sidewall tires i've only done a couple and they were a pain lol

[@MR2VIDS]

@ap229 $3,450 shipped, without tax since it was purchased out of state. The 4 tires are about $1,000 on top of that

[@MR2VIDS]

@xExRxIxCxKx I was told that the machine cost almost twice than the average Hunter machine; this one is almost touch-less, the operator doesn't need a metal bar to seat the edge of the tire. Also the attachments are all plastic, doesn't scratch as much as those metal ones. The wheel is bolted to the center hub, unlike other machine which grabs the lips and scratch it. 285/30 on 19x12.5 is not that much stretch, as shown in this video, it just mount easy. Thanks for the compliment=)

[@MR2VIDS]

@mr291lover What an eagle eye =) This day was just a test mount for the tire to see clearance. I could only bring one 19x12.5 on the passenger seat, since it does not fit in the front nor rear trunk. So the 2nd day I went again and bring the other one, and after mounting the 2nd tire to the other wheels, I swap the wheel to the correct side. Then I brought 1 of the old rear wheel/tire home, and next day I took the last one. The joy of only having one car.... =(

[@MR2VIDS]

@EvaGoN In the inside: If you take a piece of paper, fold it once, that will not clear the inner barrel to the stock housing. On the outside, the tire almost sits on the fender, so yeah.... :D

[@xExRxIxCxKx]

oh and btw do u ever go up to gmr anymore? I used to go up there in my 95 integra sedan. i only had coilovers and decent tires on 16x7.5's. i wanted to do so much suspension and chassis rigidity work on it, til i hydrolocked the engine. its sitting in my grampas driveway without a head right now til i can fix it. bent 3 valves -_-.

[@madmix2009]

THATS BEAUTIFUL GETTING THE SAME SIZE TIRES BUT 18'' ON MA MK3 SUPRA

[@MR2VIDS]

@interlagos80s It's hard to stretch tires on 18x8, since it's not wide enough. 215/35 on 8" wide is super baby stretch; the stretch is so little it almost doesn't look stretched. There is no 205/35/18, so you're stuck with non stretched looking setup. 225/40 and 235/40 will not look stretch at all on 8" wide, they're square That's why people go with wide wheels so they can get good stretch on them.

[@rcteddy2008]

holy shit! i work at a tire shop and the thinnest tires ive seen are the 35 series but never a 30 series tire. :o thats basically like a rubber band on that wheel! lol! looks straight tho!

[@interlagos80s]

@MR2VIDS ahh, thanks for your fast reply! that explains alot! would 9inch wide rims be good? if so what tires would i have to use for the stretch look?

[@interlagos80s]

hey, awesome tires, could someone please tell me how to give tires the right amount of stretch? i have 18 inch rims, 8 inch wide, i am currently using 225/40 tires but I would like to buy ventus v12's, but what size will give me that same stretch look in the video? would i have to go 235/40? i have no clue about tires. thanks

[@marcAB10]

stunning MR2 bud, i've just bought a new set of S1's (see my videos) for my supra, good to see what the stretch is like on 285 on 12.5" rear, i think i'm going for 275 on my 11" rears.

[@erikblazer13]

@MR2VIDS Oh man i hear you on that, im always trying to make my little S-10 2002 look great, keeping it all stock except the radio that is hahaha, always washing and waxing ;D

[@MR2VIDS]

@interlagos80s @interlagos80s I prefer stretching tires by choosing lower profile tires instead of skinnier tires. So let's say you have 10" wide wheel, then 225/35 is a nice stretch on it, instead of 205/40. This way you get to run wider tires (225 instead of 205) for more contact patch, and still stretching for clearance. x9 is a good width for the front; go with 215/35

[@ap229]

i want these rims so bad for my ek man how much did they cost you if you dont mind me asking

[@jaywilliams3423]

Definitely want a set of these on my FD !

[@kaydenjase6917]

i know im randomly asking but does any of you know of a tool to log back into an instagram account? I was stupid lost the account password. I love any tricks you can offer me

[@aldencorbin3126]

@Kayden Jase Instablaster :)

[@kaydenjase6917]

@Alden Corbin Thanks so much for your reply. I found the site thru google and Im waiting for the hacking stuff atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.

[@kaydenjase6917]

@Alden Corbin it worked and I finally got access to my account again. I'm so happy:D Thanks so much, you really help me out!

[@aldencorbin3126]

@Kayden Jase Glad I could help :D

[@tnasituning8173]

haha understandable ...well I didn't know that about them...I actually have the power steering pump there but I don't have the belt on, but yeah I'm going to have to get a belt on there & check that out, try the AC turn ovet trick...i was thinking maybe it's the seal going cause Dave @twosrus mentioned it to me...good to know both scenarios though

[@MR2VIDS]

SW power steering is electric. There's no belt. What car do you have ?

[@MR2VIDS]

@madmix2009 Nice! Get some fat rubbers to fill the rear Supra fender! =)

[@gav240z]

Looks good mate, I like the wheels want a set for my FD RX-7 aightt....

[@MR2VIDS]

@sixins Thank you much for the compliment =)

[@MR2VIDS]

@bimmerE9Xfan Paul, I've been driving on the those stretched tires for almost 40K miles without any accidents. Just make sure you run more than 45PSI tire pressure to keep them inflated and nicely seated. Those who say it's dangerous just have no balls to do it ;) Cheers!

[@EvaGoN]

dude mad respect but.. holy crap how much clearance do you have with the rim? holy angelina joliee

[@erikblazer13]

Ive watched several of your videos, how the hell do you turn? lol

[@tareck9766]

these rims look so goood on this mr2

[@MR2VIDS]

@erikblazer13 Thanks Erik =) The style is not for everyone; I have to admit the car does not handle as great as other cars. But it's my daily and I need it to look good more than I need it to perform, lol

[@MR2VIDS]

@Widebody93 What's your wheels and tire specs on your car? But anyway, thank you for your insightful comment =) Different strokes for different folks.

[@uwu_h2236]

I don’t want to sound dumb but how do you ask for stretched tires?

[@xExRxIxCxKx]

@MR2VIDS yeah if he gets enough business it'll pay for itself with the short installation times. i can see taking off the tires would still be kinda shitty though,

[@MR2VIDS]

Did you go to WekFest last weekend? I don't foresee any traveling to East Coast but when I do, I'll let you know. Your current spec on the VS-XX is almost similar to mine, but yours is more aggressive. I have 18x10 +5 and 19x12.5 +5, 235/30 and 285/30 Should post new videos with new wheel fitment!! =)

[@elfino7644]

Gorgeous car love it where you got them wheels man am crazy looking for them

[@MR2VIDS]

@DB06z33 Is the Blue Z Turbo yours? Gawd damnn, it looks awesome on the Gold S1!! Gold on Blue, remind me of Subaru Rally Art cars =)

[@MR2VIDS]

-3.7 front and -4.2 rear is not a lot of camber. Easily achieved by OBX camber bolts, available on eBay for $30. If you want something fancy, get camber plates.

[@bimmerE9Xfan]

Gorgeous wheels and awesome tire-stretch job! Beautiful MR2 as well and I love the colour (saw on ur other video it's Rosso Corsa). How safe is it to stretch tires like that? I keep hearing that it's not safe, but personally I can't see why and I love the look. -Paul

[@MR2VIDS]

I'm guessing you missed the 00:28 footage, since the place name and location is there on the video =D Supreme Power in Placentia, California. Supremepowerparts d0tt c0mm

[@mxriderrut992]

How! I've been trying to get 285/35/19 on this exact same wheel same specs for weeks. 3 tire guys, cheetahs, ether. Wtf

[@MR2VIDS]

Not on this one. I had spacers on my previous set of Meister. That's why I got my 2nd set of Meister, so I don't have to run spacers anymore =)

[@MR2VIDS]

@gav240z FD with Meister looks awesome! Get them! =)

[@MR2VIDS]

@EdaP79 Well....not really... '93 MR2 Turbo is about 6 grand, and the wheels are only 4 grand. So you're way off =P

[@mr291lover]

the passenger rear tire mounted at 3:30 is going in the wrong rotation :(

[@MR2VIDS]

@marcAB10 Ah, nice! They are so shiny, lol. It's worth the waiting time huh? 275s on x11 should look good on Supra =)

[@MR2VIDS]

@JxPhan List price is less than 4 grand. I got it for $3,300

[@RikyJZ7]

where did you buy that bodykit?

[@MR2VIDS]

@masterbaeten88 I didn't know SP before I placed my order; it would be cheaper if I ordered from SP coz I can pick them up and don't have to pay shipping from San Diego (I bought them from Speed Alliance) Supreme Power does a great job! =)

[@VeddieFonnie]

how do you have so much negative camber?

[@SNEEPER1980]

those are some sick ass rims................

[@MR2VIDS]

@rcteddy2008 Wait until you have customers with 20" and up, they run 295/25/20 or 335/25/21 =P

[@biglou9662]

Hey bro, you work at the shop? I was wondering if you guys have a 18x9.5" and 18x10.5"?? And what tire brand do you have? Just the smaller one for the front and wider for the back.. Do you have the same one like that in 3 piece version?? Is for my car.. And what is the sizes that fit in a 335 size tire?? Thanks..

[@andersimfroeder]

how much for the set ?for 1991 supra ?

[@MR2VIDS]

All good my Toyota brother! =) Got them from Speed Alliance in San Diego, but also, Supreme Power is an authorized dealer for Works. Just google them both for phone number and ask for quote and compare them. Ask for Tham at Supreme Power, or Jay at Speed Alliance and tell them the Red Devil Widebody MR2 sent you =) PS: I waited 8 months for my Meister 2 years ago

[@tnasituning8173]

yah with those big meats you have on it I'm sure it's needed...have you driven an SW20/21/22 with a manual rack to kind of get an idea of comparison in the ride, and controlling the car?

[@MR2VIDS]

Maybe you've experienced this before or at least heard about it. The PS on these 20+ years old SW sow times get stuck. The solenoid gets stuck and the PS light turns on and you don't have PS. Either you accept it as is, and drive it like that for 2-4 days, or you can cycle the ignition key to AC for 20 times to reset/unstuck the solenoid. So yeah I've driven my car several days without PS and I have to tell you, it isn't comfortable and it isn't fun, at all. I guess I'm spoiled for having it for years

[@nibbzs15]

Looks sick!

[@andersimfroeder]

how much ? for my mk3 supra this set ?

[@tnasituning8173]

Armand what's the widest wheel I can fit in a 19 on the back without stretching the tires that much as you did just a little stretch I want to go with a 19 x 12 with the most + offset I can without hitting the spring...but but I could live with just a slight tad rubbing on fender...I want to go with a 255- 35-18 (which i have already) on the front and a 295-305 out back... I realized those 255 in the front I'm going to need some extra rocket bunny style fender flares or another set of fenders over the stock TRD fenders which I've been prepping I could show you the pics on my FB page...

[@MR2VIDS]

I was running 295/30/19 many years ago. But the rear back then was 9". Still doable with 12" just need correct offset

[@MR2VIDS]

@xExRxIxCxKx Next time I get new tires, I will take vid of the un-mounting procedure =)

[@biglou9662]

Where is your shop located at in SoCal?? I want to come by and check it out.. Thanks.

[@MR2VIDS]

Look up Supreme Power in Placentia

[@kassop]

no spacers needed?

[@tnasituning8173]

Right now I got 18X9 +22 front 18X9 +15 rear definitely looks like I got at least a few more inches in the back the front is pretty much maxed out with a 235-35 tire...Sergey from Sergey's House of Wheels has a 245 on the front without even using a TRD wide-body just a good Fender pull and roll! I guess? but of course that's on a 17-inch rim... Long story short do you think I can squeeze a 305 out back or 315? How much clearance (in mm) would you say you still had with the 295? I'm running the BC racing coilovers and I pretty much like them alot but I'm thinking about switching the BC Springs out with stiffer Eibach Springs or Swift Springs... I also have a pair of Ingalls camber bolts if I need em for the front (or rear)...

[@MR2VIDS]

His front fender is galaxies away from "fender pull and roll". He cut up the fenders , extend it and weld to shape it wider.

[@cliffsimms8520]

this car looks so damn gd even with the wing not fixed

[@tnasituning8173]

Ah gotcha, well I'll have to go through my documents & find out, now you got me curious...

[@erikblazer13]

@MR2VIDS Notgoing to lie bro, that is pretty bad ass haha

[@MR2VIDS]

@xExRxIxCxKx Sorry to hear about your engine =( I don't go to GMR anymore, maybe one day when I feel like I wanna raise the car, lol

[@tnasituning8173]

I wonder who had the Ferrari Rosso Corsa paint first me or you LOL?

[@MR2VIDS]

Got it painted summer 2009. I'm sure we weren't the first two to have that paint 😁

[@tnasituning8173]

When I said I had the Rosso Corsa paint done long back and you said you had your car painted back in 2009, that made me assume that you were Armand??? Lol I'm confused now

[@MR2VIDS]

My car was white, before it got painted Rosso Corsa in 2009 😊

[@tnasituning8173]

had any problems with your manual steering rack? kind of sounds like something in the driver side strut Tower but there's a little play Down in the rack? seems like when me and the guys at the shop checked it out, kind of hard to tell?

[@MR2VIDS]

I'm sorry, I'm not familiar with that problem. My car has power steering

[@xExRxIxCxKx]

setting the bead with that tire looked fairly easy for that guy. I guess thats not on the more extreme side of tire stretching? and mounting it looked super easy too with the two attachments. i've tride mounting short sidewall tires with just metal levers and the duck and i gotta say it sucks real bad. sweet mr2 btw the meisters and widebody look fuckin tits.

[@masterbaeten88]

i ordered my jlines through supreme power :)

[@MR2VIDS]

Sorry, I love them too much I have two sets of them. So I don't think I will sell them =) Worse come to worst, I'll put the wheels on another car. You can buy used, look in zilvia dot net, wheels and tires section =)

[@MR2VIDS]

I thought the VW people were the first to stretch tires? 0_o

[@EdaP79]

@MR2VIDS so in other words, your wheels are worth double what that car is lol...woooooow????

[@VeddieFonnie]

must eat up the walls of the tires. looks nice tho

[@MR2VIDS]

Toyota of Japan

[@Kn0rK3n]

yeah but the distance between tires and body isn't even existing :D

[@MR2VIDS]

@andersimfroeder Iono, I don't sell wheels.......

[@tnasituning8173]

Who's his? This isn't Armand I'm speaking with on here? that's not your MR2??? My vendors have already been pulled and cut so I'm good I won't have any rubbing issues on the metal trust me! Just the lip of the fiberglass

[@choua01]

thats hella flush!

[@Mr_SoulFresh]

pretty as hell

[@jackcollin1695]

Danggg the wheel set is more expensive than the car value on this video.smh

[@MR2VIDS]

about 4 grand before tax and tires

[@MR2VIDS]

@mxkcrm Ah, really? That's the place I spend one hour going to work and home, stuck in traffic. Bleh

[@MR2VIDS]

@ajh1031 Don't we all? ^__^

[@Aisyah3778]

good

[@mxkcrm]

Ive seen this car on the 405-N Lol

[@MR2VIDS]

Thank you =) They're Work Meister. Have a look at their website when you have free time: workwheelsusa c0m

[@Kn0rK3n]

in germany you would get arrested for that xD

[@vnarfasen2691]

Alus euyy

[@MSkoops]

1:10

[@melody3741]

i woulda gone with 17s

[@DB06z33]

I have the same wheels but in 19x11 with a 305/30/19......urs looks like pure sex though

[@serchmarc]

WRONG ALIGNMENT WRONG SHOP...

[@daniellucasr]

large...

[@positivesecret]

FIX THE DAMN WING

[@MR2VIDS]

You're gonna pay for it? Why are you so concern?

[@positivesecret]

MR2VIDS oh wait your short on cash ? i just assumed with all the modification you had money, id at least take it off. looks like horns and serves no purpose .

[@MR2VIDS]

A drunk guy broke it, i just don't want to fix it. Trust me, money isn't the issue.

[@positivesecret]

MR2VIDS anyway ,that car is still gorgeous , good job

[@transokevin6567]

😄😄😄

[@Widebody93]

Tire stretching................GAY! VW class ruined the tire combo rim catergories!

[@ajh1031]