How to create a respiratory mask using CATIA v5 Generative Surface Design

[@franko2127]

Cartea dumneavoastră care ați scris-o, este extraordinar de bine explicată 👍👍👍👍 mă ajută foarte mult..!

[@workbenchstuff]

va multumesc !!

[@naviotx5221]

I tried drawing myself... it was really a good piece of work..thanks for sharing

[@ramonherevia624]

muy buen tutorial salu2 desde México

[@franko2127]

Super 👍👍👍..!

[@birdmansworld]

what happen to the rest of the video i only have half the pattern

[@workbenchstuff]

it was a repetitive task, too boring to display, so I've cut that part of the video, I really think you can do the rest of the pattern by yourself :)

[@everythingcadcreator]

You can pattern according to this video also kzbin.info/www/bejne/h3fXhp6NpMpnfZY

[@3DComparison]

Good model, unfortunately Catia is not that friendly with patterns alignment and multiplication.

[@waliullah472]

Hi workbenchstuff,Ihave been following this can you make punch cavity video for this model plzzzzzzzzzzz bro......

[@workbenchstuff]

this model is for 3D printing, but you can do it yourself, extracting the mask from a solid block

[@mukeshkumarcap4139]

Need more video.example life application product

[@workbenchstuff]

there are some good parts within my video tutorials, pls check the playlist

[@craigobrien8281]

Hi Workbenchstuff, i have been following this video but I am stuck at 10min 41secs of the video by the way i can not get the dot at the end to coincidence. i believe its to do the the Project 3D elements, when i try this command it shows a box were as your video it does this automatically, also i see on your left hand parts list you have geometric set 1 were as mine does not have this in the parts list. any help would be appreciated, Craig

[@workbenchstuff]

You can add the Geometrical Set from the Insert menu, it will store different elements like planes, curves, lines, points etc. Sorry for answering only for this question, I really can't answer all the questions asked by the KZbin viewers. Please follow the videos again.

[@workbenchstuff]

To answer about that dot: if you just can't select the dot, try to hide the yellow projected line (right click on it then select the Hide option). The dot should remain alone ready to be selected.

[@saulalvarezcebada5533]

@@workbenchstuff THATS right, i had the same problem but hiding the yellow line I fixed the problem, by the way excellent videos, thanks for sharing!

[@OleKristianElns]

Do you have a link to that drawing of the mask?

[@workbenchstuff]

no, but stop the video and make the print screen, that drawing will be in a Romanian book of CATIA

[@Anni-wn9dl]

Can you please mention the units for the drawing.

[@workbenchstuff]

milimeters, of course

[@moreaboutdesign]

Wahooo

[@rcnblackhawk07]

Commentary would be nice…😅

[@dgpoisestar]

while switching from surface to part modeling I am neither able to select several operations ....nor edge fillet