Working of Servo Control Valve Explain with Animation.

#ServoControlValve
#ControlValve
#WorkingServoControlValve
#TypesOfValve
Working of Servo Control Valve Explain with Animation
An electrohydraulic servo valve (EHSV) is an electrically operated valve that controls how hydraulic fluid is sent to an actuator. Servo valves are often used to control powerful hydraulic cylinders with a very small electrical signal. Servo valves can provide precise control of position, velocity, pressure, and force with good post movement damping characteristics.
An electric command signal (flow rate set point) is applied to the integrated position controller which drives the pilot stage. The thereby deflected nozzle flapper system produces a pressure difference across the drive areas of the spool and affects its movement. The position transducer (LVDT) which is excited via an oscillator measures the position of the spool (actual value, position voltage). This signal is then demodulated and fed back to the controller where it is compared with the command signal. The controller drives the pilot stage until the error between command signal and feedback signal will be zero. Thus the position of the spool is proportional to the electric command signal.

[@uttamsingh3097]

This is by far the most accurate explanation of servo valves.

[@beginnerstechnicalclass-in1838]

kzbin.info/aero/PLxB6-oZ6-9MIEAb-I8YvuKu4PEQyEvpRL

[@shovonjoybhattacharjee9667]

Hi. This tutorial is so helpful. For better understanding, please provide the working animation of servojet pilot valve.

[@AjayiPelumi]

This is beautifully made, thank you very much!

[@eswyatt]

The feedback wire re-centers the flap when the spool reaches the prescribed position. The "servo" in servo valve refers to the spool position, not the actuator position. Spool displacement is the first derivative of actuator displacement.

[@jagdeepsahEngineering]

John ji right

[@aadeshjain6430]

Wonderful explanation..

[@adityakshirsagar6059]

Thank you sir

[@beginnerstechnicalclass-in1838]

kzbin.info/aero/PLxB6-oZ6-9MIEAb-I8YvuKu4PEQyEvpRL

[@youtubechannel231df]

Like!

[@peterdilworth3110]

that initial sound is pretty painful to listen to, way too loud

[@baekyeonultraprecisionnkl9574]

How are you we are ultra precision company BAEK YEON thanks.