World’s Cheapest VRX with H265 compatible with all goggles! OpenIPC FPV with VENC/VDEC

[@artem56881]

I hope the system you are doing is going to repeat the way of elrs, when big manufacturers will start making hardware special for fpv. Thanks you guys ❤❤

[@mariofpv]

I’m pretty sure that the Chinese manufacturers are already subscribed to the channel and monitoring it closely. It’s an honour for being part of it as a developer of OpenIPC. Cheers mate!😊🍻

[@ivanfpv1767]

Que grande eres Estoy deseando probarlo Se podrá configurar el osd con los parámetros de betaflight?

[@DirtNDrone]

Amazing job mate! I can't wait to get the full tutorial on this project..

[@mariofpv]

Cheers mate!😊🍻

[@letamanfly]

Great work mate, Taking FPV forward singlehanded. Hope to see your system grow. Thanks for the video.

[@mariofpv]

Cheers mate!😊🍻

[@breakfire9712]

this is tremendous stuff man, congrats on all your hard work, look forward to seeing how this progresses :)

[@mariofpv]

Cheers mate!😊🍻

[@Lensr]

This is absolutely unreal. My dream. More people need to see this

[@mariofpv]

Please share this awesome news. Stay tuned new video is coming this week. Cheers mate!😊🍻

[@kdta91]

This is making a great progress with the OSD! Can't wait to try this out.

[@mariofpv]

Cheers mate!😊🍻

[@ndcapper]

This is very interesting! Hopefully gains momentum and becomes an inexpensive contender

[@mariofpv]

Cheers mate!😊🍻

[@mr.baphomet-fpv]

The latency seems not bad. Great work man！！

[@mariofpv]

Cheers mate!😊🍻

[@MB-fs5te]

Fantastic project, hope it will develop further much like ELRS did. One question - the box when attached to the goggles has two antennas but the WiFi module in the the hardware description is a single antenna unit, what am I missing?

[@mariofpv]

You can use an rtl8812au WiFi adapter with two antennas. There are many options on Aliexpress. Cheers mate!😊🍻

[@nmrlab3807]

@@mariofpv I have the same question but what item do you recommend? please share the link to the one you have used if possible. Thanks a lot.

[@hsteven-kp2oj]

Fantastic! Can't wait to build my vrx module!

[@mariofpv]

We are here to help you in the Telegram group. Cheers mate!😊🍻

[@KonuralpBalcik]

I really liked it, these parts are very expensive in my country, but I always wanted a drone that works over a network like this.

[@mariofpv]

Cheers mate!😊🍻

[@damaralbaribin]

I really love what you do! Hi, I'm a student from Indonesia currently researching Aerial Mapping. While the present video format is very helpful, could you transform it into an article or perhaps create a KZbin playlist that implements this step by step? From building the air transmitter to setting up the ground station, I am a bit confused about where to start, what to buy, and so forth.

[@mariofpv]

Thank you for your comment and welcome to the channel. There is already a playlist in my channel called WFB-ng that you will find many useful videos. Cheers mate!😊🍻

[@damaralbaribin]

@@mariofpv Thank you.

[@DavidTaghehchian]

Amazing stuff. I love seeing updates from your channel as tese opensource HD FPV technilogies progress. A couple of questions I have been curious about for a long time now: 1. What is the latency of this system at this stage? 2. Have you tried reaching out to the channels with huge subscriber bases like Mad's Tech (Ian) or Joshua Bardwell?I bet they could help spread the word very fast and get yourself and the developers some added attention/support. 3. How can we (the FPV community) better support the OpenIPC developers directly?

[@hanelyp1]

A second on the latency question. My impression is H.265 isn't designed for the ultra low latency you want as a pilot.

[@DavidTaghehchian]

@@hanelyp1 I've also wondered that. From what I've read/seen, it's because h.265 is slower for unpacking (more compression than H.264), but can the transmissions efficiency gains balance out the glass to glass results of each one?

[@yunuszenichowski]

Since encoding and decoding is quick and cheap now, what about the data transmission? The Wi-Fi module you showed in previous videos looks very clunky and low performing, although I am not certified to judge that. I would in general be interested to learn more about how the signal is transmitted to the VRX, since that part still isn't entirely obvious to me after looking more into the project. Also, I am absolutely going to build this, but might wait a little until it's more refined.

[@nelo4047]

Looks solid, mate. Thou i gotta ask - why youskip a lot of important stuff? The soldered BEC on the nvr, how you fitted the wifi module etc. Are we getting more detailed tutorials or they will be for specisl users(patreon, sponsorships)? Nobody minds it - you are doing incredible work and it definately just that you get compensation.

[@mariofpv]

There will be many tutorials when we have everything ready. Currently everything is in Alpha state. Every day we are making progress. This project will change the FPV as we know it. We are offering digital FPV system at the same price of analog. Cheers mate!😊🍻

[@gmivisualsjason3729]

This is excellent..... really excited about what's next.. Keep it up

[@mariofpv]

Cheers mate!😊🍻

[@nmrlab3807]

Very promising development, thanks for the video. I am going to get the components to try this system. Thanks.

[@mariofpv]

Join telegram if you need any support. Cheers mate!😊🍻

[@cgarzs]

Extremely cool stuff. Though why only half hide the GPS coordinates? Did you intend for it to be a fun game for the bored to work out what exact field it was? Though 4:52 made it a bit too easy 😆

[@mariofpv]

Cheers mate!😊🍻 From the whole video your only question was about the location I flew?🤣

[@cgarzs]

@@mariofpv Yea this was your first video for me so I did have a few others, but your other videos answered all but this one and it has me mad curious😆

[@tubosolinas]

We have eaten our years over the bench! 😂 All the Aliexpress IP cameras i gathered over the years are now stripped of their heatsinks and under investigation for their compatibility with openIPC.Excellent content! Greetings from Greece

[@mariofpv]

Cheers mate! 😊🍻

[@bear-bones]

Very interesting! Keep the info coming.

[@mariofpv]

Cheers mate!😊🍻

[@AZ_LoneWolf81]

cool video! which goggles would be compatible with this setup or is this meant to be viewed via a monitor

[@mariofpv]

Any goggles with HDMI IN port. Cheers mate!😊🍻

[@YourDetector]

Thats so cool mate! What is the range with this wifi adapters? As far as I remember I have exactly this one laying around

[@VincentFPV]

Damn! this is unbelievable! Absolutely astonishing!

[@mariofpv]

Cheers mate!😊🍻

[@nguyenducquocanh4341]

Great project. Any plan to include audio in the future?

[@mariofpv]

Yes there are plans for audio but not as a current priority. We are now focused on low latency and high fps. Cheers mate!😊🍻

[@nguyenducquocanh4341]

@@mariofpv Awesome! Cheers!

[@vladizaimov850]

Great project! Thank you for sharing! I was wondering if the board has built-in memory for installing OpenIPC, or if you use an external USB flash drive to boot from, similar to the one in the previous video for the laptop ground station.

[@mariofpv]

We use the internal memory of the NVR for our project. Cheers mate!😊🍻

[@dzmrsp]

Nice work! I have one question. What is the advantage of VENC/VDEC over Majestic?

[@mariofpv]

VDEC can run on this VRX and has the lowest possible latency. Majestic can’t work with VDEC. So the combination VENC/VDEC can offer the lowest possible latency and the total cost is only 50$, all included. Cheers mate!😊🍻

[@Curiousity0309]

Very nice! A bit bulky, but really bareable.

[@mariofpv]

Thank you. Yes it’s the first version so there will be many future improvements. Cheers mate!😊🍻

[@k0r0e0s]

@mariofpv It looks good! Are the OSD data being received from the flight controller? Can I for example have iNav in the FC and edit/add more parameters to this OSD in OpenIPC?

[@mariofpv]

Since the system is open source you can do anything. Cheers mate!😊🍻

[@dronemacha]

I've been waiting for something like this since the first dji digital system... It makes me super excited. I guess we would be able to bring digital to the price of analogue

[@mariofpv]

That’s our goal. Cheers mate!😊🍻

[@notsogood4321]

i think you guys are reaching the point where openIPC is going to gain greater momentum with so many barriers for entry removed , its going to be easier to get more people involved . Thank you for all your hard work and the reliable updates its been fantastic to see all these developments and while i generally stick to sub 3 inch fpv quad my first 3 inch quad will hopefully utalize openIPC , loking forward to the latency results from the 120fps camera P.S do you source the IP camera modules from aliexpress , ive only ever seen modules being sold on that site , it seems very difficult to source the components locally (within the UK) and is it possible to find smaller IP camera's ? or is this as small as they get ?, i have alot of sub 3 inch quads so i wanted to see if i could setup an openIPC fpv system in one but so far finding a wifi camera with h265 encodeing in the size i would require seems impossible

[@mariofpv]

Thank you for your kind words. The head developer of the OpenIPC project has already announced that there will be an EU and a US warehouses with all the equipment plug-and-play. We need more support from the FPV community to make this happen as quick as possible. So please try to spread the word so that more people will get involved. I’m in London and for the moment I’m ordering from Aliexpress. It takes 12 days for the product to arrive. Not so bad, I must say. Cheers mate!😊🍻

[@daniel_li]

Yeah, 120fps are very promising product for the community.@@mariofpv

@@mariofpv looking forward to it. the next thing is to find more compact camera modules like one with a double stacked pcb that isn't so wide.

[@강아지씨]

Great!! Thank you for developing wonderful digital vtx system. There is other question. I have an Oculus Quest 2. I want the Quest 2 as a goggle. 1) Is there a solution that I use Quest 2 receiving directly from OpenIPC broadcasting signal? 2) If the above is impossible, Can I connect Quest 2 to USB WLAN card(RTL-8812AU...)?

[@Dosclic98FPV]

Curious to see some penetration testing on this system. I also hope that some freestyle pilot picks it up to try it! Are the cameras going to get smaller?

[@hanelyp1]

Other than possibly diffraction limit on the optics I see no barrier to a camera being shrunk to a small SMD device, a few mm across.

[@mariofpv]

Yes the camera is going to get smaller. There are already Chinese vendors that are working on it. With the 120fps camera we can safely confirm that there will be no problem with freestyle flights. I tested it and I couldn’t feel the latency at all. I’m not a pro freestyler, I can do a few flips and rolls and low ground ripping but that’s as far my skills go.😅 I mean I wouldn’t be able to do any more tricks with HDZERO for example. Cheers mate!😊🍻

[@Jakob-hj8es]

Really amazing project, was wandering how the latency is?

[@mariofpv]

35ms with 1080p@90fps. I have already posted some photos in my channel. New video tutorial coming soon. It will have the step by step setup of the Air Unit. Cheers mate!😊🍻

[@Jakob-hj8es]

@@mariofpv that's great, looking forward.

[@hanelyp1]

@@mariofpv So about 3 frame times. Not bad at all for using an off the shelf digital codec.

[@douglaskoo2354]

@mariofpv Do you use USB type C for you WiFi module ? Do you connect it to the USB port of the NVR ?😊

[@mariofpv]

I use usb type C. I soldered the wires on the pins of the USB on NVR. Cheers mate!😊🍻

[@KowalDrzo]

I can't see, where the antennas are connected. Is there any wifi module converting wireless signal to lan port inside?

[@TopCrinkly68]

Keep going men !!

[@mariofpv]

Cheers mate!😊🍻

[@inv_vision]

Still looking forward to the 120fps camera Solution! ;)

[@mariofpv]

Coming soon. Cheers mate!😊🍻

[@JustTwoOfThem]

Can you please build freestyle quad with it and give it to some freestyko pilot to try? good work, mate👍

[@mariofpv]

Sorry but I’m not going to give anything for free. If anyone wants to try the system they have to buy the cheap parts and test it. Cheers mate!😊🍻

[@JustTwoOfThem]

@@mariofpv I thought you would make a video where you would meet some freestyle pilot and give him a few batteries to try it out or something t

[@HobkinBoi]

"Sh!t is about to get real" lmao if I ever get into RC I need to make my radio say that.

[@mariofpv]

Hahaha I have it like that for years and I’ll never change it! Cheers mate!😊🍻

[@pirateradioFPV]

Needs higher bitrate to look better than regular analog and a proper MIMO solution for signal penetration. Analog at higher resolutions also exists but since they''re proprietary, nobody is looking into it either. Since hisilicon can output 720 and 2k, I''d rather have good lower resolution with higher perceivable image quality (less artifacting) combined with minimum latency for flying and write the higher resolution to a card as DVR. 720 only takes 1/4 of the bandwidth of the 1080, you could mimo the data like DJI does so it maximizes the datarate when signal is good and at bad signal conditions it focuses sending less data but more powerful signal by combining the antennas.

[@pirateradioFPV]

@@mjodr I'll believe it when I see it. Even my DVR looks better and that's the same, compressed just one less time but from about VGA resolution worth of data whereas this supposed to be FHD. So the compression excuse doesn't fly very well for the lack image quality. If you want people on board, you need to show them something they want 🤷🏻‍♂️

[@pirateradioFPV]

@@mjodr I'd rather not as I've spent the day unsubbing from the FPV content as I'm done with the hobby. But go ahead and make it great, I hope nothing but good for the project. Elrs got adapted fast and considering how lo-fi HDzero is, it shouldn't be difficult to at least match its performance. I still do feel the code should do MIMO priority for the penetration but of that's adding complexity into the system and ain't nobody got time for that.

[@OgopogoDG]

Really quick - do you have a preferred lense length - I am think either 1.7 or 2.8? I also notice the vrx you have linked is the HI3536e and not the HI3536DV1000 like your Facebook page - the only differences I can see is that one has built in wifi correct?

[@mariofpv]

I’m using 1.7 because I like the extra wide FOV. Have a look at my videos and see if it’s good for you. Otherwise choose the 2.8mm. Cheers mate!😊🍻

[@OgopogoDG]

@@mariofpv thank you 🙏 did you see my mention of your HI3536 link ?

[@Adrian-sd8ck]

nice video👍👍👍, how many kilometers of video transmission range can Openipc have?

[@mariofpv]

The maximum achievement was 106km with large patch antennas on the ground station at high altitude due to the curvature of earth. Cheers mate!😊🍻

[@AnugrahPrahasta]

THIS IS PROMISING bro!... WOW!

[@mariofpv]

Cheers mate!😊🍻

[@carlospavas]

deberias armar una guia paso a paso de el hardware necesario y su implementacion para poder conectarlo a mis gafas. excelente proyecto

[@mariofpv]

There’s already an A-Z tutorial on my channel. Check it out. Cheers mate!😊🍻

[@helircgd6187]

This is a banger, i really want to try it

[@mariofpv]

Links in the video description. Cheers mate!😊🍻

[@loicformont578]

Thanks for the great content, would the raspberry Pi 5 be a good vrx ? Thx 🙏🏻

[@mariofpv]

As an h265 decoder, yes, it would be a great option. But would it cost £14? The whole point of this project is to offer a digital h265 FPV system that is cheap af!🔞 Cheers mate!😊🍻

[@Buy-n-large]

I know I have asked this before, but would this system be good enough to install on an RC car? I am planning on adding FPV to a car and I will do anything but DJI. I just need good penetration, moreso than range.

[@mariofpv]

I haven’t done any penetration tests yet. So I can not comment on this. Cheers mate!😊🍻

[@o0julek0o]

If it's compatible with anything with an HDMI input, you could easily use a Meta Quest 2/3 headset. I know you can get a USB C to HDMI converter and then you sideload an apk for USB C camera input and boom. Someone tested it with a nintendo switch input to the headset. With that you get self contained goggles with a tonne of functionality (because it's just a good android device in there really) and crazy good quality. We're finally entering the golden age of HD FPV!

[@mariofpv]

Yeap, everything you mentioned is possible. Cheers mate!😊🍻

[@sethwalmsley5287]

Pretty serious heat sink that you added to the board. Do you think it needs to be that big?

[@mariofpv]

That’s the heatsink that had when I bought it. Yes it is needed. Cheers mate!😊🍻

[@sethwalmsley5287]

@@mariofpv Oh ok. the NVR i was looking at has a much smaller one

[@mariofpv]

I’m pretty sure we don’t really need a big passive heatsink. We could even replace it with a small 5V fan like we did in FrSky R9m module when we wanted to install ExpressLRS.

[@iammostwanted777]

How's the latency? Can you achieve 20-30ms? Any guide to install the system?

[@mariofpv]

On my latest video with the SSC338Q I have a glass to glass latency test. Make sure you watch the whole video to not miss it. Cheers mate!😊🍻

[@Superkuh2]

The HDMI out from the VRX isn't occupied in the video. Is that how you get video from the VRX to the headset?

[@mariofpv]

I’m using the HDMI output. There is also a VGA out option for anyone to use. Cheers mate!😊🍻

[@yatzeegamingop]

This may be the true beginning of hd fpv, not that proprietary software shit.

[@mariofpv]

Join the revolution and spread the news! Cheers mate!😊🍻

[@hanfo420]

This is something big.

[@mariofpv]

Cheers mate!😊🍻

[@tsohee9145]

Great! But how connection WiFi module and antennas to ground station?

[@mariofpv]

The WiFi module is connected to a USB port of the NVR. The two antennas are connected to the WiFi module. Cheers mate!😊🍻

[@douglaskoo2354]

Thank you @mariofpv for replying this query.😅 there is 2 usb port on that NVR , one for keyboard, one for usb2.0 WiFi dongle

[@mikedmann7487]

Very Impressive.. Ty 4 sharing.

[@mariofpv]

Cheers mate!😊🍻

[@BOTGRINDER]

so sick!

[@mariofpv]

Let’s go Botgrinder!!! Huge fan! There’s a new camera with 120fps coming soon! Respect from the UK! Cheers mate!😊🍻

[@saidinesh5]

The really interesting bit of all this is the ability to use something like X-real air glasses ... such a bummer that those glasses only go up to 60fps apparently.. But pieces are falling into place slowly. Would also be interesting to just hook up hdzero/walksnail goggles to a wifi module (Walksnail does have a USB port).. and HDZero has a sdio connector for wifi module. Good luck!

[@lililililililili8667]

walksnail only does video output

[@saidinesh5]

@@lililililililili8667 Their firmware can be modified though. Runs a basic linux system similar to dji.

[@stanislavalmaz4641]

Nreal air does 120 fps with new firmware, and new xreal air 2 also does that

[@Torin865]

can this ground station work without a laptop? purely on the DVR and monitor? Does the monitor work via VGA or only via HDMI?

[@mariofpv]

Yes. This VRX needs only a monitor or a set of goggles. Cheers mate!😊🍻

[@MikeCarr07]

@@mariofpv VRX is HDMI output?

[@mariofpv]

The VRX (NVR) outputs the video to the HDMI OUT port or the VGA. Then you need to use an HDMI to HDMI cable to connect the goggles to the HDMI IN port of the goggles.

[@MikeCarr07]

@@mariofpv thanks I just took a look at HI3536e

[@heinzfpv4787]

Love this!

[@mariofpv]

Cheers mate!😊🍻

[@Oledolerolf]

Hello again, need to ask. Is it possible to take parts from a bebop parrot drone and make to decent fpv cam?

[@salvatorebarbaro5862]

The hardware (Air Unit + Ground Station) costs less than 50$ (all included) and can be found EVERYWHERE. Dear, I need an FPV system to control a remote-controlled lawnmower, so it doesn't require an OSD and there isn't a controller like those used on drones. Can you show me some examples of transmitters and receivers to be able to view the video on an HDMI monitor? tk

[@mariofpv]

Please search in my community section to find a photo that I posted related to this. Cheers mate!😊🍻

[@nguyenducquocanh4341]

The manual of the wifi module says that we must keep a distance of at least 20cm from the transmitter to our body. Would there be any problem mounting it on the head set?

[@mariofpv]

No problem mounting it. DJI and other manufacturers are already doing it safely. Cheers mate!😊🍻

[@ferocious_r]

Sweet! One question still unanswered (video cuts straight from "this is the decoder PCB" to "this is the assembled enclosure"): which Wifi adapter on the receiving end? Still guessing it must be RTL8812au-based. from the 2 SMA adapters sticking out of the enclosure, still guessing it to be the Alfa AWUS036ACH plugged into one of the decoder board's USB connectors...?

[@mariofpv]

There are many WiFi modules that are compatible with the OpenIPC. Here are some examples: a.aliexpress.com/_EHLkcC3 a.aliexpress.com/_EIQHEqf a.aliexpress.com/_Eya7HZt Cheers mate!😊🍻

[@ferocious_r]

Perfect, thanks @@mariofpv, got everything in the basket and ready to order now ... just waiting for the next paycheck 😀

[@mariofpv]

@ferocious_r how much was it in total?

[@ferocious_r]

87,22€, @@mariofpv, but that includes 8,82€ in shipping for the two Wifi modules. The AliE shops behind the links you had posted will not ship to Germany, so had to choose different shops. Still not bad for a complete TX/RX solution, and a 2-way one at that!

[@mariofpv]

@ferocious_r thank you for the feedback. Cheers mate!😊🍻

[@charlesmarseille123]

awesome! I dont see the vrx batt voltage in the OSD, is it possible to add it?

[@mariofpv]

OK I will add it. Cheers mate!😊🍻

[@Narnald_Ewman]

So gangster!

[@mariofpv]

Cheers mate!😊🍻

[@djbis]

So it's a digital system that has analog compatibility as well?

[@mariofpv]

No. It’s a digital system that can be used with any analog goggles as long as the goggles have HDMI input.

[@IceFaceFPV]

FOR THE PRICE, ITS WORTH A TRY.....LOOKS CLEAR

[@mariofpv]

Cheers mate!😊🍻

[@gautamsenthilkumar823]

When will this vrx and camera will be available to use ?

[@mariofpv]

They are already available and many people are using them. This is a DIY project. You can buy the cheap hardware and follow the guides from the GitHub Wiki. Cheers mate!😊🍻

[@gautamsenthilkumar823]

@@mariofpv thanks 👍🏼 good work from india 🙂

[@narpat007]

Excellent !

[@mariofpv]

Thank you for all the support my friend! 🙏

[@cyberoverkill5844]

Does the VRX have to output 5.8ghz to communicate with the VTX like it does in DJI and Walksnail?

[@mariofpv]

Yes. Exactly like the DJI and Walksnail. You can also set a 2.4GHz frequency. Cheers mate!😊🍻

[@cyberoverkill5844]

@@mariofpv is it possible to use without transmitting?

[@mariofpv]

Yes you can edit in a file “majestic.yaml” the ip from 127.0.0.1 to whatever you want. It works like a regular IP camera.

[@hello81642]

Any update on when the aio units will become available?

[@mariofpv]

Not yet. We will have the prototypes ready in a few days. Then we will start testing and if everything is good we will start the second batch. Cheers mate!😊🍻

[@hello81642]

​​@@mariofpvthank you for the update. Will you reserve one for me so I can buy it as soon as it becomes available? I am on the fence between which fpv video system to use and I would like to get something soon. I would go with OpenIPC but only with your AIO for ease of setup.

[@mariofpv]

@hello81642 unfortunately I don’t have control of the store.openipc.org online store. Maybe they will send me a few pieces for my subscribers. Stay tuned 😊

[@RCDUDEFPV]

interesting, thumbs up

[@mariofpv]

Cheers mate!😊🍻

[@ellinoakendotiki_]

I wish I could find a smaller IP camera unit...I don't fly a 5 inch

[@mariofpv]

That depends on the FPV community demand. The more popular this project becomes the higher chances we have of getting a micro OpenIPC camera. Cheers mate!😊🍻

[@ellinoakendotiki_]

@@mariofpv One more reason to like and share your videos ♥️. Amazing job.

[@ArmageddonYT]

Do you have the stl file for the box of the vrx ? Do you think it's better to use pigtail ipx to SMA and then see for own antenna ?

[@mariofpv]

Yes I’ll upload them tomorrow and update the video description. I didn’t have the chance to test antennas and combinations. There are so many new things to test and no time. Cheers mate!😊🍻

[@OgopogoDG]

Alright - I think I am ready to bite in on this project. I remember when it still used a pi zero w2 and during Covid the resell market was crazy on that! Glad it got away from that now and into actual inexpensive hardware as it was intended.

[@mariofpv]

Exactly. OpenIPC has nothing to do with OpenHD. People are confusing it because of the name starting with “Open”. The only similarity is that both of them are open source. Cheers mate!😊🍻

[@Oledolerolf]

Sorry if im dumb, but is it possible to make an old phone, like samsung s9 to a groundstation?

[@mariofpv]

Yes if you install QGC and then forward the stream from the NVR to that phone. Edit the udp_address in the file wfb.conf which is in the /etc folder. Cheers mate!😊🍻

[@Oledolerolf]

@@mariofpv I dont know what NVR is right now, but Im about to read up and learn now when i know its possible. I just downloaded the img file from your other video and made a usb stick. So im on the way on making a laptop groundstation. But I need to ask. Cant u use the internal wificard in the laptop? And isn't possible to dissassamble a phone and use parts for the drone?

[@junkthe]

Is this wireless using wifi ? Or one way ?

[@mariofpv]

One way for video transmission and bidirectional telemetry. This means you can have video + OSD + RC link with one link! Cheers mate!😊🍻

[@junkthe]

Can you show me IPC-VRX pluged to UVC on Android Phone ?

[@mariofpv]

Sorry but I have iPhone. I think someone else already posted a video with that. Cheers mate!😊🍻

[@komyaginvalery6733]

Is it possible to record video on the camera side rather than on the ground station?

[@mariofpv]

Yes if you buy an expansion card that costs 5$. You will need to change a few settings in the majestic.yaml file. It’s in the /etc folder. Cheers mate!😊🍻

[@komyaginvalery6733]

Thank you very much for your answer. Could you please clarify which board exactly should I buy?

[@mariofpv]

a.aliexpress.com/_EvwJjhz

[@komyaginvalery6733]

Thanks a lot!

[@rendycog1097]

Sooooo Interestinggggg…

[@mariofpv]

Cheers mate!😊🍻

[@amoswolfe7122]

What is the weight of the stuff that you put in the air?

[@mariofpv]

I have weighted the electronic components in this video: kzbin.info/www/bejne/kJCXYnehpJJ8pc0si=1L4dtRWuwn-OcKJq Cheers mate!😊🍻

[@marinostsalis314]

Can I use a Hdmi to AV converter for older googles?

[@mariofpv]

Yes. Also we have good news for anyone who wants to use the VGA port as it is now working. Furthermore we added more resolutions, even custom ones! The user can just set the custom resolution in the /etc/vdec.conf file. Cheers mate!😊🍻

[@AndyDreadFPV]

Is there a way to get this OSD to look as nice as the OpenHD OSD?

[@mariofpv]

OpenHD can’t even run on the NVR. I suggest you to upgrade to OpenIPC. You will have less latency, better video quality, much cheaper components and h265 transcoding. OpenIPC is the next big thing in the FPV community. Join us! Cheers mate!😊🍻

[@AndyDreadFPV]

@@mariofpv I know but is there a way to get the fonts on OpenIPC OSD to look nice like OpenHD fonts?

[@HansBaier]

How much range do you get?

[@mariofpv]

Some pilots went 100km! They used huge patch antennas. Cheers mate!😊🍻

[@habibshuvo6431]

Why you not use a ip camera that can record vedio to a memory card?

[@mariofpv]

Who said that we are not using cameras with memory card? Have a look at my latest post on the community section of my KZbin channel. You’ll see an SD card slot. Cheers mate!😊🍻

[@habibshuvo6431]

@@mariofpv Sorry I didn't notice earlier. 😪 Thanks mate!❤️

[@fezfpv]

May i know what is the latency using this system?

[@mariofpv]

35ms. Cheers mate!😊🍻

[@fezfpv]

@@mariofpv can this vrx can feed signal from dji or any other digital sytem? Or it is standalone only openipc?

[@jojomajo]

Image so clear!

[@mariofpv]

In my goggles it is much more clear! Cheers mate!😊🍻

[@luastoned]

How hard would it be to get the video feed into a Quest 3?

[@mariofpv]

It’s possible but I don’t know how because I don’t own the Quest 3. Also the latency might be high. You can try and let us know. We are here to help you optimise your project. Cheers mate!😊🍻

[@luastoned]

@@mariofpvWith enough research it appears it should possible with an app called USB camera.. the only input on the Quest 3 is USB-C so it would be NVR -> HDMI cable -> HDMI capture card (usb-a/c dongle) -> Quest.. there is ofc the question if the NVR could directly provide the feed over USB..

[@mariofpv]

@luastoned currently the video output is only on HDMI.

[@hokuspokus8570]

What is max distance with this setup ?

[@mariofpv]

The WFBNG has 100km+ range which has been successfully tested by some users. I’m not going to publish any videos for obvious reasons. Cheers mate!😊🍻

[@AlfieMakes]

Is there a way to record locally on the drone?

[@mariofpv]

There is an expansion board for the camera that adds an SD card slot. In the future we will add this feature. We are still working on the ground station. Cheers mate!😊🍻

[@AlfieMakes]

@@mariofpv that sounds great. It would be super cool if you could record at higher resolution/bitrate and stream at a lower one. Would compete directly with the Air Unit from DJI at a much lower price 🎉🎉

[@anujchandkapoor]

I hope this replaces Walksnale and DJI HD System

[@mariofpv]

That’s not the purpose of OpenIPC. We are not competing with anyone. Cheers mate!😊🍻

[@anujchandkapoor]

@@mariofpv Thanks you for all your hard work hopefully one day your HD system will be easily available for people like me who cannot afford expensive HD systems like DJI or Walksnale.

[@joemck1235]

Bro that's amazing how do I get one very cool

[@mariofpv]

There’s a link in the video description. Cheers mate!😊🍻

[@panschiri]

How far can you fly?

[@mariofpv]

With my quadcopter my only limit is my battery. Cheers mate!😊🍻

[@panschiri]

@@mariofpv I mean distance.

[@fpvaprendiendoamodificar6359]

works for analog.

[@mariofpv]

It’s a digital FPV system that can work with any analog goggles as long as they have HDMI IN port. Cheers mate!😊🍻

[@Krash_fpv]

Someone gove me a list of actual parts I tried tbe website and am ao confused now

[@mariofpv]

I have posted a list on my KZbin community section. Please search for it. Cheers mate!😊🍻

[@azinfidel6461]

👍

[@mariofpv]

Cheers mate!😊🍻

[@David-ty6my]

Oh man, If this becomes like ELRS, I'm throwing out the DJI Digital ASAP. (If it is at least comparable in range/quality/latency that is) I'm open to more insights in how the code works, maybe I could help in the beginning of next year, I have a little C knowledge and interest in learning a bit more coding.

[@mariofpv]

We are now having 25ms glass to glass latency. The system runs at 120fps and costs 50$ all included! Cheers mate!😊🍻

[@David-ty6my]

@@mariofpv that is great! What range can I expect once it is in a mature state?

[@mariofpv]

The longest recorded range we had with the WFB link which is the same link of OpenIPC was 120km. Unfortunately on the returning the airplane crashed because it was left out of battery. We need bigger better batteries!🤣 Cheers mate!😊🍻

[@David-ty6my]

@@mariofpv that is INSANE range. I really hope this becomes the industry standard just like ELRS

[@Freebird_67]

This hopefully will keep the others cost down.

[@mariofpv]

For the moment it’s a work in progress project. Once we have the EU warehouse ready, I think we will see a big competition in the FPV systems. This could actually drop the prices. Cheers mate!😊🍻

[@gadgetman404]

Wish you would talk

[@mariofpv]

I did in the last week’s live of Let’s Drone out! I think I will start talking in my next videos. I was very shy but now I feel more confident. Cheers mate!😊🍻

[@Odinochk]

Датчик высоты не работает